Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Macht Schnell - Corporate Logo
T#:593749
Part#: 10.00.011
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation
Show More Show Less
Mahle - Corporate Logo
T#:598529
Part#: 11251437077
Ships in 2 Business Days
$ 37.99 USD
Free Shipping on orders $49 and up

Ensure optimal engine performance in your BMW M50 M52 Engines with Turner Motorsport's Mahle Piston Ring Set. Over time, worn piston rings can lead to power loss, increased oil consumption, and white smoke from the tailpipe. When rebuilding your BMW's engine, replacing the piston rings is essential for restoring power and efficiency. Each set is priced individually, with six sets required for complete engine overhaul.

Key Benefits:

  • Restores engine power and efficiency
  • Reduces oil consumption
  • Prevents white smoke from the tailpipe
  • Compatible with M50 M52 Engines
Show More Show Less
Glyco - Corporate Logo
T#:375825
Part#: 11241284849
Ships in 1 Business Day
$ 92.02

This product was last offered at the strikethrough price on
07-15-2026

$ 84.36 USD
Free Shipping on orders $49 and up
$ 84.36 USD
Free Shipping on orders $49 and up
Standard bore - 45mm

Mahle - Corporate Logo
T#:302764
Part#: 13321262324
In Stock
$ 53.99 USD
Free Shipping on orders $49 and up

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less

Mahle - Corporate Logo
T#:403354
Part#: 13327831089
Ships in 1 Business Day
$ 81.47 USD
Free Shipping on orders $49 and up

Ensure optimal fuel delivery for your BMW's engine with the Turner Motorsport Fuel Filter for E46 M3 & Z3 S54 3.2L Engine. Over time, fuel filters can become clogged, hindering the engine's ability to receive sufficient fuel. This can lead to various fuel-related issues such as surging, stalling, cold start problems, and decreased performance. Replacing the fuel filter with a fresh one helps address these issues and ensures smooth engine operation under various conditions.

Benefits:

  • Improves fuel delivery to the engine
  • Addresses fuel-related problems such as surging and stalling
  • Enhances cold start performance
  • Maintains engine performance under various driving conditions
  • Recommended replacement every 60,000 miles, or more frequently in regions with poor fuel quality
Show More Show Less
Glyco - Corporate Logo
T#:183
Part#: 11241310515
In Stock
$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 30.59

This product was last offered at the strikethrough price on
05-03-2026

$ 27.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
E30 M3, E28 M5, E24 M6, E34 M5 Rod Bearing. Sold individually. Standard sizing.

This item fits the following BMWs
1988-1991 BMW E30 M3 - 8 required.
1988 BMW E28 M5 - 12 required.
1989-1993 BMW E34 M5 3.6 liter - 12 required.
1987-1989 BMW E24 M6 - 12 required.
Show More Show Less

Mahle - Corporate Logo
T#:372182
Part#: 11427837997
Ships in 1 Business Day
$ 23.99 USD
Free Shipping on orders $49 and up
This is an OEM Mahle oil filter for the E9X M3 with S65 engine. Includes the filter, seal, and o-ring.

Glyco - Corporate Logo
T#:375823
Part#: 11211706847
In Stock
$ 136.06

This product was last offered at the strikethrough price on
07-15-2026

$ 125.04 USD
Free Shipping
$ 125.04 USD
Free Shipping
Standard bore

Mahle - Corporate Logo
T#:589332
Part#: 11257566479
Ships in 3 Business Days
$ 28.99

This product was last offered at the strikethrough price on
07-23-2026

$ 24.99 USD
Free Shipping on orders $49 and up
$ 24.99 USD
Free Shipping on orders $49 and up

Stock-Size Piston Ring Set for Engine Head Repair

When it comes to engine head repair or rebuilding, this piston ring set is the perfect choice. Designed to be of stock size, it ensures a precise fit and reliable performance.

Key Details:

  • One set of piston rings is needed for each piston.
  • If your engine head contains four pistons, you'll require four sets to complete the repair.
Show More Show Less
Mahle - Corporate Logo
T#:580988
Part#: KL9
Ships in 1 Business Day
$ 38.13 USD
Free Shipping on orders $49 and up

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less
Sneed4Speed - Corporate Logo
T#:7718954
Part#: 1828313C
In Stock
$ 239.99 USD
Free Shipping on orders $49 and up

Elevate the performance of your BMW MINI S 2011-2015/JCW 2013-2015, and MINI Cooper (NON S) 2007-2015 engines with the Cryogenic Hardened Race N18/N12/N16 Engine Timing Chain Set by Sneed4Speed. Specifically designed for high-performance track and race engines, this set includes a super-strength Cryogenic-hardened timing chain, heavy-duty plastic guides, and a high-strength tensioner. Engineered to withstand track and race conditions, these components also function effectively on the street. Standard equipment in Sneed4Speed Super Sport and Race engines, this set offers durability and reliability.

  • Cryogenic-hardened timing chain for enhanced strength
  • Heavy-duty plastic guides for durability
  • High-strength tensioner built for track and race use
  • Suitable for high-performance track and race engines
  • Compatible with street use
Show More Show Less


Radium Engineering - Corporate Logo
T#:577808
Part#: 20-0373
In Stock at Vendor
$ 259.99 USD
Free Shipping
$ 259.99 USD
Free Shipping
Oil catch cans prevent elevated oil blow by caused by aggressive driving. The Radium Engineering catch can uses a closed loop system and is emissions and track legal, and by not venting to atmosphere avoids any oil smells from getting into the cabin. Kit includes Billet catch can Mounting bracket 10AN hose fittings and adapters 5/8" PCV hose Mounting hardware
Show More Show Less
Mahle - Corporate Logo
T#:384284
Part#: 11428570590
Ships in 5 Business Days
$ 25.67

This product was last offered at the strikethrough price on
07-02-2026

$ 23.14 USD
Free Shipping on orders $49 and up
$ 23.14 USD
Free Shipping on orders $49 and up
Mahle - Corporate Logo
T#:13760053
Part#: 081PI00110000
Ships on Sep 1, 2026
$ 187.99 USD
Free Shipping on orders $49 and up

MINI N18 1.6L Piston - (0 Size) Priced Each 081 PI 00110 000

A crucial component for Mini vehicles, ensuring optimal engine performance and reliability. Engineered with precision and durability, this piston is designed to withstand the demands of the N18 1.6L engine.

  • Genuine Mini quality guarantees reliability and longevity
  • Precision engineering ensures perfect fit and compatibility
  • Enhances engine performance for a smooth and efficient operation
  • Priced affordably for cost-effective maintenance
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.

Mahle - Corporate Logo
T#:367343
Part#: 13321740985
Ships in 1 Business Day
$ 46.05

This product was last offered at the strikethrough price on
07-02-2026

$ 41.46 USD
Free Shipping on orders $49 and up
$ 41.46 USD
Free Shipping on orders $49 and up

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less
Radium Engineering - Corporate Logo
T#:27905095
Part#: 20-0024
In Stock at Vendor
$ 28.99 USD
Free Shipping on orders $49 and up

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose


Rally Road - Corporate Logo
T#:28570819
Part#: B047-KIT
Ships on Sep 8, 2026
$ 209.99 USD
Free Shipping on orders $49 and up
AUTOTECKNIC - Corporate Logo
T#:39971051
Part#: BM-0032
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
A premium dry carbon fiber engine bay upgrade that enhances the performance styling of compatible BMW models with a sleek, UV-resistant finish and easy OEM-style installation.

Sneed4Speed - Corporate Logo
T#:22723735
Part#: 1828212C
In Stock
$ 204.99 USD
Free Shipping on orders $49 and up

Enhance the performance of your MINI S 2002-2006 or convertible until 2008 with the Cryogenic Hardened Race W11/W10 Engine Timing Chain Set. Designed by Sneed4Speed for high-performance track and race engines, this kit is engineered to deliver exceptional strength and reliability.

Key Features:

  • Cryogenic Hardened Timing Chain: This super-strong chain is cryogenically hardened, ensuring it won't stretch like the stock chain.
  • Heavy-Duty Plastic Guides: The kit includes robust plastic guides for added durability.
  • Steel Gears: Steel gears provide reliable performance under high-stress conditions.
  • High-Strength Tensioner: The high-strength tensioner is designed for track and race use while still being street-compatible.

This timing chain set is a standard component in all Sneed4Speed Super Sport and Race engines. Elevate your MINI's performance on and off the track with this high-quality timing chain set.

Show More Show Less

Glyco - Corporate Logo
T#:3166
Part#: 11210666110
Ships in 3 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
This E30 M3 Main bearing set is in standard size for the 2.3 liter S14 engine. This main bearing kit includes the thrust bearings.

This item fits the following BMWs:
1988-1991 E30 BMW M3
Show More Show Less
Mahle - Corporate Logo
T#:363422
Part#: 11427848321
Ships in 3 Business Days
$ 36.64 USD
Free Shipping on orders $49 and up
From an original equipment supplier for your BMW
Mahle - Corporate Logo
T#:392660
Part#: 11427583220
Ships in 1 Business Day
$ 36.51

This product was last offered at the strikethrough price on
04-09-2026

$ 34.46 USD
Free Shipping on orders $49 and up
$ 34.46 USD
Free Shipping on orders $49 and up

This is an OEM Mahle oil filter replacement oil filter kit for vehicles with the N63 & N74 engines. The oil filter prevents contaminants from reaching the engine and causing premature failure. Replace your filter at all recommended service intervals to ensure a long engine life.

Replacement for Genuine BMW part # 11427583220.

Show More Show Less


Sneed4Speed - Corporate Logo
T#:7260311
Part#: 1828344
Ships in 1 Business Day
$ 425.00 USD
Free Shipping on orders $49 and up
Sneed4Speed Street Series Cast Piston Set – N18 "STD" will be printed on the pistons. Please inspect before install. Built for MINI Cooper S (2011–2016) and JCW (2013–2016), this complete piston set is a direct-fit upgrade for your turbocharged N18 engine. Each kit includes pistons, wrist pins, and a full ring set pre-installed for easy assembly. Every piston comes with a 3-ring configuration: a top and second compression ring plus a multi-piece oil control ring (two thin rails with a wavy expander in between). The rings arrive already installed on the pistons, saving you setup time and ensuring proper fitment. Engineered from high-quality cast aluminum, these pistons are designed to safely handle 18–20 PSI of boost on a tuned setup—perfect for street-driven builds looking for reliable performance without stepping up to forged internals.
Show More Show Less
Mahle - Corporate Logo
T#:580985
Part#: KL35
In Stock at Vendor
$ 39.19 USD
Free Shipping on orders $49 and up
$ 39.19 USD
Free Shipping on orders $49 and up
Replacement Fuel Filter
Sneed4Speed - Corporate Logo
T#:30397432
Part#: R56MSK
Ships in 2 Business Days
$ 159.99 USD
Free Shipping on orders $49 and up

AUTOTECKNIC - Corporate Logo
T#:46203538
Part#: ATK-BM-0408-V2
Ships in 7 Business Days
$ 795.00 USD
Free Shipping on orders $49 and up
Transform your G8X engine bay into a true centerpiece with the AutoTecknic Version II Dry Carbon Fiber Engine Cover. Expertly crafted using pre-preg dry carbon and cured in an autoclave, this cover offers a lightweight yet durable upgrade that elevates both performance and aesthetics. The precision 3K twill weave carbon delivers a flawless, uniform pattern, enhanced by a deep gloss UV-resistant clear coat for long-lasting protection against fading and yellowing. What sets this Version II cover apart is the bold tri-colored ///M-inspired stripes, perfectly integrated into the design. Combined with the iconic ///M emblem, the cover captures BMW’s motorsport heritage while adding a modern, aggressive edge to your engine bay. Every detail is engineered for a seamless OEM fit—simply transfer the factory M emblem for a complete installation. Upgrade your G80 M3 or G82/ G83 M4 with this stunning centerpiece and let your engine bay reflect the same dynamic spirit as the car itself.
Show More Show Less

Mahle - Corporate Logo
T#:583654
Part#: 11428507683
Ships in 1-2 days
$ 32.62 USD
Free Shipping on orders $49 and up
OE quality for your BMW
Sneed4Speed - Corporate Logo
T#:14551946
Part#: NSRBS
In Stock
$ 83.99 USD
Free Shipping
$ 83.99 USD
Free Shipping

Sneed4Speed R56 Mini Engine Rod Bearing for N14, N16, N18 1.6L Engine

Upgrade your Mini's engine performance with Sneed4Speed's R56 Mini Engine Rod Bearing, tailored specifically for N14, N16, N18 1.6L engines. Crafted from top-grade materials, these bearings guarantee exceptional performance and durability.

  • Optimized for N14, N16, N18 1.6L engines
  • Enhances overall engine performance
  • Durable construction for long-lasting reliability
  • Precision engineering ensures a perfect fit
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:39971046
Part#: BM-0006-BCG
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up
AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.
Show More Show Less
Sneed4Speed - Corporate Logo
T#:18965470
Part#: NSHBS
Ships in 7 Business Days
$ 74.99 USD
Free Shipping on orders $49 and up

MINI R55+ Sneed4Speed N Series Engine Cylinder Head Bolts Kit

Upgrade your MINI's engine with the MINI R55+ Sneed4Speed N Series Engine Cylinder Head Bolts Kit. Engineered for performance and durability, this kit includes high-quality cylinder head bolts designed specifically for N series engines. Ensure a secure and reliable seal for your cylinder head with this premium bolt kit from Sneed4Speed.

  • Specifically designed for MINI R55+ models
  • High-quality bolts ensure secure cylinder head seal
  • Engineered for performance and durability
  • Provides peace of mind for engine reliability
  • Easy installation for hassle-free upgrade
Show More Show Less

Glyco Main Bearing Set (Standard) - E21, E28, E30
Features All Single-Tang Main Bearings for Earlier M20 Engines
Glyco - Corporate Logo
T#:1196183
Part#: 11211722342
In Stock
$ 259.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD
Free Shipping
$ 231.99 USD
Free Shipping

Sneed4Speed - Corporate Logo
T#:26238455
Part#: R53S4SROD
Ships in 3 Business Days
$ 449.99 USD
Free Shipping on orders $49 and up

Upgrade your Mini's engine with Sneed4Speed Forged H Beam Connecting Rods, designed for the R53 and R52 Supercharged engines, also compatible with the R50/R52 Base Engines. Crafted from 4340 forged steel, these rods are rated to handle up to 700 horsepower, making them ideal for high-power builds. Perfect for budget-conscious builders seeking reliable performance, these rods offer a direct fit and replacement solution. Backed by a 100-year warranty, they provide peace of mind and long-lasting durability. Each rod includes 180,000 psi rated chrome moly rod bolts, capable of supporting up to 1000 HP.

  • Designed for R53 and R52 Supercharged engines, compatible with R50/R52 Base Engines
  • Constructed from 4340 forged steel for strength and durability
  • Rated to handle up to 700 horsepower for high-power builds
  • Ideal for budget-conscious builders seeking reliable performance
  • Direct fit and replacement for easy installation
  • Backed by a 100-year warranty for long-lasting peace of mind
  • Includes 180,000 psi rated chrome moly rod bolts for added strength and support
Show More Show Less
Sneed4Speed - Corporate Logo
T#:7260305
Part#: 182834325
Special Order: No Guaranteed ETA
$ 425.00 USD
Free Shipping on orders $49 and up
"0.25" will be printed on the pistons. Please inspect before install.
Sneed4Speed - Corporate Logo
T#:26238483
Part#: N12PS.5
Ships in 9 Business Days
$ 425.00 USD
Free Shipping on orders $49 and up
"0.50" will be printed on the pistons. Please inspect before install.

Enhance your Mini's engine performance with the R56 N12 Sneed4Speed Street Series Piston (+0.50). This piston set includes a complete ring set, providing everything needed for installation. Each piston features three rings: a top compression ring, a second compression ring, and an oil control ring. The oil control ring is composed of three individual rings, including two thin rings and one wavy metal ring, all installed into a single ring groove on the piston. The pistons come pre-installed with the rings, ensuring a hassle-free installation process.

  • Street Series Piston designed for R56 N12 engines
  • Includes a complete ring set for convenience
  • Three rings per piston: top compression ring, second compression ring, and oil control ring
  • Oil control ring consists of two thin rings and one wavy metal ring
  • Pistons come pre-installed with rings for easy installation
Show More Show Less


Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader
Mahle - Corporate Logo
T#:581126
Part#: OX1773D
Ships in 1 Business Day
$ 24.78 USD
Free Shipping on orders $49 and up
High quality filter
Glyco - Corporate Logo
T#:375824
Part#: 11211706850
In Stock at Vendor
$ 126.61

This product was last offered at the strikethrough price on
07-15-2026

$ 118.92 USD
Free Shipping
$ 118.92 USD
Free Shipping
59.75MM(+0.25) bore

Sneed4Speed - Corporate Logo
T#:19627055
Part#: NS14OPK
Special Order: No Guaranteed ETA
$ 584.99 USD
Free Shipping on orders $49 and up

Mahle - Corporate Logo
T#:594779
Part#: 13321709535
In Stock at Vendor
$ 202.76

This product was last offered at the strikethrough price on
07-02-2026

$ 184.34 USD
Free Shipping
$ 184.34 USD
Free Shipping
A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel-related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.
Show More Show Less
Sneed4Speed - Corporate Logo
T#:7260306
Part#: 182834350
Ships on Sep 1, 2026
$ 425.00 USD
Free Shipping on orders $49 and up
"0.50" will be printed on the pistons. Please inspect before install.

Sneed4Speed - Corporate Logo
T#:15943313
Part#: N14RODOEM
Ships in 1 Business Day
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping

MINI N14 N18 1.6L SNEED4SPEED Stock Connection Rods

A reliable upgrade for Mini vehicles, enhancing engine performance and durability. Engineered with precision and quality materials, these stock connection rods ensure optimal power delivery and longevity for the N14 and N18 1.6L engines.

  • Provides improved strength and durability over stock rods
  • Enhances engine performance for a more exhilarating driving experience
  • Precision engineering ensures perfect fit and compatibility with Mini vehicles
  • Designed for easy installation with no modifications required
Show More Show Less

Sneed4Speed - Corporate Logo
T#:7260314
Part#: 182834450
In Stock at Vendor
$ 425.00 USD
Free Shipping on orders $49 and up
"0.50" will be printed on the pistons. Please inspect before install.

MINI R56 N18 Street Series Piston Set Of 4 - Plus Size 77.50mm (+0.50) is a high-performance upgrade designed to enhance engine performance and reliability. This set includes four pistons with a complete ring set pre-installed.

  • Enhanced Performance: Designed to increase engine displacement with a plus size of 77.50mm (+0.50), improving overall power and efficiency.
  • Complete Ring Set: Each piston comes with three rings: a top compression ring, a second compression ring, and an oil control ring. The oil control ring is made up of three individual rings (two thin rings and one wavy metal ring) all installed in a single groove.
  • Pre-installed Rings: Pistons come with the rings already installed, reducing installation time and complexity.
  • Durable Construction: Crafted as cast pistons for reliable performance under street conditions.
Show More Show Less

Sneed4Speed - Corporate Logo
T#:26538324
Part#: BSCTCK
Ships in 1 Business Day
$ 499.00 USD
Free Shipping on orders $49 and up


Sneed4Speed - Corporate Logo
T#:15943314
Part#: R56S4SROD
Ships in 9 Business Days
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping

Sneed4Speed proudly presents their Forged H Beam Connecting Rods, tailored to fit R56, R55, R57, R58, R59, R60, and R61 MINIs equipped with the N14 and N18 engines. Crafted from resilient 4340 forged steel, these connecting rods are built to withstand the demands of high-performance engines, boasting a remarkable 700 horsepower rating. This makes them a superb choice for budget-conscious builders aiming to achieve significant power gains.

What sets these connecting rods apart is their direct fit and replacement design, ensuring a straightforward installation process for MINI enthusiasts. But that's not all – these rods come backed by an extraordinary 100-year warranty, providing unparalleled peace of mind to vehicle owners.

Furthermore, the kit includes high-quality chrome moly rod bolts, rated at an impressive 180,000 psi, capable of supporting up to 1000 horsepower. Elevate your MINI's performance and reliability with Sneed4Speed's Forged H Beam Connecting Rods.

Show More Show Less
Mahle - Corporate Logo
T#:583570
Part#: 13321709535
Ships in 1 Business Day
$ 220.79

This product was last offered at the strikethrough price on
07-02-2026

$ 198.92 USD
Free Shipping
$ 198.92 USD
Free Shipping

This is an OEM MAHLE fuel filter that removes dirt and other particle contaminants from your fuel.

A clogged fuel filter makes it difficult for your engine to get all the fueling it needs. Filters commonly clog from a deteriorating gas tank, bad fuel, or other debris in the fuel system. A fresh fuel filter addresses many fuel related problems including surging, stalling, cold start issues, and poor performance under a variety of conditions.

Show More Show Less