BMW Aero & Body

Upgrade your MINI's appearance with the JCW GP II Rear Diffuser Kit, designed to add a high-performance look to your vehicle. This kit allows you to seamlessly integrate the JCW GP II rear diffuser with the JCW Aero rear bumper section, enhancing the overall aesthetic of your MINI. Designed to match the gloss black JCW aero kit trims, this kit includes textured OEM finishes on the underside to maintain a Genuine MINI look. Whether you're adding it to a stock JCW bumper or pairing it with other gloss black accessories, this kit ensures a sleek and cohesive design.

• Adds a high-performance look to your MINI
• Seamless integration with JCW Aero rear bumper section
• Matches gloss black JCW aero kit trims
• Textured OEM finish maintains Genuine MINI appearance
• Includes all necessary brackets and hardware for installation

Upgrade Your MINI with Euro Look Wheel Arch Kit

This comprehensive kit transforms your USA Spec MINI's wheel arches, achieving a clean Euro appearance while removing front amber and rear red side markers. Now available in Gloss Black, resembling Genuine MINI trim!

• Compatible with NON JCW Aero, NON Sport Aero, Sport Aero, JCW Aero Body kit cars
• Textured finish resembling Genuine MINI parts
• UV resistant gloss black flexible gel coat
• Pre-installed wheel arch clips for convenience
• Includes 4 wheel arches (2 front, 2 rear)
• Simple installation process, replacing old trims effortlessly
• OES supplier

Get an edge at the racetrack or just add some more style to your BMW. The ADRO carbon fiber canards will be an easy-to-install modification for any M car.

For the most part, canards are universal, but ADRO specifically designed these to fit the styling of both the BMW F80 M3 and F82 M4. These canards are subtle, made from the highest-quality handcrafted carbon fiber, and are proven to increase downforce for better cornering performance.

This is one of the easiest ways to get both a cosmetic and a performance benefit in one product that doesn't require a ton of installation time. Get ready to dominate the street and the track with these carbon fiber front bumper canards for the BMW M3 and M4.

Includes:

• 2 Carbon fiber canards
• 3M Tape
• Installation manual

Enhance the allure of your E46 M3 with Turner Motorsport's Gloss Black Front Lip, meticulously crafted to complement and not overshadow the natural beauty of the car. This front lip attaches seamlessly to the bumper without modifications, offering a more complete bumper appeal and the illusion of a lower ride height. Turner's design philosophy focuses on integration, drawing inspiration from the stock bumper while setting it apart with reimagined design elements.

Designed for both track and street use, this front lip seamlessly integrates with the existing design, completing the front end and filling the open space underneath. The curvature complements the front bumper, ensuring your M3 stands out with timeless body styling.

Features & Benefits:

• Motorsport styling
• Enhanced lowered appearance
• Installation hardware included
• Crafted from UV stabilized ABS polymer
• CAD designed in-house for precision fitment
• Compatible with factory and Turner Motorsports skid plates

Installation:

• Mounts to the bumper using factory hardware, self-tapping screws, plastic-specific rivnut, and center post hardware
• Requires drilling the underside of the bumper
• Riv-nut installation tool included

High Kick Trunk Spoiler:

Transform the look of your E46 Coupe with Turner Motorsport's ABS High Kick Trunk Spoiler, providing a sporty style without the high cost of a carbon fiber spoiler. Engineered in-house using 3D laser scanning and CAD technology, this spoiler mimics the design of the carbon fiber version for similar styling, accentuating OE body lines.

Installation is a breeze with no drilling, cutting, or permanent modifications required. The lightweight, vacuum-formed gloss black ABS polymer, enhanced with UV stabilizer, ensures durability and a strong bond to the body.

Features & Specifications:

• Designed and engineered by Turner Motorsport
• 3D laser scanning and CAD technology for precision fitment
• OE body line accentuation
• Utilizes 3M double-sided tape for a strong bond
• Lightweight, vacuum-formed gloss black ABS polymer with UV stabilizer

Enhance your E46 Coupe's aesthetic appeal with Turner Motorsport's High Kick Trunk Spoiler and experience a distinctive, sporty transformation.

MINI R5X JCW Aerodynamic Kit Black Band Rocker Panel Gloss Black - Left

Enhances the sporty aesthetic of your Mini while adding a touch of sophistication. Crafted with high-quality materials, this rocker panel features a gloss black finish that complements the sleek design of your Mini.

• Enhances the sporty appearance of your Mini
• Adds a touch of sophistication with gloss black finish
• High-quality materials ensure durability and longevity
• Easy installation for a hassle-free upgrade

Enhance both the aesthetics and aerodynamics of your vehicle with the E36 LTW Style Front Lip in Matte Black by Turner Motorsport. This front lip not only transforms your car's appearance but also contributes to downforce, improving overall handling at higher speeds. Crafted from durable UV-stabilized ABS in a two-piece bonded design, this front lip is a cost-effective and lightweight alternative to traditional carbon fiber options. Perfect for daily drivers and track enthusiasts alike, it provides a clean matte finish reminiscent of the original E36 trim.

Concerned about potential damage? Fear not! This front lip is positioned to endure the challenges of road debris, uneven surfaces, and speed bumps. Additionally, it's designed for compatibility with M3 front bumpers and aftermarket replicas, ensuring a precise fit. Worried about the matte finish? No problem! The lip can be prepped and painted to suit your preferences.

Key Features & Specifications:

• LTW-inspired design for a sleek appearance
• Vacuum-formed ABS plastic with UV-resistant construction
• 2-Piece bonded design enhances rigidity
• Precision fitment designed by TMS engineers using 3D laser scanning & CAD
• Uses factory self-tapping screws for installation (Need new hardware? See ES4159683)
• Includes pre-applied 3M double-sided adhesive for additional retention and a tight seal against the front bumper

Turner Motorsport High Kick Trunk Spoiler. This ABS High Kick Trunk Spoiler is designed and engineered in-house by Turner Motorsport, using cutting-edge 3D laser scanning and CAD technology for precision fitment. Crafted from impact and UV-resistant ABS plastic, this spoiler not only enhances the sporty style of your E36 coupe but also fits your budget without compromising on quality.

Installation:

1. Clean the surface area of the trunk.
2. Remove the backing from the attached high-strength double-sided tape.
3. Line it up and press firmly down.
4. For optimal adhesion, it's recommended to perform the installation in a warm environment.

Additional Features & Specifications:

• Mimics the design of the carbon fiber version for similar styling
• Accentuates OE body lines along the outer edge of the spoiler
• Utilizes 3M double-sided tape for a strong bond to the body
• Lightweight, vacuum-formed gloss black ABS polymer enhanced with UV stabilizer

Upgrade your BMW E46 M3's exterior with the Turner Motorsport In-House designed Gloss Black ABS Diffuser. Turner Motorsport's engineers were dissatisfied with existing options, so they crafted a new, affordable solution. This direct bolt-on upgrade, mirroring the style of the Turner Carbon Diffuser, boasts a deep profile, aggressive fin design, and full-width coverage on the rear bumper. Easily installed in minutes using factory mounting locations, this exclusive design promises to turn heads and make a bold statement. Stand out with the Turner ABS Diffuser and enhance your BMW's aesthetic.

• Curvature designed around E46 M3 body lines
• In-house design using 3D laser scanning and CAD technology for precision fitment
• Mounts to existing bumper insert locations with OE hardware
• Lightweight, vacuum-formed ABS polymer in UV-stabilized gloss black
• Mimics lower bumper section and OE diffuser lines for accentuating OEM features

E46 M3 Gloss Black ABS High Kick Rear Spoiler

Elevate the appearance of your E46 Coupe with the Turner Motorsport ABS High Kick Trunk Spoiler. Crafted to enhance style while considering budget constraints, this spoiler transforms your vehicle without the high cost of a carbon fiber equivalent. Made from impact and UV-resistant ABS plastic, this light and durable spoiler offers a sporty look that sets your vehicle apart. Installation is a breeze with no drilling or cutting; simply use the pre-mounted double-sided adhesive strips provided. Clean the trunk surface, apply the tape, align, and press down for a secure fit.

• Designed and engineered by Turner Motorsport in-house using 3D laser scanning and CAD technology
• Mimics the design of the carbon fiber version for similar styling
• Accentuates OE body lines along the outer edge of the spoiler
• Uses 3M double-sided tape for a strong bond to the body
• Lightweight, vacuum-formed gloss black ABS polymer with UV stabilizer

Introducing ADRO's exclusive boutique creation: the one-of-a-kind E92 M3 AT-R1 Swan Neck Wing, a true masterpiece in automotive aesthetics and performance. Crafted with precision and passion, this wing is unlike any other on the market, meticulously handmade with pre-preg carbon fiber to achieve unparalleled quality and style.

The pre-preg carbon fiber construction not only ensures exceptional strength and durability but also lends a unique glossy finish that sets this wing apart from the rest. Each detail is carefully crafted to complement the iconic design of the E92 M3, enhancing its aggressive stance and aerodynamic efficiency.

Designed for enthusiasts who demand the best, this wing is a statement of individuality and sophistication. Elevate your M3 to new heights of exclusivity with our bespoke E92 M3 AT-R1 Swan Neck Wing, where luxury meets performance in every curve and contour.

Includes:

• Pre-Preg Carbon Fiber Wing Deck
• Aluminum Uprights (1 Pair)
• Pre-Preg Carbon Fiber Flat End Plates (1 Pair)
• Carbon Fiber Reinforcement Plates (1 Pair)
• 3M Tape
• Hardware

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2016 BMW F10 all excluding M5