BMW Engine Parts

Elevate your BMW maintenance with this comprehensive tool kit designed for valve and valve stem seal removal and replacement, all without the need to remove the head. This time-saving kit ensures efficiency and ease in the process, making it an essential for DIY enthusiasts and professionals alike. The universal fitment and a range of adapters guarantee versatility across various brands and motors, providing maximum utility.

• Removes and replaces valves and valve stem seals without head removal
• Time and effort-saving solution
• Wide range of adapters for versatile use
• Universal fitment for compatibility with different brands and motors
• Essential for DIY and professional use

Contents:

• 1 - Lever Bar
• 4 - Valve Spring Compressor Adapters
• 1 - Slotted/Notched Pulling Device
• 1 - Hook Pulling Device
• 1 - Connector for Valve Spring Adapters
• 1 – Connector for Pulling Device
• 1 - Extension for Valve Spring Adapters

If you have ever attempted to do a valve job or cylinder head gasket project on an M42, M44, M50, or M52 engine you know that the repair manual will refer to the special BMW timing tool kit. This tool kit includes a flywheel locating lock pin, and a special set of camshaft locators that lock the cams in a precise location. The tools are very easy to install. The kit is specifically designed to hold the engine and cams in proper timing during the cylinder head removal and re installation process. This avoids the chance of bending the valves doing the head install process. The precision ground holding blocks lock over the square ends of both intake and exhaust cams. The CNC machined flywheel locating pin passes through a hole in the rear of the engine block and passed through a machined hole in the flywheel.

To avoid improper cam timing on the latest BMW engines, the factory has devised a cam timing system that locks the crankshaft and cams into a specific position prior to cylinder head removal. This method was devised to avoid any misalignment, resulting in piston to valve damage. Unfortunately without these tools re-timing the camshafts after a valve job is almost impossible. The factory specification manual does not supply installation specifications. This cam timing kit includes all the necessary components to do the job.

This item fits the following BMWs:
1990-1991 E30 BMW 318i 318is 318ic
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi

NOTE: Not compatible with S50B30 and S50B32 Euro engines!If you have ever attempted to do a valve job or cylinder head gasket project on an M42, M44, M50, or M52 engine you know that the repair manual will refer to the special BMW timing tool kit. This tool kit includes a flywheel locating lock pin, and a special set of camshaft locators that lock the cams in a precise location. The tools are very easy to install. The kit is specifically designed to hold the engine and cams in proper timing during the cylinder head removal and re installation process. This avoids the chance of bending the valves doing the head install process. The precision ground holding blocks lock over the square ends of both intake and exhaust cams. The CNC machined flywheel locating pin passes through a hole in the rear of the engine block and passed through a machined hole in the flywheel.

 

Timing systems tend to be a weak point in the world of German automotives. Chains stretch over time, sometimes even snapping, and guides wear down to dangerous levels. This can end up be disastrous as too much slack in the chain can mean a slipping timing chain which could lead to timing issues or even a destroyed cylinder head and damaged pistons.

To prevent this from happening to your Mini's N12-16 engine, a timing chain service kit is usually the best answer, refreshing your timing chain, guides and tensioners. You could take your vehicle to the shop and spend an obscene amount of money for this, or simply purchase one of our timing service kits and this tool to do it yourself at home for significantly cheaper and without the hassles of trying to work with only basic hand tools.

This high quality tool kit from Schwaben enables you to service your vehicles timing system with ease and accuracy.

Tool Kit Includes:

• Camshaft locking blocks
• Flywheel locking pin
• Timing chain tension block
• Upper chain tension locks

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

• Setting Range: 45-220 ft lbs (60-300 Nm)
• Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
• Size: 22" (550mm) length for easy leverage
• Accuracy: +- 3%
• Include blow molded holding case
• Requires one 3V CR2030 battery (included)

The Schwaben BMW Balance Shaft Alignment Tool is a specialized engine timing solution required for the correct installation and synchronization of balance shafts. This combination tool is engineered to support N47, B47, and B48 engine platforms, consolidating the functions of multiple OEM tools into a single, high-precision unit.

Using this tool ensures that the balance shafts are locked in the exact timed position during engine rebuilds or repairs, preventing engine vibrations and potential internal damage caused by improper alignment.

FEATURES

Multi-Engine Compatibility - A versatile all-in-one tool designed for BMW N47 diesel engines as well as the newer B47 (Diesel) and B48 (Gasoline) modular engines. OEM Equivalent Performance - Replaces and performs the functions of factory tool codes 11 8 750, 11 8 790, and 2 288 054. Precision Alignment - Locks the balance shafts securely, allowing you to set timing accurately without the risk of the shafts shifting during assembly. Streamlined Workflow - Engineered as a combination tool to handle both older and newer style balance shaft configurations, reducing the number of individual specialty tools needed in your kit. WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.