Find Parts That Fit Your Vehicle

BMW Engine Parts

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Bavarian Autosport - Corporate Logo
T#:640209
Part#: 11368605123
In Stock
Sale - Save 20% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.99 USD
Free Shipping
Sale - Save 20%
$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.99 USD
Free Shipping
If your VANOS solenoid has failed, you could experience a poor running condition as well as a loss of power. Two required per car.
Schrick - Corporate Logo
T#:342372
Part#: 041513800
In Stock
$ 263.99

This product was last offered at the strikethrough price on
07-07-2026

$ 165.00 USD
Free Shipping
$ 165.00 USD
Free Shipping
The roller rocker arms transfer the rotational force of the camshaft to open the intake and exhaust valves. One end is raised and lowered by the rotating lobe of the camshaft, while the other end acts on the associated valve stem. If a roller rocker arm has failed you may experience a constant ticking noise during engine operation, or alternatively if the rocker arm has broken, you will receive multiple misfires and a rough running engine.
Show More Show Less
King - Corporate Logo
T#:599337
Part#: MB7776SI
In Stock
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.
Show More Show Less

Bavarian Autosport - Corporate Logo
T#:19560853
Part#: 11127848154
In Stock
Sale - Save 15% $ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 385.89 USD
Free Shipping
Sale - Save 15%
$ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 385.89 USD
Free Shipping

Bavarian Autosport - Corporate Logo
T#:19560852
Part#: 11127848153
Ships on Sep 15, 2026
Sale - Save 15% $ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 385.89 USD
Free Shipping
Sale - Save 15%
$ 453.99

This product was last offered at the strikethrough price on
05-03-2026

$ 385.89 USD
Free Shipping
Fuel Pump
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:384276
Part#: 16146758736
In Stock
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Includes fuel pump sending unit

King - Corporate Logo
T#:597154
Part#: MB7776SI0.25
In Stock
$ 118.99 USD
Free Shipping
$ 118.99 USD
Free Shipping
Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.
Show More Show Less
URO PCV Breather Hose Kit - E39, E46, E83
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:592719
Part#: BMM54PCVKIT
In Stock
$ 117.99 USD
Free Shipping
$ 117.99 USD
Free Shipping
Comes with everything needed to refresh the PCV System!

Low Pressure Fuel Pump - N52 N54 N55 3.0L
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:588782
Part#: 16147163298
In Stock
$ 158.99 USD
Free Shipping
$ 158.99 USD
Free Shipping

For BMW owners facing issues with their gas gauge or experiencing fuel pump failure, this replacement is the ideal solution.

  • Restores accurate gas gauge readings
  • Addresses fuel pump failure effectively
  • Direct replacement for seamless installation
  • Ensures reliable fuel level monitoring
  • Compatible with various BMW models

Ensure your BMW's fuel system stays in top condition with this reliable replacement, providing accurate gas gauge readings and resolving fuel pump issues.

Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7624643
Part#: 116183
In Stock
$ 190.00 USD
Free Shipping
$ 190.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.
Show More Show Less
URO Solenoid Valve - 11368605123 - N55 N63 S63
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:2181335
Part#: 11368605123
In Stock
$ 109.24 USD
Free Shipping
$ 109.24 USD
Free Shipping
If your VANOS solenoid has failed, you could experience a poor running condition as well as a loss of power. Two required per car.
Bavarian Autosport - Corporate Logo
T#:638073
Part#: 11127552281
In Stock
Sale - Save 20% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 235.19 USD
Free Shipping
Sale - Save 20%
$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 235.19 USD
Free Shipping
Years of excessive can cause the plastics of your valve cover to become warp or become hard and brittle, leading to cracking and potential oil leak issues. If you are experiencing oil loss, vacuum issues, or even poor running conditions, your valve cover may be the reason why. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less


BMW E30 E36 M20 M42 Fuel Pump - Assembly
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:375456
Part#: 16141184022
In Stock
$ 170.99 USD
Free Shipping
$ 170.99 USD
Free Shipping
Includes fuel pump and o-ring
Friction Wheel N12 N14 N16 N18 1.6L Engine
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:591689
Part#: 11287598833
In Stock
$ 84.99 USD
Free Shipping
$ 84.99 USD
Free Shipping

Friction Wheel for MINI N12 N14 N16 N18 1.6L Engine - URO

Upgrade your MINI's engine with the Friction Wheel for N12 N14 N16 N18 1.6L engine from URO. This friction wheel serves as a vital link between two pulleys, driving the water pump for optimal engine performance. Over time, the bearings in this unit may begin to squeak and fail, making it essential to replace when changing the serpentine belt.

Benefits:

  • Ensures smooth operation of the water pump
  • Prevents squeaking bearings for quieter engine performance
  • Designed for compatibility with N12 N14 N16 N18 1.6L engines
  • Easy replacement during serpentine belt changes
Show More Show Less
Bavarian Autosport - Corporate Logo
T#:2119641
Part#: 13537574132KT1
In Stock
$ 239.99 USD
Free Shipping
$ 239.99 USD
Free Shipping

MINI R52 R53 JCW Fuel Injector - Set Of 4

Upgrade your MINI with the MINI R52 R53 JCW Fuel Injector - Set Of 4, designed for enhanced performance. Whether you're tuning your W11 Supercharged engine above 200HP+ or replacing injectors in JCW engines, these OEM-designed injectors deliver reliable fuel flow and efficiency.

Key Benefits:

  • OEM design ensures perfect fit and function
  • Suitable for W11 Supercharged engines with tuned setups
  • Direct replacement for JCW engines in R52 S and R53 models
  • Features a two-hole 380cc design for optimal fuel delivery

Bavarian Autosport served the needs of BMW and MINI enthusiasts from 1974-2019. In 2019, ECS Tuning acquired the Bavarian Autosport brand, committing to continuing the tradition of excellence Bav Auto is known for. Over the years, Bav developed their own brand of parts, accessories and upgrades. A lot of these parts are engineered and built by OEMs (Original Equipment Manufacturers – companies who make original parts for BMW, MINI, and other European marques). Just as MINI, we work with a variety of manufacturers in Europe, Asia and North America. In many cases, we have sourced parts that are superior to Original Equipment.

A lot of time and resources have been put into developing and evaluating these products, as well as the companies who produce them. We stand behind every product we sell. If any product fails to meet our standards — or our customers' expectations — we won't sell it, and we're certainly not going to put the Bavarian Autosport name on it. In fact, we're so confident in the quality of these parts that we back every Bavarian Autosport brand part with a 2-year warranty.

Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7593110
Part#: 11636
In Stock
$ 150.00 USD
Free Shipping
$ 150.00 USD
Free Shipping
This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. 10 gated holes control oil slosh in the sump. A must have for all track cars. **Note: Requires Welding to install. Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars.
Show More Show Less

Bav Auto Variable Engine Timing Solenoid Switch - BMW E39 E46 E53 E83...
Requires use of open-ended wrench for installation - does not fit BMW specific socket tool
Bavarian Autosport - Corporate Logo
T#:599824
Part#: 11361432532
In Stock
Sale - Save 20% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.19 USD
Free Shipping
Sale - Save 20%
$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 75.19 USD
Free Shipping
This solenoid works with the VANOS engine timing system to improve horsepower and torque throughout the RPM range. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less
VAC Motorsports - Corporate Logo
T#:7244417
Part#: VAC-OPUK-S54
In Stock
$ 274.99 USD
Free Shipping
$ 274.99 USD
Free Shipping

King - Corporate Logo
T#:4840520
Part#: CR6640XP
In Stock at Vendor
$ 163.99

This product was last offered at the strikethrough price on
05-22-2026

$ 148.99 USD
Free Shipping
$ 148.99 USD
Free Shipping
These King Performance Series bearings are recommended for performance applications. These bearings are designed for aftermarket gasoline or diesel engine rebuilding and performance engines with OE or upgraded crankshafts. These King Performance Series bearings have an improved crankshaft finish for reducing microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts. The bearings feature improved oil clearance to reduce wear and increase engine life, which in turn reduces operating noise, vibration, and excess oil flow.
Show More Show Less
VAC Motorsports - Corporate Logo
T#:1061445
Part#: VAC-HPRBK-S65
In Stock
$ 799.99 USD
Free Shipping
$ 799.99 USD
Free Shipping
VAC's S65 bearings are embraced by BMW engine builders world wide. Popular for both forced induction and N/A builds, their coated bearings are "friction resistant" making thermal breakdowns that can occur due to lack of lubrication a much less common occurrence. Helping to prevent premature engine failures on street cars, and spun bearings under stress at the track when things are most critical.
Show More Show Less

URO Front Oxygen Sensor - Bank 2 Pre-Cat - E82 E88 135i 1 M Coupe ...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:9126159
Part#: 11787558087
Ships in 1 Business Day
$ 96.29 USD
Free Shipping
$ 96.29 USD
Free Shipping
This direct fit OEM Bosch oxygen sensor plugs directly into your factory connector. Fits N54 engine 1 series, 3 series and Z4. No cutting or splicing required. A new oxygen sensor can improve drivability and lengthen engine life.
Show More Show Less

DSC Pressure Sensor
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:567281
Part#: 34521164458
In Stock
$ 152.99 USD
Free Shipping
$ 152.99 USD
Free Shipping
This sensor is attached to the brake master cylinder
Bavarian Autosport - Corporate Logo
T#:638092
Part#: 11127512839
In Stock
Sale - Save 20% $ 252.99

This product was last offered at the strikethrough price on
05-03-2026

$ 202.39 USD
Free Shipping
Sale - Save 20%
$ 252.99

This product was last offered at the strikethrough price on
05-03-2026

$ 202.39 USD
Free Shipping
Direct replacement for cracked, leaky, warped, or otherwise failing plastic valve covers. Fits a variety of vehicles, including E39, E46, E53, E60, E83, and Z4 chassis' equipped with the M54 engine.
URO Valvetronic Camshaft Adjusting Unit - BMW N52 3.0L
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:8677205
Part#: 11377548388
In Stock
$ 137.99 USD
Free Shipping
$ 137.99 USD
Free Shipping
This new Valvetronic variable valve timing actuator works by adjusting the eccentric shaft, increasing or decreasing valve lift and duration for optimal performance. If your actuator has failed, you will notice a significant power and performance decrease and an engine service light illuminated on the dash. Replace your with this quality URO replacement to restore performance and get your BMW back on the road! Features: Guaranteed fitment High-strength materials withstand engine heat and vibration Manufactured to OE dimensions for proper clearances and alignment Matches OE specifications for proper timing at all engine speeds 24-Month Unlimited Mileage Warranty
Show More Show Less


Fuel Pump
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:384686
Part#: 16146752368
Back Ordered
$ 128.99 USD
Free Shipping
$ 128.99 USD
Free Shipping
Does not include level sensor or sending unit.
URO Valve Cover Kit - E82 128i, E9X 328i, E60 528i, E70 X5 3.0si, E83...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! For 2007+ models with plastic valve cover
URO - Corporate Logo
T#:395230
Part#: 11127552281
Ships in 1 Business Day
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
All-in-one valve cover overhaul Preventative replacement saves time and trouble later on Includes new oil separator system Replace valve cover gaskets before a leak becomes worse Replace valve cover before it cracks For the 2007 model year BMW switched to a plastic valve cover on the N51 and N52 engines. As we have seen over time the plastic can crack which leads to oil leaks, vacuum leaks, poor running, and other issues. Unfortunately, it's not just the gasket that needs periodic replacement but the entire valve cover itself. This kit includes a new valve cover, gaskets, eccentric shaft seal, and hardware. The valve cover also incorporates the oil separator which is not a replaceable item on its own. So a complete valve cover replacement will tackle multiple problem areas at once. The valve cover is the same for N51 SULEV and N52 engines. Cracked Valve Cover. The plastic used for the N52 valve cover is thin and weak in certain spots. This makes it prone to hairline or larger cracks that will leak oil and cause vacuum leaks. You might also notice rough running, especially at idle. Often a technician will go looking for a failed ignition coil, spark plug, or failed vacuum hose on the engine. And without a fault code to assist in diagnosis this can often mean wasted time and money. A cracked valve cover is a new problem area that many techs don't think to check. Oil Separator/Crankcase Vent. BMW integrated the oil separator system into the valve cover on these later engines. An internal manifold creates a cyclone effect and centrifugal force separates vapor from the liquid oil. The liquid oil is supposed to drain through the valve cover and back to the oil pan while the remaining vapor is burned up during combustion. It's a very efficient and environmentally-friendly design with very few moving parts. Unfortunately it's not perfect and eventually the internal passageways will become clogged. This problem is made worse in cars that have short drive cycles, sit for long periods of time, do not have frequent oil changes, do not see regular runs to redline, and cars in freezing climates. If the engine never reaches optimal operating temp the oil remains in liquid form or becomes sludge. This is bad news for the entire engine, leading to fouled spark plugs, rough running and misfires and even premature failure of catalytic converters and oxygen sensors. Since the oil separator system in the valve cover is not available on its own, and cleaning it is nearly impossible, the complete replacement of the valve cover is the only option. Other oil vent tubes and vacuum hoses are also recommended to get replaced at the same time. Valve Cover Gaskets. As with any rubber part, failures occur when the rubber becomes dry and brittle. The pliable rubber no longer forms a seal between the cylinder head and valve cover where it will develop an oil leak. Valve cover gaskets that leak can allow oil to seep into the spark plug holes and contaminate ignition coil boots and plugs. That can lead to rough running and misfires. A new valve cover includes new gaskets. Eccentric Shaft Seal. The seal for the eccentric shaft sensor is a known spot for oil leaks. When the seal to the valve cover fails oil can end up in the sensor itself and ruin the sensor (an unecessary $300 expense). Usually a new seal (o-ring) will stop the leaks but sometimes the valve cover is at fault too. A new eccentric shaft seal is included. All new hardware is included to avoid re-using and over-tightening the original bolts (they have a very low torque rating). Replacement requires accessing the rear of the engine with a lot of the upper plastic shrouding removed. The vent hose on the valve cover should be replaced as it is almost always broken anyway (#11157559528). The metal fuel line must also be removed and disconnected from the fuel injectors. Professional installation is encouraged if you have never done this kind of work before. Serious DIY types should have a Bentley Service Manual to use which greatly explains the process. You may also want to combine this work with the oil filter housing gasket replacement. There is no maintenance or replacement interval for the N52 valve cover. However, we have seen cracks and other failures in the 50,000-90,000 mile range. Our best advice is to plan on a major top end overhaul around the 70-80,000 mile mark. There's no mechanical downside to replacing it as prevention and it will make the engine run better and last longer. This item fits the following BMWs: 2008-2012 E82 BMW 128i 2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan 2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon 2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe 2007-2013 E93 BMW 328i - Convertible 2008-2010 E60 BMW 528i 528xi 528i xDrive 2011 F10 BMW 528i 2007-2010 E83 BMW X3 3.0i X3 3.0si 2007-2008 E70 BMW X5 3.0si 2007-2008 E85 BMW Z4 3.0i Z4 3.0si 2009-2010 Z4 BMW Z4 sDrive30i
Show More Show Less
Advanced Auto Fabrication - Corporate Logo
T#:7608871
Part#: 116120
Ships in 2 Business Days
$ 195.99 USD
Free Shipping
$ 195.99 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. When you’re racing with an M54 and you want to control oil burn, installing an external catch tank is a great way to do it. The stock oil separator allows oil into the intake at sustained high RPM. This causes the intake runners, piping, and throttle body to be contaminated with oil and carbon build up. Excessive carbon build-up on valves, piston crowns, combustion chambers and spark plugs. This also increases the chance of detonation and power loss. Includes all hardware and parts to make installation easy!
Show More Show Less

Crankshaft Pulley
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:591616
Part#: 11281735358
Ships in 1 Business Day
$ 98.99 USD
Free Shipping
$ 98.99 USD
Free Shipping
Reduces vibrations and connects accessories

URO - Corporate Logo
T#:361970
Part#: 11141742042
In Stock
$ 72.75 USD
Free Shipping
$ 72.75 USD
Free Shipping

If your vehicle has started leaking coolant around the intake area and it is not the pipes, it is probably the valley pan.

This URO replacement has a high temperature and chemical resistant FKM Fluorocarbon Viton® rubber gasket to reduce the chance of leaks and increase the life of the gasket. This valley pan also features a gasket retention step to keep the gasket in place during installation and also reduce the chance of the gasket blowing out from pressure.

Show More Show Less
Uro Engine Oil Pan - E30 M20
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:6795787
Part#: 11131720754
In Stock
$ 308.99 USD
Free Shipping
$ 308.99 USD
Free Shipping
Manufactured to OE dimensions for proper clearance and fitment guaranteed. High-strength construction ensures a warp-free seal between oil pan and engine block with a durable surface coating.

Power Steering Pump Pulley
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:592383
Part#: 32421722555
Ships in 1 Business Day
$ 90.99 USD
Free Shipping
$ 90.99 USD
Free Shipping
Driven by serpentine accessory belt
Fuel Pump
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:373117
Part#: 16141182842
Ships in 1 Business Day
$ 116.99 USD
Free Shipping
$ 116.99 USD
Free Shipping
Includes O-Ring & fuel pump sending unit

VAC Motorsports - Corporate Logo
T#:1061441
Part#: ARP-HSK-N54
Ships in 7 Business Days
$ 554.99 USD
Free Shipping
$ 554.99 USD
Free Shipping
Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.
Show More Show Less

Valve Cover - Left
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:583194
Part#: 11127522159
Ships in 1 Business Day
$ 195.37 USD
Free Shipping
$ 195.37 USD
Free Shipping
Valve cover for N62 V8, left bank, Cylinders 5-8 Includes gaskets and bolts.
VAC Motorsports - Corporate Logo
T#:7164819
Part#: VAC-HPRBS-S54
Ships on Sep 1, 2026
$ 479.99 USD
Free Shipping
$ 479.99 USD
Free Shipping

BMW S54 VAC Performance Coated Rod Bearing Kit is highly regarded by BMW engine builders worldwide for its superior quality and performance. Ideal for both forced induction and naturally aspirated builds, these coated bearings are designed to be friction-resistant, reducing the risk of thermal breakdowns due to inadequate lubrication. This feature significantly decreases the chances of premature engine failure in street cars and minimizes the risk of spun bearings during high-stress track conditions.

The VAC Performance Coated Rod Bearing Kit is proven to help maintain engine reliability, even in situations with reduced oil pressure.

  • Enhanced Durability: Coated bearings are friction-resistant, reducing the risk of thermal breakdown.
  • Increased Reliability: Helps prevent premature engine failure and spun bearings under stress.
  • Versatile Performance: Suitable for both forced induction and naturally aspirated engine builds.
  • Proven Track Record: Tested by customers to ensure reliable performance even with oil pressure loss.

VAC Tech Notes:

  • Ensure proper tolerance and size checks before installation.
  • Professional installation is recommended due to specialized tools required.
  • Returns are not available on any engine bearings.
Show More Show Less
MINI N18 Engine Valve Cover With PCV
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:599579
Part#: 11127646552
In Stock
$ 195.45 USD
Free Shipping
$ 195.45 USD
Free Shipping

MINI N18 Engine Valve Cover With PCV addresses two common issues: check engine light codes and oily leaks from the top of the valve cover. This replacement valve cover features a black exterior without a front cover or MINI wings logo, effectively replacing damaged or cracked covers. It ensures that engine oil remains contained and prevents dirt from entering.

  • Dual Functionality: Resolves check engine light issues and prevents oil leaks from the valve cover.
  • Integrated PCV Valve: Helps prevent excessive oil consumption, carbon build-ups, and recurring check engine light problems.
  • Complete Kit: Includes valve cover gasket, spark plug tube seals, installation bolts, and oil cap with seal.
  • High-Quality Construction: An OES supplier part designed for reliable performance and a perfect fit.
Show More Show Less


URO Oxygen Sensor - Priced Each
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:8741231
Part#: 11787576673
In Stock
$ 104.63 USD
Free Shipping
$ 104.63 USD
Free Shipping
King - Corporate Logo
T#:10974874
Part#: CR4633SM
In Stock
$ 108.99 USD
Free Shipping
$ 108.99 USD
Free Shipping

Elevate your engine's performance to new heights with King SI-Series bearings, meticulously crafted to meet OE applications. Whether you're working on aftermarket gasoline or diesel engine rebuilding projects or enhancing the performance of engines equipped with OE crankshafts, these bearings are the perfect choice.

Key Features:

  • Enhanced Crankshaft Finish: The bearings feature an improved crankshaft finish to reduce microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts.
  • Optimized Oil Clearance: Experience reduced wear and extended engine life thanks to improved oil clearance, resulting in smoother engine operation.
  • Noise and Vibration Reduction: These bearings are designed to reduce operating noise and vibration, ensuring a quieter and more comfortable driving experience.
  • Efficient Oil Flow: Benefit from decreased excess oil flow, promoting efficient lubrication and reduced oil consumption.

Choose King SI-Series bearings for your engine and enjoy enhanced performance, increased longevity, and reduced noise and vibration. Upgrade your engine with confidence.

Show More Show Less
URO Oil Separator Valve - BMW E60 E90 Z4 N52
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:592960
Part#: 11617531423
In Stock
$ 57.12 USD
Free Shipping
$ 57.12 USD
Free Shipping
he crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate.
Show More Show Less

Engine Oil Pan - Lower
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:598884
Part#: 11131702891
In Stock
$ 91.99 USD
Free Shipping
$ 91.99 USD
Free Shipping

URO Fuel Pump Assembly - E46 Non-M
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:373294
Part#: 16146766942
In Stock
$ 115.99 USD
Free Shipping
$ 115.99 USD
Free Shipping

A failing fuel pump has many potential symptoms, including:

hard starting cold or after a heat soak
an illuminated check engine light
engine misfire under load or when cold
stalling
no-start.

Show More Show Less
Crankshaft Pulley With Vibration Damper
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:593668
Part#: 11237564969
Ships in 1 Business Day
$ 234.99 USD
Free Shipping
$ 234.99 USD
Free Shipping
Every time the cylinders fire, torque is transferred into the crankshaft. The crankshaft deflects under this torque, which sets up vibrations when the torque is released. At certain engine speeds the torque imparted by the cylinders are in synch with the vibrations in the crankshaft, which results in a phenomenon called resonance This resonance causes stress beyond what the crankshaft can withstand, resulting in crankshaft failure. The accessory pulley acts as a balancer and prevents these vibrations from destroying your crankshaft.
Show More Show Less

VAC Motorsports - Corporate Logo
T#:590352
Part#: VAC-HVOP-S54-N
Ships in 2 Business Days
$ 1,499.99 USD
Free Shipping
$ 1,499.99 USD
Free Shipping
This pump features two important upgrades: This pump is engineered with VAC's famous Oil Pump Upgrade kit integrated in its design; this means a stronger gear drive mechanism for much lower likelihood of pump failures on the track. VAC has not only improved the physical reliability of the pump itself but also fit a custom gear with a larger sweep area to the pump mechanism, increasing volume by a welcome 22% An excellent upgrade for Road Race, Autocross, Time Attack, Drift, Hill Climb, Rally, Drag Race, Roll Race & forced induction applications. Lubrication issues are a common killer of BMW engines. The dual-pickup pump is much better than a standard single pickup, but this pump is a dramatic improvement over both.
Show More Show Less
Valve Cover - Right
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:583193
Part#: 11127563474
In Stock
$ 202.28 USD
Free Shipping
$ 202.28 USD
Free Shipping
Valve cover for N62 V8, right bank, Cylinders 1-4 Includes gasket and bolts.

Secondary Air Injection Pump - E82 E88 E90 E92 E93
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:2824948
Part#: 11727557903
Ships in 1 Business Day
$ 350.99 USD
Free Shipping
$ 350.99 USD
Free Shipping
The secondary air injection pump injects fresh air into the exhaust stream to help burn off harmful pollutants in the catalytic converter. If the injection pump begins to fail, since it is a vital part of the emissions system, a fault code will be triggered. Sometimes, when pulling off the lower secondary air pipe, you may see water pour out. This is a sign that your pump is more than likely faulty. By simply replacing this pump, efficiency can be restored and there will be no worry about failing an emissions test.
Show More Show Less

URO Valvetronic Camshaft Adjusting Unit - BMW N62 4.4L 4.8L
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:8677206
Part#: 11377548389
Ships in 1 Business Day
$ 128.99 USD
Free Shipping
$ 128.99 USD
Free Shipping
This new Valvetronic variable valve timing actuator works by adjusting the eccentric shaft, increasing or decreasing valve lift and duration for optimal performance. If your actuator has failed, you will notice a significant power and performance decrease and an engine service light illuminated on the dash. Replace your with this quality URO replacement to restore performance and get your BMW back on the road! Features: Guaranteed fitment High-strength materials withstand engine heat and vibration Manufactured to OE dimensions for proper clearances and alignment Matches OE specifications for proper timing at all engine speeds 24-Month Unlimited Mileage Warranty
Show More Show Less
VAC Motorsports - Corporate Logo
T#:17538610
Part#: ARP-HSK-N54-14
In Stock
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.
Show More Show Less
VAC Motorsports - Corporate Logo
T#:583446
Part#: VAC-VH-S54
In Stock
$ 816.99 USD
Free Shipping
$ 816.99 USD
Free Shipping

VAC's S54 Vanos Hub is designed as a direct replacement for the fragile BMW OE Vanos Hub which typically fails due to a broken drive pin. The VAC Hub has an Upgraded Drive Pin design, which is larger in diameter, as well as more material on the outside wall of the pin. In addition, the hub is made from 4340HT Billet Bar and heat treated to the same BMW OE Rockwell Hardness spec. The upgraded design is not only significantly stronger, but the larger diameter Drive Pins also minimize the huge clearance (approximately 1mm) that was in the original design by BMW and reduces the clearance to 0.2mm. This is critical in helping greatly reduce or eliminate the VANOS noise.

Also, this upgraded design eliminates the need for modifying the Pump Ring or having to buy a replacement, which further saves you money!!!

Show More Show Less


Schrick - Corporate Logo
T#:3572
Part#: TMS3572
Ships on Dec 3, 2026
$ 1,775.98 USD
Free Shipping
$ 1,775.98 USD
Free Shipping
E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less
Schrick - Corporate Logo
T#:11749
Part#: TMS11749
Ships on Dec 3, 2026
$ 824.99 USD
Free Shipping
$ 824.99 USD
Free Shipping
E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Show More Show Less