BMW Sway Bar Kits

E36 325i/328i/M3 Turner Motorsport Front/Rear 30/24 Sway Bar Upgrade ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:339018

Part#: TMSSWAYE36M3-2

In Stock

Sale - Save 5% $ 664.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 631.74 USD

Add to Wish List

Sale - Save 5%

$ 664.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 631.74 USD

Add to Wish List

From years of racing the E36 in World Challenge we have discovered the E36 favors a larger front bar without over doing the size of the rear. This is the best combination we could find to reduce body roll while making handling as neutral as possible. These are the latest generation of our popular Turner E36 swaybars, now with CNC machined ends, two adjustment positions on each bar, re-countoured bends for better clearance, and one of the largest front solid sway bars available (30mm). We couldn't find a large front sway bar that we liked so we made our own - perfect for taming that understeer! These sway bars fit all 1992-1999 BMW E36 chassis, including the E36 M3, 325i, 325is, 328i, 328is, 323is, 318i and 318is (sorry, no ti). Perfect for street use and great for competition / track applications.

Fitment
These bars fit in the stock locations using the original brackets and links. Our bar has been designed to use either the non-M or M3 front sway bar links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs. The rear hardware has been upgraded in our kit to a M10 sized bolt and it can be a little tricky to install on the factory end link. To avoid pre-loading the bar, it is best to leave one side un-done until the car is lowered to the ground. Never connect both links to the same bar with the car off the ground. We strongly recommend installing our Turner E36 Rear Sway Bar Reinforcement Kit at the same time as any rear bar install.

Do I need adjustable sway bar links?
The adjustable sway bar links ensure that there is no pre-load on the bar and that the bar has the correct clearance to other suspension components. Pre-load is when the bar is slightly stressed when it's on the car. If you have to force the links to fit the bar because it has tension then you have pre-load. Adjustable links fix all of that because you can then shorten or lengthen the link to match the installation of the bar. If you have coil overs or the car is very low, you should definitely have the adjustable links because these conditions may contribute to the pre-load situation. Adjustable front or rear links can be added from the options listed below.

Setup
The bars are adjustable so any driver can find an ideal setup for the type of driving they are doing. The sway bar becomes stiffer in the holes furthest from the end of the bar. The holes at the very end of the bar are the softest setting. We would generally recommend starting out with the front bar set to the stiffer setting and the rear bar positioned in the soft setting. Adjust to your liking from there.

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic

Show More Show Less

E36/E46 Rear Adjustable Length Sway Bar End Links (Pair)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:53

Part#: TSU9913RS2

In Stock

$ 305.99 USD

Add to Wish List

Qty

$ 305.99 USD

Add to Wish List

These adjustable rear links are only required when using sway bar / swaybars with a suspension with a very low ride height, where it may be necessary to adjust the length of the end links for proper sway bar clearance from the drive axles or other suspension components. These suspensions are usually found only on race cars but this may also apply to street cars with sport springs/sport coil overs that are lowered a lot. On most street cars lowered 1.5" or less, the stock links will be fine.

These end links feature a Heim joint, which allows enough lateral movement when disconnected to adjust the length of the link without removing the entire link from the car. This is particularly helpful when eliminating or adjusting preload while tuning the suspension. Similar links without this joint, can't be adjusted without totally removing the link from the car.

Built-in grease fittings allow for occasional lube, and a packet of grease is included. These links are sold as a set, and include two end links and hardware for H&R and TMS sway bars (other brands may not need the hardware).

At their shortest setting they are 2.875" hole to hole and on their longest setting they are 3.5" hole to hole.

*Note: these links will not work with factory or non-adjustable Eibach sway bars.

Show More Show Less

Genuine BMW Sway Bar Mounting Bracket - Front - E34 E31 E32 E36 Z3 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7782

Part#: 31351131622

In Stock

$ 23.95 USD

Add to Wish List

Qty

$ 23.95 USD

Add to Wish List

Genuine BMW Stabilizer Support
This item fits the following BMW Chassis:
E36 M3,E34 M5,E34,E36

Turner Motorsport Custom Length Adjustable Front Sway Bar End Links (...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338618

Part#: TMS2104

In Stock

Sale - Save 5% $ 258.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 246.04 USD

Add to Wish List

Sale - Save 5%

$ 258.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 246.04 USD

Add to Wish List

Our renowned TMS adjustable front sway bar / swaybar links for BMWs are now available in custom lengths, making them easy to order for any aftermarket or custom suspension setups. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.

These end links offer the quiet operation and long life of "stock" BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the end link mounting stud / pin, as shown in our diagram.

Note for E9X M3: the unique mounting on the M3 strut requires a set of our adapter seats (#TSU9912AF9). You can add them with your links from the menu below.

TMS Part#Center to Center (mm)Center to Center (inch)

TSU9912A35155.00mm - 170.00mm6.10" - 6.69"

TSU9912A40170.00mm - 185.00mm6.69" - 7.28"

TSU9912A45180.00mm - 195.00mm7.08" - 7.67"

TSU9912A50190.00mm - 205.00mm7.48" - 8.07"

TSU9912A55207.00mm - 222.00mm8.15" - 8.74"

TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"

TSU9912A70240.00mm - 255.00mm9.45" - 10.04"

TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"

TSU9912A80261.00mm - 276.00mm10.28" - 10.87"

TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"

TSU9912A95290.00mm - 305.00mm11.42" - 12.00"

TSU9912110320.00mm - 335.00mm12.59" - 13.19"

TSU9912115330.00mm - 345.00mm12.99" - 13.58"

TSU9912130362.00mm - 377.00mm14.25" - 14.84"

TSU9912135370.00mm - 385.00mm14.57" - 15.16"

TSU9912140381.00mm - 396.00mm15.00" - 15.60"

TSU9912145389.00mm - 404.00mm15.31" - 15.91"

Please select your length below.

Show More Show Less

Genuine BMW Steel Rear Sway Bar Bracket Upgrade Pair - E39

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:348199

Part#: 33506779734KT

In Stock

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

The aluminum sway bar brackets on the rear of E39 models have a tendancy to snap. It's not a widespread problem but we have seen it a few times, on stock and upgraded sway bars. The stock bracket is soft aluminum and as it flexes it can snap. These upgraded bushing brackets are from the E38 7-series (and others) and are much stronger - and cheaper! - than E39 brackets. They are a direct replacement with the original hardware, however, upgraded urethane bushings may need some material trimmed away to fit better. Price is for the pair of steel brackets.

Show More Show Less

Performance Front Adjustable Swaybar End Link Set - E9x M3, E82 1 M ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588018

Part#: 025990TMS07

In Stock

Sale - Save 3% $ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 322.03 USD

Add to Wish List

Qty

Sale - Save 3%

$ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 322.03 USD

Add to Wish List

When lowering your BMW without changing your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Luckily, this can easily be remedied with our very own Turner Performance Adjustable Swaybar End Links! These adjustable end links are designed specifically for your lowered BMW, featuring heat-treated chromoly studs, Teflon lined 1/2" solid bearings with 65 degrees of articulation, CNC machined 6061 and 2024 aluminum shafts, and high-grade hardware for unparalleled performance and reliability. These end links are made 100% in America from American sourced parts and materials!

Show More Show Less

Turner Motorsport Performance Rear Sway Bar End Links - E82/88 E9X ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:637369

Part#: 025990TMS010

In Stock

Sale - Save 3% $ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 322.03 USD

Add to Wish List

Qty

Sale - Save 3%

$ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 322.03 USD

Add to Wish List

Looking to get the most out of your swaybar? We suggest upgrading to our brand new Performance Rear End Links. Our new line of F8X rear end links feature length-adjustability for eliminating preload on sway bars, Teflon lined FK 1/2" bearings which prove higher load capacities than stock rubber bushings, and heat-treated Chromoly High Misalignment studs that offer extreme articulation, 65 degrees in total, to prevent binding.

Show More Show Less

Performance Adjustable Front End Links - Pair - BMW E46 3-Series ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5471063

Part#: 00501TMS022

In Stock

Sale - Save 3% $ 330.99

This product was last offered at the strikethrough price on
06-14-2026

$ 321.06 USD

Add to Wish List

Qty

Sale - Save 3%

$ 330.99

This product was last offered at the strikethrough price on
06-14-2026

$ 321.06 USD

Add to Wish List

Turner's new Performance Front End Links feature massive Teflon-lined FK 1/2" Bearings to provide the highest load capacity for use with stiffer aftermarket sway bars. Custom heat-treated Chromoly High Misalignment studs connect to the sway bar and offer extreme articulation capability (65 degrees) to prevent the end link from binding when used with different adjustment holes on aftermarket sway bars. The end links are length adjustable to eliminate preload on the sway bars, which can result from uneven settling of springs or uneven suspension heights from corner weighting. Blue Anodized 6061-T6 aluminum turnbuckles work in conjunction with the left and right-hand threaded rod ends for simple and precise adjustment. These end links are perfect for street or race applications. Length: 9.9" to 11.4" Sold as a pair Made in the USA

Show More Show Less

Turner Front Sway Bar - E46 - 27mm

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:224300

Part#: E46-F27-SWAY

In Stock

Sale - Save 29% $ 422.99

This product was last offered at the strikethrough price on
05-03-2026

$ 299.00 USD

Add to Wish List

Qty

Sale - Save 29%

$ 422.99

This product was last offered at the strikethrough price on
05-03-2026

$ 299.00 USD

Add to Wish List

2 way adjustable 27mm front sway bar / swaybar for E46 323/325/328/330. Includes bushings.

Reduces body roll

Improves steering turn-in and handling
Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road.

We use an adjustable 27mm sway bar that has been fine-tuned for use on the E46 non-M models. Urethane bushings with a reinforced inner core that requires no lubrication are included. These bars are crafted from a special spring steel that is both stronger and more resilient than competitive sway bars. They have been shot peened and heat treated, and feature precision forged ends.

Fits RWD models only (not 325xi/330xi).

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

Show More Show Less

Performance Front Adjustable Swaybar End Link Set - F80 M3, F82/83 M4...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:588019

Part#: 025990TMS06

In Stock

$ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

When lowering your BMW without changing your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Luckily, this can easily be remedied with our very own Turner Performance Adjustable Swaybar End Links! These adjustable end links are designed specifically for your lowered BMW, featuring heat-treated chromoly studs, Teflon lined 1/2" solid bearings with 65 degrees of articulation, CNC machined 6061 and 2024 aluminum shafts, and high-grade hardware for unparalleled performance and reliability. These end links are made 100% in America from American sourced parts and materials!

Show More Show Less