Find Parts That Fit Your Vehicle

Home
Engine Parts
Fuel System

BMW Fuel System Parts

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

This category contains parts that fit the following chassis:

Sub-Categories

Sort By:

Spool FX-200 Upgraded High Pressure Pump + Fuel Line [B58]

T#:15976515

Part#: SP-FX-180-B58

Special Order: No Guaranteed ETA

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

NOTE: This kit includes the optional Stainless Steel High Pressure Fuel Line offered by Spool The FX-180 is an upgraded high-pressure fuel pump for the BMW B58 motor. The pump features a bigger bore size than stock that translates into roughly 80% more flow when compared to stock. The pump is completely E85 compatible and fully plug and play with no cutting or splicing of any kind required. The added flow will let you run much higher ethanol concentrations and also allow fueling for bigger turbos. Flow Rates based on B58 stock CAM lift: Stock B58 Pump - 0.954 cc per rev FX-180 - 1.7 cc per rev Why do you need it? The stock HPFP on B58 motor is severely limited in capacity when trying to tune and raise the output of the motor. The FX-180 adds 80% more flow to the equation, raising the fueling limits on the platform and helping you run bigger turbos and/or higher ethanol concentration blends. Are tune changes required? The upgraded pump does require calibration changes. It is important to apply these changes prior to starting the car with pump installed to avoid any possible damage and void of warranty. Spool Performance can provide calibration details to your existing tuner and/or help you connect with established tuners who are experienced with these pumps. Custom tuning is required to get maximum output out of the upgraded pump setup for your specific vehicle setup and ambient conditions. Spool Performance is a hardware manufacturer and does not provide custom tunes, but can assist with questions your tuner may have. Low Pressure Fuel Pump Upgrade: Proper low pressure fueling is extremely important for proper functioning and durability of the high pressure pumps and injectors in a DI system. Inadequate low pressure fueling can cause damage to the pump piston and bore as they are lubricated by controlled leakage of fuel. Resulting damage from low pressure starvation is detectable and would be cause for voided warranties. Please make sure you plan out your fuel system build with proper low pressure upgrades when necessary. NOTE: NOT COMPATIBLE WITH B58TU ENGINE

Show More Show Less

Spool Performance FX-350 Upgraded High Pressure Fuel Pumps [BMW S63 G...

T#:26271760

Part#: SP-S63-FX350-2

Special Order: No Guaranteed ETA

$ 4,499.00 USD

Add to Wish List

Qty

$ 4,499.00 USD

Add to Wish List

BMW Gen2 B58 FX-350 Upgraded High Pressure Pump With 10 Micro Filter ...

T#:35559422

Part#: SPB58FX350NEYF15

Special Order: No Guaranteed ETA

$ 2,348.00 USD

Add to Wish List

Qty

$ 2,348.00 USD

Add to Wish List

Spool Performance Gen2 S63 IFX350 Injectors - Set of 8

T#:29500088

Part#: SP-INJ-S63IFX350

Special Order: No Guaranteed ETA

$ 2,399.00 USD

Add to Wish List

Qty

$ 2,399.00 USD

Add to Wish List

Spool Performance introduces the IFX 350, an upgraded DI injector specifically designed for the Gen2 S63 platform. Engineered for enthusiasts who demand both power and OEM-level reliability, the IFX 350 injectors excel in maintaining smooth engine idle and low-load performance while providing unmatched power potential. Features:

Enhanced Flow Rate: Boosts fuel flow by 40% compared to stock injectors. Superior Fuel Delivery: Consistent performance at pressures up to 390 bar. Maintained OEM Functionality: Retains stock-like idle and low-load performance, ensuring full Bosch CVO correction capability. Backed by rigorous development and testing, the IFX 350 injectors are the ultimate solution for those aiming for four-digit horsepower figures while preserving engine reliability and smoothness.

Show More Show Less

Spool FX-200 BMW N20 N26 Upgraded High Pressure Pump

T#:37385971

Part#: SP-FX-200-N20-NE

Special Order: No Guaranteed ETA

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

Gas Tank - JL Germany

10X Entries Into Our F80 M3 Sweepstakes

T#:579860

Part#: 54245

Special Order: No Guaranteed ETA

Sale - Save 3% $ 468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 454.92 USD

Add to Wish List

Qty

Sale - Save 3%

$ 468.99

This product was last offered at the strikethrough price on
05-03-2026

$ 454.92 USD

Add to Wish List

Bav Auto Fuel Pressure Sensor - M57 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:639823

Part#: 13627792260

Special Order: No Guaranteed ETA

Sale - Save 10% $ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 44.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 49.99

This product was last offered at the strikethrough price on
05-03-2026

$ 44.99 USD

Add to Wish List

This sensor measures fuel pressure and is located on the intake manifold of your diesel BMW. If it has failed, replace it with this part to restore fuel system performance. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

PFS G8X Drop In Brushless LPFP Upgrade - 1000whp Capable

2X Entries Into Our F80 M3 Sweepstakes

T#:26938293

Part#: PFS-LPFP-G8X-NEW

Back Ordered

$ 1,763.99 USD

Add to Wish List

Qty

$ 1,763.99 USD

Add to Wish List

PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for G -Series S58. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand new PFS bucket

Show More Show Less

Upgraded Low Pressure Fuel Pump Assembly

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:14188788

Part#: R420-0002

Ships in 6 Business Days

Sale - Save 10% $ 1,449.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,304.96 USD

Add to Wish List

Qty

Sale - Save 10%

$ 1,449.99

This product was last offered at the strikethrough price on
09-28-2026

$ 1,304.96 USD

Add to Wish List

As power output increases, the demand for low-pressure fuel pumps increases. This kit includes components to upgrade your low-pressure fuel pump to deliver consistent fuel flow regardless of the amount of fuel inside the tank while increasing tank drawing. Best of all, the modified pump can be properly controlled by the DME and will result in no fault codes. Complete modified fuel pump Increases tank draw Consistent fuel flow Works seamlessly with existing DME For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four-year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

Show More Show Less

N55 Port Injection Kit With Intake Manifold, 950cc Injectors & Fuel L...

T#:42133542

Part#: BMW-N55-PRM-950

Back Ordered

$ 1,138.00 USD

Add to Wish List

Qty

$ 1,138.00 USD

Add to Wish List

Phoenix Racing N54 Port Injection Intake Manifold With 750cc Injector...

T#:44258354

Part#: BMW-N54PORT-750

Back Ordered

$ 988.00 USD

Add to Wish List

Qty

$ 988.00 USD

Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
Supports increased airflow to enhance engine power and efficiency
Integrated top-mount port injection bungs optimize fuel injector spray and delivery
Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
High-quality, high-temperature o-rings provide lasting durability and reliability
Exclusively available through Turner Motorsport, ensuring trusted quality and service

Show More Show Less

E9X/E8X Bucketed Fuel Pump Upgrade - Double Shot

T#:590134

Part#: E90BUCKETSTKDS

Back Ordered

$ 699.00 USD

Add to Wish List

Qty

$ 699.00 USD

Add to Wish List

Nostrum Flex Fuel Sensor Kit - F Chassis

T#:9674477

Part#: L081-1109

Back Ordered

$ 267.00 USD

Add to Wish List

Qty

$ 267.00 USD

Add to Wish List

The sensor reads the percentage of ethanol coming from your fuel tank and reports it to the content analyzer of your choice. The kit includes a sensor pre-mounted on a bracket designed to fit your vehicle, as well as adapter lines to adapt the sensor to the factory fuel lines.

Show More Show Less

1
…
9
10

Select Vehicle

Category

Fuel System

Brand

View All Brands

Price

Special Offers

Shipping

Purpose