Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
09-17-2026
This product was last offered at the strikethrough price on
09-17-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
If you already have the ECS open cone filter for you N54 car then this is the perfect add-on upgrade for your system to really clean up the engine bay and keep your cone filters much cleaner. When you upgrade to the enlcosed filter kit your filters will be surrounded more more consistent cold air and by protecting the filter from engine bay dirt you are reducing the risk of air flow problems from build up.
The ECS Kohlefaser Luft-Technik (Carbon Fiber Air Technology) intake for the 135/335/535 is a beautifully crafted dual-cone intake with a glossy carbon fiber enclosure. Developed in-house using ECS's chassis dyno and state of the art laser scanning and 3D CAD technology, the N54 carbon airbox is a direct replacement for the stock system. Laser scanning allows ECS to produce a finished product that is a perfect fit to the engine bay. All tubing is also made from carbon fiber with each piece designed for optimal flow. The carbon fiber sandwiches a special heat-blocking fiberglass core, insulating the air box from engine bay heat. All of this combines to produce more power and torque over a wider RPM range - up to 13ft-lbs and 18hp when combined with a Cobb software tune, FMIC, and exhaust. And it looks amazing every time you open the hood.
Features:
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Enhance your BMW's performance and sound with the Turner Motorsport N54 Valved Catback Exhaust. This exhaust system delivers a dual-purpose experience, offering a subdued note with the muffler valves closed, maintaining a near-factory sound. Open the valves with the included controller, and unleash a menacing growl, transforming your driving experience. Crafted with mandrel-bent dual 2.5" 304SS pipes and a high-flow valved stainless steel muffler, this system is a bolt-on replacement for the OE version, ensuring easy fitment with Accuseal slip-fit joints. Elevate your 335i's exhaust with the Turner Motorsport E9X 335i full exhaust system, available as Axle Back, Cat-back, or Turbo back.
This product was last offered at the strikethrough price on
09-24-2026
This product was last offered at the strikethrough price on
09-24-2026
Transform the character of your E39 with the Luft-Technik Intake System from ECS Tuning.
ECS Tuning developed this intake with a focus on the E39's unique design challenges, particularly its one-of-a-kind factory airbox mount. By engineering a system specifically for this chassis, ECS ensures a precise, bolt-on fit that feels OEM while unlocking airflow the stock system leaves on the table.
At the core of the Luft-Technik system is a high-flow conical filter housed within a powder-coated aluminum heat shield, designed to seal against the hood and isolate the filter from engine bay heat. The result is a colder, denser air charge for improved combustion efficiency. A reinforced silicone intake elbow and precision-machined MAF housing maintain factory functionality while reducing turbulence, delivering smoother airflow straight into the engine.
The benefits are immediate: faster throttle response, a noticeable bump in induction volume, and a cleaner, more performance-oriented look under the hood. Pairing factory-style mounting points with premium materials like stainless-steel hardware, ECS created a system that not only performs but is built to withstand years of spirited driving.
For enthusiasts who want their inline-six to breathe freely and sound the part, the Luft-Technik Intake by ECS Tuning combines OE-level fitment with true performance engineering.
Key Features:
21% increase in flow over the stock intake
Can be used to eliminate ASC
Seals to the hood for the largest and coldest air space.
Unrestricted airflow for maximum induction noise.
Heat shield designed specifically for the E39, utilizing factory mounting locations to create a colder air pocket where the OEM inlet duct feeds.
5052 powder-coated aluminum heat shield for stiffness, corrosion resistance, and durability in demanding environments.
Black silicone intake elbow and coupler are compliant, high-temperature resistant, and designed to grip clamps securely through repeated heat cycles.
Retains the stock 3.0" MAF with no adapters required.
Designed to preserve the stock ICV hose.
Stainless-steel hardware included for long-term durability.
Fitment & Compatibility:
Tailored to the OBD2 M52B28 without ASC found in the BMW E39 528i.
Mounts directly to the factory frame rail with no modification required.
Designed to maximize available air space while retaining the OEM cold air inlet.
Kit Contents:
Heat Shield
Silicone Throttle Body Boot
MAF Mount
Silicone MAF Coupler
Inlet/Air Filter Adapter
High-Flow ECS Conical Air Filter
E39-Specific Heat Shield Mount
Complete Installation Hardware
Product Development: The Luft-Technik Intake System was designed, engineered, tested, and quality inspected by ECS Tuning's Research and Development team. Their process incorporates industry-leading tools and methods, including FARO laser scanning for reverse engineering and quality assurance, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and rigorous long-term product testing. Performance data is validated using both a Mustang AWD 500 SE in-ground dyno and a Superflow SF-750 Flowbench to ensure precision and reliability.
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Upgrade your BMW with the Turner Motorsport Titanium Exhaust, offering increased flow, weight reduction, and enhanced sound. Shed over 55% of the OEM exhaust weight while enjoying a more aggressive tone for your N55-powered F30/F32.
Enhance your BMW's engine bay aesthetics and performance with the Turner Motorsport N55 Carbon Intake. Witness significant power gains and reduced pressure drop post-filter for less stress on your turbo.
Lightweight performance exhaust for your E36, featuring a 3.0" valved muffler and controller to change the sound with the click of a button with a Carbon Fiber Intake!
Performance Valved Cat-Back Exhaust - E36 M3:
Our new E36 Axle Back Exhaust is a versatile exhaust offering a number of options for E36 owners. With the factory exhaust you can upgrade to having valve control for different tone and volume options on the fly. For the fully upgraded or turbo owners this exhaust features a 2.0" to 3.0" exhaust pipe conversion and full 3.0" valved muffler that can be used with a custom full 3.0" exhaust.
When it comes to shopping for exhausts you want to find one that suits your driving style and sound preference. While one part of you wants to have a loud and aggressive sounding exhaust, there is another part of you that knows you don't want to wake up the neighborhood or annoy your significant other. Finally the answer to your dilemma, thanks to our engineers at Turner you no longer need to choose between rowdy and tame. With your new light-weight performance exhaust you have the option to go from tame and tasteful to loud and rowdy.
Our Valved exhaust was designed specifically for your E36 and there are no other options on the market like this. Control the tone and volume of your exhaust with the click of a button. With the valves closed you have a nice low tone and hearty exhaust note. When the valves are open you get complete unrestricted access to sound and power for when your at the track or just in the mood to let it rip.
Our Turner catback features dual 2.0" to 3.0" adapter that connects directly to your factory mid-pipes. From the adapter is full 3.0" exhaust piping with a smooth flow path to lower back pressure which leads to increased performance and a smoother exhaust tone. The 3.0" rear exhaust section flows into a full 3" valved muffler. The muffler features integrated 3" exhaust tips for an aggressive look that fills out your rear diffuser to get the perfect appearance.
New in 2023 you have two new options for E36 exhausts, our Turner valved and non valved axle back exhaust setups. With our Non Valved Axle-Back you achieve a happy medium of volume and tone but without the ability to adjust the volume. Our Valved Axle-Back is another variation and a true weapon, not only does it have the option to fit to your factory exhaust system but it is also the clear option for those looking to make a full 3.0" exhaust. After putting together the front 3.0" exhaust section you can assemble it with our Turner Valved Axle-Back for not only a full custom 3.0" exhaust but also have the luxury of volume control all with perfectly paired integrated 90's styled exhaust tips that fill out the rear valance with perfect proportions.
- CLICK HERE - for a sample of just how good your S50 or S52 can sound!
Non-M Fitment: Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **
Features and Benefits:
Adjustable exhaust volume Improved flow Dual 2.0" to 3.0" exhaust adapter 3.0" Pipe diameter (great to utilize with 3.0" turbo back while having volume control!) Lightweight (28lbs!) Retains factory emissions Utilizes factory exhaust hangers Compatible with M3 and replica M3 rear bumpers Compatible with NON-M bumpers with hanger modification Part Design:
Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout 2.5"-3.0" Stainless Steel Mandrel Bent Tubing Sheet metal mounting brackets to utilize stock mounting locations T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment. Designed for smoother flow path and less backpressure Kit Contents:
Dual 2.0" to 3.0" adapter 3.0" mid pipe section Full 3.0" turbo-style valved muffler with integrated tips Valve controller with installation kit and 2 key fob controllers Clamps and hardware for installation Installation:
- Click HERE for Installation Instructions -
Product Development:
Our Turner E36 Axle Back was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
Performance Carbon Intake Systems - E36 OBD1 6 Cyl Models:
In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.
Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.
Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.
Features and benefits:
Increased air flow Added air induction volume Upgraded silicone throttle body MAF inlets Enhanced engine bay aesthetic Retains factory cold air inlet Factory cruise control mounting Individualized designs for all 6 cylinder variations Design:
Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air Utilizes stock mounting locations on frame rail and wheel arch Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference 3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer Retains Stock MAF Sensor High-gloss carbon intake cover Air box mounting for IAT sensor Kit Contents:
Aluminum airbox - powder coat black Carbon fiber intake cover Reinforced silicone throttle body inlet Reinforced silicone MAF coupler Aluminum intake inlet - powder coat black Charcoal canister spacer (obd1 specific) Turner high flow oiled cone filter Installation hardware Product Devlopment:
Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.
Installation:
- Click HERE for Installation Instructions -
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-29-2026
7" Tall Air Filter:
This intake system utilizes an oil-free, 7" tall conical 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.
High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.
Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.
Hassle-Free Installation:
All clamps, coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.
Note 1:
Does NOT fit Convertible models.
Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
This part fits the following BMWs:
F3X B58
This product was last offered at the strikethrough price on
10-01-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
MINI R56 M7 Speed MAXX-FLO Air Intake System is the ultimate performance upgrade for your Generation 2 MINI, specifically designed to fit all R55 through R59 models with N14 & N18 Turbocharged engines, as well as the R60 Countryman and R61 Paceman. This system replaces the restrictive stock air box with a precision-fabricated aluminum frame that connects securely to the factory mounting points, making installation straightforward and hassle-free. The M7 Speed design addresses common issues found in other aftermarket systems, offering a robust and efficient solution for enhanced engine performance and sound.
MINI R52 R53 Cold Air Intake System Automatic - Black is engineered to enhance your MINI's performance with a sleek and durable design. The ALTA Cold Air Box is meticulously crafted from laser-cut aluminum sheet metal and CNC bent for precision. Finished in a rich black texture powder coating, it offers long-term protection and a stylish OEM look. This airbox seals tightly to the underside of the hood, preventing under-hood heat from contaminating the intake airstream.
With the ALTA intake system, your vehicle will produce a deep, throaty tone under throttle, making the presence of your supercharger unmistakable. The high-flow foam filter improves airflow and increases the surface area for clean air intake, featuring multi-layer filtration for superior dirt capture without reducing horsepower as it accumulates dirt.
The ALTA Cold Air Intake System consistently delivers a 10-12 WHP gain and is available in black or red texture powder coating.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
05-23-2026
This product was last offered at the strikethrough price on
09-22-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
MINI R60 R61 Magnum FORCE Pro DRY S Stage-2 Intake System delivers impressive performance gains and efficiency. Designed to enhance engine power, this intake system offers the following benefits:
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Introducing the M7 Speed MAXX-FLO(TM) Fresh Air System, the ultimate upgrade for Generation 2 MINIs! Upgrade your MINI's performance with our latest offering, designed to fit all R55 through R59 MINIs with N14 & N18 Turbocharged engines, as well as the R60 Countryman and R61 Paceman. Our system replaces the restrictive stock air box with a precision-fabricated aluminum frame, seamlessly connecting to factory mounting points for easy installation. Say goodbye to the problems found in other aftermarket systems and hello to improved airflow, engine performance, and great sound.
Tech Notes:
Emissions Notes:
Upgrade your MINI today with the M7 Speed MAXX-FLO (TM) Fresh Air System and experience enhanced performance and style!
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
The 69 Series Typhoon™ Air Intake System is engineered for peak performance and style, offering a free-flowing mandrel-bent aluminum tube induction system suitable for various sport compact performance vehicles. Available in three designs - cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes - it offers versatility to fit different preferences. With options like polished aluminum, powder coated red, and powder coated silver finishes, it adds a touch of customization to your Mini.
A simple 30-minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high-quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red). This performance module increase turbo boost. It improves vehicle performance and throttle response. In testing, this module resulted in significant +33 horsepower and up to +50 lbs. x ft. of torque verified by our in-house dyno.
Direct Plug & Play Power:
This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response.
In-Cabin On-the-Fly Power Adjustments:
SCORCHER GT modules feature In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin.
High-Quality Case & Wire Harness:
aFe SCORCHER GT modules use high-quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors plug directly into the stock wiring harness connectors and sensors.
High Precision and Quality:
SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products.
aFe POWER does not recommend to use with any other tuners or modules.
This SCORCHER GT is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
This part fits the following BMWs:
2016-2018 F87 M2 N55
Enhance your Mini's performance with this durable air intake system, featuring a washable and reusable conical air filter encased in a robust 16-gauge, powder-coated heat shield. The filter, made of 100% polyurethane, ensures longevity and allows for multiple cleaning cycles. With minimal assembly required for the heat shield and no cutting or drilling on factory parts, installation is fast and easy. The 3" mandrel-bent wrinkle-black powder-coated aluminum intake tube improves volumetric efficiency, resulting in increased horsepower and torque.
This product was last offered at the strikethrough price on
05-22-2026
This product was last offered at the strikethrough price on
09-22-2026
Upgrade your MINI Cooper with the NM Engineering intake system for enhanced performance. Designed specifically for the F56 model, this bolt-on 'Open-Air-Box' system provides unrestricted airflow for improved throttle response, increased power, and more pronounced engine and turbo tunes. With easy installation in just 30 minutes, you can enjoy the benefits of this intake system right away.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Experience unrivaled performance with M7's latest innovation—the MAXX-FLO(TM) low restriction intake system. Engineered specifically for all 2007-2015 R55-R61 Turbocharged MINI Coopers, this system eliminates common issues found in other aftermarket fresh air systems. With a complete installation mount kit, silicone connector elbow, and all necessary hardware included, installation is a breeze. Plus, it attaches directly to existing factory mounts, ensuring a secure fit.
Upgrade your MINI's performance today with the M7 Speed MAXX-FLO(TM) High Performance Intake System!
Enhance your F60 MINI with the Eventuri intake system, a complete and sealed unit designed to prevent the turbo from drawing hot air from the engine bay. The system's larger internal volume and air intake from the stock location above the radiator ensure lower intake temperatures compared to the stock airbox, preventing heat soak, especially in higher-powered MINIs. The patented filter housing and CNC machined MAF tube guarantee the smoothest airflow possible to the turbo.
Note: