BMW Suspension Parts

If you are concerned about strut tower mushrooming and looking for improved handling, the M7 Strut Tower Brace (STB) is the solution. This is the ONLY strut tower brace on the market that features anti-mushrooming technology.

Repeatedly, we've heard the same complaint: strut towers mushroom after heavy impacts from shocks and low aspect ratio tires. Initially, the shock towers take on a barely visible convex shape, but if compared to the original sheet metal, you'll find the horizontal plane has moved as much as 3/8" upwards, making alignment nearly impossible.

This issue often shows up as a slight pull to the left or right, depending on which strut tower is affected. The M7 Strut Tower Brace's end mounting plates solve this problem by sandwiching the sheet metal and shock top plate, creating a reinforced surface that won't bend, even during hard impacts.

The M7 STB features 1/2" (13mm) thick end plates that add extra strength to the strut towers, preventing mushrooming and potentially costly repairs. The cross brace significantly improves handling by adding torsional stiffness to the front body structure, helping keep your tires planted and pointed in the direction you want to go, especially during hard turns. Machined from billet aluminum and matte black powder coated, the M7 Strut Tower Brace boasts a durable black finish that looks great and won't chip or oxidize.

We have customers who won't drive their new MINI off the lot without one and dealers that sell every new MINI with either the M7 Strut Reinforcement Plates or the M7 Strut Tower Brace.

Concerned about clearance? No worries. The M7 STB profile is designed to clear both stock and aftermarket cold air intakes and ECUs. Its modular design allows easy access to the oil filter or any other accessories that might normally be blocked and require removal of the entire brace.

Installation is a snap (often taking less than 20 minutes)! No need for new nuts—the brace uses the three stock nuts on each side. Installation instructions are available online by clicking the "INSTALLATION" link on this page.

The M7 Strut Reinforcement Plates and the M7 Strut Tower Brace are two separate products that address strut tower mushrooming (you only need one or the other).

If your MINI is mainly a daily driver, the M7 Strut Reinforcement Plates are sufficient. If you have performance driving in mind, the M7 Strut Tower Brace is what you're looking for!

Please note:

• You cannot buy the SRPs and attach the cross-bar at a later time.
• The brace does not directly fit on the R50 and R52 Non-"S" Cooper due to limited hood clearance of the non-supercharged cars. It will fit but may push up on the hood slightly, requiring molding or cutting of the hood insulation after installation.
• Trimming of the underhood insulation material may be required to fully clear this brace. This is a very tight space.

Enhance the handling and durability of your MINI with the M7 Speed MAXX-G High Performance Billet Aluminum Adjustable Rear Sway Bar Link Kit. This set of 2 direct replacement parts is compatible with all Gen 3 MINI Coopers and BMW X1 & X2 models. Crafted from CNC machined billet aircraft-grade aluminum, these sway bar links feature durable 90A durometer urethane bushings and forged steel adjustable tie rod ends. The design ensures over 10 times the strength and rigidity of the stock plastic parts, resulting in reduced compliance in the suspension system, improved sway bar response, and increased wheel rate for enhanced grip and control. With sealed and permanently lubricated tie rod ends and corrosion-resistant finishes, this kit guarantees longevity and performance. Upgrade your MINI's handling with the MAXX-G link kit, backed by a lifetime guarantee.

• Direct replacement for stock sway bar links
• Over 10 times stronger and more rigid than stock plastic parts
• Improved sway bar response and increased wheel rate
• Sealed and permanently lubricated tie rod ends for longevity
• Corrosion-resistant finishes for durability
• Lifetime guarantee for all parts

Enhance your BMW's handling with M7 MAXX-G Adjustable Swaybar Endlinks designed for lowered or raised MINIs. Crafted from forged SAE 4340 alloy steel, these endlinks offer superior strength and symmetry in cornering performance, allowing bind-free suspension travel and improved chassis balance. The adjustability feature ensures proper alignment, maximum grip, and neutralized sway bars for consistent balance in left and right-hand turns.

Benefits:

• Superior strength with forged alloy steel construction
• Symmetric cornering performance enhancement
• Bind-free suspension travel and better alignment
• Adjustable length for precise chassis tuning
• Corrosion-resistant black anodized finish
• Proudly made in the USA

M7 Speed Suspension Product for Generation 2 MINI Cooper Models (R55-R59)

M7 Speed proudly introduces a unique suspension product for the popular Generation 2 MINI Cooper models R55 through R59. These affordable vehicles are becoming the choice for many entry-level modifiers in the German performance car segment, and they are great for Rally Cross.

Engineered to transform the mild-mannered MINI into a more capable and versatile daily driver, this product is perfect for today’s lifestyle. Whether it's for spirited adventure motoring, weekend overlanding, living off the grid, or tackling pothole-riddled urban streets, the M7 Speed 2" Lift Kit makes it possible. By installing this lift kit, the MINI is elevated by 2 inches, plus an additional lift from larger diameter tires (up to an extra 1.5 inches). No additional modifications are required—simply bolt it in, perform a realignment, and enjoy! Add aftermarket wheels and larger tires to create a unique, durable, and practical vehicle that everyone will love.

The M7 Speed Stage 1 Kit includes everything needed for the transformation. This kit features precision-fabricated lift blocks and a set of MAXX-G heavy-duty adjustable front sway bar links. These shorter links are necessary to prevent suspension bind that can occur with stock-length sway bar links.

Stage 1 Kit Includes:

• 2" Lift Kit with high-strength assembly hardware (2 front riser blocks, 2 rear riser blocks)
• Set of MAXX-G Heavy Duty Adjustable Front Sway Bar Links
• Hardware kit with high-strength, proper-length bolts and new locking nuts

Features:

• Engineered using 3D CAD software and finite element simulation for proper fitment and safe, fail-proof performance
• CNC laser-cut parts
• Lightweight fabricated steel design
• Black urethane powder coating for corrosion protection and a quality appearance
• Designed for easy bolt-on installation, complete with all new high-strength hardware and installation instructions

MAXX-G Adjustable Sway Bar:

• Enhances cornering performance, provides bind-free suspension travel, improves suspension alignment, and overall chassis balance
• Features sealed and permanently lubricated forged steel ball stud & socket ends for easy installation
• Includes a military-grade aluminum adjuster sleeve with opposing RH & LH threads for simple length adjustments
• Replaceable link ends make maintenance easy

M7 Speed is the world leader in MINI adventure motoring, overlanding, and ultimate performance products. Renowned for exceptional customer service and product innovation, M7 Speed is dedicated to engineering and producing high-quality, easy-to-install aftermarket performance products. Located in Mooresville, North Carolina, also known as Race City USA, M7 Speed is at the epicenter of North American motorsports.

The MMX Performance adjustable drop links are a great choice for any lowered or hard-driven BMW to zero the pre-load on your anti-roll bar geometry. Plus, by replacing the stock rubber joints with motorsport-spec ball joint ends, you'll add valuable stiffness and precision to handling and steering dynamics.

The sway bar end link attaches the front anti-roll bar ends to the front damper. The OEM links were made the length they are for a reason, to complement the standard ride height.

When your ride height is altered, your vehicle's anti-roll bar ends are pulled up. With around 40mm of adjustable length, plus left and right threaded ends for easy length adjustment, the MMX adjustable sway bar end links allow you to adjust back to zero preload on your anti-roll bar - allowing it to operate exactly as it should once again.

Motorsport-spec ball joint ends using high-strength Teflon-lined steel means a much more direct response when turning into corners. By replacing the soft rubber bushing in the factory links with these motorsport-spec ball joints, cornering and steering responses are immediately sharpened. Importantly, rubber dust boots are fitted to protect the joints from road dirt and salt accumulation.

The lightweight CNC-machined T6-6061 aluminum bodies are anodized in our beautiful MMX gloss black coating to look good and stay looking good.

Features:

Manufactured in the UK from Aircraft grade T6-6061 aluminum billet.

Complete OE replacements

Anodized in signature MMX Gloss black.

Heavy-duty ball joints to ensure a long life span.

325-365mm adjustment range.

Direct replacement – can be used with either factory or Aftermarket rear anti-roll bar, and returned to standard at any time.

Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar.

Each heavy-duty, high-articulation rear end link attaches the rear anti-roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminum links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar.

As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage car.

Features:

Manufactured from Aircraft grade T6-6061 aluminum billet.

Complete OE replacements.

Our single-threaded ends make for easy length adjustment in-situ without having to detach and re-attach.

Each heavy-duty, high-articulation rear drop link.

Anodized in signature MMX Gloss black.

Heavy-duty ball joints to ensure a long life span.

Kit complete with everything you need.

Can be used with either factory or Aftermarket rear anti-roll bar, and returned to standard at any time.

Rubber boots for longevity and durability.

After much anticipation, we are pleased to release our lowering spring kit for the BMW M2 G87 platform! Taking our experience from our highly popular F-chassis offerings, the goal with this offering was to lower the M2 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.3"

Rear Lowering: 0.75"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

MINI R56 Front Left Loaded Front Strut provides a convenient and efficient solution for replacing your vehicle’s front strut, spring, and strut mount. This pre-assembled unit eliminates the need for special disassembling tools, as it comes fully assembled, allowing for a quicker and easier installation with standard hand tools.

• Pre-Assembled Convenience: Comes as a complete unit, saving time and effort during installation.
• Easy Installation: Designed for quick replacement with standard hand tools, no special tools required.
• Efficient Replacement: Ideal for restoring proper suspension function and ride quality without the hassle of disassembling individual components.
• Pair Replacement Recommended: For optimal performance and balance, it is advised to replace struts in pairs.
• Warranty: Comes with a 2-year/30,000-mile warranty, ensuring reliability and peace of mind.

After much anticipation, we are pleased to release our lowering spring kit for the BMW M3 G80 platform! Taking our experience from our highly popular F80 springs, the goal with this offering was to lower the M3 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.4"

Rear Lowering: 0.7"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.