This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
07-14-2026
This product was last offered at the strikethrough price on
07-14-2026
This product was last offered at the strikethrough price on
06-19-2026
Ensure proper sealing when installing the turbos on your N54.
Kit includes:
Helpful hints:
For complete installation instructions, refer to Haynes Service Manual (T#193950).
Both downpipes must be removed to remove either front or rear turbo. Tie rod end may need to be separated from knuckle for clearance. Steering rack may also need to be rotated away from subframe for access. Valve cover heat shield will need to loosened and pushed upward to get clearance for turbo manifold removal.
If studs back out of cylinder head and nuts are seized to studs, replace studs. Thread studs in to head by hand to prevent cross threading. When installing the new studs in the cylinder head, use a high temperature loctite in the cylinder head side, and copper anti-seize on the nut side.
To make more room for access to the front turbo, remove the rubber line running in front of the subframe that attaches to the back of the map thermostat and remove the clip. Cut off the OEM clamp and replace it with a new hose clamp as well.
Complete removal of the water pump is not required. Detach the water pump from the side of the block and push it out of the way to make more room for access to the front turbo. If water pump is unbolted from the block, the aluminum bolts must be replaced.
Torque specs:
Bracket to cylinder head: 9Nm
Coolant supply line to crankcase: 9Nm
Coolant return line to crankcase: 8Nm
Coolant return line to turbo: 8Nm
Coolant supply line to supply line: 8Nm
Exhaust manifold heat shield: 8Nm
Oil supply line to crankcase: 20Nm
Oil pressure line to turbo: 8Nm
Oil return line to crankcase: 8Nm
Oil return line to turbo: 8Nm
Turbo manifold to head: 20Nm
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
06-15-2026
This product was last offered at the strikethrough price on
06-15-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
03-26-2026
Oil Supply Hose by Rein is a crucial part of your BMW’s engine system, designed to provide reliable oil flow to ensure optimal engine performance and protection. This high-quality hose is engineered to withstand the extreme temperatures and pressure that come with high-performance driving. Available at Turner Motorsport, the Rein Oil Supply Hose is a direct-fit replacement that helps maintain proper engine lubrication and prevents potential wear and damage to critical components.
The Oil Supply Hose by Rein from Turner Motorsport is the ideal solution for keeping your BMW’s engine running smoothly, ensuring long-term reliability and performance.
This product was last offered at the strikethrough price on
03-06-2026
BMW N54 3.0L Turbo Oil Feed Line - Rear Turbo is essential for supplying oil to the rear turbocharger of the BMW N54 engine. This high-quality oil feed line ensures reliable oil delivery, crucial for the optimal performance of the turbocharger. Designed to replace old or leaking lines, it helps prevent oil leaks, which can lead to severe engine damage. Replacing a worn or leaking oil feed line is crucial for maintaining the integrity of the turbo system and avoiding costly repairs.
This product was last offered at the strikethrough price on
04-28-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Return Line Coolant Pipe MINI R56 is an essential component in the cooling system, connecting the thermostat to the turbo and the coolant expansion tank. This critical line ensures efficient coolant circulation, helping to maintain optimal engine temperatures.
This product was last offered at the strikethrough price on
04-29-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-19-2026
For those seeking a top-tier OE replacement upgrade turbo for their 1.6L car, the BorgWarner unit is the ultimate solution. It seamlessly replaces vehicles originally equipped with MINI Factory Borg Warner Turbochargers, offering an upgraded alternative for both the Cooper S and JCW models.
Keep in mind that the larger inlet necessitates an aftermarket intake system featuring a silicone hose or an aftermarket silicone intake hose to adapt to the larger inlet. Adjustments to factory inlet boots may be required for proper fitting.
With a piggyback tune, this turbo delivers power ranging from 225 to 255HP. With a more aggressive tune, you can push the limits up to 300HP. However, it's crucial to acquire a custom flash tune (not supplied) to prevent the turbo from backing off during full pulls.
Warranty claims for this turbo upgrade must be supported by a receipt from a professional repair facility, indicating the installation date and vehicle mileage. Additionally, a separate receipt from a professional repair facility should accompany the warranty claim, specifying the date and mileage of the turbocharger failure, reasons for the failure, and proposed repair solutions if necessary. Borg Warner will consider replacing a failed turbocharger due to material and workmanship defects, provided proper documentation is provided. Please note that all associated labor charges for diagnosis and repair are the responsibility of the vehicle owner.
This product was last offered at the strikethrough price on
07-28-2026
This product was last offered at the strikethrough price on
05-19-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
07-14-2026
This product was last offered at the strikethrough price on
07-14-2026
This product was last offered at the strikethrough price on
08-02-2026
This product was last offered at the strikethrough price on
08-02-2026
This product was last offered at the strikethrough price on
06-15-2026
This product was last offered at the strikethrough price on
06-15-2026
This part goes from the turbocharger to the electric water pump. The Rein - Turbocharger Coolant Return Line is a vital component designed to keep your BMW’s turbocharged engine running smoothly by preventing overheating. Specifically engineered to manage the extreme heat and pressure generated by the turbocharger system, this high-quality coolant return line ensures optimal coolant flow, safeguarding your engine from potential damage. Available at Turner Motorsport, this durable and reliable part is perfect for replacing or upgrading your BMW’s cooling system.
The Rein - Turbocharger Coolant Return Line from Turner Motorsport offers BMW owners the dependable cooling solution necessary to keep their turbocharged engines performing at their best.
Enhance your engine's performance with this all-in-one turbocharger assembly, featuring the waste gate actuator and an electric valve, complete with a gasket. This adaptable unit conveniently mounts to the front of the engine on the exhaust manifold, providing a seamless connection to the intake system.
Notably, this turbocharger is identified by two part numbers: 11657647003 and 11657600890, both of which correspond to the same top-tier product from Borg Warner, ensuring unmatched reliability and quality.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
04-28-2026
Rein Oil Supply Line is a critical component engineered to ensure your BMW’s engine receives the proper oil flow it needs for optimal performance. This high-quality oil supply line is designed to withstand the extreme heat and pressure generated by BMW engines, delivering consistent lubrication to essential engine parts. Available at Turner Motorsport, the Rein Oil Supply Line is a perfect replacement or upgrade for maintaining your engine's longevity and reliability.
The Rein Oil Supply Line from Turner Motorsport is the ideal solution to keep your BMW’s engine running smoothly, ensuring long-term reliability and enhanced performance.
This product was last offered at the strikethrough price on
06-10-2026
This product was last offered at the strikethrough price on
06-10-2026
