This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.
Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. The Burger Tuning oil catch can is the best we have seen so far. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.
The BMS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The BMS OCC also has a factory-like appearance. Since BMS designed their catch can from scratch they can guarantee it fits and performs correctly for the N54/N55 engine, unlike other catch cans on the market that are poorly retrofitted from other applications and under-sized for the N54 engine.
Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles
BMS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ Double-baffled design allows excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Stealth mounting on cooler side of engine bay (promotes condensation of oil to vapor)
+ Anodized black lightweight aluminum
+ N54 version mounts out of sight under the cowl
+ Made in USA with a lifetime guarantee
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
BMW F8X S55 Flex Fuel Kit | Fuel-It! from Turner Motorsport is essential for those running E85 or ethanol blends in their BMW. This comprehensive kit offers a plug-and-play solution for installing a Bluetooth ethanol sensor in your S55-powered vehicle.
Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.
Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. The Burger Tuning oil catch can is the best we have seen so far. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.
The BMS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The BMS OCC also has a factory-like appearance. Since BMS designed their catch can from scratch they can guarantee it fits and performs correctly for the N54/N55 engine, unlike other catch cans on the market that are poorly retrofitted from other applications and under-sized for the N54 engine.
Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles
BMS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ Double-baffled design allows excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Stealth mounting on cooler side of engine bay (promotes condensation of oil to vapor)
+ Anodized black lightweight aluminum
+ N54 version mounts out of sight under the cowl
+ Made in USA with a lifetime guarantee
Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.
Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. The Burger Tuning oil catch can is the best we have seen so far. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.
The BMS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The BMS OCC also has a factory-like appearance. Since BMS designed their catch can from scratch they can guarantee it fits and performs correctly for the N54/N55 engine, unlike other catch cans on the market that are poorly retrofitted from other applications and under-sized for the N54 engine.
Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles
BMS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ Double-baffled design allows excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Stealth mounting on cooler side of engine bay (promotes condensation of oil to vapor)
+ Anodized black lightweight aluminum
+ N54 version mounts out of sight under the cowl
+ Made in USA with a lifetime guarantee
This item fits the following BMWs with the N54 twin-turbo engine:
2008-2010 E82 BMW 135i
2007-2010 E9X BMW 335i 335xi
2006-2010 E60 BMW 535i 535xiThis item fits the following BMWs with the N54 twin-turbo engine:
2008-2010 E82 BMW 135i
2007-2010 E9X BMW 335i 335xi
2006-2010 E60 BMW 535i 535xi
These kits are designed to be installed inline with your stock low-pressure fuel pump (LPFP). They provide approximately 50% more flow when combined with your stock pump.
Kit includes the following:
*Note: Walbro does not warranty this pump for E85 use. If your application requires an E85 certified pump you may want to consider selecting a Stage 2 fuel kit.
** IMPORTANT: Do NOT attempt to run this kit inline with a Stage 2 kit. The Stage 2 kit is a higher flowing kit and this will not only restrict the flow of the stage 2 kit, it will result in failures.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.
This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.
This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol.
The Stage 2 bucketless kit includes the following:
If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.
The Stage 3 upgrade kit includes:
This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs.
Both options include the following:
To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning)
+ International customers: Due to different emissions requirements, the top portion of your fuel bucket (top hat) is different and doesn't have a large vent tube connection. For this reason, we are no longer sending the top hat to international customers as this often causes confusion. Those customers will simply re-use their current top hat when installing their Stage 2 pump.
- All Stage 2 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt. They are all flow tested and verified before being shipped.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This is a complete Low-Pressure Fuel Pump (LPFP) upgrade that replaces your stock LPFP assembly with a new E85 certified one. The new Walbro 450 pump provides approximately 100% more flow than stock and this assembly can be purchased one of three ways to meet your needs.
Both options include the following:
To be eligible for a core return, the bucket must be completely stock and undamaged. (Pump itself does not have to be functioning)
+ International customers: Due to different emissions requirements, the top portion of your fuel bucket (top hat) is different and doesn't have a large vent tube connection. For this reason, we are no longer sending the top hat to international customers as this often causes confusion. Those customers will simply re-use their current top hat when installing their Stage 2 pump.
- All Stage 2 assemblies are stock buckets that have been rebuilt and may show signs of being disassembled and rebuilt. They are all flow tested and verified before being shipped.
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?
Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.
What is port injection?
Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of. It's a relatively easy system to install and does not require any permanent modification to your car.
Port injection kits are offered in five different packages to meet your needs:
Base port injection kit: (included in Bronze, Silver or Platinum Kits)
Bronze kit includes:
Silver kit includes:
Platinum kit includes:
*These kits are available for off-road use only
*All port injection kits are built to order.
*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.
