This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.
This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.
This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol.
The Stage 2 bucketless kit includes the following:
A custom anodized billet fitting for the pump output and stock fuel line connection.
Our custom billet aluminum anodized bracket for the pump and float assembly
Two cotter pins to secure your float assembly
A new E85 compatible Walbro 450 pump
Spare vent tube clip
A new Walbro filter
If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.
The Stage 3 upgrade kit includes:
A complete plug and play solution by simply adding the secondary module
Our custom billet aluminum fitting to run both pumps in parallel
A new E85 compatible Walbro 450 pump
Wiring harness for the secondary pump
Spare vent tube clip
A new Walbro filter
Recommended accessories:
Lock Ring Removal Tool
Hobb's switch
NOTE: These kits include a basic filter assembly. When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump. In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns. Again for those applications we'd recommend one of our standard pump applications.
This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.
This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.
This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol.
The Stage 2 bucketless kit includes the following:
A custom anodized billet fitting for the pump output and stock fuel line connection.
Our custom billet aluminum anodized bracket for the pump and float assembly
Two cotter pins to secure your float assembly
A new E85 compatible Walbro 450 pump
Spare vent tube clip
A new Walbro filter
If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.
The Stage 3 upgrade kit includes:
A complete plug and play solution by simply adding the secondary module
Our custom billet aluminum fitting to run both pumps in parallel
A new E85 compatible Walbro 450 pump
Wiring harness for the secondary pump
Spare vent tube clip
A new Walbro filter
Recommended accessories:
Lock Ring Removal Tool
Hobb's switch
NOTE: These kits include a basic filter assembly. When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump. In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns. Again for those applications we'd recommend one of our standard pump applications.
Not for sale or use in the state of California on any pollution-controlled vehicle as per the California Air Resources Board.
Prop 65 Warning
Product Q&A
Lifetime Replacement
This Product Is Covered By Our Lifetime Replacement Program
Some PDK components are covered by our Lifetime Replacement Program
Products protected by our Lifetime Replacement Program are covered for as long as you own the product, no need to worry about an expiration date. Purchase your products and enjoy some worry-free motoring, knowing we've got you covered.
If you have any questions, would like to learn more or are ready to place a replacement claim, click here!
This product is not eligible for Lifetime Replacement
Fits These Cars
MAKE
MODEL
SUBMODEL
ENGINE
Special Fitment Notes
BMW
E82
1 M Coupe
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E82
135i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E82
135i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E84
X1 xDrive35i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E88
135i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E88
135i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335xi
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E90
335xi
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335is
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335xi
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335i
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E92
335xi
N55 3.0L
Use vehicle selector to confirm fitment
BMW
E93
335i
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E93
335is
N54 3.0L
Use vehicle selector to confirm fitment
BMW
E93
335i
N55 3.0L
Use vehicle selector to confirm fitment
*The above product applications have been written by Turner Motorsport. All
warranties, product application, fitment, and performance are the responsibility of Turner Motorsport.
For additional information see the terms of use.