Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

OEM VDO Camshaft Reference Sensor -- M52/S52
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:1110
Part#: 12141703221
In Stock
$ 67.99 USD
Free Shipping
$ 67.99 USD
Free Shipping

This is a common failure item which can cause a check engine light, and rough engine running on the M52/S52 engines (328, M3, 528 thru 98, Z3 2.8, & M Roadster/Coupe thru 2000). If you have received an engine fault code suggesting "cam shaft reference sensor" or similar, this is most likely the cuprit. Once replaced, you will need to clear the fault code. We recommend replacing the cam position sensor o-ring at the same time.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform

Show More Show Less
BE Bearings - Corporate Logo
T#:403653
Part#: BE-CRB50-S65
In Stock
$ 294.99 USD
Free Shipping
$ 294.99 USD
Free Shipping
Designed by BE Bearings, manufactured by ARP. These custom made rod bolts are designed to be used on BMW factory connecting rods. BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion. Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.
Show More Show Less
BE Bearings - Corporate Logo
T#:403655
Part#: SP1527HKSTDS65
In Stock
$ 589.00 USD
Free Shipping
$ 589.00 USD
Free Shipping

BMW S65 BE Bearings Connecting Rod Bearing Upgrade Set is designed to address the known flaws in the factory BMW rod bearings, particularly for the S65B40 engine. Manufactured by Clevite to BE Bearing specifications, this set provides a crucial upgrade with its enhanced materials and design, ensuring improved performance and durability.

The original BMW bearings have minimal clearance, which leads to premature wear and potential engine failure. This upgrade replaces the tin-aluminum factory bearings with a superior silver-oxide-coated tri-metal "F" series design. The new bearings can handle 30% more load, offer better performance in low oil conditions, and are more forgiving of foreign particles in the oil. Designed specifically for BMW S65 engines, these bearings provide optimal performance for high-horsepower applications.

  • Designed specifically for BMW S65B40 engines
  • Silver-oxide coating withstands 30% more load capacity
  • Improved performance under low-oil and boundary conditions
  • Stronger backing material for enhanced durability
  • Corrects factory BMW rod bearing clearance issue
  • Ideal for high-horsepower applications and factory 10W60 weight oils
  • Complete set for 8 cylinders, ready for installation

Fits the following BMWs:

  • 2008-2013 E9X BMW M3 (S65)
Show More Show Less

OEM VDO Fuel Pump - E46 323i 325i 328i 330i 1999-2005
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:2781
Part#: 16146766942
In Stock
$ 198.99 USD
Free Shipping
$ 198.99 USD
Free Shipping

Restore your fuel systems operation with this high quality OEM VDO fuel pump. This fuel pump fits the BMW E46 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci from 1999-2005. This fuel pump is located inside the fuel tank on the right side. Manufactured by VDO. Note not for 325i 325ci with M56 SULEV engine 2003-2006.

Replacement for BMW part # 16146766942, 16141184276, and 16146752499.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
2001-2005 E46 BMW 325i 325ci 325xi with M54 engine

Show More Show Less

BE Bearings Connecting Rod Bearing Upgrade Set - BMW S85
Now ordered under BE Bearings "SP1527F-STD-S85"
BE Bearings - Corporate Logo
T#:403658
Part#: SP1527HKSTDS85
In Stock
$ 734.00 USD
Free Shipping
$ 734.00 USD
Free Shipping

Designed and manufactured by Clevite to BE Bearing specifications.

These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure.  Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil.

These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating.

  • Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended).
  • Designed with extra clearance to "fix" the BMW rod bearing design flaw.
  • Designed for use with factory 10W60 weight oils.
  • Tri-Armor coated for low conditions during cold start
  • Ideal for start-stop vehicles
  • Applicable for BMW engines S85B50
  • Standard Clearance
  • Sold as complete set (10-cylinders)

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

Show More Show Less
Schrick - Corporate Logo
T#:342372
Part#: 041513800
In Stock
$ 263.99

This product was last offered at the strikethrough price on
07-07-2026

$ 165.00 USD
Free Shipping
$ 165.00 USD
Free Shipping
The roller rocker arms transfer the rotational force of the camshaft to open the intake and exhaust valves. One end is raised and lowered by the rotating lobe of the camshaft, while the other end acts on the associated valve stem. If a roller rocker arm has failed you may experience a constant ticking noise during engine operation, or alternatively if the rocker arm has broken, you will receive multiple misfires and a rough running engine.
Show More Show Less

BE Bearings - Corporate Logo
T#:403657
Part#: BE-CRB50-S85
In Stock
$ 369.00 USD
Free Shipping
$ 369.00 USD
Free Shipping

Designed by BE Bearings, manufactured by ARP.  These custom made rod bolts are designed to be used on BMW factory connecting rods.  BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion.  Their bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP torque specification.

Technical Details:

  • Composition:   ARP2000®
  • Yield strength:   200,000 PSI
  • Tensile strength:   220,000 PSI
  • Torque specification:   50 Ft/Lbs, or 0.0065-0.0070 inch stretch

Fits the following BMWs:
2005-2010 E60 BMW M5
2005-2010 E63/64 BMW M6

Show More Show Less
Fuel Pump
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:384276
Part#: 16146758736
Back Ordered
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Includes fuel pump sending unit

BMW E30 E36 M20 M42 Fuel Pump - Assembly
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:375456
Part#: 16141184022
In Stock
$ 170.99 USD
Free Shipping
$ 170.99 USD
Free Shipping
Includes fuel pump and o-ring

URO Solenoid Valve - 11368605123 - N55 N63 S63
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:2181335
Part#: 11368605123
In Stock
$ 109.24 USD
Free Shipping
$ 109.24 USD
Free Shipping
If your VANOS solenoid has failed, you could experience a poor running condition as well as a loss of power. Two required per car.
Low Pressure Fuel Pump - N52 N54 N55 3.0L
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:588782
Part#: 16147163298
In Stock
$ 158.99 USD
Free Shipping
$ 158.99 USD
Free Shipping

For BMW owners facing issues with their gas gauge or experiencing fuel pump failure, this replacement is the ideal solution.

  • Restores accurate gas gauge readings
  • Addresses fuel pump failure effectively
  • Direct replacement for seamless installation
  • Ensures reliable fuel level monitoring
  • Compatible with various BMW models

Ensure your BMW's fuel system stays in top condition with this reliable replacement, providing accurate gas gauge readings and resolving fuel pump issues.

Show More Show Less
URO PCV Breather Hose Kit - E39, E46, E83
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592719
Part#: BMM54PCVKIT
In Stock
$ 117.99 USD
Free Shipping
$ 117.99 USD
Free Shipping
Comes with everything needed to refresh the PCV System!


Friction Wheel N12 N14 N16 N18 1.6L Engine
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:591689
Part#: 11287598833
In Stock
$ 84.99 USD
Free Shipping
$ 84.99 USD
Free Shipping

Friction Wheel for MINI N12 N14 N16 N18 1.6L Engine - URO

Upgrade your MINI's engine with the Friction Wheel for N12 N14 N16 N18 1.6L engine from URO. This friction wheel serves as a vital link between two pulleys, driving the water pump for optimal engine performance. Over time, the bearings in this unit may begin to squeak and fail, making it essential to replace when changing the serpentine belt.

Benefits:

  • Ensures smooth operation of the water pump
  • Prevents squeaking bearings for quieter engine performance
  • Designed for compatibility with N12 N14 N16 N18 1.6L engines
  • Easy replacement during serpentine belt changes
Show More Show Less
OEM VDO Fuel Injector - N62 Engine
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:380981
Part#: 13647525721
Back Ordered
$ 118.68 USD
Free Shipping
$ 118.68 USD
Free Shipping

Decreased performance, lower fuel economy and smoke coming from the exhaust could point to failing fuel injectors. Restore your vehicles fuel system back to top shape with OEM VDO fuel injectors.

OEM replacement for BMW part # 13647525721 and 13537506924.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
URO - Corporate Logo
T#:9126159
Part#: 11787558087
In Stock
$ 96.29 USD
Free Shipping
$ 96.29 USD
Free Shipping
This direct fit OEM Bosch oxygen sensor plugs directly into your factory connector. Fits N54 engine 1 series, 3 series and Z4. No cutting or splicing required. A new oxygen sensor can improve drivability and lengthen engine life.
Show More Show Less

Glyco - Corporate Logo
T#:375823
Part#: 11211706847
In Stock
$ 136.06

This product was last offered at the strikethrough price on
07-15-2026

$ 125.04 USD
Free Shipping
$ 125.04 USD
Free Shipping
Standard bore

Continental - Corporate Logo
T#:21686
Part#: 11377524879
Ships in 9 Business Days
$ 426.72

This product was last offered at the strikethrough price on
03-09-2026

$ 279.99 USD
Free Shipping
$ 279.99 USD
Free Shipping

This sensor monitors the position of the Valvetronic eccentric shaft and feeds data back to the ECU. The common issue with this sensor is that it gets contaminated with oil and fails. It doesn't give a fault code or check engine light, however. What you would notice is sluggish driving, hesitation, poor performance, jerky shifts from an automatic, and other drivability issues. These types of issues are typically diagnosed as ignition coils (which are their own issue altogether) but this sensor may also be faulty.

The eccentric shaft sensor is located at the front of the cylinder head and is only accessible with the valve cover off. It's easy to check for oil by removing the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside, or even on the valve cover itself, the sensor is likely contaminated or ready to fail. You can wipe or clean the oil from sitting inside the sensor but it will come back.

If you're planning this job make sure you have our Valve Cover Overhaul Kit, which includes a new seal for the eccentric sensor as well as the rest of the valve cover and Valvetronic gaskets. You can add the valve cover set from the options below.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008+ E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2011 F25 BMW X3 xDrive28i
2007-2010 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less
BE Bearings - Corporate Logo
T#:403644
Part#: SP1534HKSTDS54
Ships on Oct 5, 2026
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
NOTE: These bearings are now sold as SP1534F which features a new and improved silver oxide coating that is stronger and more durable! Designed and manufactured by Clevite to BE Bearing specifications. These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure. Furthermore, the factory BMW bearings are made from tin-aluminum which are 5-times harder than a softer lead-copper bearing design. A softer bearing is better for your engine and more tolerant of foreign particles suspended in your oil. These BE Bearings feature a state-of-the-art Clevite Tri-Metal design with the Clevite Tri-Armor(tm) coating. Lead-copper design for greater durability and easy tracking with oil analysis like Blackstone (recommended). Designed with extra clearance to "fix" the BMW rod bearing design flaw. Designed for use with factory 10W60 weight oils. Tri-Armor coated for low conditions during cold start Ideal for start-stop vehicles Applicable for BMW engines S54 Standard size Sold as complete set (6-cylinders) Fits the following BMWs: 2002-2006 E46 BMW M3 S54 2002-2003 Z3 BMW M Coupe, M Roadster S54 2006-2008 Z4 BMW M Coupe, M Roadster S54
Show More Show Less

DSC Pressure Sensor
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:567281
Part#: 34521164458
In Stock
$ 152.99 USD
Free Shipping
$ 152.99 USD
Free Shipping
This sensor is attached to the brake master cylinder
Continental - Corporate Logo
T#:377088
Part#: 16147163298
Ships on Sep 22, 2026
$ 390.88

This product was last offered at the strikethrough price on
08-29-2026

$ 307.99 USD
Free Shipping
$ 307.99 USD
Free Shipping

This is the OEM VDO fuel pump and fuel level sensor for most E82 and E9X cars. If your gas gauge is not reading correctly, or not at all, it's probably the level sensor on this pump. Unfortunately, the level sensor is part of the pump assembly and must be replaced as a whole. This fuel pump fits nearly all E82, E90, E92, and E93 turbo and non-turbo cars.

OEM replacement for BMW part # 16147163298.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

URO Valley Pan With High Performance Gasket - M60 M62
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:361970
Part#: 11141742042
In Stock
$ 72.75 USD
Free Shipping
$ 72.75 USD
Free Shipping

If your vehicle has started leaking coolant around the intake area and it is not the pipes, it is probably the valley pan.

This URO replacement has a high temperature and chemical resistant FKM Fluorocarbon Viton® rubber gasket to reduce the chance of leaks and increase the life of the gasket. This valley pan also features a gasket retention step to keep the gasket in place during installation and also reduce the chance of the gasket blowing out from pressure.

Show More Show Less

OEM Continental Main Drive Belt - E60 M5, E63 M6
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:14491
Part#: 11287838226
In Stock
$ 20.99 USD
Free Shipping
$ 20.99 USD
Free Shipping
This is the replacement serpentine drive belt used on the S85 V10 engine (E60 M5 and E63/E64 M6). This belt measures 6pkx1432.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6
Show More Show Less
Crankshaft Pulley
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:591616
Part#: 11281735358
Ships in 2 Business Days
$ 98.99 USD
Free Shipping
$ 98.99 USD
Free Shipping
Reduces vibrations and connects accessories
Fuel Pump
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:384686
Part#: 16146752368
Back Ordered
$ 128.99 USD
Free Shipping
$ 128.99 USD
Free Shipping
Does not include level sensor or sending unit.


URO - Corporate Logo
T#:395230
Part#: 11127552281
Ships in 2 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
All-in-one valve cover overhaul Preventative replacement saves time and trouble later on Includes new oil separator system Replace valve cover gaskets before a leak becomes worse Replace valve cover before it cracks For the 2007 model year BMW switched to a plastic valve cover on the N51 and N52 engines. As we have seen over time the plastic can crack which leads to oil leaks, vacuum leaks, poor running, and other issues. Unfortunately, it's not just the gasket that needs periodic replacement but the entire valve cover itself. This kit includes a new valve cover, gaskets, eccentric shaft seal, and hardware. The valve cover also incorporates the oil separator which is not a replaceable item on its own. So a complete valve cover replacement will tackle multiple problem areas at once. The valve cover is the same for N51 SULEV and N52 engines. Cracked Valve Cover. The plastic used for the N52 valve cover is thin and weak in certain spots. This makes it prone to hairline or larger cracks that will leak oil and cause vacuum leaks. You might also notice rough running, especially at idle. Often a technician will go looking for a failed ignition coil, spark plug, or failed vacuum hose on the engine. And without a fault code to assist in diagnosis this can often mean wasted time and money. A cracked valve cover is a new problem area that many techs don't think to check. Oil Separator/Crankcase Vent. BMW integrated the oil separator system into the valve cover on these later engines. An internal manifold creates a cyclone effect and centrifugal force separates vapor from the liquid oil. The liquid oil is supposed to drain through the valve cover and back to the oil pan while the remaining vapor is burned up during combustion. It's a very efficient and environmentally-friendly design with very few moving parts. Unfortunately it's not perfect and eventually the internal passageways will become clogged. This problem is made worse in cars that have short drive cycles, sit for long periods of time, do not have frequent oil changes, do not see regular runs to redline, and cars in freezing climates. If the engine never reaches optimal operating temp the oil remains in liquid form or becomes sludge. This is bad news for the entire engine, leading to fouled spark plugs, rough running and misfires and even premature failure of catalytic converters and oxygen sensors. Since the oil separator system in the valve cover is not available on its own, and cleaning it is nearly impossible, the complete replacement of the valve cover is the only option. Other oil vent tubes and vacuum hoses are also recommended to get replaced at the same time. Valve Cover Gaskets. As with any rubber part, failures occur when the rubber becomes dry and brittle. The pliable rubber no longer forms a seal between the cylinder head and valve cover where it will develop an oil leak. Valve cover gaskets that leak can allow oil to seep into the spark plug holes and contaminate ignition coil boots and plugs. That can lead to rough running and misfires. A new valve cover includes new gaskets. Eccentric Shaft Seal. The seal for the eccentric shaft sensor is a known spot for oil leaks. When the seal to the valve cover fails oil can end up in the sensor itself and ruin the sensor (an unecessary $300 expense). Usually a new seal (o-ring) will stop the leaks but sometimes the valve cover is at fault too. A new eccentric shaft seal is included. All new hardware is included to avoid re-using and over-tightening the original bolts (they have a very low torque rating). Replacement requires accessing the rear of the engine with a lot of the upper plastic shrouding removed. The vent hose on the valve cover should be replaced as it is almost always broken anyway (#11157559528). The metal fuel line must also be removed and disconnected from the fuel injectors. Professional installation is encouraged if you have never done this kind of work before. Serious DIY types should have a Bentley Service Manual to use which greatly explains the process. You may also want to combine this work with the oil filter housing gasket replacement. There is no maintenance or replacement interval for the N52 valve cover. However, we have seen cracks and other failures in the 50,000-90,000 mile range. Our best advice is to plan on a major top end overhaul around the 70-80,000 mile mark. There's no mechanical downside to replacing it as prevention and it will make the engine run better and last longer. This item fits the following BMWs: 2008-2012 E82 BMW 128i 2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan 2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon 2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe 2007-2013 E93 BMW 328i - Convertible 2008-2010 E60 BMW 528i 528xi 528i xDrive 2011 F10 BMW 528i 2007-2010 E83 BMW X3 3.0i X3 3.0si 2007-2008 E70 BMW X5 3.0si 2007-2008 E85 BMW Z4 3.0i Z4 3.0si 2009-2010 Z4 BMW Z4 sDrive30i
Show More Show Less
Engine Oil Pan - Lower
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:598884
Part#: 11131702891
In Stock
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping
Uro Engine Oil Pan - E30 M20
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:6795787
Part#: 11131720754
In Stock
$ 308.99 USD
Free Shipping
$ 308.99 USD
Free Shipping
Manufactured to OE dimensions for proper clearance and fitment guaranteed. High-strength construction ensures a warp-free seal between oil pan and engine block with a durable surface coating.

URO Valvetronic Camshaft Adjusting Unit - BMW N52 3.0L
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:8677205
Part#: 11377548388
In Stock
$ 137.99 USD
Free Shipping
$ 137.99 USD
Free Shipping
This new Valvetronic variable valve timing actuator works by adjusting the eccentric shaft, increasing or decreasing valve lift and duration for optimal performance. If your actuator has failed, you will notice a significant power and performance decrease and an engine service light illuminated on the dash. Replace your with this quality URO replacement to restore performance and get your BMW back on the road! Features: Guaranteed fitment High-strength materials withstand engine heat and vibration Manufactured to OE dimensions for proper clearances and alignment Matches OE specifications for proper timing at all engine speeds 24-Month Unlimited Mileage Warranty
Show More Show Less

Fuel Pump
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:373117
Part#: 16141182842
Ships in 2 Business Days
$ 116.99 USD
Free Shipping
$ 116.99 USD
Free Shipping
Includes O-Ring & fuel pump sending unit
Power Steering Pump Pulley
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592383
Part#: 32421722555
Ships in 2 Business Days
$ 90.99 USD
Free Shipping
$ 90.99 USD
Free Shipping
Driven by serpentine accessory belt

Valve Cover - Left
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:583194
Part#: 11127522159
Ships in 2 Business Days
$ 195.37 USD
Free Shipping
$ 195.37 USD
Free Shipping
Valve cover for N62 V8, left bank, Cylinders 5-8 Includes gaskets and bolts.
URO Oxygen Sensor - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:8741231
Part#: 11787576673
In Stock
$ 104.63 USD
Free Shipping
$ 104.63 USD
Free Shipping

Glyco - Corporate Logo
T#:3166
Part#: 11210666110
Ships in 4 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
This E30 M3 Main bearing set is in standard size for the 2.3 liter S14 engine. This main bearing kit includes the thrust bearings.

This item fits the following BMWs:
1988-1991 E30 BMW M3
Show More Show Less

MINI N18 Engine Valve Cover With PCV
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:599579
Part#: 11127646552
Ships in 2 Business Days
$ 195.45 USD
Free Shipping
$ 195.45 USD
Free Shipping

MINI N18 Engine Valve Cover With PCV addresses two common issues: check engine light codes and oily leaks from the top of the valve cover. This replacement valve cover features a black exterior without a front cover or MINI wings logo, effectively replacing damaged or cracked covers. It ensures that engine oil remains contained and prevents dirt from entering.

  • Dual Functionality: Resolves check engine light issues and prevents oil leaks from the valve cover.
  • Integrated PCV Valve: Helps prevent excessive oil consumption, carbon build-ups, and recurring check engine light problems.
  • Complete Kit: Includes valve cover gasket, spark plug tube seals, installation bolts, and oil cap with seal.
  • High-Quality Construction: An OES supplier part designed for reliable performance and a perfect fit.
Show More Show Less
Valvetronic Eccentric Shaft Sensor - E53,E63,E65,E70 - N62
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:34763
Part#: 11377527017
Ships in 4 Business Days
$ 323.19 USD
Free Shipping
$ 323.19 USD
Free Shipping

This Siemens VDO Eccentric Shaft Sensor for the Valvetronic valve timing system on BMW N62,N73, and N62N engines. This sensor is mounted on the rear of the engine near the firewall. Sold individually.

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform

This item fits the following BMWs:
2004-2010 E60 BMW 545i 550i
2004-2010 E63 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2004-2006 E53 BMW X5 4.4i X5 4.8is
2007-2010 E70 BMW X5 4.8i X5 xDrive48i

Show More Show Less
URO Oil Separator Valve - BMW E60 E90 Z4 N52
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592960
Part#: 11617531423
In Stock
$ 57.12 USD
Free Shipping
$ 57.12 USD
Free Shipping
he crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate.
Show More Show Less


URO Fuel Pump Assembly - E46 Non-M
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:373294
Part#: 16146766942
In Stock
$ 115.99 USD
Free Shipping
$ 115.99 USD
Free Shipping

A failing fuel pump has many potential symptoms, including:

hard starting cold or after a heat soak
an illuminated check engine light
engine misfire under load or when cold
stalling
no-start.

Show More Show Less
Crankshaft Pulley With Vibration Damper
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:593668
Part#: 11237564969
Back Ordered
$ 234.99 USD
Free Shipping
$ 234.99 USD
Free Shipping
Every time the cylinders fire, torque is transferred into the crankshaft. The crankshaft deflects under this torque, which sets up vibrations when the torque is released. At certain engine speeds the torque imparted by the cylinders are in synch with the vibrations in the crankshaft, which results in a phenomenon called resonance This resonance causes stress beyond what the crankshaft can withstand, resulting in crankshaft failure. The accessory pulley acts as a balancer and prevents these vibrations from destroying your crankshaft.
Show More Show Less
URO - Corporate Logo
T#:8677206
Part#: 11377548389
Ships in 2 Business Days
$ 128.99 USD
Free Shipping
$ 128.99 USD
Free Shipping
This new Valvetronic variable valve timing actuator works by adjusting the eccentric shaft, increasing or decreasing valve lift and duration for optimal performance. If your actuator has failed, you will notice a significant power and performance decrease and an engine service light illuminated on the dash. Replace your with this quality URO replacement to restore performance and get your BMW back on the road! Features: Guaranteed fitment High-strength materials withstand engine heat and vibration Manufactured to OE dimensions for proper clearances and alignment Matches OE specifications for proper timing at all engine speeds 24-Month Unlimited Mileage Warranty
Show More Show Less

Valve Cover - Right
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:583193
Part#: 11127563474
In Stock
$ 202.28 USD
Free Shipping
$ 202.28 USD
Free Shipping
Valve cover for N62 V8, right bank, Cylinders 1-4 Includes gasket and bolts.

Continental - Corporate Logo
T#:182557
Part#: ADK0023P
Ships in 5 Business Days
$ 236.99 USD
Free Shipping
$ 236.99 USD
Free Shipping
Continental is the OEM supplier for the stock serpentine accessory belt on your M52TU or M54 engine. They are also the OEM for many other components on your entire car. This extensive kit covers many of the common wear items that should be changed any time the serpentine belt is being replaced. As these cars gain years and mileage the belt tensioners will also need to be replaced along with the actual belts. It won't do any good to replace the belt if the tensioners are worn. This kit will save you time and money over buying these pieces individually and you get OEM-quality over any 3rd party aftermarket brands.

Included in the accessory belt and tensioner kit is:
  • main drive belt, 11281706545
  • A/C belt, 11281437450
  • mechanical belt tensioner with pulley, 11281427252
  • A/C belt tensioner with pulley, 11287512758
  • deflection pulley, 11281748130
  • mounting bolts

This kit fits cars with the mechanical belt tensioner only. Generally this is all cars up to 2002 model year but you may want to double check your car and match the picture to the tensioner on your engine. The hydraulic tensioner has a miniature shock absorber on the belt tensioner. You can also tell early from late by the A/C belt. BMW changed the spec from a 5-rib belt up to 2002 to a 4-rib belt from 2003 onwards. This kit does not fit any M56 SULEV engines.

This item fits the following BMWs:
1999-2002 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1999-2002 E39 BMW 525i 528i 530i
2000-2002 E53 BMW X5 3.0i
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
Show More Show Less
Secondary Air Injection Pump - E82 E88 E90 E92 E93
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:2824948
Part#: 11727557903
Ships in 2 Business Days
$ 350.99 USD
Free Shipping
$ 350.99 USD
Free Shipping
The secondary air injection pump injects fresh air into the exhaust stream to help burn off harmful pollutants in the catalytic converter. If the injection pump begins to fail, since it is a vital part of the emissions system, a fault code will be triggered. Sometimes, when pulling off the lower secondary air pipe, you may see water pour out. This is a sign that your pump is more than likely faulty. By simply replacing this pump, efficiency can be restored and there will be no worry about failing an emissions test.
Show More Show Less

Continental - Corporate Logo
T#:182558
Part#: ADK0022P
In Stock
$ 173.99 USD
Free Shipping
$ 173.99 USD
Free Shipping
Continental is the OEM supplier for the stock serpentine accessory belt on your N52 engine. They are also the OEM for many other components on your entire car. This extensive kit covers many of the common wear items that should be changed any time the serpentine belt is being replaced. As these cars gain years and mileage the belt tensioners will also need to be replaced along with the actual belts. It won't do any good to replace the belt if the tensioners are worn. This kit will save you time and money over buying these pieces individually and you get OEM-quality over any 3rd party aftermarket brands.

Included in the accessory belt and tensioner kit is:
  • main drive belt, 11287549150
  • mechanical belt tensioner with pulley, 11287530314
  • deflection pulley, 11287535860
  • mounting bolt

On the N52 engine the main drive belt also runs the A/C compressor and it all runs from one tensioner.

This item fits the following BMWs:
2008-2012 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
Show More Show Less
OEM VDO Left Fuel Level Sensor -- E46 M3
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:393373
Part#: 16142229683
Ships in 3 Business Days
$ 183.99 USD
Free Shipping
$ 183.99 USD
Free Shipping

A failed fuel sensor may give you incorrect readings and leave you stranded on the side of the road without fuel. Restore your fuel systems operation with this high quality OEM VDO fuel level sensor. 

Replacement for BMW part # 16142229683

OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Schrick - Corporate Logo
T#:3572
Part#: TMS3572
Ships on Dec 18, 2026
$ 1,775.98 USD
Free Shipping
$ 1,775.98 USD
Free Shipping
E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less

Schrick - Corporate Logo
T#:11749
Part#: TMS11749
Ships on Dec 18, 2026
$ 824.99 USD
Free Shipping
$ 824.99 USD
Free Shipping
E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:11748
Part#: TMS11748
Ships on Dec 18, 2026
$ 1,867.99 USD
Free Shipping
$ 1,867.99 USD
Free Shipping
E46 M3 with S54 engine Schrick 280 Degree Intake Camshaft with 12.5mm valve lift. A new rocker arm is required (Schrick or new BMW part #11337833259).

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:3501
Part#: 05601880-00
Ships on Dec 18, 2026
$ 490.00 USD
Free Shipping
$ 490.00 USD
Free Shipping
SEE T#338236


Schrick - Corporate Logo
T#:300485
Part#: 261.A1.561-02.C
In Stock
$ 1,401.99 USD
Free Shipping
$ 1,401.99 USD
Free Shipping
URO - Corporate Logo
T#:7530051
Part#: 11367583208
In Stock
$ 201.99 USD
Free Shipping
$ 201.99 USD
Free Shipping
This timing chain camshaft gear controls the camshaft position and timing and is located toward the front of the engine. Located on the exhaust side of the engine at the front end of the exhaust camshaft. Sometimes changed when replacing the timing chain. T#34658 may also be required when servicing this part.
Show More Show Less