The RP-1 Race Rear Brake Pads 2021+ BMW M3/M4 / 2023+ BMW M2 (G80/G82/G87) are engineered to meet the extreme braking demands of high-performance driving. Designed by EBC, these premium rear brake pads deliver superior stopping power, fade resistance, and durability on the track, making them an ideal choice for competitive BMW enthusiasts. Optimized for the latest BMW G-series models, these pads enhance braking performance and provide an excellent pedal feel during intense driving conditions.

Key features:

Designed for 2021+ BMW M3/M4 (G80/G82) and 2023+ BMW M2 (G87) High-temperature resistance for consistent braking under extreme conditions Enhanced stopping power for optimal performance on the track Precision fitment for easy installation on BMW G-series models Superior wear resistance for extended lifespan Manufactured by EBC, a leader in performance BMW parts Ideal for the track or spirited driving, the RP-1 Race Rear Brake Pads bring a balance of performance, reliability, and durability to BMW enthusiasts, ensuring confidence in braking every time.

Upgrade your Mini's braking performance with EBC Redstuff Brake Pads, renowned for their quality and stopping power. Available in black, green, red, or yellow, these pads offer superior performance for daily and street driving. With excellent bite, low noise, and minimal dust, they provide a step above EBC Greenstuff pads. Pre-fitted with anti-noise features and a well-known break-in coating, these pads ensure optimal performance. Benefits include:

• Superior braking performance for Mini vehicles.
• Available in various colors for customization.
• Excellent bite for enhanced safety.
• Low noise and minimal dust for a cleaner appearance.
• Pre-fitted with anti-noise features for improved comfort.
• Recommended brake-in procedure for optimal performance.

MINI F55 to F57 Brake Pad Sensor - Front

The MINI F55 to F57 Brake Pad Sensor - Front acts as a critical wear indicator for your brake pads. This sensor alerts drivers when the brake pads are worn down and need replacement, helping to prevent potential damage and ensure safety. When the brake pads deteriorate, the sensor wears down and eventually triggers a warning light, indicating that the sensor must be replaced.

• Essential Wear Indicator: Alerts drivers when brake pads are worn and need replacement.
• Prevents Damage: Helps prevent potential brake system damage by providing early warnings.
• Maintenance Reminder: Triggers a warning light when brake pad replacement is needed.
• Replacement Recommendation: Should be replaced each time brake pads are replaced.
• Single Sensor Required: One sensor is needed for the front brake system.

The ultimate upgrade when it comes to improving stopping power!

Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.

EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.

This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.

Key Features:

Apollo-Series 6-Piston Calipers

Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs

Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads

Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines

Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid

Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

The ultimate upgrade when it comes to improving stopping power!

Complete with stunning, British-engineered six-piston calipers and all the hardware you need to completely replace all equivalent components of the front axle of your vehicle’s stock braking system, these complete kits give a firmer and more responsive brake pedal feel and allow you to drive much longer without the onset of brake fade.

EBC Racing Brake Kits come with fully‐floating 2‐piece rotors as standard. These rotors allow the cast iron rotor ring to float independently of the hub, preventing disc cracking and leading to reliable performance even when subjected to the most demanding driving conditions.

This kit comes with everything you need in the box and a detailed vehicle-specific installation pack, including race-spec brake fluid for the final system bleed.

Key Features:

Apollo-Series 6-Piston Calipers

Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design) Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging) High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris Lightweight, hard-anodized aluminium staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics Every single brake caliper pressure tested to 2,500psi Uses standard pad shapes, giving choice when selecting brake pads Fully-Floating Two-Piece Discs

Fully-floating 355x32mm two-piece discs that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends disc life and reduces the tendency for disc cracking during extreme use) Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time) Disc rings feature 48 directional internal curved vanes for improved cooling Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application Now featuring the latest thermic black corrosion-resistant finish – the very latest in rust prevention Bluestuff™ NDX Performance Brake Pads

Now road legal in most markets, Bluestuff™ NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions Stainless Steel Braided Brake Lines

Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking Super DOT 4 Brake Fluid

Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point – a significantly higher boiling point than standard DOT 5.1 fluid Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in fade

Introducing the MINI R Chassis Front Slotted EBC (Blade) Brake Rotors - Pair 11.57" (294x22)

A high-performance braking solution designed for MINI R Chassis vehicles. These brake rotors offer exceptional stopping power and durability, ensuring safety and performance on the road. With precision-engineered slots, they dissipate heat efficiently, reducing brake fade and maintaining consistent braking performance even under extreme conditions. Upgrade your MINI's braking system with these premium EBC brake rotors today.

• High-performance braking solution
• Exceptional stopping power and durability
• Precision-engineered slots dissipate heat efficiently
• Reduces brake fade for consistent braking performance
• Suitable for MINI R Chassis vehicles