Find Parts That Fit Your Vehicle

BMW Fuel System Parts

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

O-Ring 2,8x1,5 FPM SH70
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:15081503
Part#: 13537794553
In Stock
$ 2.99 USD
Free Shipping on orders $49 and up
Replace your Injector o-rings whenever you change your injectors!
In-Line Fuel Filter
5X Entries Into Our F80 M3 Sweepstakes
Meyle - Corporate Logo
T#:54959299
Part#: 314 323 0011
In Stock
New Item
$ 33.99 USD
Free Shipping on orders $49 and up
This Meyle fuel filter is a high-quality replacement option built to precise specifications, ensuring your fuel system receives clean, unrestricted fuel flow.
Bosch - Corporate Logo
T#:20946736
Part#: 13532247156
In Stock
$ 3.99 USD
Free Shipping on orders $49 and up
Located between the base of the fuel injector and the cylinder head - one required per injector

Dorch Engineering - Corporate Logo
T#:55533487
Part#: DE-582-25TS
In Stock
New Item
$ 1,999.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 B58 Gen2 HPFP Upgrade provides the necessary high volume fueling required for high-horsepower builds and heavy ethanol scaling. This next-generation pump operates at a massive 350 bar, bringing unprecedented volumetric efficiency
Show More Show Less

Fuel Injector Gasket Ring - BMW N47, N57, M57, B57
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:17871160
Part#: 13532247156
Ships on Dec 2, 2026
$ 0.99 USD
Free Shipping on orders $49 and up
Seals the fuel injector to the engine
Pro-Line Injector And Glow Plug Grease - 20g
10X Entries Into Our F80 M3 Sweepstakes
Liqui-Moly - Corporate Logo
T#:49787695
Part#: 22243
In Stock
$ 6.99 USD
Free Shipping on orders $49 and up
This high-performance lubricant is formulated to prevent moisture ingress and oxidation, which are the primary causes of "frozen" injectors and glow plugs.

Dorch Engineering - Corporate Logo
T#:55713497
Part#: DE-581-ECA-14
In Stock
New Item
$ 549.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58
Dorch Engineering - Corporate Logo
T#:55713511
Part#: DE-582-ECA-242
In Stock
New Item
$ 549.00 USD
Free Shipping on orders $49 and up
$ 549.00 USD
Free Shipping on orders $49 and up
This hardware package gives your BMW powerplant the ability to scale output dynamically based on your exact ethanol blend. No more draining the tank or flashing different maps at the gas station

Dorch Engineering - Corporate Logo
T#:55461364
Part#: DE-581-25B
In Stock
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55533509
Part#: DE-581-30A
In Stock
New Item
$ 2,399.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS3 B58 Gen 1 HPFP Upgrade is the ultimate solution for drivers looking to lift the fueling restrictions on their B58 powerplant. Optimized for high-output setups, this upgraded pump ensures your injectors are supplied with the precise volume
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55461363
Part#: DE-581-25A
Ships in 4 Business Days
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less
Fuel Pump Lock Ring
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:8741229
Part#: 16117188565
In Stock
$ 18.19 USD
Free Shipping on orders $49 and up
$ 18.19 USD
Free Shipping on orders $49 and up


Fuel-It! - Corporate Logo
T#:26038542
Part#: BMW-EPI-950
Ships on Oct 15, 2026
$ 1,188.00 USD
Free Shipping on orders $49 and up

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less
Fuel-It! - Corporate Logo
T#:38890887
Part#: BMS-PIK-B58
Ships on Oct 15, 2026
$ 699.00 USD
Free Shipping on orders $49 and up
The Fuel-It! Port Injection Manifold Spacers are precisely CNC-machined for a seamless, factory-like fit and anodized black for enhanced durability and a sleek appearance. This port injection kit includes all necessary installation hardware, heavy-duty gaskets, and a plug-and-play BMS braided fuel line adapter. To complete the kit, you'll need the Fuel Line, Fuel Injectors, and a Port Injection Controller, which are available separately or can be added to your package. An aftermarket charge pipe is required to accommodate the additional height of the manifold. For Gen 1 B58, we recommend the BMS Elite Aluminum Replacement Charge Pipe Upgrade, while for Gen 2 B58, options include the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe Blow-Off Valve (BOV) Kit or the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe.
Show More Show Less
Hamburg Tech - Corporate Logo
T#:46719146
Part#: 16117373458
Ships in 1 Business Day
$ 165.00 USD
Free Shipping on orders $49 and up

Dorch Engineering - Corporate Logo
T#:55533507
Part#: DE-55-25B
Ships in 4 Business Days
New Item
$ 1,699.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55713498
Part#: DE-581-ECA-14TU
Ships in 4 Business Days
New Item
$ 549.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58
Rein Fuel Hose Assembly - BMW E60/61 5
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:49404666
Part#: 13537537964
Back Ordered
$ 64.99

This product was last offered at the strikethrough price on
04-28-2026

$ 63.99 USD
Free Shipping on orders $49 and up
$ 63.99 USD
Free Shipping on orders $49 and up
Replace damaged or cracked fuel hose assembly with this option from Rein

Decoupling Element - Each
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:27105152
Part#: 13537577649
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up

Decoupling Element - Each is a crucial component for BMW vehicles, specifically designed to ensure optimal injector installation. This high-quality metal ring is positioned at the end of the fuel injector, playing a vital role in maintaining proper alignment and function.

Features and Benefits:

  • Essential Component: Integral for correct injector installation and operation.
  • High-Quality Construction: Made from durable metal to withstand the rigors of engine performance.
  • Precision Fitment: Ensures proper alignment of the fuel injector, enhancing engine efficiency.
  • Easy Installation: Designed for straightforward installation without the need for modifications.
  • Compatibility: Suitable for a range of BMW models, ensuring versatile use.
Show More Show Less
URO - Corporate Logo
T#:4799678
Part#: 16117162168
Ships in 1 Business Day
$ 13.99 USD
Free Shipping on orders $49 and up
$ 13.99 USD
Free Shipping on orders $49 and up
This screw ring tightens down to hold the top of the fuel pump and can be easily damaged if not removed with the proper tools. Replace yours to ensure your fuel pump is securely mounted and sealed to the fuel tank.
Show More Show Less

AUTOTECKNIC - Corporate Logo
T#:21045518
Part#: ATK-BM-0006-BC
Ships in 7 Business Days
$ 65.00 USD
Free Shipping on orders $49 and up
Do you ever go to fill up your car and look at your gas cap and feel like something is missing? Well here you are, the AUTOTACKNIC dry carbon fuel filler cap is here is here to give your old filler cap some high quality personality! Crack a smile every time you open your gas cap!
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38890918
Part#: BMSS3BLPFPN5455
Ships on Oct 15, 2026
$ 399.99 USD
Free Shipping on orders $49 and up
If you're already using our Stage 2 Bucketless LPFP and want to upgrade to Stage 3, this kit is for you. If you don’t have the Stage 2 kit, you can purchase it here. Note: Stage 3 requires the Stage 2 bucketless kit. The Stage 3 upgrade kit includes: - Complete plug-and-play solution with the addition of the secondary module - Custom billet aluminum fitting to run both pumps in parallel - Wiring harness for the secondary pump - Spare vent tube clip - New Walbro filter - New E85-compatible Walbro 450 pump (F90000274) - Optional upgrade to Walbro 525 pump (F90000285) Recommended accessories: - Lock Ring Removal Tool - Hobb's switch
Show More Show Less
Victor Reinz - Corporate Logo
T#:379124
Part#: 13531720252
Ships in 1 Business Day
$ 5.82

This product was last offered at the strikethrough price on
08-24-2026

$ 4.89 USD
Free Shipping on orders $49 and up
$ 4.89 USD
Free Shipping on orders $49 and up
5x1.5mm
Bosch - Corporate Logo
T#:33512942
Part#: 13538571795KT
In Stock at Vendor
$ 5,259.99

This product was last offered at the strikethrough price on
05-07-2026

$ 3,841.99 USD
Free Shipping on orders $49 and up
$ 3,841.99 USD
Free Shipping on orders $49 and up
The factory fuel injectors in the N57 diesel engines are generally reliable, but they can still encounter the typical issues faced by direct injection systems. A common problem is carbon buildup on the injector tip, which can lead to poor spray patterns, resulting in inadequate fuel atomization. This causes reduced engine power or rough idling due to improper fuel ignition. Similar issues can arise from clogged injectors caused by contaminated fuel or internal injector failure. If your diesel engine is experiencing rough idling, reduced power, or poor fuel efficiency, this replacement injector set featuring Bosch injectors is an ideal solution to resolve these issues and restore proper engine performance. Each Bosch injector comes with preinstalled sealing washers and o-rings, making them ready for immediate installation.
Show More Show Less


Race German - Corporate Logo
T#:7703243
Part#: RGIJT0L
Ships in 2 Business Days
$ 17.99 USD
Free Shipping on orders $49 and up
Race German has devoted themselves to providing quality products for late model BMWs that cover both street and track applications. Race German has now grown their catalog to a wide variety of models and products geared towards keeping your car looking and running nice. Race German's BMW fuel injector rebuild kit is one of their best selling products. To make things easier, they are now offering this little tool to help you remove the small micro filters out of the end of the Bosch fuel injectors. This simple tool threads into the end of the injector, and once engaged you simply wiggle and pull, and the micro filter comes out. *Note: This tool is included with many of the Race German Injector rebuild kits
Show More Show Less
Fuel-It! - Corporate Logo
T#:25839000
Part#: BMW-N54-PRM-750
Ships on Oct 15, 2026
$ 988.00 USD
Free Shipping on orders $49 and up
Fuel Filter/Fuel Pressure Regulator Gasket
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:591937
Part#: 16116765055
Ships in 1 Business Day
$ 17.99

This product was last offered at the strikethrough price on
08-13-2026

$ 15.99 USD
Free Shipping on orders $49 and up
$ 15.99 USD
Free Shipping on orders $49 and up
Stop fuel leaks with a replacement seal

URO Breather Hose - E36, Z3
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592992
Part#: 13411247782
Back Ordered
$ 7.99 USD
Free Shipping on orders $49 and up
Used in the air intake system

Bosch - Corporate Logo
T#:595038
Part#: 13647629174
Ships in 1 Business Day
$ 118.99

This product was last offered at the strikethrough price on
05-07-2026

$ 114.99 USD
Free Shipping on orders $49 and up
$ 114.99 USD
Free Shipping on orders $49 and up


Bosch BMW Injector -
This item fits the following BMW Chassis:
F30

Fits BMW Engines including:
N26

Bosch - Corporate Logo
T#:591890
Part#: 13537591006
Ships in 1 Business Day
$ 4.99

This product was last offered at the strikethrough price on
09-03-2026

$ 4.07 USD
Free Shipping on orders $49 and up
$ 4.07 USD
Free Shipping on orders $49 and up
Seal that goes from the end of the injector to the motor

Bosch - Corporate Logo
T#:6924277
Part#: 06A906031BC
Ships in 1 Business Day
$ 69.99

This product was last offered at the strikethrough price on
07-23-2026

$ 49.99 USD
Free Shipping on orders $49 and up
$ 49.99 USD
Free Shipping on orders $49 and up

DeatschWerks Performance Fuel Injector Set - 600cc
For Custom Applications - Will require additional tuning or modifications.
DeatschWerks - Corporate Logo
T#:6151337
Part#: 17MX-00-0600-8
In Stock at Vendor
$ 829.00 USD
Free Shipping on orders $49 and up
If you are pushing the limits of your naturally aspirated build or stepping into a moderate forced induction setup, the DeatschWerks 17MX-00-0600-8 fuel injector kit provides the reliability you need.

Dorch Engineering - Corporate Logo
T#:55533499
Part#: DE-55-25A
Ships in 1 Business Day
New Item
$ 1,699.00 USD
Free Shipping on orders $49 and up
$ 1,699.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55461367
Part#: DE-55-15A
Ships in 4 Business Days
New Item
$ 1,149.00 USD
Free Shipping on orders $49 and up
$ 1,149.00 USD
Free Shipping on orders $49 and up
Eliminate the fueling limits and maintain factory-level reliability with the Dorch Engineering DS15 HPFP Upgrade. This "Stage 1.5" pump replaces the successful DS1, engineered specifically to handle the flow demands of aggressive tuning
Show More Show Less
Fuel-It! - Corporate Logo
T#:21209854
Part#: FFK-B464858
Ships on Oct 15, 2026
Starting at $ 479.99 USD
Free Shipping on orders $49 and up
Starting at $ 479.99 USD
Free Shipping on orders $49 and up
If you're running E85 or ethanol mixes in your BMW, you need this kit! As many of you know the BMW motors can be very picky about how much ethanol you run to achieve peak performance but not run lean. Consequently, BMS have put together a kit enabling you to easily install an ethanol sensor with no permanent modifications needed. You will simply remove your low pressure fuel line in the engine bay and plug in our kit. It's a complete plug and play solution that utilizes our Bluetooth app to monitor your ethanol content. When you are ready to return to stock, you will simply remove the kit and re-install the stock fuel line. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration One wiring harness with Posi-tap connector Bluetooth Model Supports stand-alone Bluetooth operation with the Fuel-It! app *For the JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less


Fuel pump and level sensor kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56471664
Part#: 16116768788KT2
Ships in 1 Business Day
New Item
Sale - Save 3% $ 681.99

This product was last offered at the strikethrough price on
09-04-2026

$ 664.00 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 681.99

This product was last offered at the strikethrough price on
09-04-2026

$ 664.00 USD
Free Shipping on orders $49 and up
This targeted refresh package to completely restore your E46’s fuel tank module. Built around a high grade Continental fuel pump assembly this kit ensures maximum fuel flow stability, precise fuel gauge readings, and a leak free installation.
Show More Show Less
Bosch - Corporate Logo
T#:592027
Part#: 13537573801
Ships in 1 Business Day
$ 35.50

This product was last offered at the strikethrough price on
04-09-2026

$ 34.56 USD
Free Shipping on orders $49 and up
$ 34.56 USD
Free Shipping on orders $49 and up

PFS Port Injection Kit - B58
2X Entries Into Our F80 M3 Sweepstakes
Aftermarket charge pipe required
Vargas Turbo Technologies - Corporate Logo
T#:5663657
Part#: PFS-B58-PI
Ships in 10 Business Days
Starting at $ 733.99 USD
Free Shipping on orders $49 and up
Starting at $ 733.99 USD
Free Shipping on orders $49 and up
The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

Rein - Corporate Logo
T#:362382
Part#: 13641730767
In Stock at Vendor
$ 6.17 USD
Free Shipping on orders $49 and up
Located on nozzle end of injector
URO Fuel Tank Level Sending Unit - BMW E39
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:18468301
Part#: 16141183179
In Stock
$ 131.99 USD
Free Shipping on orders $49 and up

URO Fuel Tank Sending Unit - BMW E39

The URO Fuel Tank Sending Unit - BMW E39 is an essential replacement part for ensuring accurate fuel level readings in your BMW. This high-quality fuel tank sending unit is designed to fit perfectly within the fuel system of the BMW E39, providing reliable performance and preventing any fuel gauge issues. Whether replacing a faulty unit or upgrading an older one, the URO Fuel Tank Sending Unit ensures that your fuel gauge operates accurately and efficiently.

  • Designed for a perfect fit in the BMW E39 fuel system
  • High-quality construction ensures reliable fuel level readings
  • Helps prevent fuel gauge malfunctions and inaccuracies
  • Easy to install with OE-quality design for a hassle-free replacement
  • Durable materials withstand the demands of long-term fuel system use
Show More Show Less

E89 Silent Fan EKP PNP Cooler Kit - 40mm Noctua Fan
A Must For Cars With Upgraded LPFPs
Arc Terminator - Corporate Logo
T#:26471534
Part#: SILENT-E89-EKP
Ships in 1 Business Day
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
Starting at $ 59.99 USD
Free Shipping on orders $49 and up
The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E82 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8, which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket in order to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable ASA, ABS or PETG, depending on the color choice. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With a Genuine 60mm or 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a silent Noctua fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.
Show More Show Less
Fuel-It! - Corporate Logo
T#:21275568
Part#: FFK-G29Z4-CK
Ships on Oct 15, 2026
$ 479.99 USD
Free Shipping on orders $49 and up
If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your B58 powered G29 Z4. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For the G29 Z4 JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less

Fuel Pressure Regulator Vacuum Hose - 13537560069
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:26171672
Part#: 13537560069
Ships in 1 Business Day
$ 19.99

This product was last offered at the strikethrough price on
08-31-2026

$ 16.99 USD
Free Shipping on orders $49 and up
$ 16.99 USD
Free Shipping on orders $49 and up

Ensure optimal engine performance in your BMW with this vacuum hose from URO Parts. Designed to provide vacuum to the fuel pressure regulator, this hose plays a crucial role in preventing engine performance issues. Cracks, tears, or splits in the rubber hose can result in lean codes and misfires, necessitating immediate repair.

  • Provides vacuum to the fuel pressure regulator
  • Prevents engine performance issues
  • Cost-effective solution
  • High-quality construction by URO Parts
Show More Show Less

Bosch - Corporate Logo
T#:54388518
Part#: 16117300477
Ships in 1 Business Day
New Item
$ 354.99

This product was last offered at the strikethrough price on
06-15-2026

$ 350.99 USD
Free Shipping on orders $49 and up
$ 350.99 USD
Free Shipping on orders $49 and up
On the street or at the track, volume and pressure are everything when it comes to fuel. A degrading fuel pump doesn't just rob your BMW of horsepower—it risks dangerous lean conditions when you're pushing the engine to its limits. When it’s time to replace a soft or failing pump, don't gamble on no-name budget brands. Go back to the source with this high-quality Bosch replacement fuel pump.
Show More Show Less
DeatschWerks - Corporate Logo
T#:53820907
Part#: 16M-30-1500-6
In Stock at Vendor
New Item
$ 1,259.00 USD
Free Shipping on orders $49 and up
If you are pushing the limits of your naturally aspirated build, the DeatschWerks fuel injector kit provides the reliability you need.
DeatschWerks - Corporate Logo
T#:47953868
Part#: 17MX-00-1100-8
In Stock at Vendor
$ 989.00 USD
Free Shipping on orders $49 and up
For enthusiasts looking to push their BMW to the limit, the DeatschWerks fuel injector set offers a professional-grade solution for fuel management.


Fuel-It! - Corporate Logo
T#:16840517
Part#: FFKS63TUFXM
Ships on Oct 15, 2026
$ 479.99 USD
Free Shipping on orders $49 and up
Know your exact ethanol content in real-time via the Fuel-it! or JB4 app on your smartphone or tablet. The kit includes the following: Genuine Continental® ethanol sensor Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration Fuel-It! Bluetooth analyzer (iPhone or Android app must be purchased to use this kit) Plug and play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tuning Bluetooth (iPhone or Android app must be downloaded to use this feature) *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI page bit 1 to enable. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less
URO Fuel Tank Breather Valve
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:38094303
Part#: 13907619297
Ships in 1 Business Day
$ 94.99 USD
Free Shipping on orders $49 and up
The URO fuel tank breather valve helps your vehicle remain environmentally compliant by minimizing excess emissions. It is ideal for those experiencing EVAP system errors or fuel delivery issues.
Show More Show Less