BMW Fuel System Parts

Deatschwerks 1200cc Fuel Injector Set - BMW E46 M3

T#:35391022

Part#: 16MX-30-1200-6

In Stock at Vendor

$ 819.00 USD

Add to Wish List

Qty

$ 819.00 USD

Add to Wish List

Maximize your engine's potential with the DW 1200cc Injector Set, a solution that bridges the gap between raw power and streetable drivability.

BM3 FlexFuel Kit - Engine Bay Location - F97/F98 X3M X4M Pre-LCI ...

T#:31092490

Part#: BM3FFKT

Ships in 10 Business Days

8% off MSRP $ 649.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.00 USD

Add to Wish List

Qty

8% off MSRP

$ 649.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.00 USD

Add to Wish List

BM3 is proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW with incredible ease and minimal effort, in your own driveway. BM3's kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car! BM3's team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol! Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location. Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used. Install the BM3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled BM3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this! BM3 FlexFuel Plug and Play Kit: Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical 4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring! Fully reversible/removable and back to stock without a trace in minutes Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat All connecting points sealed with fuel safe Viton o-rings Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for BM3 CustomROM v2 support CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with BM3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for BM3 Flex Fuel enabled OTS MultiMaps and custom tunes with your BM3 tuner of choice Power/CANBus 4-wire plug and play harness 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58 Continental Flex Fuel sensor 3-wire harness Custom Aluminum-6061 CANBus Enclosure for the BM3 ECA board Custom, kink-free teflon braided line allowing plug-and-play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required. -6 AN fitting by Racetronix

Show More Show Less

Fuel-It! Flex Fuel Kit - G2x/G3x/G4x B58

T#:21209864

Part#: GB58BFFK

Ships on Oct 29, 2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

The complete kit with Bluetooth ECA includes the following: Genuine Continental® ethanol sensor Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Fuel-It! Bluetooth analyzer (iPhone or Android app must be downloaded to use this kit) Plug and play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tuning *For the BMW G-series JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

PFS F97/F98 Drop In Brushless LPFP Upgrade - 1000whp Capable ...

2X Entries Into Our F80 M3 Sweepstakes

T#:26938343

Part#: PFS-LPFP-X3/4M-N

In Stock

$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,763.99

This product was last offered at the strikethrough price on
07-23-2026

$ 1,637.99 USD

Limited Qty Sale

Add to Wish List

PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. Every single pump is then fully tested on our flow bench to ensure proper function before shipping -you’re going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it. Brand new build: You keep your old pump, we send you a brand-new PFS bucket

Show More Show Less

Fuel Pump Assembly With Seal - In-Tank Suction Device

2X Entries Into Our F80 M3 Sweepstakes

T#:56977977

Part#: 16117341301

Ships in 1 Business Day

$ 212.99 USD

Add to Wish List

Qty

$ 212.99 USD

Add to Wish List

Don't let a failing fuel delivery system compromise your BMW’s power output or cause lean conditions when you need power most.

Fuel Pump Assembly With Fuel Level Sending Unit

T#:31556202

Part#: 16146767718

Ships in 1 Business Day

$ 452.05 USD

Add to Wish List

Qty

$ 452.05 USD

Add to Wish List

High-pressure fuel pump supply port caps

T#:5135636

Part#: AGA-CP-0-14

Ships in 7 Business Days

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Don't let dirt be the reason for bad fuel injectors.

MINI Fuel Pump - Supply Module

T#:54388518

Part#: 16117300477

Ships in 1 Business Day

$ 355.99 USD

Add to Wish List

Qty

$ 355.99 USD

Add to Wish List

On the street or at the track, volume and pressure are everything when it comes to fuel. A degrading fuel pump doesn't just rob your BMW of horsepower—it risks dangerous lean conditions when you're pushing the engine to its limits. When it’s time to replace a soft or failing pump, don't gamble on no-name budget brands. Go back to the source with this high-quality Bosch replacement fuel pump.

Show More Show Less

URO Fuel Pump Tank Seal - BMW E70/71 F15/16 F85/86

2X Entries Into Our F80 M3 Sweepstakes

T#:593021

Part#: 16117211570

Ships in 1 Business Day

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Replacement seal and clamp for your fuel pump and tank connection

E89 Silent Fan EKP PNP Cooler Kit - 40mm Noctua Fan

A Must For Cars With Upgraded LPFPs

T#:26471534

Part#: SILENT-E89-EKP

Ships in 1 Business Day

Starting at $ 59.99 USD

Add to Wish List

Starting at $ 59.99 USD

Add to Wish List

The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E82 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8, which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket in order to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable ASA, ABS or PETG, depending on the color choice. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With a Genuine 60mm or 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a silent Noctua fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

Fuel-It! Port Injection Kit - S55 F-Series

T#:403365

Part#: FIEPIK6

Back Ordered

Starting at $ 1,688.99 USD

Add to Wish List

Starting at $ 1,688.99 USD

Add to Wish List

Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.

PFS Port Injection Kit - B58

2X Entries Into Our F80 M3 Sweepstakes
Aftermarket charge pipe required

T#:5663657

Part#: PFS-B58-PI

Ships in 10 Business Days

Starting at $ 733.99 USD

Add to Wish List

Starting at $ 733.99 USD

Add to Wish List

The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

OEM Bosch Fuel Sender Unit -- E60 E63 E64

T#:372579

Part#: 16146765826

Ships in 1 Business Day

$ 185.99

This product was last offered at the strikethrough price on
08-13-2026

$ 155.99 USD

Add to Wish List

Qty

$ 155.99 USD

Add to Wish List

A bad fuel pump can leave you stranded at the worst time. Restore fuel pressure and have your car back on the road. Bosch fuel pumps are high quality and will give you peace of mind knowing you can count on them to last longer than any other brands. OEM replacement for BMW part number 16117373470, 16140301731, and 16146765826.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Fuel Injector Clinic 525cc Fuel Injector - Set of 4

T#:6940368

Part#: IS803-0525H

Ships in 1 Business Day

$ 352.00 USD

Add to Wish List

Qty

$ 352.00 USD

Add to Wish List

High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.

Show More Show Less

Dorch Engineering Gen1 DS25 HPFP Upgrade - G01, G02 - B58

T#:55461365

Part#: DE-581-25C

Ships in 4 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system

Show More Show Less

E89 EKP PNP Cooler Kit - (Z4)

A Must For Cars With Upgraded LPFPs

T#:26471566

Part#: E89-EKP-PNP

Ships in 1 Business Day

Starting at $ 44.99 USD

Add to Wish List

Starting at $ 44.99 USD

Add to Wish List

The full plug-and-play EKPM3 / EKPM2 cooler kit is designed specifically for E89 BMWs using an EKPM3 or EKPM2 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. Please note that if you have an HW06 + (Slim EKPM3), you must choose the HW06 option, as the pre-HW06 housings will not fit. Installation Tips: https://arcterminator.com/pages/e90-e92-e93-ekp-cooler-install-instructions We recommend using Fuse #8, which is the cigarette lighter fuse to power this. It is a 20 amp fuse, which you will just need to pull out and put it into the empty slot of the fuse holder that comes with the kit. Then you'll need to put that fuse holder into the now empty #8 fuse slot. This ensures that the fan will only turn on when the ignition in the car is turned on. You'll also need trim removal tools, as well as a 10mm socket to remove and re-install the EKP module. We recommend using the stock grounding point that's above the EKP module or the EKP module's mounting points as the ground. The ring terminal with the kit will fit either location. The whole installation should take you between 30 - 45 minutes. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+ or PETG, depending on the color choice. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x PNP EKPM3 / EKPM2 Cooler Housing With 5015 Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 2x 9x9x5mm Heatsink With Thermal Tape (EKPM2 Kit) 8x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

Fuel-It! Flex Fuel Kit - F-Chassis S55 - BMS/FI PI

T#:21275563

Part#: FFK-S55-FIP

Ships on Oct 29, 2026

$ 589.99 USD

Add to Wish List

Qty

$ 589.99 USD

Add to Wish List

If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your S55 BMW. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. For your fuel line upgrade, choose the option that supports your current configuration. HPFP to the fuel tank: (Stock) This upgrade replaces both stock fuel lines with one upgraded continuous fuel line from the fuel tank to the HPFP and adds the ethanol sensor. Port Injection to the fuel tank: If you are running our port injection kit, this upgrade replaces the stock fuel lines from the tank to the engine bay, integrates the ethanol sensor and then utilizes a Y adapter to supply the HPFP and PI with fuel. Our custom fittings remove those tee's and extra fittings for a cleaner high flow setup. Non-Fuel-It! port injection to fuel tank: Choose this option if you are running a port injection kit that we did not manufacture or sell. This kit includes a longer 18" feedline from the Y to the port injection rail. You then cut the feed line to the length you need and install the included -6an female fitting or -6an female elbow to make the connection to your port injection rail. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI Ethanol Setup option 1 to enable pin location 15/16 flex fuel input. *These kits are available for off-road use only *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Fuel-It! Bluetooth FLEX FUEL KIT For The S63TU 2012-2016 F10 BMW M5 &...

T#:16840517

Part#: FFKS63TUFXM

Ships on Oct 29, 2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

Know your exact ethanol content in real-time via the Fuel-it! or JB4 app on your smartphone or tablet. The kit includes the following: Genuine Continental® ethanol sensor Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration Fuel-It! Bluetooth analyzer (iPhone or Android app must be purchased to use this kit) Plug and play harness Includes both Bluetooth App & 5v analog output for JB4 or flash tuning Bluetooth (iPhone or Android app must be downloaded to use this feature) *For the BMW F-series JB4 platform connect the white wire to position #16 on the JB4 25 pin harness. Select WMI page bit 1 to enable. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

Radium - Split-Flow Flex Fuel Sensor Adapter

T#:53290958

Part#: 20-0589

In Stock at Vendor

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

URO Fuel Tank Level Sending Unit - BMW E39

2X Entries Into Our F80 M3 Sweepstakes

T#:18468301

Part#: 16141183179

In Stock

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

URO Fuel Tank Sending Unit - BMW E39

The URO Fuel Tank Sending Unit - BMW E39 is an essential replacement part for ensuring accurate fuel level readings in your BMW. This high-quality fuel tank sending unit is designed to fit perfectly within the fuel system of the BMW E39, providing reliable performance and preventing any fuel gauge issues. Whether replacing a faulty unit or upgrading an older one, the URO Fuel Tank Sending Unit ensures that your fuel gauge operates accurately and efficiently.

Designed for a perfect fit in the BMW E39 fuel system
High-quality construction ensures reliable fuel level readings
Helps prevent fuel gauge malfunctions and inaccuracies
Easy to install with OE-quality design for a hassle-free replacement
Durable materials withstand the demands of long-term fuel system use

Show More Show Less

Fuel-It! Flex Fuel Kit - B58 G05

T#:21275576

Part#: FFK-B58X-FK

Ships on Oct 29, 2026

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

Know your exact ethanol content in real-time via the Fuel-It! or JB4 mobile app on your smartphone or tablet. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer One stainless steel braided fuel line with black nylon sheathing to protect your other engine bay components Proprietary custom billet fitting for plug and play OEM integration One custom wiring harness 1 tube of SuperLube® for hose adapter install Bluetooth Model Supports stand-alone Bluetooth operation with the Fuel-It! app *For the G-series JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

ProFlex Commander Adaptive E85 Flex Fuel System

T#:589749

Part#: PCF-E39M5-K

Ships in 2 Business Days

Starting at $ 899.00 USD

Add to Wish List

Starting at $ 899.00 USD

Add to Wish List

This full bolt on kit is a complete solution allowing you to alternate between standard and flex fuels without any tuning or mode switching.

Second Fuel Rail Kit for CSF B58 & S58 Air-to-Air Billet Manifolds ...

2X Entries Into Our F80 M3 Sweepstakes

T#:56001929

Part#: CSF8404

Ships in 3 Business Days

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

Eliminate fuel starvation on your high boost S58 or B58 build with this track engineered, billet aluminum secondary port injection rail built to handle extreme fueling demands.

Fuel-It! Flex Fuel Kit - B58 G29 Z4

T#:21275568

Part#: FFK-G29Z4-CK

Ships on Oct 29, 2026

$ 479.99 USD

Add to Wish List

Qty

$ 479.99 USD

Add to Wish List

If you are running E85 or ethanol mixes in your BMW, you need this kit! This is a complete plug and play kit to install a Bluetooth ethanol sensor in your B58 powered G29 Z4. This kit replaces the stock fuel lines from the fuel tank to the engine bay with an upgraded -6an E85 compatible fuel line and adds an ethanol sensor and Bluetooth analyzer to monitor your ethanol content. Includes both Bluetooth App & 5v analog output for JB4 or flash tuning. All of these kits utilize the BMS custom billet aluminum fittings to integrate with the stock fittings so no modifications are needed. For the G29 Z4 JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.

Show More Show Less

URO Breather Hose - E36, Z3

2X Entries Into Our F80 M3 Sweepstakes

T#:592992

Part#: 13411247782

Ships in 1 Business Day

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Used in the air intake system

Fuel Injector Clinic 650cc Fuel Injector - Set of 4

T#:6940367

Part#: IS803-0650H

Ships in 1 Business Day

$ 378.00 USD

Add to Wish List

Qty

$ 378.00 USD

Add to Wish List

High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.

Show More Show Less

Victor Reinz Fuel Pump Insulating Gasket

T#:581945

Part#: 702113130

Ships in 1 Business Day

$ 5.20

This product was last offered at the strikethrough price on
08-26-2026

$ 4.49 USD

Add to Wish List

Qty

$ 4.49 USD

Add to Wish List

Replacement gasket from Victor Reinz

Genuine BMW Injector - 13647629174 - F30

T#:595038

Part#: 13647629174

Ships in 1 Business Day

$ 118.99

This product was last offered at the strikethrough price on
05-07-2026

$ 114.99 USD

Add to Wish List

Qty

$ 114.99 USD

Add to Wish List

Bosch BMW Injector -
This item fits the following BMW Chassis:
F30

Fits BMW Engines including:
N26

Fuel Pump

2X Entries Into Our F80 M3 Sweepstakes

T#:588781

Part#: 16147161387

Ships in 1 Business Day

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

Dorch Engineering PWG N55 49% Lift Kit – HPFP Upgrade - with $400 c...

T#:55569525

Part#: DE-LK-1049-PWGKT

Ships in 4 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Dorch Engineering N55 PWG Lift Kit is the upgrade your BMW needs. By optimizing the fuel pump lift profile, this kit allows your HPFP to pump significantly more fuel per revolution. Designed specifically for the early Pneumatic Wastegate (PWG) N55 engines

Show More Show Less

Flex Fuel ECA - Plug and Play - Dorch HPFP - G42, G20, G22, G23, G26,...

T#:55713512

Part#: DE-582-ECA-571

Ships in 4 Business Days

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

This hardware package gives your BMW powerplant the ability to scale output dynamically based on your exact ethanol blend. No more draining the tank or flashing different maps at the gas station

Flex Fuel ECA - Plug and Play - Dorch HPFP - G30, G32, G11 - B58 Gen ...

T#:55713500

Part#: DE-581-ECA-57

Ships in 4 Business Days

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58

Gates Locking Fuel Tank Cap - R55, R56, R57, R58, R59, R60, R61 ...

T#:54388416

Part#: 31778

Ships in 1 Business Day

$ 25.68 USD

Add to Wish List

Qty

$ 25.68 USD

Add to Wish List

The Gates Locking Fuel Cap is a straightforward, heavy-duty upgrade designed to seal your fuel system tight and keep unwanted hands out of your tank.

T#:55713499

Part#: DE-581-ECA-14OG

Ships in 4 Business Days

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58

Flex Fuel ECA - Plug and Play - TU HPFP - G30, G32, G11 - B58 Gen 1 ...

T#:55713501

Part#: DE-581-ECA-57TU

Ships in 4 Business Days

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58

Fuel Pump - High Pressure HM10080

T#:639448

Part#: 13518605102

Ships in 1 Business Day

$ 1,246.99

This product was last offered at the strikethrough price on
05-08-2026

$ 1,210.99 USD

Add to Wish List

Qty

$ 1,210.99 USD

Add to Wish List

Dorch Engineering EWG N55 49% Lift Kit – HPFP Upgrade - with $400 c...

T#:55569521

Part#: DE-LK-1049-EWGKT

Ships in 4 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

Engineered specifically for high power builds that push the direct injection threshold, this lift kit overrides the typical N55 fueling bottleneck by overdriving the high pressure fuel pump mechanism.

Dorch Engineering DS3 HPFP Upgrade - A90, G29 - B58 Gen 2

T#:55713519

Part#: DE-582-30TS

Ships in 4 Business Days

$ 2,399.00 USD

Add to Wish List

Qty

$ 2,399.00 USD

Add to Wish List

The Dorch Engineering DS3 B58 Gen2 High Pressure Fuel Pump Upgrade is the highest-flowing single-pump direct injection solution on the market. Engineered for aggressive ethanol builds

DeatschWerks Performance Fuel Injector Set - 600cc

For Custom Applications - Will require additional tuning or modifications.

T#:6151332

Part#: 17MX-00-0600-10

In Stock at Vendor

$ 1,029.00 USD

Add to Wish List

Qty

$ 1,029.00 USD

Add to Wish List

DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 10 600cc injectors. All relevant tuning data available on DeatschWerks website.

Show More Show Less

PFS Port Injection Kit - 900CC - BMW B58

T#:51813340

Part#: PFS-B58-PI-8

Ships in 10 Business Days

$ 2,159.99 USD

Add to Wish List

Qty

$ 2,159.99 USD

Add to Wish List

When factory fueling becomes the bottleneck in your B58 build, the Vargas Turbo Technologies PFS Port Injection Kit steps in as the ultimate hardware solution.

PFS Port Injection Kit - BMW G8X/F9X S58

2X Entries Into Our F80 M3 Sweepstakes

T#:52164908

Part#: PFS-S58-PI-NONE

Ships in 10 Business Days

$ 949.99 USD

Add to Wish List

Qty

$ 949.99 USD

Add to Wish List

The PFS S58 Port Injection Kit by Vargas Turbo Technologies is the solution for BMW owners who have reached the limits of their factory injection.

Vargas Port Injection Block Off Injector Blanks With Rail - BMW G8X F...

2X Entries Into Our F80 M3 Sweepstakes

T#:52164930

Part#: S58PIBLORAIL

Ships in 10 Business Days

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Maximize the versatility of your BMW S58 fuel system with the Vargas Turbo Technologies Port Injection Block Off Kit with Rail.

Flex Fuel ECA - Plug and Play - OEM HPFP - G42, G20, G22, G23, G26, G...

T#:55713513

Part#: DE-582-ECA-572

Ships in 4 Business Days

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

This hardware package gives your BMW powerplant the ability to scale output dynamically based on your exact ethanol blend. No more draining the tank or flashing different maps at the gas station

Project Cars

SELECT YOUR BMW

Sub-Categories

URO Fuel Tank Sending Unit - BMW E39

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results