Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E39 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. Made of hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

Fits the following vehicle:
1997-2003 E39 BMW 525i 528i 530i 540i M5

Worn or broken sway bar end links can significantly impact your vehicle's handling, preventing the sway bar from functioning properly. Restore your suspension performance with a high-quality OE replacement sway bar end link from Bremmen. Upgrading to new end links reduces body roll, improves cornering, and enhances overall driving dynamics—an excellent way to refresh your suspension system.

Common signs of failing sway bar end links include loose handling in corners, knocking noises, and a sloppy feel when driving over bumps. Fortunately, replacing them is straightforward and can be done by any automotive enthusiast.

Dinan has engineered this sway bar to work only with their Roll Control System to give the M5/M6 better balance in the corners.

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. The rear bar is non-adjustable. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

Dinan E60/E63 Sway Bar Specs:
R: 21mm, solid, 3-way adjustable, urethane bushings included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 E64 BMW M6

Dinan has a unique approach to fine-tuning the handling of the E60 M5, E63 M6 - to improve handling and not impact ride comfort they have engineered a way of stiffening the stock front sway bar while replacing the rear bar with a slightly larger bar. Instead of the traditional larger sway bar Dinan has come up with this way of stiffening the stock front bar. They have relocated the attachment point for the link to be further away from the end - effectively shortening the bar and making it stiffer. This has a number of advantages over a thicker aftermarket bar: lower cost, the bar does not have to be removed, no tradeoff in ride comfort. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned to reduce bodyroll, improve steering and turn-in response, and reduce understeer. This is the same setup as used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 2 point towards your Dinan badge.

The installation on the front bar requires drilling a hole on each end of the bar. The drilling and installation of the relocating bracket can be done with the sway bar still on the car. Detailed installation instructions are included.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 E64 BMW M6

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F22 and F30-F36 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. Both front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

Dinan F3X Sway Bar Specs:
F: 28mm, hollow, 3-position adjustable, urethane bushings and brackets included
R: 19mm, hollow, 3-position adjustable, urethane bushings and brackets included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i M235i
2012+ F30 BMW 320i 328i 335i - Sedan
2012+ F32 BMW 428i 435i - Coupe
2013+ F33 BMW 428i 435i - Convertible
2012+ F36 BMW 428i 435i - GranCoupe

Enhance Your MINI's Suspension with M7 MAXX-G Adjustable Swaybar Endlinks

Enhance the performance of your MINI's suspension with the M7 MAXX-G Adjustable Swaybar Endlinks. Whether your MINI is lowered or raised, these endlinks offer improved cornering performance, suspension alignment, and overall chassis balance. Engineered with forged alloy steel housings and permanently lubricated ball stud & socket design, they provide durability and bind-free suspension travel. The hex-shaped aluminum body allows for easy adjustment with hand tools, ensuring safe and precise tuning. These endlinks are quieter and longer-lasting compared to typical spherical rod ends, offering superior performance and reliability.

Benefits:

• Forged alloy steel main body for strength and durability
• Permanently lubricated and sealed OEM style ball stud & socket design
• Adjustable length for precise chassis tuning
• Hex-shaped aluminum body for easy adjustment with hand tools
• Bright Black Anodized for corrosion protection

MINI F55 F56 Front Stabilizer End Link

For Mini owners seeking enhanced stability and performance, the MINI F55 F56 Front Stabilizer End Link is a crucial upgrade. This end link is designed to provide improved handling and control, ensuring a smoother driving experience. Engineered with precision and durability in mind, it offers long-lasting reliability, making it an ideal choice for Mini enthusiasts.

• Enhances stability and performance
• Provides improved handling and control
• Ensures a smoother driving experience
• Engineered with precision and durability