Find Parts That Fit Your Vehicle

Air Intake Filters

We stock several replacement and performance drop-in air filters for your BMW. Replacing your intake filter (or filters, depending on vehicle) can improve your BMW's performance immediately.
Sort By:

Burger Motorsports - Corporate Logo
T#:3586313
Part#: REPLACEMENT-N55F
In Stock
$ 70.00 USD
Free Shipping
$ 70.00 USD
Free Shipping

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

  • Designed for N55 engines
  • Optimizes airflow for increased power
  • Improves throttle response and fuel efficiency
  • Protects engine from contaminants
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38890884
Part#: BMS-N54-DCIR-R
Ships on Nov 17, 2026
$ 79.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:556765
Part#: BMS-N54-DCI-R
EO#: D-744-2
In Stock
$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less

Burger Motorsports - Corporate Logo
T#:556768
Part#: BMS-N54-DCI-B
EO#: D-744-2
In Stock
$ 109.00 USD
Free Shipping
$ 109.00 USD
Free Shipping

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less

Burger Motorsports - Corporate Logo
T#:38890886
Part#: BMS-N54-DCIR-B
Ships in 1 Business Day
$ 89.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38890883
Part#: BMSREPAFNFFR
In Stock
$ 70.00 USD
Free Shipping on orders $49 and up
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants
Show More Show Less

BMC - Corporate Logo
T#:2393417
Part#: FB01118
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
BMC - Corporate Logo
T#:398690
Part#: FB577/08
In Stock at Vendor
$ 125.99 USD
Free Shipping
$ 125.99 USD
Free Shipping
>Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398738
Part#: FB928/20
In Stock at Vendor
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:2393415
Part#: FB01103
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping

BMW N63 4.4L BMC Performance Air Filter - Set is designed to enhance engine performance by replacing the OEM air filter with a high-quality upgrade. This panel/cylindrical air filter fits directly into the vehicle's original airbox, offering improved air flow and filtration efficiency. Made from advanced materials, it provides superior filtration, capturing impurities as small as 7 microns, compared to the 10 microns of the standard OEM filter.

  • Enhanced Air Flow: Improves engine breathing and performance by allowing more air to flow into the engine.
  • Superior Filtration: Captures particles as small as 7 microns, offering better protection compared to the OEM filter.
  • Increased Efficiency: Optimizes the air-to-fuel ratio for improved engine efficiency and power output.
  • Direct Replacement: Fits seamlessly into the original airbox without the need for modifications.
  • Long-Term Durability: Made from high-performance materials for extended lifespan and reliable performance.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:28968878
Part#: 1123BMS
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

Show More Show Less
BMC - Corporate Logo
T#:641644
Part#: FB01054
In Stock at Vendor
$ 102.99 USD
Free Shipping
$ 102.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less


BMC - Corporate Logo
T#:398705
Part#: FB647/20
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:46959280
Part#: S638DIF
Ships on Nov 10, 2026
$ 149.00 USD
Free Shipping on orders $49 and up
Burger Motorsports' performance S63/S68 BMW drop-in air filters exceed OE quality and feature layered, oiled cotton media engineered to have the most improved airflow possible and still capture contaminants while increasing horsepower. Each Burger Motorsports performance air filter is washable, reusable, and will last the entire life of your vehicle. Installs easily into your factory air boxes. Replaces Genuine BMW part numbers 13718091495 & 13718091496
Show More Show Less
BMC - Corporate Logo
T#:397411
Part#: FB132/01
Back Ordered
$ 84.99 USD
Free Shipping
$ 84.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398736
Part#: FB866/04
Back Ordered
$ 218.99 USD
Free Shipping
$ 218.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:637734
Part#: FB01034
In Stock at Vendor
$ 201.99 USD
Free Shipping
$ 201.99 USD
Free Shipping
BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:556769
Part#: BMS-N54-DCI-W
Ships in 5 Business Days
$ 109.00 USD
$ 109.00 USD

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less

BMC - Corporate Logo
T#:2393420
Part#: FB01090
In Stock at Vendor
$ 328.99 USD
Free Shipping
$ 328.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
BMC - Corporate Logo
T#:398727
Part#: FB702/20
Back Ordered
$ 88.00 USD
Free Shipping
$ 88.00 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398733
Part#: FB740/20
In Stock at Vendor
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38890885
Part#: BMS-N54-DCIR-W
Ships on Nov 10, 2026
$ 84.00 USD
Free Shipping on orders $49 and up
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
BMC - Corporate Logo
T#:398706
Part#: FB651/20
Back Ordered
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:567651
Part#: FB536/08
In Stock at Vendor
$ 125.99 USD
Free Shipping
$ 125.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit. ​For vehicles with production date from 09/2009
Show More Show Less


BMC - Corporate Logo
T#:398689
Part#: FB494/20
In Stock at Vendor
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:2393408
Part#: FB813/01
In Stock at Vendor
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
BMC - Corporate Logo
T#:398704
Part#: FB630/20
In Stock at Vendor
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38621427
Part#: BMS-DAF-S58
Ships on Nov 10, 2026
$ 139.00 USD
Free Shipping on orders $49 and up
Burger Motorsports Performance S58 G8X BMW Drop-In Air Filters exceed OE standards, featuring oiled cotton media for enhanced airflow, effective contaminant filtration, and increased horsepower. These high-performance filters are washable and reusable, designed to last the lifetime of your vehicle. They easily install into your factory airboxes. Replaces OEM BMW part numbers: 🔹 Left: 13-71-8-095-807 🔹 Right: 13-71-8-095-805
Show More Show Less

Burger Motorsports Drop-In Air Filter - N54 135/335/535
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:556764
Part#: BMS-N54-DIAF
Ships on Nov 10, 2026
$ 65.00 USD
$ 65.00 USD

Looking to improve your intake without having to tear apart your engine bay? Then this drop-in performance air filter may be the perfect option for you! Allowing for much higher and easier air flow than the stock BMW filter, this filter allows your engine to breathe much easier at any RPM, freeing up horsepower and torque that normally would have been locked away.

Thanks to the direct replacement style of this filter, no modifications need to be made to the intake components. Just pull out your old filter, place this filter in the stock location, and enjoy!

Show More Show Less
BMC - Corporate Logo
T#:398714
Part#: FB654/20
In Stock at Vendor
$ 157.99 USD
Free Shipping
$ 157.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:589042
Part#: FB01073
In Stock at Vendor
$ 207.99 USD
Free Shipping
$ 207.99 USD
Free Shipping
BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:398735
Part#: FB821/04
In Stock at Vendor
$ 130.99 USD
Free Shipping
$ 130.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398688
Part#: FB447/01
In Stock at Vendor
$ 196.99 USD
Free Shipping
$ 196.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC Drop-In Performance Air Filter - Single Filter - BMW G01 X3 M40i ...
Special Order Item - May take up to 4 weeks to be delivered to our facility
BMC - Corporate Logo
T#:10746839
Part#: FB01041
In Stock at Vendor
$ 104.99 USD
Free Shipping on orders $49 and up
BMC air filters are produced using a "Full Molding" system that enables the characteristic red filter to be realized from a single mold with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low-viscosity oil covered with an epoxy-coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit. Replaces BMW P/N: 13718581691
Show More Show Less
BMC - Corporate Logo
T#:397417
Part#: FB518/08
Back Ordered
$ 83.99 USD
Free Shipping
$ 83.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:584728
Part#: FB929/20
Back Ordered
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
BMC air filters are produced using a "Full Molding" system that enables the characteristic red filter to be realized from a single mold with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes. BMC filters are made of a multi-layered cotton gauze soaked with low-viscosity oil covered with an epoxy-coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity. All BMC air filters are pre-oiled, and they can be washed and regenerated by using the appropriate BMC regeneration kit. Replaces BMW P/Ns: 13718577170, 13718577171,13718691835
Show More Show Less


BMC - Corporate Logo
T#:398680
Part#: FB117/01
Back Ordered
$ 71.99 USD
Free Shipping
$ 71.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:2408501
Part#: FB763/20
Back Ordered
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
BMC - Corporate Logo
T#:586059
Part#: FB930/01
In Stock at Vendor
$ 196.99 USD
Free Shipping
$ 196.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398700
Part#: FB584/20
Back Ordered
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

BMC - Corporate Logo
T#:398703
Part#: FB608/20
Back Ordered
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
BMC - Corporate Logo
T#:398732
Part#: FB730/20
In Stock at Vendor
$ 97.99 USD
Free Shipping
$ 97.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

Replacement Intake Coupler - Priced Each
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:583384
Part#: INTAKECOUPLER
Ships in 1 Business Day
$ 15.00 USD
Free Shipping on orders $49 and up
Burger Motorsports - Corporate Logo
T#:35019968
Part#: BMSB46B48BINTAKE
In Stock
$ 229.99

This product was last offered at the strikethrough price on
06-12-2026

$ 209.99 USD
Free Shipping on orders $49 and up
$ 209.99 USD
Free Shipping on orders $49 and up
Open-element billet intake increases forced-induction volume on B48 U11/U10 chassis.

Burger Motorsports - Corporate Logo
T#:46993569
Part#: G2B48B58DIAF
Ships on Nov 10, 2026
$ 65.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports performance B48/B58 G Chassis BMW drop-in air filter is OE quality and features layered, oiled cotton media engineered to improve airflow, capture contaminants, and increase horsepower. Each Burger Motorsports performance air filter is washable, reusable, and will last the entire life of your vehicle. Installs easily into your factory airbox. Replaces air filter OEM BMW part numbers 13718635102 or 13718580428
Show More Show Less

Burger Motorsports - Corporate Logo
T#:54852048
Part#: BMSB46B48BRI
Ships on Nov 10, 2026
New Item
$ 229.99 USD
$ 229.99 USD
Open-element billet intake increases forced-induction volume on B48 U11/U10 chassis.
Burger Motorsports - Corporate Logo
T#:41255920
Part#: S58FMSILINT-BLU
Ships on Nov 10, 2026
$ 599.00 USD
Free Shipping on orders $49 and up
Elevate the capabilities of your G8x or F9x S58-powered BMW with an intake system engineered to true motorsport standards. The BMS Front-Mount Performance Intake completely eliminates the restrictive OEM induction setup, replacing it with a continuous 3.5" high-flow tract designed for maximum volumetric efficiency.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38621411
Part#: BMW-DIPAF-B4858
Ships on Nov 10, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports Performance B48/B58 G-Chassis BMW Drop-In Air Filter exceeds OE quality, utilizing layered, oiled cotton media for optimal airflow, effective contaminant filtration, and increased horsepower. This high-performance filter is washable, reusable, and designed to last the lifetime of your vehicle. With a simple drop-in installation, it seamlessly fits into your factory airbox. Replaces OEM BMW air filter part number: 13718577170.
Show More Show Less


BMC - Corporate Logo
T#:2393419
Part#: FB01091
In Stock at Vendor
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping
BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
Burger Motorsports - Corporate Logo
T#:54852049
Part#: BMSB46B48BDI
Ships on Nov 10, 2026
New Item
$ 229.99 USD
$ 229.99 USD
Billet intake with low-maintenance dry filter eliminates B48 induction restriction.