Turbos

CTS Turbo Turbo Inlet Pipe - BMW F2X/F3X 230i/330i/430i B46/B48 ...

T#:50899212

Part#: HW-446

Ships on Nov 13, 2026

Sale - Save 15% $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 110.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 129.99

This product was last offered at the strikethrough price on
09-29-2026

$ 110.49 USD

Add to Wish List

Unlock maximum airflow and performance from your BMW’s B46/B48 with the CTS Turbo Cast Turbo Inlet Pipe. Designed as a direct replacement for the restrictive factory inlet, this upgrade dramatically improves airflow to the turbocharger, allowing your engine to breathe easier and perform at its full potential.

Show More Show Less

CTS Turbo Stage 2 Turbo Upgrade - E9x N54

T#:5788138

Part#: CTS-TR-0300

Ships in 6 Business Days

Sale - Save 10% $ 1,499.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,349.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,499.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,349.99 USD

Add to Wish List

If you looking to get the best daily-driven power and torque out of your N54, this is the kit for you! CTS Turbo is proud to announce their standard Stage 2 500 BMW N54 turbocharger kit. Using larger wheels than stock these turbos are good for 550-600hp, with a good low-end torque and excellent boost response, without sacrificing the top end. Features: 6-blade billet compressor wheel 9-blade turbine wheel Flow-optimized stainless steel exhaust manifold and housing Bolt-on fitment, compatible with any downpipes and charge pipes 2″ compressor covers (require aftermarket inlets) Installation kit included Tuning for Stage 2 turbos is required No core required, complete new units

Show More Show Less

MINI N14 N18 Turbo Heat Shield

T#:23615499

Part#: CTS-HS-160

Back Ordered

Sale - Save 15% $ 59.99

This product was last offered at the strikethrough price on
09-29-2026

$ 50.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 59.99

This product was last offered at the strikethrough price on
09-29-2026

$ 50.99 USD

Add to Wish List

Protect your Mini with the Turbo Heat Shield, an essential accessory to prevent hood paint discoloration, scoop warping, and underhood heat damage caused by excessive turbocharger heat. Additionally, it enhances the underhood appearance of your MINI. This metal plate mounts to factory points using supplied hardware, effectively reducing the amount of heat that bypasses the factory shield. While not encasing the turbocharger entirely, it serves as a secondary defense, complementing the factory-installed heat shield that isn't fully effective in preventing long-term hood paint and scoop damage.

Prevents hood paint discoloration and scoop warping
Guards against underhood heat damage caused by excessive turbocharger heat
Enhances underhood appearance
Mounts to factory points with supplied hardware
Acts as a secondary defense in addition to the factory heat shield

Show More Show Less

European Pressure Brake Bleeder & Catch Bottle With Caliper Hook Set,...

T#:34919051

Part#: 007237SCH01A2KT

Ships on Nov 30, 2026

Sale - Save 41% $ 161.99

This product was last offered at the strikethrough price on
05-03-2026

$ 95.26 USD

Add to Wish List

Qty

Sale - Save 41%

$ 161.99

This product was last offered at the strikethrough price on
05-03-2026

$ 95.26 USD

Add to Wish List

BRAKE BLEEDER:

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep the pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

Holds a full 3-Liters (3.17 qts) of brake fluid
Easy to read 0-30 lbs pressure gauge built into the tank top
Pressure relief valve for safe release of pressure
40" hose with detachable swivel fitting

Note:

Do not exceed 20 PSI
LIFETIME REPLACEMENT

Includes:

3 Liter (3.17 qts) storage tank
Pressure cap with 0-30 lb gauge and pressure relief valve
40" hose
Dual preventative fittings on the hose, featuring a chrome quick coupler on one end to snap onto the master cylinder cap and a detachable swivel fitting on the other end

Note:

Recommend working at 10 PSI
Dimensions for cap seal: 12x21x4 mm
LIFETIME REPLACEMENT

CATCH BOTTLE:

Keep your fluid's off the floor and into our catch bottle. The bottle has fluid level markings from 0.2L to 0.7 liter. This feature allows you to measure how much fluid you have sent thru the system. Our bleeder bottle features an expandable/collapsible top portion for easier storage. Gasket in cap prevents leakage. Tubing is extra long at 24" from cap to nipple. Flexible hose can be pushed down into bottle for storage when done. Bottle now features a handy hanger bracket to hang bottle from bottom of car.

CALIPER HOOK SET:

Tired of messing with bent coat hangers or bungee cords to hang your calipers up and out of the way when performing brake maintenance? These hooks make working on your brakes easier by letting you hang your calipers with ease, no more fighting with the bungee cords or zip ties to hold the caliper just right or having to make your own "custom" hooks with wire.

Holds brake calipers out of the way while working on brakes
Also use to hang other automotive parts and tools while working on your vehicle.
Stronger than zip ties or wire.
Save the brake hose by not hanging caliper by hose.
Made of thick steel for strength and durability. length is 8"

BILLET ALUMINUM CAP:

This aluminum cap with 90 degree swivel will work with our T#363245 Euro bleeder or our T#366970 3-Liter Multi-functional Fluid Pump Kit.

Features an all aluminum 45mm cap with quick coupler nipple.

BLEEDER WRENCH:

Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

CTS Turbo Stage 2+ Turbocharger Upgrade - S58

T#:27105124

Part#: CTS-TR-0058

Ships in 7 Business Days

Sale - Save 15% $ 3,899.99

This product was last offered at the strikethrough price on
09-29-2026

$ 3,314.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 3,899.99

This product was last offered at the strikethrough price on
09-29-2026

$ 3,314.99 USD

Add to Wish List

CTS Turbo is excited to introduce our latest Stage 2+ kit engineered specifically for the BMW S58 platform. Drawing upon our extensive expertise and successful track record in turbo projects, this advanced kit integrates cutting-edge technology to elevate performance while seamlessly preserving factory fitment. Through meticulous transient flow analysis and flow bench testing, our engineers have optimized the twin-scroll turbine housing to enhance performance without compromising stock fitment, location, or the utilization of stock wastegates. This allows for the compatibility with any stock-fitment downpipes, intakes, and charge pipes, resulting in an impressive power output ranging from 825whp to 900whp. Installation is straightforward, enabling the direct transfer of factory wastegates, high-performance downpipes, intake, and charge pipes, with no custom parts required. Moreover, all factory installation hardware and gaskets are retained. Gone are the days of dealing with cores; each turbocharger is delivered brand new, eliminating the inconvenience of core exchanges. Constructed with 316 stainless steel exhaust housings and wastegate components, our turbochargers are VSR balanced to exceed OE tolerances, incorporating upgraded heavy-duty bearings and thrust washers for enhanced durability. Designed to efficiently move significant air at lower boost levels, our turbochargers ensure potent power delivery without compromising reliability by risking turbo over-speeding. Enthusiasts seeking additional performance gains can seamlessly integrate larger turbo inlets with this setup. Key Features: - Brand new turbocharger, eliminating the need for core exchanges - Constructed with 316 stainless steel exhaust housings and wastegate components - VSR balanced to surpass OE tolerances - Includes wire-reinforced silicone turbo inlet - Compatible with factory installation hardware (not included) - Compatible with factory wastegate actuators (not included; original actuators can be used) Fitment: - G80 BMW M3/M3 Competition S58 - G82 BMW M4/M4 Competition S58 - G87 BMW M2 S58 - F97 BMW X3M/X3M Competition - F98 BMW X4M/X4M Competition

Show More Show Less

Genuine BMW Turbocharger Coolant Supply Line - Cylinders 1-4 - F15 F1...

T#:36052

Part#: 11537578687

Ships in 1 day

Sale - Save 42% $ 166.55

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 96.63 USD

Add to Wish List

Qty

Sale - Save 42%

$ 166.55

This product was last offered at the strikethrough price on
05-02-2026

$ 96.63 USD

Add to Wish List

Genuine BMW Hose, Inlet - Zyl. 1-4
This item fits the following BMW Chassis:
F01,F02,F06,F10,F12,F13

Fits BMW Engines including:
N63,N63N

Genuine BMW Turbo Water Return Line - Front Turbo - N54 3.0L ...

T#:36027

Part#: 11537558900

In Stock

Sale - Save 15% $ 121.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.25 USD

Add to Wish List

Qty

Sale - Save 15%

$ 121.47

This product was last offered at the strikethrough price on
05-14-2026

$ 103.25 USD

Add to Wish List

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW Pipe, Return, Cooling For Turbocharger - Zyl. 1-3
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

Genuine BMW Wastegate Valve Actuator

T#:210115

Part#: 11657850453

In Stock

Sale - Save 10% $ 723.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 654.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 10%

$ 723.99

This product was last offered at the strikethrough price on
08-13-2026

$ 654.99 USD

Limited Qty Sale

Add to Wish List

Enhance the performance of your BMW's turbocharged engine with the Genuine BMW Wastegate Valve Actuator . This crucial component efficiently controls the turbo boost pressure, optimizing engine efficiency and power delivery. Crafted to meet BMW's exact specifications, this actuator ensures a precise fit and dependable operation, restoring your vehicle's performance to its peak levels. Rely on Genuine BMW parts to uphold the integrity and efficiency of your vehicle's turbo system.

Show More Show Less

CTS Turbo F-Series N55 BOSS Turbo Upgrade Kit

T#:8138615

Part#: CTS-TR-1550-82

Ships in 7 Business Days

Sale - Save 10% $ 2,599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 2,339.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 2,339.99 USD

Add to Wish List

CTS is proud to announce the release of a premium ball-bearing turbo kit with stainless steel exhaust housing for the F2x and F3x BMW platforms equipped with N55 EWG engine. CTS utilized transient flow analysis backed by flow bench testing to optimize turbine housing for a GTX3582R while maintaining stock fitment, stock location, and using the stock waste gate (this is not a stock turbo with a bigger compressor wheel). This allows one to run any stock fitment exhaust downpipe, intake and charge pipe. The result is a factory-location big turbo that is capable of producing over 800hp with supporting mods. You can simply transfer your factory wastegate, your high performance downpipe, intake and charge pipe during the install. No custom parts are needed! Product Details: Complete brand new turbocharger; no need for core to be sent it or purchased GTX3582R-style Gen2 ceramic ball-bearing CHRA (dual ball-bearing) Billet 11 blade compressor wheel Proprietary stainless steel turbine housing, flow matched to the turbocharger VSR Balanced to exceed OE tolerances Oil and water fittings included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuator (not included, use your original wastegate actuator) **BIG TURBO SOFTWARE TUNING IS REQUIRED, FUELING UPGRADES ARE RECOMMENDED.

Show More Show Less

CTS Turbo Front Mount Race Intercooler Kit - F2X/F3X N20/N55 ...

T#:5802147

Part#: CTS-F20-F30-RACE

Ships in 6 Business Days

Sale - Save 25% $ 599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 449.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 599.99

This product was last offered at the strikethrough price on
09-29-2026

$ 449.99 USD

Add to Wish List

CTS Turbo is proud to announce their performance intercooler for N20 and N55 powered BMWs. This unique stepped-core design allows for maximum surface area, which optimizes cooling efficiency. Featuring a high-density core and cast aluminum end tanks, this intercooler is just what you need to keep your engine happy and add more power. If you’re interested in maintaining the sleeper look, rest assured this kit is a snap to install and no bumper trimming is required at all. Core size: 21.5' long x 3'/6' thick x 11'/6' tall, HP rating up to 800hp+

Show More Show Less

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE - Does not include BOV) ...

T#:23185032

Part#: CTSIT900

In Stock

Sale - Save 15% $ 189.99

This product was last offered at the strikethrough price on
09-29-2026

$ 161.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 189.99

This product was last offered at the strikethrough price on
09-29-2026

$ 161.49 USD

Add to Wish List

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE) is the ultimate upgrade for your BMW's N54 engine, designed specifically for use with the TiAL Q atmospheric blowoff valve. Offered by Turner Motorsport, this CTS Turbo BOV kit includes a 3" mandrel-bent T6 6061 aluminum pipe, finished in a durable black powder coat for long-lasting performance and sleek appearance. The kit ensures a secure fit with 4-ply silicone connectors and stainless steel clamps, providing an OEM-like fit with an aggressive aftermarket sound. Additionally, the pipe features two water-methanol bungs with 1/8" NPT plugs, a CNC machined MAP sensor flange, and a laser-etched CTS Turbo logo. Replace the weak plastic charge piping and failure-prone diverter valve system with this high-quality upgrade, enhancing your ability to hold boost under heavy loads while adding a distinctive sound to your BMW.

Designed for use with TiAL Q atmospheric blowoff valve
Durable 3" mandrel-bent T6 6061 aluminum pipe with black powder coat finish
CNC machined MAP sensor flange for seamless OEM installation
Includes 4-ply silicone connectors and stainless steel clamps for secure fit
Features two water-methanol bungs and laser-etched CTS Turbo logo
Enhances boost holding capacity and provides an aggressive aftermarket sound

Show More Show Less

CTS S55 Stage 2+ Turbo Upgrade - BMW F8X S55 3.0L

T#:20946760

Part#: CTS-TR-0055

Ships in 7 Business Days

Sale - Save 10% $ 3,199.00

This product was last offered at the strikethrough price on
09-29-2026

$ 2,879.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3,199.00

This product was last offered at the strikethrough price on
09-29-2026

$ 2,879.99 USD

Add to Wish List

CTS Turbo is excited to announce the release of our latest Stage 2+ aka the “RS” turbocharger set, designed specifically for the BMW S55 platform. This kit builds on the success and knowledge of the previous turbo projects we have made and incorporates new technology to optimize performance and maintain factory fitment. Our engineers utilized transient flow analysis and flow bench testing to optimize the twin-scroll turbine housing while maintaining stock fitment, stock location, and stock wastegates. This allows for the use of any stock fitment downpipes, intakes, and charge pipes. The result is an impressive 808whp on a built engine with supporting mods. You can simply transfer your factory wastegates, high-performance downpipes, intake, and charge pipes during the installation. No custom parts are needed and all factory installation hardware and gaskets are used! The kit features complete brand-new turbochargers and large inlet pipes. No need for cores to be sent in or purchased. Each turbocharger is VSR balanced to exceed OE tolerances with upgraded heavy-duty bearings and thrust washers. We supply reinforced silicone inlets, that are compatible with any intake system. These inlets will not collapse or deform under vacuum. Our turbochargers are designed to move a lot of air at lower boost levels, which means you can make some serious power without over-speeding the turbos, which means reliable performance. Optimal boost levels are 24-25psi with approximately 85-88% WGDC. This must be confirmed by your tuner and adjusted, depending on your build. Features: Complete brand new turbocharger; no need for core to be sent it or purchased Bolt-on journal bearing CHRA with HD bearings, turbine shaft diameter increased by 0.5mm and thrust surface increased by 2mm Billet 8 blade compressor wheel, 47.4mm inducer, 58mm exducer with 63.10mm extended tip design 9 blade Mar-M 246 Superalloy turbine wheel, 52mm inducer, 45.6mm exducer, high-flow 316 stainless steel exhaust housings and wastegate components VSR Balanced to exceed OE tolerances Wire-reinforced silicone turbo inlet included Compatible with factory installation hardware (not included) Compatible with factory wastegate actuators (not included, use your original wastegate actuators) Fitment: 2015 – 2020 BMW M3 and BMW M4 with S55 engine (F80, F82, F83) 2018 – 2021 BMW M2C and BMW M2CS with S55 engine (F87) NOTE: Installation and tuning must be performed by a qualified professional. Wastegate actuators MUST be calibrated using ISTA+ software before tuning.

Show More Show Less

CTS Turbo Stage 2+ Hybrid Turbo - BMW B58 Gen1

T#:46031873

Part#: TR-1057

Ships in 7 Business Days

Sale - Save 10% $ 2,099.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,889.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 2,099.99

This product was last offered at the strikethrough price on
09-29-2026

$ 1,889.99 USD

Add to Wish List

BMW B58 Gen1 hybrid turbo designed to deliver maximum performance while maintaining OEM fitment and reliability. Built for enthusiasts looking to extract more power from their B58, this hybrid turbo provides increased airflow and efficiency for higher horsepower and torque gains, supporting 700whp+ with the proper supporting modifications.

Show More Show Less

CTS TURBO Front Mount Intercooler Kit - F2X/F3X N20/N55

T#:587601

Part#: CTS-F20-F30-DF

Ships in 7 Business Days

Sale - Save 15% $ 449.99

This product was last offered at the strikethrough price on
09-29-2026

$ 382.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 449.99

This product was last offered at the strikethrough price on
09-29-2026

$ 382.49 USD

Add to Wish List

Step up to a more efficient intercooler that will provide better flow and less weight.

Genuine BMW Torx-countersunk Head Screw - 07129905261

T#:28871

Part#: 07129905261

In Stock

Sale - Save 26% $ 4.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3.68 USD

Add to Wish List

Qty

Sale - Save 26%

$ 4.99

This product was last offered at the strikethrough price on
05-02-2026

$ 3.68 USD

Add to Wish List

Genuine BMW Torx-Countersunk Head Screw -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Show More Show Less

N55 Charge Pipe - Stock DV

T#:23185030

Part#: CTSIT910

Ships in 7 Business Days

Sale - Save 15% $ 189.99

This product was last offered at the strikethrough price on
09-29-2026

$ 161.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 189.99

This product was last offered at the strikethrough price on
09-29-2026

$ 161.49 USD

Add to Wish List

The kit offers an OEM like fit, with an aggressive aftermarket sound.

Gasket Ring - Pack Of 20

T#:574559

Part#: 07119905041KT

In Stock

Sale - Save 5% $ 39.00

This product was last offered at the strikethrough price on
08-16-2026

$ 37.05 USD

Add to Wish List

Qty

Sale - Save 5%

$ 39.00

This product was last offered at the strikethrough price on
08-16-2026

$ 37.05 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

Sub-Categories

CTS Turbo Turbo Inlet Pipe - BMW F2X/F3X 230i/330i/430i B46/B48 ...

CTS Turbo Stage 2 Turbo Upgrade - E9x N54

MINI N14 N18 Turbo Heat Shield

European Pressure Brake Bleeder & Catch Bottle With Caliper Hook Set,...

CTS Turbo Stage 2+ Turbocharger Upgrade - S58

Genuine BMW Turbocharger Coolant Supply Line - Cylinders 1-4 - F15 F1...

Genuine BMW Turbo Water Return Line - Front Turbo - N54 3.0L ...

Genuine BMW Wastegate Valve Actuator

CTS Turbo F-Series N55 BOSS Turbo Upgrade Kit

CTS Turbo Front Mount Race Intercooler Kit - F2X/F3X N20/N55 ...

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE - Does not include BOV) ...

CTS S55 Stage 2+ Turbo Upgrade - BMW F8X S55 3.0L

CTS Turbo Stage 2+ Hybrid Turbo - BMW B58 Gen1

CTS TURBO Front Mount Intercooler Kit - F2X/F3X N20/N55

Genuine BMW Torx-countersunk Head Screw - 07129905261

N55 Charge Pipe - Stock DV

Gasket Ring - Pack Of 20

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results