M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

M7 Speed proudly introduces its new 100% silicone four-ply fiber reinforced intake hose, designed specifically for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly better airflow, and an almost unlimited service life. It not only performs exceptionally well but also adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out from other similar products by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This feature ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and straightforward installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

A silicone intake boot offers many advantages over the stock accordion-style boot:

• perfectly smooth interior surface (less turbulent air)
• stronger and more durable (no rips to create vaccum leaks)
• will not attract or radiate heat to the engine bay

This intake boot is the stock 3.0" size to replace the stock intake boot and delete ASC+T on E36 and Z3 models. Normally deleting ASC will require a new boot from a non-ASC model but this boot is stronger with a small power gain as a bonus. The Mishimoto E36 boot has a perfectly smooth interior finish with no sharp angles or other obstacles for the intake air to be slowed by. Installing this boot assumes your car either does not have traction control (ASC), or you will be removing it from your car. Removing ASC is a great way to decrease intake restriction, and this intake boot is perfect for this upgrade.

This boot has two ports to work on early and late E36 models. Early cars have vaccum and the crankcase vent hoses entering the intake boot. Later models only have the vaccum hose (the crankcase vent empties into the oil dipstick. We offer an intake boot plug for the later models to plug one of these holes. You can add one from the options below.

Choose from black, blue, or red silicone.

This Mishimoto silicone intake boot fits the following BMWs: 
1992-1995 E36 3 Series 325i, 325is & 325ic 
1996-1999 E36 3 Series 328i, 328is & 328ic (with ASC delete) 
1995-1999 E36 M3 3.0 & 3.2 (with ASC delete) 
1997-1999 Z3 Roadster/Coupe 2.3 & 2.8 liter 
1998-2000 MZ3 M Roadster/Coupe (S52 engine) 

A silicone intake boot offers many advantages over the stock accordion-style boot:

• perfectly smooth interior surface (less turbulent air)
• stronger and more durable (no rips to create vaccum leaks)
• will not attract or radiate heat to the engine bay

This intake boot is the larger 3.5" size to replace the adapter and stock intake boot and delete ASC+T on E36 M3 and MZ3 models. Normally deleting ASC will require a new boot from a non-ASC model but this boot is stronger with a small power gain as a bonus. And you don't need the HFM adapter used with most HFM kits. The Mishimoto E36 boot has a perfectly smooth interior finish with no sharp angles or other obstacles for the intake air to be slowed by. Installing this boot assumes your car either does not have traction control (ASC), or you will be removing it from your car. Removing ASC is a great way to decrease intake restriction, and this intake boot is perfect for this upgrade.

This boot has two ports to work on early and late E36 models. Early cars have vaccum and the crankcase vent hoses entering the intake boot. Later models only have the vaccum hose (the crankcase vent empties into the oil dipstick. We offer an intake boot plug for the later models to plug one of these holes. You can add one from the options below.

Choose from black, blue, or red silicone.

This Mishimoto silicone intake boot fits the following BMWs: 
1995-1999 E36 M3 3.0 & 3.2 (with ASC delete) 
1998-2000 MZ3 M Roadster/Coupe (S52 engine) 

MINI R52 R53 Silicone Intercooler Boots - Red are designed to enhance the performance and reliability of your MINI's intercooler system. These high-quality silicone boots are ideal for use with most aftermarket intercoolers and older versions of the DFIC. Their extended length ensures a superior seal between the intercooler core and the inlet/outlet horns, providing more surface area for a secure clamp fit.

The MINI R52 R53 Silicone Intercooler Boots offer several advantages:

• Enhanced Sealing: Longer boots provide a better seal, reducing the risk of leaks.
• Improved Fit: Tighter fit around both the intercooler and OEM intercooler horns prevents slipping.
• Increased Durability: Made from high-quality silicone for long-lasting performance.
• Easy Installation: Designed for straightforward installation with no special tools required.
• Color Options: Available in red, black, or blue to match your vehicle’s style.
• Proudly Made in the USA: Ensures high manufacturing standards and quality control.

ECS Silicone Coupler

Upgrade your BMW with the ECS Silicone Coupler. This straight 3 5/8" ID (92mm) x 3" L coupler is designed to enhance your vehicle's performance and durability. Crafted from high-quality silicone, it ensures long-lasting reliability and superior performance.

• Enhances vehicle performance
• Durable construction for long-lasting reliability
• Specifically designed for BMW vehicles

Upgrade your BMW or MINI with the BMW & MINI Silicone Coupler - Straight 2.38" (60.33mm). This high-quality silicone coupler is designed to provide a secure and leak-free connection for your vehicle's intake or cooling system. Engineered for durability and flexibility, it ensures optimal performance under various conditions. With its straight design and precise dimensions, this silicone coupler offers easy installation and a perfect fit for your BMW or MINI.

• Provides a secure and leak-free connection
• Engineered for durability and flexibility
• Straight design for easy installation
• Perfect fit for BMW and MINI vehicles