When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

There are a few reason having a catch can is an upgrade for a vehicle, from a separator system that no longer works to one that was never there. Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits and carbon buildup in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence oil mist can in the intake charge even increase the risk of engine damaging detonation. 

With direct injected engines this problem becomes more prevalent, and the N54 in your 135i or 335i is no exception.  We're seeing a lot of N54 powered cars with drivability and performance issues due to significant carbon buildup in the intake ports and backs of intake valves.  The “factory fix” is a walnut blasting service that commonly needs performed every 30,000 to 70,000 miles.  Don't be part of this statistic!  Our shop recommends an oil catch can be installed in-line in the PCV system to help reduce the build-up of performance robbing deposits and greatly reduce the need for costly walnut blasting service and related repairs in the future.

​ The catch can utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The Turner Motorsport Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation. Another feature the Turner catch can has is the ability to add on a drain kit so you no longer have to fumble around getting the fill can out of a tight space. The drain can be run down to the belly pan of your car so draining can be done at the same time you change your oil or anytime in between.

*Click here for catch can instructions *

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• 8oz reservoir
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole - drain kit included!
• Driver side mounting kit - Designed specifically for your N54!

Upgrade your MINI with the M7 Oil Catch Can Kit__xxSTARTxx__/h1

The newly updated R55 through R57 Oil Catch Can kit for MINIs equipped with the N14 engine comes with a "designed-to-fit" stainless steel bracket, mounting hardware and pre-assembled hoses. Installation is super easy...no drilling and no special tools are needed. NOTE: This kit has been redesigned to fit on the firewall directly behind the outlet of the airbox. It uses the factory tab located on the firewall."Forum experts and social hysteria" say an OCC is not needed but we beg to differ. Why do so many MINI owners suffer from carbon buildup on their intake valve? The answer is oil being recycled through the intake tract to be burned. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup which leads to performance-hindering oil film and sludge along your intake tract, on your engine control sensors and on your engine's intake valves. Because the 2007 & up MINI is direct injection the intake valves do not benefit from the cleaning action provided by the gasoline as in older port injection engines. Now all the oil blow-by burns onto the intake valves and builds up into a flow choking hydrocarbon mess. The end result is loss of power and a very expensive repair bill. This oil film & sludge can appear in other critical places throughout the engine-- such as the intercooler-- where clean surfaces are critical for maximized heat transfer and on your MAF sensor (Mass Air Flow) where the film will cause the sensor to send a false signal to your ECU killing performance.

By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures that oil film and sludge will not become a factor in your vehicle's performance. If you don't think your engine is pumping oil back through your intake system, remove the breather tube and look at all the oil!. The breather tube connects directly to you intake hose and directs this oily mess back through your engine to be burned.

Now with our exclusive "Exact-Fit" pre-assembled hose kit and brackets installation is super-easy.

Features:

• Pre-assembled hose assemblies.
• Stainless steel bracket and mounting hardware
• Eliminate intake tract oil contamination and intake valve damage.
• Prevent pre-mature sensor failure
• Keep engine performance at peak levels
• Billet Aluminum Construction
• Bright Black Anodized Finish
• Laser Etched M7 Logo

The M7 Oil Catch Can is not only functional is a work of automotive performance ART! It is CNC machined from billet aluminum and adds a sharp look to your engine compartment.

All hoses, brackets, clamps, necessary fittings and easy to follow detailed step-by-step instructions are available on this page in .PDF format. The design includes an oil drain plug and an easy to view sight tube which indicated the oil level within the can. The hoses are high quality "Made in the USA" automotive grade designed to withstand the rigors of the under-hood environment and to not degrade when exposed to oil. Beware of other "low cost" catch can systems that use silicone hoses because oil and silicone are not compatible. Silicone hoses will will eventually deteriorate and make an absolute mess of your engine compartment.

R55-R59 Oil Catch Can Kit for N18 MINI Engines

Introducing the newly updated R55 through R59 Oil Catch Can kit for MINIs equipped with the N16 or N18 engine. This kit includes a "designed-to-fit" stainless steel bracket, mounting hardware, and pre-assembled hoses for easy installation—no drilling or special tools needed. Note: This kit has been redesigned to fit directly behind the outlet of the airbox on the firewall, using the factory tab located on the firewall.

Despite skepticism from "forum experts and social hysteria," an Oil Catch Can (OCC) is essential. Many MINI owners suffer from carbon buildup on their intake valve due to oil being recycled through the intake tract. With the M7 Oil Catch Can, your MINI Cooper's engine will be protected from excessive oil and hydrocarbon buildup, preventing performance-hindering oil film and sludge. Direct injection in 2007 & up MINIs exacerbates the issue, leading to oil blow-by burning onto intake valves, resulting in power loss and expensive repairs.

By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures optimal engine performance. Now with our exclusive "Exact-Fit" pre-assembled hose kit and brackets, installation is super easy.

Features:

• Pre-assembled hose assemblies
• Stainless steel bracket and mounting hardware
• Eliminates intake tract oil contamination and intake valve damage
• Prevents premature sensor failure
• Maintains engine performance at peak levels
• Carbon Fiber canister with billet bright aluminum top and bottom

The M7 Oil Catch Can is not only functional but also a work of automotive performance ART! It features a 100% carbon fiber housing with CNC machined billet aluminum top and bottom, adding a sharp look to your engine compartment.

All hoses, brackets, clamps, necessary fittings, and easy-to-follow detailed step-by-step instructions are included, along with an oil drain plug and an easy-to-view sight tube. The sight tube allows you to monitor the oil level in the can. The hoses are high-quality "Made in the USA" automotive grade, designed to withstand the rigors of the under-hood environment without degradation.

Upgrade your BMW MINI Cooper S with the M7 Oil Catch Can, designed to protect your engine by separating oil vapors from the crankcase air. This efficient system prevents oil contamination in the intake system, ensuring peak performance and preserving critical components.

Key Benefits:

• Oil Vapor Separation: Prevent excessive oil vapor from affecting the intake system, intercooler, and sensors, maintaining optimal performance.
• Protection from Contamination: Eliminate oil buildup in the intercooler and prevent damage to intake valves, ensuring efficient cooling of the compressed intake charge.
• Sensor and Component Preservation: Avoid premature sensor failure and sustain engine performance by preventing oil-related issues.
• Durable Construction: CNC machined from billet aluminum for both functionality and an aesthetic enhancement to your engine compartment.
• Multiple Finish Options: Choose from Silver, Black, or the new Carbon Fiber with billet bright aluminum top and bottom for a customized look.

This catch can is an easy DIY installation project, featuring high-quality "Made in the USA" automotive-grade hoses, ensuring durability and compatibility with oil exposure. Don't settle for silicone hoses that deteriorate over time and create a mess in your engine compartment. Trust in the M7 Oil Catch Can to safeguard your engine.

Enhance your R60/R61 Countryman and Paceman with the M7 Oil Catch Can Kit, meticulously crafted by M7 Speed. This kit is an ideal bolt-in solution, precisely tailored for the Mini Cooper platform, ensuring a seamless installation process without any modifications required. Featuring pre-assembled hoses and stainless steel mounting hardware, this catch can kit ensures hassle-free setup. It effectively prevents oil contamination in the intake tract, protects against premature sensor failure, and maintains consistent engine performance at its peak. Crafted from bright black anodized billet aluminum and stainless steel bracket, this catch can kit not only ensures functionality but also adds a sophisticated touch to your engine compartment.

• Exact-fit design with pre-assembled hose assemblies
• Prevents intake tract oil contamination and sensor failure
• Preserves engine performance at peak levels
• Durable construction with bright black anodized billet aluminum and stainless steel bracket

Upgrade your Mini's performance and durability with the NM Engineering Catch Tank. Machined from billet 6061 aluminum alloy and anodized for added surface durability, this catch tank effectively traps oil and moisture from blow-by gas, preventing carbon and sludge buildup in crucial engine components. Enjoy these benefits:

• Billet aluminum construction ensures durability.
• Prevents carbon and sludge buildup in the turbo, intake system, and engine.
• Easy disassembly for thorough cleaning and servicing.
• Patent Pending Locking Clip system for secure installation.
• Includes block-off plug for rear PCV port.
• Compatible with N14 engine applications.

M7 Oil Catch Can Kit for R60/R61 Countryman and Paceman

Introducing the complete and easy bolt-in "Exact-Fit" M7 Oil Catch Can kit for the R60/R61 Countryman and Paceman. Designed by M7 Speed, this kit is a perfect fit onto the R60/R61 Mini Cooper platform with no modifications required. Even the hoses are pre-cut and assembled to exact length! The kit includes a stainless steel bracket, stainless steel mounting hardware, and pre-assembled hoses for hassle-free installation—no drilling or special tools needed.

The "Exact-Fit" pre-assembled hoses eliminate the need to cut the factory breather tube, allowing easy restoration to stock configuration when it's time to sell your car.

Features:

• "Exact-Fit" Design
• Pre-assembled hose assemblies
• Stainless steel bracket and mounting hardware
• Eliminates intake tract oil contamination and intake valve damage
• Prevents premature sensor failure
• Maintains engine performance at peak levels
• Construction: Bright black anodized billet aluminum, Stainless steel bracket

The M7 Oil Catch Can is not just functional—it's a work of automotive performance art! CNC machined from billet aluminum, it adds a sharp look to your engine compartment.

Why install an M7 oil catch can? The M7 Oil Catch Can protects your MINI Cooper's engine from excessive oil and hydrocarbon buildup, which can lead to performance-hindering oil film and sludge on your intake tract, engine control sensors, and intake valves. With direct injection in 2007 & up MINIs, the intake valves don't get cleaned, leading to oil residue buildup. By capturing excess oil vapor and particles, the M7 Oil Catch Can ensures optimal engine performance.

The kit includes all necessary hoses, brackets, clamps, fittings, and easy-to-follow step-by-step instructions, as well as an oil drain plug and an easy-to-view sight tube. The sight tube lets you monitor the oil level in the can. The hoses are high-quality "Made in the USA" automotive grade, designed to withstand the under-hood environment without degradation.

Don't settle for less—choose M7 Speed products!
Engineered, tested, and proven to PERFORM!

Upgrade your Mini with the NM Engineering Catch Can Fitting kit, featuring a Patent Pending Locking Clip system for secure installation. Easily slip the adapter onto the OEM fitting, and the clip ensures a snug fit, preventing any backing out.

• Patent Pending Locking Clip system for secure installation
• Includes front and rear valve cover fittings
• Turbo inlet fitting included
• Comes with 40" 1/2" ID Hose
• Type III hard-anodized black for durability

Note: The pictured blue fittings are for display only. Suitable for N14 engine applications. Catch tank not included.