Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

OEM VDO Camshaft Reference Sensor -- M52/S52
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:1110
Part#: 12141703221
In Stock
$ 67.99 USD
Free Shipping
$ 67.99 USD
Free Shipping

This is a common failure item which can cause a check engine light, and rough engine running on the M52/S52 engines (328, M3, 528 thru 98, Z3 2.8, & M Roadster/Coupe thru 2000). If you have received an engine fault code suggesting "cam shaft reference sensor" or similar, this is most likely the cuprit. Once replaced, you will need to clear the fault code. We recommend replacing the cam position sensor o-ring at the same time.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:20749249
Part#: VTT-S65-VANOS-CO
In Stock
$ 264.99 USD
Free Shipping
$ 264.99 USD
Free Shipping

BMW S65 4.0L Vanos Covers 7075 provide a robust replacement for the factory plastic covers, which are known to fail over time. These high-performance Vanos covers snap on securely, offering a precise fit to eliminate vibration and prevent chafing of the engagement dogs.

  • High-Strength Construction: Machined from premium 7075 aluminum for superior durability and strength.
  • Corrosion Resistance: Anodized finish ensures long-lasting protection against corrosion.
  • Perfect Fitment: Designed for an exact fit to avoid issues such as vibration and chafing.
  • No Timing Tools Required: Easy installation with no need for engine timing tools.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:557934
Part#: VTT-S55-CBC
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Vargas Turbo Technologies - Corporate Logo
T#:29566613
Part#: VTT-S65-TUBE
Ships in 6 Business Days
$ 147.99 USD
Free Shipping
$ 147.99 USD
Free Shipping
Tired of oil leaks from your plastic OEM S65 spark plug tubes? So were we, so we did something about it! VTT Anodized billet 6061 Aluminum S65 spark plug tubes. We took the OEM tubes and redesigned them. Then machined them out of billet 6061, anodized them in black, and added a US-made Viton O-ring with more surface area to ensure a leak-free connection for the life of your S65 that will not break down over time. These are the perfect to upgrade when doing a VC replacement, or upgrading to VTT Billet S65 VCs! These are available in sets of 8. Kit includes: 8 S65 Billet Spark Plug Tubes
Show More Show Less

Bremmen Parts - Corporate Logo
T#:14915993
Part#: 11127552281M
In Stock
Sale - Save 20% $ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 348.42 USD
Free Shipping
Sale - Save 20%
$ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 348.42 USD
Free Shipping

Upgrade your BMW's engine bay with the Aluminum Valve Cover 11127552281M to eliminate leaks and add a touch of style. This high-quality valve cover ensures a secure seal, preventing leaks and enhancing the aesthetic appeal of your BMW.

  • Aluminum Valve Cover for BMW
  • Eliminates leaks for improved engine performance
  • Adds style to the engine bay
  • High-quality construction for durability and reliability
Show More Show Less
Bremmen Parts - Corporate Logo
T#:14915983
Part#: 11127565284M
In Stock
Sale - Save 20% $ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 349.99 USD
Free Shipping
Sale - Save 20%
$ 435.99

This product was last offered at the strikethrough price on
05-03-2026

$ 349.99 USD
Free Shipping
This aluminum valve cover from Bremmen is designed to eliminate issues stemming from brittle plastic valve covers. Cracked or warped valve covers can cause oil leaks, engine fault codes, vacuum leaks, and misfires.
Show More Show Less

OEM VDO Fuel Pump - E46 323i 325i 328i 330i 1999-2005
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:2781
Part#: 16146766942
Ships in 1 Business Day
$ 194.99

This product was last offered at the strikethrough price on
04-29-2026

$ 180.99 USD
Free Shipping
$ 180.99 USD
Free Shipping

Restore your fuel systems operation with this high quality OEM VDO fuel pump. This fuel pump fits the BMW E46 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci from 1999-2005. This fuel pump is located inside the fuel tank on the right side. Manufactured by VDO. Note not for 325i 325ci with M56 SULEV engine 2003-2006.

Replacement for BMW part # 16146766942, 16141184276, and 16146752499.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2005 E46 BMW 325i 325ci 325xi with M54 engine

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:558084
Part#: VTT-CRANK-BREATH
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

Bremmen Parts - Corporate Logo
T#:11399240
Part#: 11428585235M
In Stock
Sale - Save 25% $ 163.99

This product was last offered at the strikethrough price on
07-14-2026

$ 122.99 USD
Free Shipping
Sale - Save 25%
$ 163.99

This product was last offered at the strikethrough price on
07-14-2026

$ 122.99 USD
Free Shipping

Ensure optimal performance for your BMW with the Turner Motorsport Full Housing Unit, designed for the replacement of units experiencing leaks, cracks, or internal damage. Mounted on the side of the engine, this upgraded full housing unit in metal provides enhanced durability compared to plastic alternatives. The package includes essential components such as the oil filter cover/lid, oil filter lid O-ring, main gasket to the back of the engine, and a heat exchanger. Turner Motorsport recommends using your preferred filter brand with this unit, offering flexibility for personalized maintenance.

  • Replacement for units with leaks, cracks, or internal damage
  • Upgraded full housing in durable metal (Metal vs. Plastic)
  • Mounts conveniently on the side of the engine
  • Includes essential components for a complete replacement
  • Compatibility with preferred filter brands for personalized maintenance
  • OES supplier for quality assurance
Show More Show Less

Macht Schnell - Corporate Logo
T#:593749
Part#: 10.00.011
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:558795
Part#: VTT-CRANKHUB-1
In Stock
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:557938
Part#: VTT-N54-CBC
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice. 

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

  • 1x Aluminum Crank Bolt Capture
  • 8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54 

Show More Show Less


Bremmen Parts - Corporate Logo
T#:14916007
Part#: 127512839M
In Stock
Sale - Save 20% $ 447.99

This product was last offered at the strikethrough price on
05-03-2026

$ 358.22 USD
Free Shipping
Sale - Save 20%
$ 447.99

This product was last offered at the strikethrough price on
05-03-2026

$ 358.22 USD
Free Shipping
Replace your factory plastic valve cover with this durable aluminum replacement from Bremmen Parts!
Vargas Turbo Technologies - Corporate Logo
T#:638889
Part#: VTT-CRANKGUARD
In Stock
Starting at $ 89.99 USD
Free Shipping
Starting at $ 89.99 USD
Free Shipping
It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue
Show More Show Less
Bremmen Parts - Corporate Logo
T#:637132
Part#: 11127646552
In Stock
Sale - Save 17% $ 132.99

This product was last offered at the strikethrough price on
05-03-2026

$ 109.99 USD
Free Shipping
Sale - Save 17%
$ 132.99

This product was last offered at the strikethrough price on
05-03-2026

$ 109.99 USD
Free Shipping
This valve cover solves two problems, either a check engine light code or a oily leaking top portion of the valve cover. Black exterior without front cover & MINI wings logo, replaces your damaged or cracked valve cover. Keeping engine oil in and dirt out! The positives crank ventilation valve (PCV) is integrated into the top of the valve cover and tends to stick, causing massive oil consumption, carbon build-ups, and check engine lights down the road.
Show More Show Less

Bremmen Parts - Corporate Logo
T#:8677184
Part#: 11428583895
In Stock
Sale - Save 20% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.19 USD
Free Shipping
Sale - Save 20%
$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 163.19 USD
Free Shipping
Includes housing, gasket, filter and cap. ​A common cause of intermittent oil leaks on the BMW, the oil filter housing is an extremely complex part. If leaks begin to occur, the only solution is replacement. Losing oil can have dramatically bad consequences. If left unattended, running on low oil levels can cause premature wear in your engine, or worse yet, cause catastrophic failure. This filter housing also includes the caps and seals to make installation easy with all compatible parts included. Don't take a chance on losing oil. Replace your oil filter housing and seal everything back up!
Show More Show Less

Bremmen Parts - Corporate Logo
T#:5649970
Part#: 11127588412KT
In Stock
Sale - Save 18% $ 228.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.18 USD
Free Shipping
Sale - Save 18%
$ 228.99

This product was last offered at the strikethrough price on
05-03-2026

$ 187.18 USD
Free Shipping
Plastic valve covers are prone to warping and becoming brittle over time due to exposure to hundreds of heat cycles. This often leads to cracks or splits that leak oil or check engine lights for vacuum issues. Replacing your worn-out valve cover with a brand new unit is the best option to ensure oil leaks are eliminated and PCV and Vacuum issues no longer result in poor performance. Also includes gaskets, hardware, and a brand new Genuine BMW PCV vent pipe to make changing out your valve cover quick and easy!
Show More Show Less
Bremmen Parts - Corporate Logo
T#:5015326
Part#: 11428585235
In Stock
Sale - Save 11% $ 100.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD
Free Shipping
Sale - Save 11%
$ 100.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD
Free Shipping

Keep your BMW and MINI in optimal condition with the Turner Motorsport Full Housing Unit, designed for the replacement of units experiencing leaks, cracks, or internal damage. This comprehensive unit includes the oil filter set, even though it's not shown, ensuring a complete replacement solution. Mounted on the side of the engine, this housing unit comes with essential components, providing a hassle-free replacement process.

  • Full housing unit for replacement
  • Addresses leaks, cracks, or internal damage
  • Includes oil filter set (not shown)
  • Hassle-free mounting on the side of the engine
  • Components included: Oil Filter Cover/Lid, oil filter elements, Oil Filter lid O-ring, Main gasket to the back of the engine, heat exchanger
  • OES supplier for quality assurance
Show More Show Less

Bremmen Parts - Corporate Logo
T#:640545
Part#: 16147163298
In Stock
Sale - Save 10% $ 148.99

This product was last offered at the strikethrough price on
05-03-2026

$ 134.02 USD
Free Shipping
Sale - Save 10%
$ 148.99

This product was last offered at the strikethrough price on
05-03-2026

$ 134.02 USD
Free Shipping
Sputtering, no starts, or rough idle could be an indication of a failing or failed fuel pump. Also, if your gas gauge is not reading correctly, or not at all, it's probably the level sensor on this pump. Unfortunately, the level sensor is part of the pump assembly and must be replaced as a whole. This replacement Bremmen fuel pump is the perfect option to get your BMW back on the road without draining your wallet.
Show More Show Less
Bremmen Parts - Corporate Logo
T#:11431957
Part#: 11127646555S
In Stock
Sale - Save 30% $ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 109.99 USD
Free Shipping
Sale - Save 30%
$ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 109.99 USD
Free Shipping

Bremmen Parts - Corporate Logo
T#:584116
Part#: 16142229684
In Stock
Sale - Save 36% $ 313.99

This product was last offered at the strikethrough price on
08-05-2026

$ 199.99 USD
Free Shipping
Sale - Save 36%
$ 313.99

This product was last offered at the strikethrough price on
08-05-2026

$ 199.99 USD
Free Shipping
This is the in-tank fuel pump for the E46 M3. The fuel pump in your vehicle is essential for delivering the proper amount of fuel at the correct pressure. Usually, they fail unexpectedly and at the worst possible time. Replace yours to prevent being stranded with a broken fuel pump. This fuel pump installs easily in the place of your broken or worn pump. All wiring connections are the same to make this an easy plug and play installation. Don't take a chance on an inferior fuel pump from the local auto store that may leave you stranded again. Choose a quality unit to ensure thousands of worry free miles. Includes seal.
Show More Show Less

Bremmen Parts - Corporate Logo
T#:556062
Part#: 11317584723
In Stock
Sale - Save 15% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
Sale - Save 15%
$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
Addresses chain slap or other noise caused by a failed or failing tensioner
Cometic - Corporate Logo
T#:568674
Part#: C4328-070
In Stock
$ 245.99 USD
Free Shipping
$ 245.99 USD
Free Shipping
Cometic Head Gaskets are developed with the performance enthusiast in mind. With so many individual requirements for each motor, Cometic offers a number of options to suit your specific motor and needs. *MLS* The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, it’s ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The Viton coating is heat resistant to 2500C or 4820F. The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks. The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design, the MLS gasket promotes an even torque load across the sealing surface allowing for measurably reduced bore distortion. *CFM-20* A perforated steel core with an elastomer surface is ideal for head gaskets allowing heat to be drawn evenly across the gasket surface while providing maximum sealing characteristics when exposed to coolants and oils.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:4813265
Part#: VTT-B58-PCV-CAP
Back Ordered
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
Vargas has developed a solution to problematic PCV systems! Stock diaphragms on the gen-1 B58 Valve cover are fragile and can crack or tear over time. This can cause loss of crankcase vacuum and smoking. The VTT PCV cap replaces the factory plastic cap with a billet aluminum piece which uses a Billet Banjo fitting, and VTT's Vaccum/Boost adapter to move vacuum directly from the head ports to the manifold. This cap will also allow you to run a catch can on the low side if desired. VTT Recommends using this cap alongside their High Side Catch Can and crankcase breather for maximum efficiency. Installation is as simple as popping the stock cap off, removing the diaphragm, and placing the VTT components in place. Kit Includes: One Billet PCV Cap One Billet Banjo Fitting One Vaccum/Boost adapter One line with built-in check valve
Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:18733532
Part#: VTT-CRANKHUB-6
Ships in 1 Business Day
$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD
Free Shipping
$ 939.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
OEM VDO Fuel Injector - N62 Engine
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:380981
Part#: 13647525721
In Stock
$ 118.68 USD
Free Shipping
$ 118.68 USD
Free Shipping

Decreased performance, lower fuel economy and smoke coming from the exhaust could point to failing fuel injectors. Restore your vehicles fuel system back to top shape with OEM VDO fuel injectors.

OEM replacement for BMW part # 13647525721 and 13537506924.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Bremmen Parts - Corporate Logo
T#:640488
Part#: 24117571217
In Stock
Sale - Save 13% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
Sale - Save 13%
$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.89 USD
Free Shipping
GA6HP19Z Automatic Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less

Bremmen Parts - Corporate Logo
T#:641646
Part#: 11617501566S1
In Stock
Sale - Save 15% $ 95.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.59 USD
Free Shipping
Sale - Save 15%
$ 95.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.59 USD
Free Shipping
BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace all the components of the oil separator system together to prevent damage to all the aspects of your engine. Level 1 kit includes the following; Oil separator Hose from oil separator to dipstick tube Hose from oil separator to valve cover Hose from intake manifold back to the connector hose Hose from oil separator up to the intake manifold
Show More Show Less

Bremmen Parts - Corporate Logo
T#:5471013
Part#: 11311741777
In Stock
Sale - Save 15% $ 79.55

This product was last offered at the strikethrough price on
05-03-2026

$ 67.62 USD
Free Shipping
Sale - Save 15%
$ 79.55

This product was last offered at the strikethrough price on
05-03-2026

$ 67.62 USD
Free Shipping
This BMW timing chain deflection rail is "U" shaped and mounted to the front of the engine under the timing cover. Replace yours whenever servicing the timing system. This item fits the following BMWs: 1997-2003 E39 BMW 540i 1996-2001 E38 BMW 740i 740ill 2000-2003 E53 BMW X5 4.4i X5 4.6is 2000-2003 E52 BMW Z8 Alpina Roadster
Show More Show Less
VAC Motorsports - Corporate Logo
T#:7244417
Part#: VAC-OPUK-S54
In Stock
$ 274.99 USD
Free Shipping
$ 274.99 USD
Free Shipping

Bremmen Cylinder Head Valve Cover - with PCV Valve & Gasket - BMW F22...
For vehicles with the N20 engine only (NON-SULEV)
Bremmen Parts - Corporate Logo
T#:3657924
Part#: 11127588412
In Stock
Sale - Save 20% $ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 132.18 USD
Free Shipping
Sale - Save 20%
$ 165.99

This product was last offered at the strikethrough price on
05-03-2026

$ 132.18 USD
Free Shipping
Years of excessive can cause the plastics of your valve cover to become warp or become hard and brittle, leading to cracking and potential oil leak issues. If you are experiencing oil loss, vacuum issues, or even poor running conditions, your valve cover may be the reason why.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:398464
Part#: VTT-N54-INSTL
In Stock
$ 244.99 USD
Free Shipping
$ 244.99 USD
Free Shipping

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos! 

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

VAC Motorsports - Corporate Logo
T#:1061445
Part#: VAC-HPRBK-S65
In Stock
$ 799.99 USD
Free Shipping
$ 799.99 USD
Free Shipping
VAC's S65 bearings are embraced by BMW engine builders world wide. Popular for both forced induction and N/A builds, their coated bearings are "friction resistant" making thermal breakdowns that can occur due to lack of lubrication a much less common occurrence. Helping to prevent premature engine failures on street cars, and spun bearings under stress at the track when things are most critical.
Show More Show Less

Continental - Corporate Logo
T#:21686
Part#: 11377524879
Ships on Sep 3, 2026
$ 426.72

This product was last offered at the strikethrough price on
03-09-2026

$ 279.99 USD
Free Shipping
$ 279.99 USD
Free Shipping

This sensor monitors the position of the Valvetronic eccentric shaft and feeds data back to the ECU. The common issue with this sensor is that it gets contaminated with oil and fails. It doesn't give a fault code or check engine light, however. What you would notice is sluggish driving, hesitation, poor performance, jerky shifts from an automatic, and other drivability issues. These types of issues are typically diagnosed as ignition coils (which are their own issue altogether) but this sensor may also be faulty.

The eccentric shaft sensor is located at the front of the cylinder head and is only accessible with the valve cover off. It's easy to check for oil by removing the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside, or even on the valve cover itself, the sensor is likely contaminated or ready to fail. You can wipe or clean the oil from sitting inside the sensor but it will come back.

If you're planning this job make sure you have our Valve Cover Overhaul Kit, which includes a new seal for the eccentric sensor as well as the rest of the valve cover and Valvetronic gaskets. You can add the valve cover set from the options below.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2011 F25 BMW X3 xDrive28i
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less
Bremmen Parts - Corporate Logo
T#:11726271
Part#: 11127646552R
Ships on Sep 29, 2026
Sale - Save 15% $ 183.99

This product was last offered at the strikethrough price on
05-03-2026

$ 156.05 USD
Free Shipping
Sale - Save 15%
$ 183.99

This product was last offered at the strikethrough price on
05-03-2026

$ 156.05 USD
Free Shipping
Bremmen Parts - Corporate Logo
T#:599553
Part#: 11127646555
In Stock
Sale - Save 35% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.99 USD
Free Shipping
Sale - Save 35%
$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.99 USD
Free Shipping
NOTE: A small additional valve cap comes with this cover and is reinserted after the red pull tab on the back is pulled out. This valve cover solves two problems, either a check engine light code or an oily leaking top portion of the valve cover. Black exterior without MINI wings logo, replaces your damaged or cracked valve cover. Keeping engine oil in and dirt out! The positive crank ventilation valve (PCV) is integrated into the top of the valve cover and tends to stick, causing massive oil consumption, carbon build-ups, and check engine lights down the road. Includes: Valve cover gasket valve cover seals for the spark plug tubes, Oil cap & seal. Red Pull tab and small cap *For MINI Cooper S / JCW ( turbo ) engines. R55 R56 R57 R58 R59+ Gen 2 with N14 Engine.
Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:5309605
Part#: VTT-COIL-N5X-BLU
Ships in 3 Business Days
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7530039
Part#: VACUUMCANRAW
Ships in 1 Business Day
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:49822557
Part#: VTTBS58BLOCK
In Stock
New Item
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:11497328
Part#: VTT-N54-VACUUM-B
Ships in 10 Business Days
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5309610
Part#: VTT-COIL-N5X-RED
In Stock
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Bremmen Parts - Corporate Logo
T#:639830
Part#: 11417614358
In Stock
Sale - Save 10% $ 187.99

This product was last offered at the strikethrough price on
05-03-2026

$ 169.99 USD
Free Shipping
Sale - Save 10%
$ 187.99

This product was last offered at the strikethrough price on
05-03-2026

$ 169.99 USD
Free Shipping

MINI R56 Oil Pump Assembly ensures optimal engine lubrication and performance for your MINI. This high-quality oil pump is engineered to maintain proper oil flow, preventing engine wear and extending the life of critical components. Designed to meet or exceed OEM specifications, it provides reliable performance and durability. Whether you're replacing a worn-out pump or upgrading your engine, this oil pump assembly is essential for keeping your MINI running smoothly.

  • Optimal lubrication: Ensures proper oil flow to critical engine components.
  • High-quality construction: Built to meet or exceed OEM specifications.
  • Enhanced engine life: Helps prevent engine wear and prolongs component life.
  • Reliable performance: Designed for durability and consistent operation.
  • Perfect fitment: Specifically designed for the MINI R56.
Show More Show Less

Bremmen Parts - Corporate Logo
T#:3657913
Part#: 11121432928
In Stock
Sale - Save 20% $ 260.99

This product was last offered at the strikethrough price on
05-03-2026

$ 208.07 USD
Free Shipping
Sale - Save 20%
$ 260.99

This product was last offered at the strikethrough price on
05-03-2026

$ 208.07 USD
Free Shipping
OEM quality replacement valve cover and gasket for a damaged or cracked valve cover.
Bremmen Parts - Corporate Logo
T#:639883
Part#: 11417647376
In Stock
Sale - Save 25% $ 225.99

This product was last offered at the strikethrough price on
08-11-2026

$ 169.49 USD
Free Shipping
Sale - Save 25%
$ 225.99

This product was last offered at the strikethrough price on
08-11-2026

$ 169.49 USD
Free Shipping

Vargas Turbo Technologies - Corporate Logo
T#:638800
Part#: VTT-B58-BREATHER
Ships in 1-2 days
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5″ tall from the valve cover oil cap area, and the filter is 2-3/4″ in diameter NOTE: NOT ALL THE B58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.
Show More Show Less

B58TU / B48TU One Way Crankcase Breather - G Chassis
For models with the Gen2 B58 or B48 engines only (B58TU / B48TU)
Vargas Turbo Technologies - Corporate Logo
T#:25606657
Part#: VTTB58BREATHERTU
In Stock
$ 128.99 USD
Free Shipping
$ 128.99 USD
Free Shipping
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:398463
Part#: VTT-N55-INSTL
Ships in 1 Business Day
$ 222.99 USD
Free Shipping
$ 222.99 USD
Free Shipping

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos! 

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:38924625
Part#: VTT-CRANKBREATHE
In Stock
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. This breather can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including most aftermarket oil catch can systems! The breather sits about 2.5' tall from the valve cover oil cap area, and the filter is 2-3/4' in diameter Is your car a Gen1 or TU? Pull your oil cap off, and check how it attaches. 2 Prong style is Gen-1, snap-in style with grooves is TU.
Show More Show Less


Bremmen Parts - Corporate Logo
T#:637131
Part#: 11127646554
Ships in 8 Business Days
Sale - Save 20% $ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 100.36 USD
Free Shipping
Sale - Save 20%
$ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 100.36 USD
Free Shipping
This valve cover replaces your damaged or cracked valve cover. Keeping engine oil in and dirt out! Black exterior without MINI wings logo. Includes: Valve cover gasket, valve cover seals for the spark plug tube. Oil cap and seal. For MINI Cooper Base engines. R55 R56 R57 R58 R59 & R60 R61 Gen 2 MINIs. Emblem for separate front cover sold separately. The included red key is just a dust protector, it comes out and the valve cover is good to install.
Show More Show Less
Bremmen Parts - Corporate Logo
T#:2393340
Part#: 11137618512
In Stock
Sale - Save 15% $ 110.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.34 USD
Free Shipping
Sale - Save 15%
$ 110.99

This product was last offered at the strikethrough price on
05-03-2026

$ 94.34 USD
Free Shipping
If your oil pan has been damaged because of road debris or the vehicle bottoming out, it is important to replace the oil pan asap to ensure that further damage doesn't lead to a crack or leak that would potentially lead to massive engine failure.
Show More Show Less