Find Parts That Fit Your Vehicle

BMW Fuel System Parts

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

VTT N54 Vacuum Pump Block Off Plate

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:11497328

Part#: VTT-N54-VACUUM-B

Ships in 1 Business Day

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:11497326

Part#: VTT-N54-DI-DELET

Ships in 1 Business Day

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

Vargas Turbo Technologies Plug And Play S58 Single HPFP Conversion Ki...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:51778123

Part#: VTT-S58-SINGLE-H

Ships in 10 Business Days

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Vargas Turbo Technologies (VTT) S58 Single HPFP Conversion Kit is a revolutionary solution for high-horsepower BMW G8X and F9X builds.

PFS F97/F98 Drop In Brushless LPFP Upgrade - 1000whp Capable ...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:26938343

Part#: PFS-LPFP-X3/4M-N

In Stock

$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD

Limited Qty Sale

Add to Wish List

PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand-new PFS bucket

Show More Show Less

Vargas Turbo Technologies Shotgun Single Barrel - MT - STGN-SB-1-N54-...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:52305464

Part#: STGN-SB-1-N54-MT

Ships in 10 Business Days

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

The VTT Single Barrel for Manual Transmissions is the "Stage 1" of the Shotgun family, providing a massive headroom increase over the stock setup.

Vargas Turbo Technologies S58 Port Injection Block Off Injector Blank...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:52164930

Part#: S58PIBLORAIL

Ships in 10 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Maximize the versatility of your BMW S58 fuel system with the Vargas Turbo Technologies Port Injection Block Off Kit with Rail.

PFS Port Injection Kit - BMW G8X/F9X S58

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:52164908

Part#: PFS-S58-PI-NONE

Ships in 10 Business Days

$ 949.99 USD

Add to Wish List

Qty

$ 949.99 USD

Add to Wish List

The PFS S58 Port Injection Kit by Vargas Turbo Technologies is the solution for BMW owners who have reached the limits of their factory injection.

Vargas HPFP Block-Off Plate - BMW B58 & S58

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

Vargas Turbo Technologies S58 Port Injector Block Off Blanks - S58PIB...

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:52164927

Part#: S58PIBLOBLANKS

Ships in 10 Business Days

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

The PFS S58 Port Injection Block-Off Kit offers a robust and reliable way to seal secondary fuel ports in the S58 intake manifold.

PFS G8X Drop In Brushless LPFP Upgrade - 1000whp Capable

2X Entries Into Our F80 M3 Sweepstakes Earn 5% back in Turner Rewards on orders placed 10/26/26 - 10/31/26. Redeem 11/26/26 - 12/1/26. Terms & conditions apply

T#:26938293

Part#: PFS-LPFP-G8X-NEW

Back Ordered

$ 1,763.99 USD

Add to Wish List

Qty

$ 1,763.99 USD

Add to Wish List

PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for G -Series S58. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand new PFS bucket

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts

Sub-Categories

VTT N54 Vacuum Pump Block Off Plate

VTT BMW N54 “DI Injector” Delete Kit

Vargas Turbo Technologies Plug And Play S58 Single HPFP Conversion Ki...

PFS F97/F98 Drop In Brushless LPFP Upgrade - 1000whp Capable ...

Vargas Turbo Technologies Shotgun Single Barrel - MT - STGN-SB-1-N54-...

Vargas Turbo Technologies S58 Port Injection Block Off Injector Blank...

PFS Port Injection Kit - BMW G8X/F9X S58

Vargas HPFP Block-Off Plate - BMW B58 & S58

Vargas Turbo Technologies S58 Port Injector Block Off Blanks - S58PIB...

PFS G8X Drop In Brushless LPFP Upgrade - 1000whp Capable

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results