BMW Engine Parts

Revitalize your BMW's performance with Eldor ignition coils. Sluggish acceleration, misfires, and rusty terminals may indicate a worn coil. Located on the engine's top, these coils require inspection and replacement every 60,000 miles or as needed. Ensure your ignition system is in optimal condition for peak performance.

• Revitalize sluggish acceleration
• Address misfires and rusty terminals
• Inspection and replacement every 60,000 miles
• Harmonize ignition system components
• Unlock hidden horsepower
• Improve fuel economy

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

• MSD Coil Pack
• MSD Wire Set - Red
• Inductance: 7mH
• Maximum Voltage: 36,000 Volts
• Primary Resistance: 0.51 OHMs
• Secondary Resistance: 12K OHMs
• Turns Ratio: 77:1

Key Benefits:

• Upgraded performance over stock coil pack
• Enhances ignition efficiency and engine performance
• High voltage output of 36,000 volts for stronger sparks
• Low primary resistance of 0.51 OHMs for efficient energy transfer
• High secondary resistance of 12K OHMs for improved performance
• Durable construction for long-lasting use

Revitalize your Mini's performance with these spark plug wires and boots, designed to restore power and ensure smooth engine operation. Replace them at 60,000-mile intervals to maintain optimal performance. If you experience low spark or misfires and it's not due to the coil or spark plugs, faulty wires may be the culprit. Don't let rust buildup hinder performance—replace these wires to ensure happy motoring and reliable spark.

• Restores power and performance to your Mini
• Recommended replacement at 60,000-mile intervals
• Addresses issues such as low spark and misfires
• Prevents rust buildup for consistent spark delivery
• Includes plug wires for cylinder 1

From the factory, all BMWs utilize soft rubber or fluid-filled engine mounts. Not only are these mounts prone to degradation, they also allow ample movement of the drivetrain. This translates to looseness in your driveline, commonly associated with missed shifts and a generally isolated feeling.

To improve upon this issue, Black Forest Industries designed these upgraded mounts from the ground up. Their stage one mounts feature a proprietary 65A durometer bushing and bracket/cup design. Maximizing bushing area while minimizing vibration gives this mount the advantage of having the best ride characteristics possible from a urethane mount.

Features:

Perfect fit: Utilizing laser-scanning technology permits seamless integration with the factory engine mount arms. Quality tooling: All bosses are matched replicas with stock locations, and all tool clearances and specs are maintained. Heavy-duty construction: The use of billet aluminum instead of cast creates a mount that is dramatically stronger than its factory cast-construction counterpart. Performance design: 65A durometer bushings are geared toward the spirited driving enthusiast who wants better control over motor movement without sacrificing excessive vibrations. Choose BFI Stage 1 for a quality mount that eliminates drivetrain movement without adding excessive NVH.

From the factory, all BMWs utilize soft rubber or fluid-filled engine mounts. Not only are these mounts prone to degradation, they also allow ample movement of the drivetrain. This translates to looseness in your driveline, commonly associated with missed shifts and a generally isolated feeling.

To improve upon this issue, Black Forest Industries designed these upgraded mounts from the ground up. Their stage one mounts feature a proprietary 85A durometer bushing and bracket/cup design. Maximizing bushing area while minimizing vibration gives this mount the advantage of having the best ride characteristics possible from a urethane mount.

Features:

Perfect fit: Utilizing laser-scanning technology permits seamless integration with the factory engine mount arms. Quality tooling: All bosses are matched replicas with stock locations, and all tool clearances and specs are maintained. Heavy-duty construction: The use of billet aluminum instead of cast creates a mount that is dramatically stronger than its factory cast-construction counterpart. Performance design: 85A durometer bushings are geared toward the spirited driving enthusiast who doesn't mind increasing NVH. Choose BFI Stage 2 for a quality mount that eliminates drivetrain movement.

Note: Stage 2 mounts increase NVH. Therefore, these mounts are not intended to be used on daily driven vehicles.

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!