Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
The Alpha-N G90 M5 sedan carbon rear trunk spoiler is designed to deliver superior aerodynamic performance and a sleek, sporty look. This spoiler lip not only enhances your vehicle's appearance but also provides functional benefits by reducing lift and increasing stability at high speeds.
Product Details:
2x2 weave; pre-preg construction
Gloss finish
Alpha-N's V2 carbon rear diffuser for the G90 M5 or G99 M5 Touring is significantly more aggressive and functional vs the more OE-styled V1 piece. Featuring an integrated "underbody floor" section around the center of the diffuser, the V2 carbon piece both increases downforce and reduces drag vs the V1 variant.
All Alpha-N exterior parts are focused on functional aerodynamic improvements, and the G9X M5 V2 rear diffuser is no exception while also enhancing the rear styling.
Product Details:
2x2 weave; carbon pre-preg construction
Gloss finish
Upgrade your E36's exterior styling with this exclusive Enthusiast Bundle kit!
Turner Motorsport Smooth ABS Matte Black Diffuser - E36 M3
Features & Specifications:
Diffuser with curvature designed around the E36 body lines Designed in-house using state of the art 3d laser scanning and CAD technology for precision fitment Mounts to existing bumper insert mounting locations with OE hardware Made from lightweight, vacuum-formed ABS polymer, with UV-stabilized black sheet Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware LTW-Inspired ABS Front Lip - Matte Black
Features & Specifications:
LTW inspired design Vacuum formed ABS plastic with UV resistant construction 2-Piece bonded design for increased rigidity Designed by TMS engineers using 3D laser scanning & CAD for precision fitment Uses factory self-tapping screws for installation (Need new hardware? See T#599749) Includes pre-applied 3M double-sided adhesive for additional retention and a tight seal against the front bumper
Upgrade your E36's exterior styling with this exclusive Enthusiast Bundle kit!
Turner Motorsport Textured ABS Matte Black Diffuser - E36 M3
Features & Specifications:
Diffuser with curvature designed around the E36 body lines Designed in-house using state of the art 3d laser scanning and CAD technology for precision fitment Mounts to existing bumper insert mounting locations with OE hardware Made from lightweight, vacuum-formed ABS polymer, with UV-stabilized black sheet Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware LTW-Inspired ABS Front Lip - Matte Black
Features & Specifications:
LTW inspired design Vacuum formed ABS plastic with UV resistant construction 2-Piece bonded design for increased rigidity Designed by TMS engineers using 3D laser scanning & CAD for precision fitment Uses factory self-tapping screws for installation (Need new hardware? See T#599749) Includes pre-applied 3M double-sided adhesive for additional retention and a tight seal against the front bumper
Unlock Aggressive Style with Turner Motorsport's E36 M3 Street Flow Rear Diffuser Kit & ABS Front Lip!
Achieve an aggressive, cohesive design that enhances your M3's exterior appeal from front to back.
E36 M3 Street Flow Rear Diffuser
The E36 M3 has always been a head-turner, but the rear bumper often lacks the levelled look of the front. With BMW's signature design featuring a lower front bumper compared to the rear—an aesthetic seen across generations—this diffuser brings balance by matching the rear bumper’s height to the front, giving your lowered E36 M3 a sleek, grounded look.
Designed to add a bold edge to your M3, the Street Flow Diffuser is our latest innovation in aggressive styling, specially crafted to bridge the gap between factory lines and custom flair. Each piece is precision-engineered and powder-coated in satin black to perfectly complement the M3's factory trim. Easy to install, the diffuser seamlessly mounts to the rear bumper, ensuring a flawless fit and professional look.
The Street Flow Diffuser is a new venture for Turner Motorsport, diverging from our line of factory-replacement ABS and Carbon Fiber diffusers to deliver a design that pushes the boundaries. After extensive modeling and prototyping, we’re thrilled to debut this product, with more designs in the pipeline. Get ready to take your E36 M3 down a unique path in styling evolution.
Key Features:
Bold Appearance: Complements the OEM rear diffuser with an added aggressive look. Durable Construction: Made from lightweight 10-gauge aluminum, finished with a satin black powder coat for superior durability. Effortless Install: Adjustable slots and hidden color-matched hardware for a streamlined setup. Specifications:
Material: 10-gauge 5052 aluminum with black satin powder coat Design: 5-piece layout for easier installation and maximum fitment adjustment Extra Detail: Includes laser-cut ECS logo and concealed mounting hardware Turner Motorsport ABS Front Lip - Matte Black
An essential upgrade, this ABS Front Lip brings both visual impact and aerodynamic benefits to your M3. The front lip adds downforce for enhanced handling while maintaining a durable build to withstand daily driving conditions, including road debris and uneven surfaces.
Inspired by the E36 LTW design, Turner Motorsport’s ABS Front Lip is a cost-effective alternative to fragile carbon fiber lips. Made from UV-stabilized ABS plastic, this two-piece design resists cracking and shattering, offering a matte black finish that complements the original E36 aesthetic. For added versatility, this lip can be prepped and painted to suit your style preferences.
Features & Specifications:
Inspired Design: E36 LTW-inspired look in a robust ABS form Enhanced Durability: UV-resistant construction for long-lasting performance Precision Fit: Engineered using 3D laser scanning for optimal fitment Easy Install: Uses factory screws and includes pre-applied 3M adhesive for extra security Upgrade your E36 M3’s style with Turner Motorsport’s rear diffuser and front lip combo, adding aggressive lines that turn heads on the street and track alike!
Turner Motorsport G20 M340i/xDrive Skid Plate
The BMW M340i/xDrive's potent B58 engine, known for delivering incredible power, relies on a robust cooling system to handle the heat—especially with performance mods. One critical component, the low-mounted oil cooler, faces frequent hazards from road debris and parking obstacles, risking significant damage and costly oil loss if struck. A cracked belly pan can impair cooling efficiency, leading to dangerously high engine temperatures and exposing the oil cooler to potential impact.
This Turner Motorsport Skid Plate is crafted from 1/8" 5052 aluminum and engineered for strength and durability, safeguarding vital components without compromising BMW’s design. Featuring a convenient access door for oil changes, it’s an easy-to-install solution that retains OEM mounting points and aerodynamics while delivering unmatched protection.
Key Features:
Precision Fitment: No cutting, drilling, or modifications needed. Heavy-Duty 5052 Aluminum Construction: 1/8" main plate with lightweight 10-gauge aluminum side pieces. OEM Aero Compatibility: Preserves factory airflow design while improving ground clearance. Integrated Support Bracket: Reinforced frame-mounted support for extra durability. Convenient Maintenance: Access door for quick oil pan drain plug access. All Hardware Included: Includes stainless steel mounting hardware for corrosion resistance. Proudly Made in the USA: Designed with top-quality materials and craftsmanship.
Turner Motorsport Carbon Fiber Front Lip – G20 M Sport
Elevate your G20 M Sport’s aesthetic with the Turner Motorsport Carbon Fiber Front Lip—a stunning addition that adds sophistication and performance-driven design. Crafted from premium 2x2 twill carbon fiber, this lip is more than just eye candy; it seamlessly complements your car's factory lines while adding a bolder look with a touch of Turner Motorsport's signature styling. CAD-engineered for a precise fit, this front lip uses factory mounting locations, plus an extra adhesive layer for a secure, easy installation.
Features:
High-Quality 2x2 Twill Carbon Fiber: Strong, lightweight, and visually striking. UV-Protected Gloss Clear Coat: Ensures long-lasting shine and durability. Designed for OEM Precision: CAD-developed in-house for a flawless fit. Factory Mounting Points: No modifications needed—install with confidence! Don’t miss this limited-time opportunity to upgrade your G20 M340i/xDrive with unparalleled style and protection.
Give your E46 M3 a serious rear-end makeover! With this special Enthusiast Bundle, you'll amp up exterior styling, balance out the car’s look, and get a bold, aggressive finish.
E46 M3 Street Flow Rear Diffuser
While the E46 M3 is a visual icon, many enthusiasts feel that the factory rear bumper sits too high, creating an unbalanced appearance—especially for lowered models. Our Street Flow Rear Diffuser is here to address this. Inspired by BMW’s iconic front-to-rear styling mismatch, this diffuser aligns your rear bumper’s profile with the lower front bumper, giving your M3 a more cohesive and grounded look.
This add-on diffuser, with its satin-black powder coat, offers an aggressive, head-turning look while blending seamlessly with the factory styling. It fits directly beneath the stock rear diffuser and around your exhaust, creating a full-bodied, assertive profile that’s guaranteed to stand out. Perfect for enthusiasts seeking a bolder appearance without compromising factory fitment, the Street Flow Diffuser is the first release in our all-new series of add-on diffusers. Be on the lookout for future designs for the E36 and E92 M3 models!
Key Features:
Bold Styling: Enhances the stock diffuser for a more aggressive rear end Durable Construction: Made from lightweight yet strong 10-gauge 5052 aluminum Satin-Black Finish: Powder-coated for corrosion resistance and a factory-like appearance Precision Fitment: Adjustable installation slots for a perfect fit Seamless Aesthetics: Comes with hidden color-matched hardware and a laser-cut ECS logo for a premium look Specifications:
Material: 10-gauge 5052 aluminum Design: 5-piece construction for ease of installation and durability Mounting: Slotted mounting points for easy adjustments ABS High-Kick Rear Trunk Spoiler
Looking to bring more edge to your E46 coupe? The Turner Motorsport ABS High-Kick Trunk Spoiler adds that perfect sporty touch—without the high cost of carbon fiber. Designed for easy, drill-free installation, this spoiler transforms your trunk lid’s look with its high-kick style that complements the E46’s original body lines. Crafted from impact-resistant, UV-protected ABS plastic, this spoiler provides durability along with a polished, gloss black finish that catches the eye.
Using precision 3D laser scanning and CAD technology, Turner Motorsport developed this spoiler for a perfect fit that mirrors our premium carbon fiber version. With pre-installed double-sided 3M adhesive strips, you can apply this spoiler in minutes—simply clean, align, and press down for a secure fit that’ll turn heads.
Key Features:
Sporty Look: Enhances the E46’s lines with an aggressive, high-kick style Easy Installation: No drilling or permanent modifications required; mounts with 3M double-sided tape High-Quality Build: Made from lightweight, UV-resistant ABS for long-lasting looks Precision Fit: Designed using 3D scanning and CAD for factory-like fitment Specifications:
Material: Gloss black ABS plastic with UV stabilizer Installation Method: Pre-mounted 3M adhesive strips for secure mounting
G80 M3 Gloss Black High Kick Trunk Spoiler
Upgrade your G80’s rear with the Turner Motorsport Gloss Black High Kick Trunk Spoiler, engineered to enhance both the aesthetics and performance of your M3. This trunk spoiler is designed to flow seamlessly with your vehicle’s body lines, adding a sporty, aggressive edge while improving aerodynamics. Its high-gloss finish and motorsport-inspired shape will set your M3 apart from the crowd.
Crafted from durable, UV-stabilized ABS polymer, this spoiler is built to last while providing a sleek, high-performance look. No drilling, cutting, or modifications are required—just clean the trunk surface, apply the spoiler using the high-strength dual-sided tape, and you’re good to go. For a personalized touch, the spoiler can also be painted to match or contrast your vehicle’s color.
Features & Specifications:
Aerodynamic Design: High-kick shape enhances aerodynamics and adds an aggressive, sporty look. Durable Construction: Made from UV-stabilized ABS polymer for a long-lasting, high-gloss finish. Perfect Fitment: Designed to follow the factory body lines for a seamless integration. Easy Installation: No drilling or modifications required—simply adhere with pre-applied high-strength dual-sided tape. Customizable: Can be installed as-is or prepped for custom paint. G80/G82 Gloss Black Rear Diffuser
Elevate your M3’s exterior with the Turner Motorsport Gloss Black Rear Diffuser. Designed to perfectly complement the aggressive styling of the G80 and G82, this diffuser features a deep profile and bold fin design that enhances the rear bumper’s contours. Crafted from lightweight, vacuum-formed ABS polymer, it’s both durable and sleek, ensuring that your M3’s rear end gets the attention it deserves.
This direct-fit upgrade uses existing factory mounting locations and hardware, making installation simple and hassle-free. The diffuser’s design adds dimension to the rear of the vehicle, accentuating the exhaust exits and giving the car an even more dynamic presence. Whether you're upgrading to larger exhaust tips or simply want to enhance the look of your M3, this rear diffuser is the perfect choice.
Features & Specifications:
Aggressive Styling: Deep profile with bold fins and outlined design accentuates the G80/G82’s rear bumper and body lines. Perfect Exhaust Fitment: Designed to house quad 4.0" exhaust tips, perfect for both upgraded and factory exhaust systems. Precision Engineering: Developed in-house using advanced 3D laser scanning and CAD technology for a precise fit. Durable Construction: Made from lightweight, UV-stabilized gloss black ABS polymer for a durable, weather-resistant finish. Easy Installation: Direct-fit design mounts to factory locations with supplied hardware—no modifications required. Take your G80 or G82 M3 to the next level with this performance-inspired Enthusiast Bundle. Featuring the Turner Motorsport Gloss Black High Kick Trunk Spoiler and Rear Diffuser, this kit delivers aggressive styling, enhanced aerodynamics, and easy installation. Perfect for those looking to make a statement on the road, this upgrade combines precision engineering and OEM+ fitment for the ultimate performance aesthetic.
Performance Cat-Back Exhaust - E82/E88 135:
Lightweight cat-back featuring an exotic exhaust note. Designed for the perfect blend of performance and functionality!
Prepare to give your 1 series the boost it deserves. This cat-back exhaust was made to redefine the driving experience of your 135. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust- flow and tuned exhaust note, we are very excited to get these exhausts on 135's everywhere, don't wait!
Featured on the ECS Tuning YouTube Channel!
When crafting the ECS exhaust systems, their primary focus is on achieving the perfect balance of sound and comfort. ECS's understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. The exhaust for your 135 incorporates this balance, offering a strageic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N55 cars like the E9x series, they have engineered an exhaust packed with innovative features, compatible with both factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.
There is something about a cat-back exhaust that is just so good. Being able to unbolt and replace the entire visible exhaust gives you butterflies in your stomach. A fresh new exhaust and just knowing that things are about to get rowdy. This exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket down-pipes. The dual 2.5" mid-pipes make their way toward the rear axle and converge into a single 3" exhaust section. The 3" exhaust section snakes through the rear section of the car making smooth dips and curves to make its way into a light-weight 3" turbo style muffler. Don't be fooled by the 135 muffler, the size is nothing but deceiving. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both tone and volume. Paired with the 3" muffler is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.
Although both N54 and N55 share identical exhaust geometry, the N55 mid-pipes do not feature secondaries. Though the N55 cat-back is compatible with N54 downpipes this is not suggested. Supposedly this N55 catback sounds absolutely glorious on an N54, even with aftermarket downpipes.
Features and Benefits:
Street/Motorsport inspiration Enhanced exhaust note Full exhaust replacement 25% lighter than stock! Stock cat-back: 56lbs ECS cat-back: 42lbs Reduction in back pressure for increased throttle response, TQ, and HP Dual 3.5" fitted exhaust tips Part Design:
In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout Dual 2.5" Stainless Steel Mandrel Bent Tubing T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment. Strategically placed slip joints provide the most adjustability to obtain perfect fitment Kit Contents:
Dual 2.5" mid-pipes 3" Rear exhaust section 3.0" free-flowing muffler section for better sound, and performance Clamps and Hardware for an OEM+ install Optional 3.5" ECS exhaust tips
Textured Black Rear Diffuser - E82/E88 M-Sport:
Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.
The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.
Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.
For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.
Features and advantages:
Transformative Enhances the rear aesthetic of the 1 Series Direct fit utilizing factory clip locations and hardware Available in Textured Matte Black and Gloss Black Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer Compatible with both E82 and E88 models equipped with the M-Sport Package
E46 M3 Performance Valved Cat-Back Exhaust:
The wait is finally over, if you have been driving your E46 M3 around with a stock exhaust or are looking for your final exhaust setup we have you covered! Welcome to the world of ingenious designed exhausts that can meet your every driving need. Our new E46 M3 catback Exhaust is a stunning example of both engineering and art with sounds to please your ears and a sight to remember. Our catback is a lightweight and free-flowing exhaust that features two independent valved mufflers and a brilliant mounting system that is a pleasure to install and easy to perfectly dial in the exhaust fitment. Weighing 19lbs or less than your factory exhaust, featuring mufflers specifically designed for the S54 this exhaust is able to provide two completely different driving experiences.
With the exhaust valves closed the refined driving experience will blow your mind; while daily driving with closed valves there is a perfect bump in volume over the factory exhaust which allows you to hear and feel your rpms with a smooth exhaust note that shows your true passion for your iconic vehicle.
Now on to the real action, what you have always wanted but never wanted to commit to. Some days you just want to put the pedal to the floor with unlimited amounts of exhaust volume with your high revving 6 cylinder. Here is your opportunity to unleash the pure sound of your S54 while having the choice to change back to a respectable volumed exhaust. With the valves open this exhaust is an absolute symphony. Starting off from a stop with the valves open there is a significant increase in volume over the valves closed. When entering in to the 2000 rpm range you begin to experience the slightest taste of how satisfying the exhaust is going to sound. As you approach 4,000 rpms and higher you now have started to open up the can of worms, you can feel the free-flowing path of the exhaust with limited to no resistance, far superior to the factory exhaust. Anything after 6500 rpms is an absolute statement of exhaust. Over 6500 rpm is a sonorous note that lives rent free in the enthusiasts mind that can make a believer out of anyone who doubted the capable E46 M3. Once you are done having your fun and have experienced your S54 more than you ever have all you do is make one button click on your valve controller and you are back to high class and refinement. Truly the best of both worlds and a school girl giggling experience anytime you want.
Featured on the ECS YouTube Channel - CLICK HERE FOR SOUND CLIPS!
Features and Benefits:
19lbs or more weight savings from your factory exhaust
In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Retains factory emissions
Compatible with factory headers/front sections
Compatible with aftermarket headers/front sections that mate up to the factory rear section
Utilizes factory exhaust hangers
Adjustable fabricated sheet metal muffler brackets
Integrated x-pipe for improved exhaust note
Mandrel-bent dual 2.5" 304SS pipe
High flow dual valved, stainless steel mufflers
Vacuum actuated valves
Accuseal slip fit joints
All muffler exits are used for valves open and closed
2.5” Muffler exits for a variety of 3.5" tip options
Kit Contents:
E46 M3 mid section with integrated X-Pipe
Dual Turner S54 valved mufflers
Dual valve actuators and 2 remote key fobs
Exhaust Gaskets and Hardware
New center exhaust hangers
Optional Turner 3.5" Brushed or Chrome tips
Optional muffler hanger removal pliers
- Click HERE for Installation Instructions -
PRODUCT DEVELOPMENT:
Our Turner E46 Valved Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
E46 M3 Euro Style Carbon Front Lip:
Our unique and carefully designed front lip for the E46 M3 focuses on enhancing the car's aesthetics while preserving its natural beauty. This front lip is constructed of high-gloss, 3mm thick, 2x2 carbon fiber that adds a tasteful accent to the bumper while being strong and lightweight!
This aesthetic piece was crafted to stand out from other options available on the market by incorporating design elements that draw inspiration from the stock bumper but reimagines them in a way that sets it apart. Rather than overcomplicating the car's body styling, the goal was to seamlessly integrate the front lip with the existing design. This approach aims to enhance the car's body styling rather than overshadow it.
This versatile design is suited for both track use and everyday driving on the streets. Our E46 M3 front lip was designed to strike a balance between uniqueness and performance oriented aesthetics, while complementing the car's existing design. This is a clear cut choice front lip for someone looking to enhance the look of their M3.
Once you see your M3 with this front lip from, you will no longer think the front end is complete without it. Rounding out the near perfect car, this front lip completes the front end by filling out the open space underneath and sets the stage to enjoy the timeless body styling incorporating a curvature that compliments the front bumper.
Features & Benefits:
High-Gloss
Beautiful flowing carbon weave
Strong and lightweight
Updates the bumper with carbon appearance that enhances the existing body lines
Motorsport styling
Enhanced lowered appearance
Design:
CAD designed in-house for precision fitment
3mm 2x2 carbon fiber shell securely mounted at strong mounting points along the whole surface where the lip mates to the bumper
Front leading edge helps compliment and accentuate the forgotten body lines to add an aggressive yet subtle flare to the front end
Attaches to the front bumper with self tapping screws, plastic riv-nut and 6mm 3m adhesive tape to securely mount
Installation hardware included
Installation:
Mounts to the bumper using factory hardware combined with self tapping screws, plastic specific rivnut and hardware for securing the center posts. Requires drilling the underside of the bumper. Riv-nut installation tool included.
Turner Motorsport G20 330i/xDrive Skid Plate
BMW’s G20 330i/xDrive delivers thrilling performance, but the design leaves the oil cooler vulnerable to road debris. Positioned low and facing the road, the stock oil cooler is at risk from hazards like branches, ice, and even road scraps, which can puncture the factory plastic belly pan and cause sudden oil loss. Turner Motorsport’s Skid Plate provides robust protection to prevent costly damage and ensure your vehicle’s cooling system stays intact.
Crafted from 1/8” 5052 aluminum, this skid plate combines strength and minimal weight, offering one of the lightest metal options available. The design preserves the G20’s factory aerodynamics, ensuring optimal airflow around the oil cooler for effective heat dissipation. No modifications are required for installation, as the skid plate mounts securely using your BMW's original hardware.
Key Features:
Quick, Modification-Free Installation: No cutting, drilling, or extra hardware required. Durable 5052 Aluminum Construction: 1/8” main plate and 10-gauge aluminum side pieces for lightweight yet solid protection. Factory-Optimized Aero Design: Enhances ground clearance while maintaining BMW’s cooling efficiency. Built-In Frame Support Bracket: Reinforced structure for added stability. Preserves Wheel Liner Fitment: Designed to keep all original mounting points. All Hardware Included: Supplied with stainless steel mounting hardware. Proudly Made in the USA: Precision-engineered for quality you can trust.
Turner Motorsport G20 330i/xDrive M-Sport Carbon Fiber Front Lip
Take your G20’s style to the next level with Turner Motorsport’s exclusive M-Sport Carbon Fiber Front Lip—a sleek addition that balances aggression with elegance. Expertly CAD-designed for seamless fitment, this 2x2 twill carbon fiber lip blends perfectly with your factory body lines, adding a bold, sporty look without compromising BMW's original aesthetic. This high-quality carbon fiber piece installs easily using factory bumper mounting locations and includes an adhesive for extra stability.
Features:
Premium 2x2 Twill Carbon Fiber: Lightweight, high-strength material with show-stopping appeal. UV-Protected Gloss Finish: Maintains a long-lasting shine. Perfect OEM+ Fitment: CAD-designed in-house to match factory mounting points precisely. Simple Installation: Uses original mounting locations and 3M™ double-sided adhesive for added security.
Turner Motorsport High Kick Trunk Spoiler & Rear Diffuser Combo for G87 M2
Transform your G87 M2's rear end with this exclusive Doorbuster kit, featuring a High Kick Trunk Spoiler and Rear Diffuser in a sleek gloss black finish. These components offer an OEM+ aesthetic that takes your vehicle's style to the next level—all in one easy upgrade!
G87 M2 Gloss Black Rear Diffuser Upgrade the rear profile of your G87 M2 with Turner Motorsport’s ABS Rear Diffuser, designed in-house for a bold, aggressive look. Crafted to perfectly replace the factory diffuser, this deep-profile piece adds a dynamic finish to your car's rear end. Its signature fins and defined lines emphasize the M2’s sporty character and house quad 4.0” exhaust tips for a cohesive, powerful appearance.
Installation is hassle-free, using factory mounting points and hardware. Just remove your original valance, align the tabs, and snap the diffuser into place for a secure, precise fit.
Features & Specifications: Transformative Design: Accentuates the G87's body lines with a bold, aggressive profile. Perfect Exhaust Fit: Houses both upgraded and factory quad 4.0” exhaust tips seamlessly. Precision Engineering: Developed in-house with advanced 3D laser scanning and CAD for exact fitment. Durable Material: Made from UV-stabilized gloss black ABS polymer for a lightweight, weather-resistant finish. Easy Installation: Direct fitment with factory clip locations and hardware—no modifications needed. G87 M2 Gloss Black High Kick Trunk Spoiler Bring a race-inspired look to your G87 M2 with Turner Motorsport’s High Kick Trunk Spoiler. Designed with motorsport aesthetics in mind, this spoiler enhances both the style and aerodynamics of your vehicle. Its high-kick design provides a sleek, aggressive appearance that complements the car’s lines and adds a performance-driven edge.
Crafted from durable, UV-stabilized ABS polymer, this gloss black spoiler is built to last and deliver a premium look. Installation is easy and drill-free—just clean the surface, peel off the liner from the pre-applied high-strength dual-sided tape, and press firmly to adhere. For a personalized touch, the spoiler can also be prepped and painted to your desired color.
Key Features: Sporty, High-Kick Profile: Adds a dynamic, race-inspired look that follows the vehicle’s natural curves. Durable Finish: UV-stabilized gloss black ABS for a lasting, high-shine appearance. Seamless Integration: Engineered to match the M2’s factory appeal with no modifications required. Easy, No-Drill Installation: Pre-applied dual-sided tape provides a secure fit—no drilling, cutting, or modifications needed. With this combo kit from Turner Motorsport, transform the look and feel of your G87 M2’s rear end and add a performance-focused aesthetic that stands out on the road.
Carbon Fiber Trunk Spoiler
When designing the E46 M3 CSL, BMW opted for a high-kick trunk spoiler, a stylistic choice many enthusiasts deem a perfect addition to their BMW's exterior. This aggressive exterior addition instantly transforms both performance and overall aesthetics, making it an important modification for any performance-inspired build.
Opting to transfer CSL styling to the newest 2-series, Turner Motorsport decided to go above and beyond. Manufactured from hand-laid epoxy resin 2x2 twill weave carbon fiber, this piece is sure to add a race-track appearance to your BMW. The carbon fiber high-kick trunk spoiler was designed in-house using state-of-the-art 3D laser scanning and CAD technology to ensure optimal integration with vehicle bodywork. Turner's engineers paid close attention to factory trunk, roof, and rear bumper details to mirror existing styling with this piece, creating a blended look and OEM presentation.
Thanks to the included pre-applied adhesive tape, this spoiler installs without cutting, drilling, or permanent modification. Once the spoiler is aligned with your trunk, simply remove the backing on the double-sided tape, clean the mounting surfaces, and press the spoiler onto the trunk lid.
Features:
Mimics the lines of the trunk lid and roof contours to accentuate OEM features
Designed in-house at Turner using state-of-the-art 3D laser scanning and CAD technology for precision fitment
Includes pre-applied adhesive tape for easy install
Made from lightweight, hand-laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured
Clear coated for excellent finish durability and UV resistance
Can be painted for a color-matched look with standard body shop prep work
Gloss Black Diffuser
Enhance the look of your G87 with the Turner in-house designed ABS Rear Diffuser, meticulously crafted for a bold style upgrade. Engineered to seamlessly replace your factory diffuser, this upgrade transforms the rear profile with its striking deep profile and aggressive fin design, exclusively crafted by Turner Motorsport to command attention.
The diffuser's design accentuates the sleek contours of the G87, elevating its aesthetic appeal. Installation is effortless, requiring no modifications. Simply uninstall the current valance, align the tabs, and securely fasten the diffuser into place using the factory hardware and mounting points. Confirm a perfect fit by ensuring tab alignment, then effortlessly secure them with a gentle press for a flawless finish.
Features & Specifications:
Transformative Designed to accentuate the G87 body lines Mimics the lower section of the bumper with added character to amplify OEM features Perfectly houses quad 4.0" exhaust tips for upgraded and factory exhausts Designed in-house using state of the art 3d laser scanning and CAD technology for precision fitment Direct fit utilizing factory clip locations and hardware Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer
The Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish | BMW G80 M3 G82 M4 is a premium accessory designed to transform the look and performance of your BMW. Expertly hand-crafted in-house with ABE type approval, this chopped carbon fibre diffuser is engineered to accentuate the Akrapovič exhaust tailpipes, delivering a bold and sporty aesthetic. The matte finish adds a modern, sophisticated touch, while the lightweight construction ensures improved performance. Compatible with BMW G80 M3, G82 M4, xDrive, CSL, LCI, and M4 (G83) Competition models, this diffuser is a perfect blend of style and functionality.
Upgrade your BMW with the Akrapovic Rear Forged Carbon Fibre Diffuser - Matte Finish and enjoy a perfect blend of style, performance, and craftsmanship.
The Akrapovic Rear Carbon Fibre Diffuser - Matte Finish | BMW G87 M2 is a premium styling upgrade designed to elevate the look and performance of your BMW. Expertly hand-crafted in-house by highly skilled technicians and featuring ABE type approval, this carbon fibre diffuser is engineered to highlight the tailpipes of the Akrapovič Slip-On Line (Titanium) exhaust, delivering a bold and sporty appearance. The matte finish adds a sleek, modern touch, while the lightweight construction ensures improved performance. Available in both high-gloss and matte finishes, this diffuser is a perfect addition to the BMW G87 M2, combining style and functionality.
Upgrade your BMW G87 M2 with the Akrapovic Rear Carbon Fibre Diffuser - Matte Finish and enjoy a perfect blend of style, performance, and craftsmanship.
The Akrapovic Rear Wing Forged Carbon Fiber - G22 G23 G82 G83 is a premium aerodynamic upgrade designed for BMW M2, M240i, and other compatible models. Crafted from lightweight, handcrafted chopped carbon fibre and finished with a high-gloss lacquer, this rear wing combines striking aesthetics with motorsport-inspired performance. The swan neck design, supported by CNC-machined aluminium brackets, ensures an optimal balance between weight reduction and structural strength. High-grade titanium reinforcements at pivot points enhance durability, while the aerofoil design maximizes downforce and minimizes drag for superior handling. Fully adjustable to three levels, this wing allows drivers to customize their setup for peak performance. ABE approved with KBA 31882 type certification, it is road-legal and features an understated Akrapovič monochrome logo on each side for a refined touch. Optimized using computational fluid dynamics (CFD), this wing ensures minimal air turbulence and noise, making it a perfect fit for BMW G22, G23, G42, G80, G82, G83, and G87 models.
Upgrade your BMW with the Akrapovic Rear Wing Forged Carbon Fiber and experience the perfect blend of cutting-edge aerodynamics and premium craftsmanship.
Akrapovic Rear Chopped Carbon Fibre Diffuser - Matte Finish | BMW G87 M2 enhances the aggressive styling of the BMW G87 M2 with a premium, handcrafted design. Manufactured in-house by expert technicians, this lightweight chopped carbon-fibre rear diffuser is engineered to perfectly complement the Akrapovic Slip-On Line (Titanium) exhaust system, accentuating its bold tailpipes. With ABE type approval, this diffuser ensures both style and functionality while maintaining high durability and precision fitment.
The Akrapovic Rear Carbon Wing - BMW G22 G23 G82 G83 is a high-performance aerodynamic upgrade designed for BMW M4, M440i, and other compatible models. Crafted from lightweight, handcrafted carbon fibre and finished with a high-gloss lacquer, this rear wing combines stunning aesthetics with motorsport-inspired functionality. The wing features a swan neck design mounted on CNC-machined aluminium brackets, optimized for the perfect balance between weight and performance. High-grade titanium reinforcements ensure structural stability at pivot points, while the aerofoil design maximizes downforce and minimizes drag. Fully adjustable to three levels, this wing allows drivers to fine-tune their setup for optimal performance. Approved with ABE and KBA 31882 type certification, it is both functional and road-legal. The understated Akrapovič monochrome logo on each side adds a touch of sophistication to this high-performance accessory.
Upgrade your BMW with the Akrapovic Rear Carbon Wing and experience the perfect blend of motorsport performance and premium design.
The Akrapovic Rear Carbon Wing - BMW G20 M330i M340i G80 M3 is a high-performance aerodynamic upgrade designed for BMW M3, M330, M340i, and other compatible models. Crafted from lightweight, handcrafted carbon fibre and finished with a high-gloss lacquer, this rear wing combines stunning aesthetics with motorsport-inspired functionality. The wing features a swan neck design mounted on CNC-machined aluminium brackets, optimized for the perfect balance between weight and performance. High-grade titanium reinforcements ensure structural stability at pivot points, while the aerofoil design maximizes downforce and minimizes drag. Fully adjustable to three levels, this wing allows drivers to fine-tune their setup for optimal performance. Approved with ABE and KBA 31882 type certification, it is both functional and road-legal. The understated Akrapovič monochrome logo on each side adds a touch of sophistication to this high-performance accessory.
Upgrade your BMW with the Akrapovic Rear Carbon Wing and experience the perfect blend of motorsport performance and premium design.