Showing 4806 results for ""

OEM FAG Front Wheel Hub Assembly with Bearing fits BMW E36 (including M3), E46 (not Xi, not M), Z3 incl MZ3. It is interchangable with part #31221468926 or 31221139345.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318ic 318is 318ti 323is 323ic 325i 325ic 325is 328i 328ic 328is M3 M3 Convertible
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
3/1991-1995 E34 BMW 525i 530i 535i 540i
11/1991-1994 E32 BMW 735i 735il 740o 740il 750il
3/1992-1999 E31 BMW 840ci 850ci 850csi
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Our Turner Motorsport rear shifter bushing is a precision-engineered solution designed to eliminate excessive deflection in the factory BMW G8X shift carrier assembly. The OEM rubber bushing introduces unwanted compliance that translates to a vague shifter feel, imprecision under load, and potential gear misalignment during aggressive driving. This polyurethane and billet aluminum replacement addresses that with a focused approach to both material selection and mechanical function.

Our engineer replaced the soft rubber isolator with a 70A durometer polyurethane bushing housed in a CNC-machined 6061-T6 aluminum body. The result is a significant reduction in bushing deflection while retaining the necessary articulation for BMW’s dual-bushing shift carrier design. Strategically placed relief cuts in the poly insert allow controlled movement without compromising rigidity where it matters most, translating to a more direct, confident shift feel without introducing harsh NVH into the cabin.

By maintaining stock geometry and compatibility with OEM components, this bushing installs as a direct replacement for BMW part #25118623459, with no modification required. Ideal for spirited street driving, track use, or anyone seeking a more mechanical and connected shift experience.

Technical Specs:

70A polyurethane construction for optimal stiffness-to-compliance ratio
CNC-machined 6061-T6 billet aluminum housing
Type II anodized for corrosion resistance
Retains dual-axis articulation of factory shift arm
Direct fitment for G80 M3 / G82 M4 / G87 M2 (with manual transmission)
Performance Gains:

Drastically reduces lateral and fore-aft play in the shifter
Improves shift precision, especially under load or high-RPM shifts
Minimizes missed shifts and sloppy gear engagement
Maintains daily drivability with near-OEM NVH levels
Whether you’re chasing lap times or just want your daily to feel more dialed in, this rear shifter bushing is a must-have for restoring and upgrading the mechanical precision BMW’s manual platform deserves.

If you’re looking to take things a step further, adding our Dual Shear Selector Rod and Short Shifter is a great way to build on this upgrade and unlock even more shift feel and precision—whenever you’re ready

One pin kit that helps to address issues with shifting into 1st through 4th gear. We recommend purchasing 3 kits to ensure all pins are new and provide the best results.

Genuine BMW Set Of Detent Pins
This item fits the following BMW Chassis:
E36, E34, E39, E46 (up to 03/2003),  E53 X5(up to 10/2003)

Turner Motorsport Lightweight N54 Flywheel & Upgraded Clutch Kit

Unlock the full potential of your N54-powered BMW with our performance-driven clutch and flywheel kit. Designed to enhance daily drivability while delivering increased power handling and improved throttle response, this kit is the ultimate upgrade for enthusiasts seeking more from their vehicle.

Why Choose This Kit?
This setup features the Turner Lightweight N54 Flywheel, precision-engineered for quicker acceleration, faster rev-matching, and a more responsive driving experience. Paired with an upgraded OE clutch from the high-performance 335is and F10 550i(V8 Bi-Turbo), this combo is capable of handling over 500 ft-lbs of torque while maintaining smooth, factory-like engagement and durability.

The factory dual-mass flywheel may prioritize smoothness and efficiency, but it comes at the cost of responsiveness and is prone to failure in high-performance applications. The Turner Lightweight Flywheel solves these issues with a single-mass design that strikes the perfect balance between comfort, performance, and reliability making it ideal for both daily driving and spirited track use.

Kit Contents:

Turner Lightweight N54 Single-Mass Flywheel (18.6 lbs, 10 lbs lighter than stock)
Upgraded OE Clutch – Supports 500 ft-lbs+
OE Clutch Fork - P# 21517564027
OE Throwout Bearing
Clutch Alignment Tool - P# 056212LA01A
Brass Clutch Fork Pivot Pin - P# 21511223328
OE Flywheel Bolts - P# 11227520706
OE Pressure Plate Screws - P# 21207548052
Pivot Pin Retaining Spring - P# 21517570284
Transmission Mating Dowels - P# 11117524470
Flywheel Features:

Precision-machined 4140 HT heat-treated chromoly steel for durability
Black oxide coating to resist corrosion
8620 steel pilot bearing pin for maximum wear resistance
Precision balanced to exceed OEM standards
Optimized step height for longer clutch life and consistent performance
Clutch:

Upgrade for 135i/335i/535i models from the 335is! Featuring a heavy-duty clutch with more holding power and a stock-like pedal feel. Excellent solution for If your clutch is slipping, or the engagement isn't what it used to be, it's time for a replacement. Slipping clutches won't allow your BMW to accelerate properly and can pose problems under a load such as going up large inclines. Also, a worn clutch can cause less precise and engaging shifts. By replacing your clutch you will restore performance and driving pleasure.

This clutch is an excellent upgrade for non 335is/550i/650i models. It features a more heavy-duty clutch disc and more holding power with stock-like pedal effort.

Transform your driving experience with this Turner Motorsport clutch and flywheel kit - engineered for power, performance, and everyday reliability.

When wheel bearing begin to fail you normally will here a squeaking or grinding noise or sometimes feel a slight amount of vibration in the steering wheel. Be sure to replace these asap to prevent possible damage to the hub or steering issues.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

• 20-25% shorter shifts
• Counterbalanced for great shift feel
• Stainless steel & aluminum construction
• Rubber isolated for reduced NVH
• Maintains stock shift feel with uprated stock-type bushings

The Dinan short shifter provides shorter shift throws with a crisper and more precise feel than a stock shifter. Instead of retrofitting a stock BMW lever, with all of its deficiencies, Dinan has engineered this billet aluminum shifting system. Special features engineered into this unit include a two piece fully isolated stick assembly, exclusive integrated and dampened pivot cup with self lubricating pivot ball, counter balanced to reduce effort and exclusive polymer "Iglide" T-500 lower pivot bushings that are impervious to contamination. Featuring an adjustable pivot, which allows this shifter to fit both standard and M Series applications. All of this combined with a simple straightforward installation provides a professional level shifter. Provides a 25% throw reduction in E36s, E39s and E46s and a 20% throw reduction in M3 and M5 applications.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty.