Showing 363 results for ""

Streamline the setup process for your Limited Slip Differential (LSD) with this mandatory back-lash setting tool. This custom-designed tool is instrumental in reducing installation time by a whopping 50%! It's important to note that this tool is not part of BMW's offerings. Should there be any defects or warranty-related matters, it's advisable to directly reach out to Team M Factory for prompt resolution.

Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
 

Gain a significant competitive edge with the MFactory Helical Limited Slip Differential, available at Turner Motorsport. This Helical LSD delivers a smooth and consistent distribution of power to your BMW's wheels, optimizing traction on the street, strip, or track. It's an essential addition for any BMW enthusiast.

Curious about the LSD's role? Without it, your car effectively becomes a one-wheel-drive vehicle, supplying torque to the wheel with less grip. The Helical LSD changes the game by allowing both wheels to receive power while limiting the speed difference between them, in contrast to open differentials commonly found in most vehicles.

Key Features:

• 30-Day Feel the Torque™ Money Back Guarantee: An industry-first assurance that lets you experience the difference. Plus, it's backed by a Limited-Lifetime Warranty for your peace of mind.
• Forged and Cryo-Tempered: Engineered for extreme durability and longevity, ensuring it can withstand the rigors of competition-level drag racing.
• Advanced Shot Peening Technology: Enhances surface hardness, making it well-equipped to handle the shocks of competition-level drag racing.
• Maintenance-Free Gears: Bid farewell to special fluids or rebuilds associated with typical plate LSDs. It's designed for hassle-free ownership.
• Lock-Free Operation: Ensures there's no adverse impact on steering response.

Break-In Procedure: For optimal performance, it's recommended to change the fluid after the first 3-400 miles of use.

Please note that any defects or warranty claims should be directed to Team MFactory.

BMW G8X Rear Diff Front Mounting Bushing (Street) is a high-performance upgrade designed to enhance the stability and control of the BMW G8X's rear differential. This bushing features a robust construction combining CNC-machined aluminum and high-quality polyurethane to provide superior drivetrain support and minimize deflection.

• Improved Drivetrain Stability: Reduces drivetrain deflection for better handling and control.
• Enhanced Launch Performance: Minimizes wheel-hop during aggressive starts and hard launches.
• Durable Construction: Made from black anodized 2011-T6 aluminum and high-strength polyurethane.
• Choice of Hardness: Available in signature purple 80A durometer or black 95A durometer polyurethane to suit different driving needs.
• Direct Replacement: Designed as a full bushing replacement for easy installation and improved performance.

This is the rear rubber-isolated differential mount. The diff mounts take the bulk of the twisting and binding as power is transmitted through the differential. We use a Meyle HD rubber bushing for the rear mount as it's stronger than the factory part. (33176751808). We also recommend replacing the front differential mount 33171093175MY at the same time.

Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E83 BMW X3 2.5i X3 3.0i
2003-2006 E85 BMW Z4 2.5i Z4 3.0i

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Harness unused potential. Drive with confidence. Engineered to maximize strength and cooling performance while utilizing the unused secondary factory differential mount for enhanced support and driveline stability.

Our Turner Motorsport Dual-Mount Differential Cover is purpose-built to reinforce one of the most critical components in the G8X M3/M4 drivetrain. From the factory, BMW includes a secondary bushing location in the rear subframe but leaves it unused. Our solution fully capitalizes on this overlooked feature, giving the differential a second point of support for improved rigidity, reduced movement, and enhanced driveline response under load.

This cover is more than just a mounting upgrade. It’s precision-machined from 6061-T6 billet aluminum for exceptional strength without unnecessary weight. An aggressive fin profile improves thermal efficiency, helping to lower fluid temperatures in high-stress environments. Inside, the cover features an embossed channel that mirrors the ring gear path, ensuring fluid stays in contact where it's needed most, improving cooling and lubrication in all conditions.

Whether you're carving corners on the street or pushing the limits on track, this differential cover is designed to keep your rear end cool, stable, and responsive.

Key Features and Benefits:

The dual-mount design utilizes the factory-provided secondary bushing location, adding critical support to reduce differential deflection, extend bushing life, and minimize wheel hop.
CNC-machined from 6061-T6 billet aluminum, offering high strength and a precise fit.
Built-in cooling fins increase surface area for improved heat dissipation and lower differential fluid temperatures.
Internally contoured to follow the ring gear profile, promoting consistent fluid coverage and effective lubrication.
Maintains a 1.1-liter fluid capacity, closely matching OEM specifications for ease of servicing.
Integrated -6 AN ports support the addition of an external differential cooler for increased fluid volume and extended service intervals.
Compatible with the factory differential fluid temperature sensor and includes provisions for 1/4” NPT aftermarket sensors.
Product Development:

Like all Turner Motorsport performance solutions, this differential cover was developed in-house by our dedicated Research and Development team. Designed, engineered, tested, and quality-inspected using advanced tools including FARO laser scanning for reverse engineering, SolidWorks 3D CAD modeling, in-house rapid prototyping, and extensive long-term testing, you can trust that this part meets the highest standards of fit, function, and durability.

From spirited street driving to full-throttle track days, the Turner Motorsport Dual-Mount Differential Cover ensures your G8X delivers the response, strength, and cooling capacity it needs when it matters most.