Find Parts That Fit Your Vehicle

BMW Fuel System Parts

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

VTT N54 Vacuum Pump Block Off Plate

T#:11497328

Part#: VTT-N54-VACUUM-B

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit

T#:11497326

Part#: VTT-N54-DI-DELET

Ships in 1 Business Day

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

Walbro Ultra High-Performance Fuel Pump - (Universal E85 Ethanol) - T...

T#:23020149

Part#: F90000295

In Stock at Vendor

$ 203.99 USD

Add to Wish List

Qty

$ 203.99 USD

Add to Wish List

New DCSS 39/50 High-Performance Pump – F90000295

Highest flow in-tank brushed fuel pump offering from TI Automotive / Walbro
No Internal check valve - ideal for racing applications to build oil pressure prior to start-up
Featuring award-winning DCSS technology
E85 compatible
High-pressure relief setting - supports supercharger and turbo applications
Capable of supporting 900+HP at 60PSI naturally aspirated applications
Complete Pump and kit combination – TCD495

Fuel: GAS & E85

Horsepower: 900+ at 60PSI, naturally aspirated applications

Over All Pump Length: 131mm

Main Housing Diameter: 39mm

Lower Housing Diameter: 50mm

Fuel Inlet Diameter: 11mm OD

Fuel Outlet Diameter: 11mm OD

Flow Rate: 535LPH at 40psi

Test Voltage: 13.5 Volts

Show More Show Less

Walbro High Flow Fuel Pump - 255 LPH

T#:371990

Part#: PMPWINLINE

In Stock

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

The Walbro 255 is often a choice for N54 and N55 owners when the factory high flow fuel pump is not satisfactory.

Note that this fuel pump will require some additional wiring to work in your particular vehicle.

Show More Show Less

Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58...

T#:51778123

Part#: VTT-S58-SINGLE-H

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.

PFS F97/F98 Drop In Brushless LPFP Upgrade - 1000whp Capable ...

T#:26938343

Part#: PFS-LPFP-X3/4M-N

In Stock

$ 1,763.99

This product was last offered at the strikethrough price on
07-21-2026

$ 1,637.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,763.99

This product was last offered at the strikethrough price on
07-21-2026

$ 1,637.99 USD

Limited Qty Sale

Add to Wish List

PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand-new PFS bucket

Show More Show Less

PFS Port Injection Kit - B58

Aftermarket charge pipe required

T#:5663657

Part#: PFS-B58-PI

Ships in 10 Business Days

Starting at $ 733.99 USD

Add to Wish List

Starting at $ 733.99 USD

Add to Wish List

The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

AUTOTECKNIC Dry Carbon Competition Fuel Cap Cover

T#:21045518

Part#: ATK-BM-0006-BC

Ships in 7 Business Days

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

Do you ever go to fill up your car and look at your gas cap and feel like something is missing? Well here you are, the AUTOTACKNIC dry carbon fuel filler cap is here is here to give your old filler cap some high quality personality! Crack a smile every time you open your gas cap!

Show More Show Less

Vargas Shotgun Single Barrel - MT - BMW E9X, E8X N54

T#:52305464

Part#: STGN-SB-1-N54-MT

Ships in 10 Business Days

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

The VTT Single Barrel for Manual Transmissions is the "Stage 1" of the Shotgun family, providing a massive headroom increase over the stock setup.

Vargas Port Injection Block Off Injector Blanks With Rail - BMW G8X F...

T#:52164930

Part#: S58PIBLORAIL

Ships in 10 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Maximize the versatility of your BMW S58 fuel system with the Vargas Turbo Technologies Port Injection Block Off Kit with Rail.

PFS Port Injection Kit - BMW G8X/F9X S58

T#:52164908

Part#: PFS-S58-PI-NONE

Ships in 10 Business Days

$ 949.99 USD

Add to Wish List

Qty

$ 949.99 USD

Add to Wish List

The PFS S58 Port Injection Kit by Vargas Turbo Technologies is the solution for BMW owners who have reached the limits of their factory injection.

Vargas Port Injector Block Off Blanks - BMW G8X F9X S58

T#:52164927

Part#: S58PIBLOBLANKS

Ships in 10 Business Days

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

The PFS S58 Port Injection Block-Off Kit offers a robust and reliable way to seal secondary fuel ports in the S58 intake manifold.

Vargas HPFP Block-Off Plate - BMW B58 & S58

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

Pump Filter Sock

T#:38128034

Part#: 125-190

Ships in 8 Business Days

$ 15.99 USD

Add to Wish List

Qty

$ 15.99 USD

Add to Wish List

Perfect for vehicle owners looking to maintain their vehicle’s fuel system integrity, this Walbro Pump Filter Sock replacement is a reliable upgrade for optimal driving performance.

PFS G8X Drop In Brushless LPFP Upgrade - 1000whp Capable

T#:26938293

Part#: PFS-LPFP-G8X-NEW

Back Ordered

$ 1,763.99 USD

Add to Wish List

Qty

$ 1,763.99 USD

Add to Wish List

PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for G -Series S58. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand new PFS bucket

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts

Sub-Categories

VTT N54 Vacuum Pump Block Off Plate

VTT BMW N54 “DI Injector” Delete Kit

Walbro Ultra High-Performance Fuel Pump - (Universal E85 Ethanol) - T...

New DCSS 39/50 High-Performance Pump – F90000295

Walbro High Flow Fuel Pump - 255 LPH

Vargas Plug And Play S58 Single HPFP Conversion Kit - BMW G8X/F9X S58...

PFS F97/F98 Drop In Brushless LPFP Upgrade - 1000whp Capable ...

PFS Port Injection Kit - B58

AUTOTECKNIC Dry Carbon Competition Fuel Cap Cover

Vargas Shotgun Single Barrel - MT - BMW E9X, E8X N54

Vargas Port Injection Block Off Injector Blanks With Rail - BMW G8X F...

PFS Port Injection Kit - BMW G8X/F9X S58

Vargas Port Injector Block Off Blanks - BMW G8X F9X S58

Vargas HPFP Block-Off Plate - BMW B58 & S58

Pump Filter Sock

PFS G8X Drop In Brushless LPFP Upgrade - 1000whp Capable

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results