Experience the Superior Performance of Swift Springs

Not all springs are made equal, and Swift Springs has invested years of expertise and research into perfecting the art of spring manufacturing. The result of their dedication is the innovative "HS5.TW" proprietary steel alloy, which sets a new standard in the world of springs. Swift Springs has successfully achieved several crucial objectives with this material, including:

• Consistently maintaining the spring rate throughout the stroke
• Offering the maximum possible stroke length
• Providing outstanding durability to prevent spring height loss
• Creating exceptionally lightweight springs

Founded in 1997, Swift Springs has built an impressive track record, catering to diverse applications ranging from oval track and dirt racing to the needs of enthusiastic street drivers. With a wealth of experience and a history of collaboration with world-class race teams and drivers, Swift Springs ensures they have the perfect spring to meet any demand.

Swift Springs understands that not all springs are created equal. While many springs may share similar dimensions and spring rates, the manufacturing process and materials used are pivotal to their performance. Drawing upon years of experience and extensive research, Swift Springs has refined the spring manufacturing process to perfection. In their relentless pursuit of excellence, Swift Springs developed a proprietary steel alloy known as "HS5.TW." This material accomplishes the primary objectives Swift had in mind:

• Maintaining the most consistent spring rate throughout the stroke
• Providing the largest amount of stroke
• Ensuring the highest durability against spring height loss
• Offering the lightest weight

Since its establishment in 1997, Swift Springs has taken on a diverse array of tasks and applications, ranging from oval track and dirt racing to enthusiastic street driving. They have accumulated invaluable experience working with world-class race teams and drivers from around the globe. Given the varied demands they've encountered over the years, you can have full confidence in Swift Springs to deliver the perfect spring solution for any requirement.

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

BMW F10 Rear Shock is an essential replacement part designed to restore the ride quality and performance of your BMW. Over time, potholes, speed bumps, and road hazards can weaken your suspension, leading to a rough and uncomfortable driving experience.

• Restores Ride Comfort: Replaces worn or damaged shocks to enhance ride quality and smooth out bumpy roads.
• Improves Performance: Addresses issues such as bottoming out and bouncing, ensuring a stable and controlled ride.
• High-Quality Construction: Engineered to meet or exceed OEM specifications, offering reliable performance and durability.
• Easy Installation: Designed for a direct fit, making the replacement process straightforward and hassle-free.

Revitalize your BMW’s suspension system with the BMW F10 Rear Shock to enjoy a smoother, more comfortable driving experience.