BMW Engine Parts

N54/N55 Low Temp Oil Thermostat Kit - 70c

T#:52621839

Part#: 008731KT1

In Stock

Sale - Save 23% $ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Qty

Sale - Save 23%

$ 74.98

This product was last offered at the strikethrough price on
05-03-2026

$ 57.74 USD

Add to Wish List

Upgrade your stock oil cooler thermostat for improved performance. Swap your factory 110-degree Celsius thermostat for a new 70-degree Celsius version for faster oil flow and extended temperature control. With oil temperatures reaching 230 degrees Fahrenheit by the time your factory thermostat opens, initiating oil flow at lower temperatures proves more effective than attempting to cool down already elevated temperatures.

Utilizing a factory-style thermostat, this upgrade can be used in all weather conditions and allows your engine to warm up properly, unlike thermostat bypass kits.

Kit contents:

Lower temperature thermostat - 70c (158F) vs Factory 110c (230F)
Low temp thermostat spring

Show More Show Less

ECS Heavy Duty Ground Cable Upgrade (12421737755) - E30, E36, E39, E4...

T#:49996974

Part#: 059235LA01

In Stock

Sale - Save 20% $ 29.99

This product was last offered at the strikethrough price on
06-14-2026

$ 23.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 29.99

This product was last offered at the strikethrough price on
06-14-2026

$ 23.99 USD

Add to Wish List

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On older BMWs, the engine ground strap is a thin, non-insulated cable that spans from the engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for E30 (318i/is), E36, E39, E46, and others Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part numbers 12421737755 and 12421714262.

Show More Show Less

ECS Heavy Duty Ground Cable Upgrade (12427557027) - E70 X5, E71 X6 ...

T#:49996976

Part#: 059261LA01

In Stock

Sale - Save 25% $ 29.99

This product was last offered at the strikethrough price on
06-14-2026

$ 22.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 29.99

This product was last offered at the strikethrough price on
06-14-2026

$ 22.49 USD

Add to Wish List

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E70/E71 BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your BMW X5/X6! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for E70 X5 and E71 X6 applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part number 12427557027.

Show More Show Less

Performance Oil Separator Kit - M52/S52

T#:51356040

Part#: 059015LA02KT2KT

Ships on Oct 5, 2026

Sale - Save 19% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD

Add to Wish List

Qty

Sale - Save 19%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 84.77 USD

Add to Wish List

On M52/S52-equipped BMWs, the factory crankcase ventilation (CCV) system is a notorious weak link. Between brittle plastic corrugated hoses that crumble from heat soak and an internal cyclone diaphragm prone to tearing, a failing CCV leads to massive oil consumption, vacuum leaks, and that dreaded "howling" whistle.

This kit addresses these issues with all new components and hardware. Both oil separator hoses, the cyclone separator itself, the mounting grommet, and the retaining bolts are included. Servicing this system is guaranteed to restore performance lost as a result of worn CCV components.

Kit includes:

Cyclone Separator/Crankcase Pressure Regulator Valve High Performance Silicone Breather Hose Return Hose Mounting Grommet Hex Bolt (3)

Show More Show Less

Rein Turbo Charger Kit - B58

T#:53785545

Part#: TRK0025

In Stock at Vendor

$ 475.99 USD

Add to Wish List

Qty

$ 475.99 USD

Add to Wish List

Rein TechSelect Turbo Kits feature replacements to the OE Turbocharger, including brackets, hardware and gaskets.

Genuine BMW Oil Filter Gasket - S58

T#:50898995

Part#: 11428469100

Ships in 2 Business Days

4% off MSRP $ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Qty

4% off MSRP

$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD

Add to Wish List

Gemini said Seal your S58 oiling system with this filter gasket and hardware!

Bosch Starter Motor With Hardware

T#:56110332

Part#: SR0492NKT4

In Stock

$ 273.99

This product was last offered at the strikethrough price on
08-14-2026

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.

Show More Show Less

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 1 Business Day

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Rein Turbocharger Vacuum Reservoir - E chassis - N54

T#:53856273

Part#: 11652247620

Back Ordered

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

The Rein Automotive OE Series vacuum reservoir is engineered to maintain peak pneumatic response within your vehicle’s forced induction system.

Red B58 BMW Coil Upgrade Adapter Kit - N55

T#:57086690

Part#: BMSN55CUAK-R

Ships on Sep 1, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity.

Show More Show Less

BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit - G2X/G42/A...

T#:49822554

Part#: BMSB58OCCFCDV

Ships on Sep 1, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Keep crankcase vapors in check and your intake air clean with the BMS Oil Catch Can Oil Filler Cap Dual Vent Connection Kit for the Gen2 B58. This upgrade ditches the flimsy factory venting in favor of a precision CNC-machined billet oil filler cap and dual-vent fittings engineered to handle increased crankcase pressure under boost. By diverting oil-laden vapors into a catch can instead of back through the intake, this system helps minimize carbon buildup, reduces oily contamination, and promotes more consistent performance as power levels climb. High-quality hoses and fittings ensure a secure, leak-free install that won’t collapse under pressure and maintains a clean, OE-plus appearance in the engine bay. An easy, effective upgrade for B58 enthusiasts looking for cleaner operation, improved engine longevity, and proven performance-focused design

Show More Show Less

Blue B58 BMW Coil Upgrade Adapter Kit - N55

T#:49857415

Part#: BMSN55CUAK

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Upgrade your N55 ignition system with the N55 → B58 Coil Upgrade Adapter Kit, engineered for a seamless, plug-and-play conversion. This kit lets you run modern B58-style pencil coils on your N55 without modifying the factory harness or compromising valve cover integrity. Why Upgrade: While the N55 is a reliable platform, factory coils can struggle under high boost, heat, and load. B58 coils deliver stronger, more consistent spark, and this adapter kit ensures a clean, OEM-quality integration. Features & Benefits: Direct-fit adapter harness & mounts for straightforward B58 coil installation Plug-and-play design — no cutting, splicing, or permanent modifications Secure coil seating & alignment for consistent performance and reliability Improved ignition stability under high-load or tuned conditions, helping reduce misfires Applications: Stage 1–3 N55 builds, turbo upgrades, ethanol blends, track use, and aggressive daily driving Drivers looking to eliminate heat- and boost-related ignition issues Anyone seeking an OEM+ quality coil upgrade without a messy DIY install Result: A clean, professional installation that modernizes your ignition system and delivers reliable spark performance under all conditions. If you provide the kit’s brand/part number and whether your valve cover is stock or aftermarket, I can refine this description for precise fitment and application.

Show More Show Less

Rein Oil Pan Kit - F48 F39 - B46 B48

T#:55965837

Part#: 11138590017

Ships in 3 Business Days

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Don't let a damaged oil pan sideline your ultimate driving machine. Restore your vehicle's engine protection and structural oil containment with this premium quality oil pan from Rein. This engine oil pan provides a replacement solution for modern BMW and MINI powerplants that have suffered from road hazards or harsh impacts.

Show More Show Less

S65 Timing Chain Kit - E90, E92, M3

T#:55353596

Part#: 11317838479KT2

Ships in 5 Business Days

$ 1,495.99 USD

Add to Wish List

Qty

$ 1,495.99 USD

Add to Wish List

Acoustic Cover - High-Pressure Pump

T#:53608864

Part#: 13515B940B9

In Stock

3% off MSRP $ 31.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Qty

3% off MSRP

$ 31.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 29.99 USD

Add to Wish List

Turbocharger Heat Shield - F9x

T#:56471616

Part#: 11655B4A549

Ships in 8 Business Days

6% off MSRP $ 183.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 172.99 USD

Add to Wish List

Qty

6% off MSRP

$ 183.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 172.99 USD

Add to Wish List

Fuel Injector Replacement Kit - N52

T#:53044116

Part#: 13537531634RKT2

In Stock

Sale - Save 22% $ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Qty

Sale - Save 22%

$ 318.99

This product was last offered at the strikethrough price on
05-03-2026

$ 247.50 USD

Add to Wish List

Restore engine performance and drivability by replacing those old, high mileage fuel injectors. Includes injector clips.

VANOS Rebuild Kit & Exhaust Hub Upgrade - E46 M3, Z3 M, Z4 M (S54) ...

T#:53608871

Part#: 11367832031KT5

Ships on Dec 24, 2026

Sale - Save 31% $ 703.99

This product was last offered at the strikethrough price on
05-30-2026

$ 484.10 USD

Add to Wish List

Qty

Sale - Save 31%

$ 703.99

This product was last offered at the strikethrough price on
05-30-2026

$ 484.10 USD

Add to Wish List

Take the guesswork out of S54 ownership. This all-inclusive kit targets the two most notorious failure points on the BMW S54 engine: broken exhaust hub tabs and degraded internal seals.

Turner Motorsport S54 VANOS Exhaust Hub Upgrade

The factory S54 exhaust hub is a ticking time bomb. Excessive play between the drive tabs and the oil pump disk creates a rhythmic rattling that eventually shears the tabs off, risking catastrophic engine failure.

While other kits require deep-engine surgery, our Turner Motorsport Hub Upgrade offers a "work smarter" approach.

Precision Engineering: Developed using 3D scanning and CAD modeling for a perfect, interference-free fit.

Superior Materials: Machined from high-strength 4340 steel and hardened to OEM specifications.

No Re-Timing Required: This bolt-on fix eliminates the failure point without the need to disassemble the VANOS unit or disturb engine timing, saving hours of labor.

ECS Tuning VANOS Seal Kit

The original BMW seals are made of Buna-N rubber, which quickly hardens and loses its sealing properties when exposed to synthetic oil and high heat. Our ECS engineering team has corrected this flaw.

Viton™ Upgrade: We utilize high-performance Viton O-rings for the internal seals, seal plate, and solenoid.

Chemical Resistance: These seals are designed to remain pliable and effective for the life of the engine, restoring lost low-end torque and smoothness.

ECS Tuning Rattle Repair Kit

Eliminate the dreaded "marbles in a can" sound. This kit addresses the axial play in the VANOS helical gears.

Hardened Steel: Our rings and washers are precision-ground to resist the wear and deformation that lead to engine rattle.

Silent Operation: Restores the refined sound and feel of your S54 across the entire RPM range.

Show More Show Less

Fuel Filter Kit - M57

T#:56291065

Part#: 13327811227KT2

In Stock

$ 55.42 USD

Add to Wish List

Qty

$ 55.42 USD

Add to Wish List

This fuel service kit pairs a high flow OEM replacement fuel filter with a fresh dampening ring and securing hex bolt. By replacing the filter and hardware together, you ensure fuel pressure stability

MINI Oil Service Kit Gen 3 2.0L 0w-20 - Priced As Kit

T#:50766829

Part#: 1142857059024KT

In Stock

$ 109.99 USD

Add to Wish List

Qty

$ 109.99 USD

Add to Wish List

Everything you need to knock out your next oil change with confidence. Packed with factory approved components

JB4PRO Flex Fuel Add On Harness - B58/S58

T#:49822568

Part#: JB4PB58FFAOH

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Take your B58 or S58 build further with the JB4PRO Flex Fuel Add-On Harness—a simple, plug-and-play way to add an ethanol sensor and optional fuel pressure sensor to your JB4PRO setup. Keep your install clean, your wiring organized, and your tune dialed to match every fuel blend in the tank. Why it matters: Plug & Play: Connects directly to your JB4PRO—no cutting or splicing required. Sensor Ready: Supports ethanol and fuel pressure sensors for precise, real-time fueling adjustments. Clean, Safe Installation: Includes a 12 V adapter and inline fuse for hassle-free integration. How it works: This harness links your JB4PRO tuner to your flex fuel hardware. It’s not a complete flex fuel kit—you still need a compatible ethanol sensor—but it gives your JB4PRO the accurate readings it needs to adjust timing, boost, and fueling for E30, E50, or E85 blends.

Show More Show Less

Bremmen Aluminum Valve Cover Kit - N63 S63

T#:56978001

Part#: 11127588545KT2

In Stock

$ 619.99 USD

Add to Wish List

Qty

$ 619.99 USD

Add to Wish List

Maintaining proper crankcase ventilation and positive oil retention is crucial for the performance and longevity of BMW’s high-output twin-turbo 4.4L V8 engines. Extreme engine bay heat cycles cause original plastic covers to warp and internal PCV components to degrade, compromising engine seals and vacuum pressures.

Show More Show Less

Fuel Pump - High Pressure

T#:52586654

Part#: 135175888791KTKT

In Stock

$ 1,575.99 USD

Add to Wish List

Qty

$ 1,575.99 USD

Add to Wish List

Includes $413.00 core charge.

VANOS Exhaust Hub Upgrade Kit - E46 M3, Z3 M, Z4 M (S54)

T#:53608869

Part#: 11367832031KT3

In Stock

Sale - Save 37% $ 410.99

This product was last offered at the strikethrough price on
05-30-2026

$ 257.29 USD

Add to Wish List

Qty

Sale - Save 37%

$ 410.99

This product was last offered at the strikethrough price on
05-30-2026

$ 257.29 USD

Add to Wish List

The factory VANOS exhaust hub on the S54 engine is known to develop excessive play where the drive tabs interface with the oil pump disk. Over time, this imprecise fitment causes a back-and-forth rattling motion that can result in the tabs shearing off inside the engine, risking catastrophic damage or complete engine failure. Unlike other aftermarket solutions that require full VANOS disassembly, retiming, or replacement of the oil pump disk, the Turner Motorsport S54 VANOS Hub Upgrade offers a smarter approach. Our bolt-on fix eliminates the common failure point without opening the VANOS unit or disturbing engine timing.

Our solution involves removing the worn tabs from your stock exhaust hub and installing our precision-fit replacement, which is precision-machined from 4340 steel and hardened to meet OEM specifications. Designed using 3D scanning and CAD modeling, the Turner Motorsport VANOS Exhaust Hub Upgrade provides a tight, interference-free fit into the oil pump disc, completely resolving the issue without unnecessary labor.

Features & Benefits:

Direct bolt-on solution for S54 VANOS oil pump drive tab failure, preventing potentially catastrophic damage to engine internals Precision-machined from high-strength 4340 steel and heat-treated to match OEM specifications Designed using 3D scanning and CAD modeling to ensure precise fitment within the OEM oil pump disc Engineered to eliminate the play that exists between the exhaust hub and oil pump disc from factory Backed by extensive real-world testing and our lifetime replacement program! Kit Contents:

Turner Motorsport Exhaust VANOS Hub Upgrade 4x Extended Length Hex Head Bolts (M6x30 Gr. 10.9) 8x OEM BMW VANOS Hub Hex Head Bolts (M6x25) 12x Fillister Head Torx Screw (M6x16) OEM Valve Cover Gasket OEM VANOS to Cylinder Head Gasket

Show More Show Less

Schwaben Piston Ring Specialty Toolset

T#:53361638

Part#: 3594SCH01AKT

In Stock

Sale - Save 7% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.07 USD

Add to Wish List

Qty

Sale - Save 7%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.07 USD

Add to Wish List

Whether you are building a high-performance engine or simply performing a routine rebuild, getting your piston ring end gaps and installation right is critical for optimal engine performance, compression, and longevity. Designed to meet strict standards, this comprehensive toolset provides everything you need to file, measure, and install piston rings safely without causing damage.

KIT CONTENTS

Schwaben Piston Ring Filer

Easily modify piston rings for OEM engine rebuilds and boosted applications Cuts quickly and smoothly, allowing you to easily avoid filing in excess Durable, bench-mountable construction with a long-lasting diamond abrasive wheel Piston Ring Installation Tool

Ensures even tension distribution during expansion Accommodates all pistons ranging from 60 mm to 175 mm in diameter Features an easy thumb-release locking mechanism for quick and secure operation Feeler Gauge Set

16 blades - 0.002-0.025 inch thickness measurements

Show More Show Less

Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52

T#:56110313

Part#: 11787558055KT

In Stock

$ 307.99

This product was last offered at the strikethrough price on
08-13-2026

$ 304.99 USD

Add to Wish List

Qty

$ 304.99 USD

Add to Wish List

Your engine's air fuel ratio needs to be dead on. Worn out factory pre-cat oxygen sensors delay vital data to the DME, leading to sub optimal fueling, lost horsepower, and dangerous hesitation under load.

Show More Show Less

Genuine BMW Oil Pan Gasket With Oil Pan Bolt Set - N55

T#:56038085

Part#: 11137600482KT4

In Stock

$ 130.99 USD

Add to Wish List

Qty

$ 130.99 USD

Add to Wish List

This Hardware & Gasket Refresh Kit takes the guesswork out of maintenance. This kit bundles a high quality replacement oil pan gasket with a fresh, complete set of factory spec aluminum hardware. Whether you are dropping the subframe for a preventative overhaul or chasing down an active oil leak

Show More Show Less

Mitsubishi Turbocharger With Manifold And Gasket - F39, F48 - B48 ...

T#:56254773

Part#: 11658626637KT3

In Stock

$ 1,317.99 USD

Add to Wish List

Qty

$ 1,317.99 USD

Add to Wish List

This turnkey replacement package pairs the genuine Mitsubishi OEM Turbocharger with a new Exhaust Manifold Gasket to restore instant boost delivery and leak free performance.

Oil Drain Plug With 4 Crush Washers

T#:55209893

Part#: 071199631KT

In Stock

$ 2.80 USD

Add to Wish List

Qty

$ 2.80 USD

Add to Wish List

The Genuine BMW Performance Sealing Washer Kit features the foundational hardware required to complete your top-end or track-day prep correctly.

Left Outer Engine Bay Partition Kit

T#:55317666

Part#: 51757LOEBPKT

In Stock

$ 54.04 USD

Add to Wish List

Qty

$ 54.04 USD

Add to Wish List

Keep your chassis protected from track day debris and daily road grime with the Genuine BMW Outer Left Engine Bay Partition Kit.

Rear Oxygen Sensor Set - N52, N54

T#:55353594

Part#: 11787545074/5KT2

In Stock

$ 366.99 USD

Add to Wish List

Qty

$ 366.99 USD

Add to Wish List

Sluggish oxygen sensors do a lot more than just light up your dashboard with an annoying Check Engine Light—they directly choke your BMW’s performance.

Turbo Oil Feed Line Kit - E70 M57 3.0L

T#:51883690

Part#: 11427808153KT

Ships in 2 Business Days

$ 412.99 USD

Add to Wish List

Qty

$ 412.99 USD

Add to Wish List

The oil feed lines for the M57's turbochargers are known to leak as they age, especially the J Line at the top of the engine due to its tight bend. This kit includes all three replacement oil feed lines, plus the banjo bolts and sealing washers needed to install them.

Show More Show Less

Bosch Oxygen Sensor Set - Pre and Post Catalytic Converter - N55 ...

T#:55857772

Part#: 11787589475KT2

In Stock

$ 335.99 USD

Add to Wish List

Qty

$ 335.99 USD

Add to Wish List

Extreme exhaust heat and carbon buildup degrade your factory oxygen sensors over time, sending lazy data to your DME and robbing you of performance.

King Bearings S65 Performance Rod Bearing Replacement Kit

T#:56218621

Part#: CR8066GPCKT2

In Stock at Vendor

$ 976.99

This product was last offered at the strikethrough price on
08-14-2026

$ 974.99 USD

Add to Wish List

Qty

$ 974.99 USD

Add to Wish List

We built this S65 Rod Bearing Refresh Kit to deliver proven reliability under severe operating conditions. Anchored by King’s Coated GPC Rod Bearings, this kit utilizes specialized polymer coatings to resist scuffing, handle elevated oil temperatures

Show More Show Less

Turbocharger With Manifold And Gasket - F39, F48

T#:56291070

Part#: 11658626637KT4

In Stock

$ 1,317.99 USD

Add to Wish List

Qty

$ 1,317.99 USD

Add to Wish List

This kit pairs a precision-engineered Mitsubishi Turbocharger Assembly with an OEM Exhaust Manifold Gasket to ensure complete manifold to head sealing and peak efficiency

Turbos and Turbocharger Installation Kit - N54

T#:55317702

Part#: 13712247398KT5

In Stock

$ 1,869.05 USD

Add to Wish List

Qty

$ 1,869.05 USD

Add to Wish List

Are your factory N54 turbos plagued by the dreaded wastegate rattle, or worse, starting to blow smoke? Don't just replace them—upgrade your ultimate driving machine with the ultimate DIY refresh kit.

Show More Show Less

Dipstick Tube Sealing Kit

T#:55317660

Part#: 1143DTSKT

In Stock

$ 16.08 USD

Add to Wish List

Qty

$ 16.08 USD

Add to Wish List

Keep your BMW's engine bay dry and your crankcase pressure sealed properly with this Genuine BMW lower dipstick tube sealing kit.

King Bearings S85 Performance Rod Bearing Replacement Kit

T#:56218616

Part#: CR1057GPCKT2

In Stock

$ 1,110.99 USD

Add to Wish List

Qty

$ 1,110.99 USD

Add to Wish List

At the heart of this kit are King's S85 Coated & Graded GPC rod bearings which are engineered to handle high thermal loads, provide superior oil film retention, and offer enhanced protection during cold starts and high RPM runs.

Show More Show Less

Shifter Rebuild Hardware Kit

T#:55209882

Part#: 07119905KT

In Stock

$ 4.80 USD

Add to Wish List

Qty

$ 4.80 USD

Add to Wish List

Intake Manifold & Sensor Seal Refresh Kit

T#:55317699

Part#: 116117IMKT

In Stock

$ 51.74 USD

Add to Wish List

Qty

$ 51.74 USD

Add to Wish List

Turner Motorsport offers this direct-fit Intake Manifold and Air Temp Sensor Seal Kit to eliminate modern vacuum leaks before they spoil your driving experience.

Front Oxygen Sensor Set - E9x, E82, E88, Z4

T#:55317713

Part#: BFR1/2O2SKT2

In Stock

$ 400.99

This product was last offered at the strikethrough price on
07-14-2026

$ 333.99 USD

Add to Wish List

Qty

$ 333.99 USD

Add to Wish List

Over time, that degradation robs your BMW of its crisp throttle response, tanks your fuel economy, and leaves you staring at a failed emissions ticket

Oil Cooler O-Ring Kit

T#:55245835

Part#: 11421703XKT

In Stock

$ 11.20 USD

Add to Wish List

Qty

$ 11.20 USD

Add to Wish List

This Genuine BMW Oil Cooler O-Ring Kit brings together the exact factory-spec seals needed to overhaul your lines and oil thermostat assembly.

Throttle Body & Intake Gasket Kit

T#:55317667

Part#: 1161TBIPGKT

In Stock

$ 28.70 USD

Add to Wish List

Qty

$ 28.70 USD

Add to Wish List

This Throttle Body and Intake Profile Gasket Kit features a factory Genuine BMW profile gasket paired with a robust Victor Reinz throttle body housing gasket.

Genuine BMW Oil Pan Replacement Kit with Gasket and Hardware - N55 ...

T#:56038088

Part#: 11137600482KT5

In Stock

$ 267.72 USD

Add to Wish List

Qty

$ 267.72 USD

Add to Wish List

This overhaul kit tackles the oil pan leak head-on while giving you a complete, high-performance oil service in one shot. It features a heavy-duty oil pan gasket paired with the mandatory single-use aluminum stretch bolts that must be replaced during installation.

Show More Show Less

King X-Series Bearings S65 Performance Rod Bearing Replacement Kit ...

T#:56218624

Part#: CR8066GPCXKT2

In Stock at Vendor

$ 976.99

This product was last offered at the strikethrough price on
08-14-2026

$ 974.99 USD

Add to Wish List

Qty

$ 974.99 USD

Add to Wish List

We built this S65 Rod Bearing Refresh Kit to deliver proven reliability under severe operating conditions. Anchored by King’s X-series Coated GPC Rod Bearings, this kit utilizes specialized polymer coatings to resist scuffing, handle elevated oil temperatures

Show More Show Less

S65 High Performance Rod Bearing And Bolt Set - E9x

T#:55857735

Part#: S65BABKT2

In Stock

$ 547.99 USD

Add to Wish List

Qty

$ 547.99 USD

Add to Wish List

We’ve packaged the ultimate preventative maintenance solution to keep your high-revving 4.0L V8 screaming all the way to its 8,400 RPM redline with peace of mind. This kit combines the industry's most trusted bearings with high-strength fasteners to eliminate the S65’s biggest Achilles' heel.

Show More Show Less

Elring Oil Pan Gasket And CRP Hardware Set

T#:56218592

Part#: 1137548031ELRKT2

In Stock

$ 82.99 USD

Add to Wish List

Qty

$ 82.99 USD

Add to Wish List

This Oil Pan Refresh Kit pairs a high tier Elring sealing gasket with the complete factory spec aluminum bolt set required for proper reassembly.

Throttle Body & Valve Cover Gasket Kit

T#:55317701

Part#: 1161N47TBKT

In Stock

$ 56.01 USD

Add to Wish List

Qty

$ 56.01 USD

Add to Wish List

This Turner Motorsports Gasket Kit combines the throttle body profile gasket and the valve cover gasket set into a single, track-tested maintenance bundle.

King X-Series Bearings S85 Performance Rod Bearing Replacement Kit ...

T#:56218619

Part#: CR1057GPCXKT2

In Stock

$ 1,110.99 USD

Add to Wish List

Qty

$ 1,110.99 USD

Add to Wish List

At the heart of this kit are King's S85 Coated & Graded GPC rod bearings which are engineered to handle high thermal loads, provide superior oil film retention, and offer enhanced protection during cold starts and high-RPM runs

Show More Show Less

Performance Connecting Rod Bolt And Bearing Kit - S85

T#:55317700

Part#: S85RBKT2

In Stock

$ 1,103.00 USD

Add to Wish List

Qty

$ 1,103.00 USD

Add to Wish List

From the factory, the S85’s rod bearing clearances are notoriously tight. Over time, this lack of adequate oil clearance leads to premature wear, accelerated friction, and the looming threat of catastrophic engine failure.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results