BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

• Holds a full 3-Liters (3.17 qts) of brake fluid
• Easy to read 0-30 lbs pressure gauge built into the tank top
• Pressure relief valve for safe release of pressure
• 40" hose with detachable swivel fitting

Note:

• Do not exceed 20 PSI
• LIFETIME REPLACEMENT

Includes:

• 3 Liter (3.17 qts) storage tank
• Pressure cap with 0-30 lb gauge and pressure relief valve
• 40" hose
• Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

• Recommend working at 10 PSI
• Dimensions for cap seal: 12x21x4 mm
• LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle.  The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system.  Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

• Holds brake calipers out of the way while working on brakes
• Also use to hang other automotive parts and tools while working on your vehicle.
• Stronger than zip ties or wire.
• Save the brake hose by not hanging caliper by hose.
• Made of  thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

JMTC Super S F56 Turbocharger for MINI

For MINI enthusiasts seeking a powerful upgrade, the JMTC Super S F56 turbocharger is engineered for both street and track performance. Designed with a 50mm compressor and a 9-blade high-flow turbine, this turbocharger offers rapid boost and significant power gains at higher RPMs. It maintains the quick response of the original turbo while delivering increased torque and horsepower.

Key Benefits:

• Billet Compressor: Ensures high durability and performance.
• High Flow 9-Blade Lightened Turbine: Provides quick spooling and efficient power delivery.
• High Strength Internals: Designed to withstand higher pressures.
• Upgraded 360-Degree Bearing: Enhances reliability and performance.
• High-Temperature Alloy Turbine Housing: Resists heat for consistent performance.
• Water-Cooled Bearing Housing: Improves cooling and longevity.
• Quick Spooling Dual Scrolling Housing: Reduces lag and enhances responsiveness.
• Power Increase: Up to 300 BHP for Cooper S and 320 BHP for JCW with supporting mods and ECU tuning.

Important Notes:

• The turbocharger does not include an electric actuator; use the one from your old turbo.
• For optimal results, consider refurbishing your OEM catalytic converter or using a high-flow downpipe. Installing a new oil line is also recommended to prevent future issues.
• Turbocharger rebuilds include a complete overhaul and replacement of any worn or damaged components, with a full warranty on rebuilt parts.

The JMTCs S45 F56 turbocharger was designed with the street and track enthusiast in mind. We started with our huge 50mm compressor and upgraded quick spool high flow turbine to give you full boost quick and a huge amount of power at the top end. We also designed it to maintain the quick response of the original turbo but deliver much more torque and power.

This turbocharger not only delivers high torque in the low to mid-range but you will also see a power increase at higher RPM. No torque or power loss like you see with the original small 43mm turbo. If you are looking for a great street, track, or strip upgrade that delivers full race performance this is the turbo for you. Don’t be left at the starting line by any other car and get one our S45 turbos today.

S45 Specs

• 50/67mm Billet High flow compressor
• Quick Spooling 45/40mm High Flow exhaust turbine
• High strength internals with 360deg bearing
• Designed for higher pressure and high temperature turbine housing
• Water cooled bearing housing and quick spooling dual scrolling housing
• New electronic wastegate actuator (new turbo only, DV/BOV not included)

Requirements

• 3" full exhaust (to increase life of the turbo and the engine)
• ECU tuning (to increase preset power due to ECU load limits) - Please contact JM Turbo Cooper for local and regional tuners that require a custom tune for it to perform. JM Turbo Cooper
• One step colder spark plugs
• New oil supply line (to increase life of the turbo)

For engine and turbocharger reliability reasons JMTC requires a 3" or larger exhaust (from turbo to exhaust tip, no exceptions). As well as installing a new oil line and one step colder spark plugs. Tuning is not required but will be will help the turbo and engine reach their full potential. Price Includes the core charge of $250 that will be refunded when a rebuttable core is returned to JMTC. Refurbished turbos do not come with a wastegate actuator or one that has not been tested.

MINI N14 JMTC MCS Refurbished Turbocharger is designed to enhance the performance of your MINI Cooper S with significant power and torque gains. This high-flow, twin-scrolling turbocharger features an extended tip compressor for early and sustained boost, making it ideal for enthusiasts seeking superior engine response and power across the entire RPM range.

• Enhanced Performance: Delivers outstanding torque and power throughout the RPM band.
• Early Spool: Boost starts early and continues into higher RPMs.
• Durable Design: Includes high-temperature alloy turbine housing and water-cooled bearing housing.
• Twin Scroll Turbo: Provides improved response and efficiency.
• Extended Tip Compressor Wheel: Optimizes airflow and performance.

Additional Information:

• Core Charge: Includes a $100 core charge, refundable upon return of the core turbo.
• Compatibility: Fits MCS OEM/Interchange models 53039880163, 53039880118, 53039700163, 53039880181, 53039700181, 53039880118, 53039700118, 53039710163; JCW OEM/Interchange 53039880146.
• Installation Recommendations: Consider installing a new oil supply line and a new or refurbished catalytic converter for optimal performance. A two-year warranty is extended when ordered together.
• Refurbishment Note: This part is refurbished and may have imperfections such as scratches or dents. For a flawless appearance, consider new parts instead.