Active Autowerke BMW Exhaust Parts, Mufflers & Catalytic Converters

Active Autowerke Valve Rear Axle-Back Exhaust (Black Tips) - G90/G99 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285655

Part#: 11-141B

Ships in 3 Business Days

$ 4,369.00 USD

Add to Wish List

Qty

$ 4,369.00 USD

Add to Wish List

For the owner of the new G90 M5, the Active Autowerke Signature Catback System offers the perfect balance of luxury refinement and aggressive performance. Constructed entirely from corrosion-resistant T304 stainless steel, this system is built to withstand extreme thermal loads while maintaining a lifetime of consistent finish. The engineering team focused heavily on "Sound Engineering," ensuring that while the exhaust is louder and deeper than stock, it remains completely free of interior cabin drone—a critical requirement for the high-end M5 experience. With its direct-fit installation and a variety of 112mm quad tip finishes, this exhaust provides a surgical fit and a premium upgrade that complements the caliber of the world’s most powerful M-sedan. Key Features: USA Fabricated: Hand-made in Miami, FL, using precision TIG welding and master fixtures for a guaranteed fit. Daily Driveability: Tuned for a clean, sophisticated idle and low-drone cruising, ideal for long highway trips. Advanced Material Science: T304 Stainless construction offers superior heat resistance and long-term durability. Inclusive Hardware Kit: Includes all clamps, gaskets, and valve motor brackets required for a seamless install. Enhanced Visuals: Quad 112mm dual-wall tips are designed to resist heat discoloration and fill out the bumper cutouts. Specifications: System Type: Valved Full Catback Exhaust Tubing: Mandrel-bent for zero-turbulence exhaust gas flow Valve Operation: Independent remote-controlled electronic valves Performance Gain: +20–25 lb-ft torque (Estimated) Vehicle Fitment: 2025+ BMW M5 (G90 Sedan and G99 Touring) Tip Options: Brushed Stainless Matte Black Carbon Fiber

Show More Show Less

Active Autowerke GESI Catted Downpipes - S63 N63

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:397488

Part#: 11-041

Ships in 3 Business Days

5% off MSRP $ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

Qty

5% off MSRP

$ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

Active Autowerke is proud to bring you our hand made Signature S63/N63 Downpipes for the twin-turbo V8 BMW X5M, X6M, 550i, 650i, X5, X6 models. This variant includes a pair of 4.5" ultra high flow GESI catalytic converter that will NOT produce a CEL!

Show More Show Less

Active Autowerke Valved Rear Axle-back Exhaust (Black Tips) - F97/F98...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51039980

Part#: 11-103B

Ships in 3 Business Days

$ 3,799.00 USD

Add to Wish List

Qty

$ 3,799.00 USD

Add to Wish List

At Active Autowerke, performance is about more than peak numbers. It’s about delivering a driving experience that feels sharper, sounds better, and maintains the refinement expected from a modern BMW. With over four decades of BMW performance development behind it, the F97/F98 X3M/X4M rear exhaust was engineered to give the S58-powered platform the deeper, more assertive tone many owners feel the factory system lacks. This axle-back system increases exhaust presence while preserving proper flow and daily drivability. By retaining the factory valve actuators, the system maintains full OEM functionality — delivering an aggressive note with the valves open and a controlled, composed tone when closed. On its own, the rear section provides a noticeable but refined sound improvement. For owners looking to maximize both sound and performance, the system pairs effectively with Active Autowerke mid-pipes and catted downpipes. Construction focuses on durability and consistent fit. The exhaust is manufactured from high-quality 304 stainless steel and each unit is test-fit on Active Autowerke’s dedicated F97/F98 fixture to ensure proper alignment and installation. Important Fitment Information A version is available for vehicles retaining the factory mid-pipes. If you later upgrade to an Active Autowerke or other aftermarket mid-pipe, different connecting pipes may be required. Sound Note: The rear section alone offers a refined increase in volume. The most significant sound change occurs when paired with an upgraded mid-pipe. Product Highlights Designed and manufactured in the USA Constructed from durable 304 stainless steel Deeper, more aggressive tone while retaining factory valve control Reuses OEM BMW exhaust valve actuators Each system test-fit on F97/F98 exhaust fixture Guaranteed fitment for F97/F98 BMW X3M and X4M Includes all necessary installation hardware

Show More Show Less

Active Autowerke Performance Valved Rear Exhaust - GEN 2 - Brushed Ti...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:18534632

Part#: 11-115T

Ships in 3 Business Days

$ 1,139.99 USD

Add to Wish List

Qty

$ 1,139.99 USD

Add to Wish List

True BMW performance, durability, and attractive weight advantages with innovative features places the Active Autowerke BMW F22 235i exhaust in a class of its own. And now Active Autowerke has developed Gen 2 of this model which has been enhanced to take advantage of the OEM valve system. This system is constructed from 100% Brushed 304-stainless steel and features adjustable brushed, black or carbon Active Autowerke double-walled tips, making it ideal both for 2-door and 4-door models. And now the improved sound becomes more pronounced when the valve is opened by the ECU. Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value. The Active Autowerke F22 235i Gen 2 BMW Rear Exhaust System provides an increase in horsepower, better sound and appearance making it the choice for the avid BMW enthusiast. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Our innovative muffler can design provides maximum volume with the exhaust valve open for a true sport sound. This exhaust delivers a wide-open sound, a solid 15+hp boost, and key gains in the midrange with the valve open while the sound comes out non-intrusive with a rich mellow tone with the valve closed. Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy-duty TORCA-style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal. Other features like height-adjustable mounting tabs make this exhaust easy to install. Key Features: Large mandrel bent piping for maximum flow Uses factory valve system for maximum exhaust sound Durable, Brushed 100% 304 stainless steel for durability Double-walled signature brushed, black or carbon stainless tips Adjustable Tips with Embossed Active Autowerke Logo Improved power & torque throughout entire RPM band Gains of 12-15 HP over stock configuration Tight seal with use of TORCA style exhaust clamps Height adjustable mounting brackets make installation easy Factory curb weight 27.0 Lbs, Active 335i weighs 22.0 Lbs Fitment for Coupe & Convertible Complete illustrated instruction manual Two year warranty Installation Instructions: http://images.activeautowerke.com/Installation%20PDF's/F2X_M235_Rear_Exhaust_Installtion.pdf

Show More Show Less

M340i Valved Rear Exhaust W Black Tips

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51110155

Part#: 11-089B

Ships in 10 Business Days

$ 1,956.99 USD

Add to Wish List

Qty

$ 1,956.99 USD

Add to Wish List

Awaken the B58: Active Autowerke G20 M340i / G22 M440i Valved Axle-Back Exhaust From the factory, the G-series M340i and M440i are notoriously quiet, leaving the sonorous B58 inline-six feeling a bit muffled. Active Autowerke’s valved rear exhaust is the solution for enthusiasts who want to bridge the gap between "daily driver" and "motorsport-inspired." This axle-back system was engineered to replace the lackluster stock muffler with a high-flow, 304 stainless steel unit that captures a deep, hearty growl worthy of the BMW 'M' badge. By reusing the factory valve actuator, this system keeps your driving modes functional—providing a refined tone for the commute and a rowdy, unrestricted bark when you’re in the mood to let it rip. It’s the perfect "OEM+" upgrade that delivers the aggressive sound your BMW should have arrived with. Engineering & Tone Active Autowerke spent months fine-tuning the resonance of this system to ensure it provides a low-frequency rumble without the high-pitched rasp found in cheaper alternatives. Valved Versatility: Retains full integration with your factory BMW drive modes (Eco, Comfort, Sport). High-Flow Design: Maximizes exhaust gas scavenging for improved throttle response and midrange punch. Aggressive Styling: Available with quad tips to fill out the rear diffuser and provide a menacing track-ready look. Key Features: Hand-Built Quality: Fabricated in the USA from premium T304 Stainless Steel. Precision Fitment: Every unit is test-fitted on a dedicated G-series fixture to guarantee a perfect bolt-on install. Motorsport-Inspired Sound: Replaces the whisper-quiet factory muffler with a deep, throaty signature note. All-Inclusive Kit: Includes all necessary clamps and hardware for a straightforward installation. Specifications: Material: Mandrel-bent 304 Stainless Steel Type: Valved Axle-Back (Requires cutting of factory mid-pipe for installation) Valve Operation: Compatible with OEM BMW actuator Vehicle Fitment: * 2019+ BMW M340i / M340i xDrive (G20) 2021+ BMW M440i / M440i xDrive (G22/G23/G26)

Show More Show Less

Signature Performance Valved Rear Exhaust - Generation 2 - Black Tips...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50934830

Part#: 11-115B

Ships in 3 Business Days

$ 1,177.00 USD

Add to Wish List

Qty

$ 1,177.00 USD

Add to Wish List

True BMW performance, durability, and attractive weight advantages with innovative features place the Active Autowerke BMW F3x 335i exhaust in a class of its own. And now Active Autowerke has developed Gen 2 of this model which has been enhanced to take advantage of the OEM valve system. This system is constructed from 100% Brushed 304-stainless steel and features adjustable brushed Active Autowerke double-walled tips. And now the improved sound becomes more pronounced when the valve is opened by the ECU. Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value. The Active Autowerke F3x 335i Gen 2 BMW Rear Exhaust System provides an increase in horsepower, better sound and appearance making it the choice for the avid BMW enthusiast. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Our innovative muffler can design provides maximum volume with the exhaust valve open for a true sport sound. This exhaust delivers a wide-open sound, a solid 15+hp boost and key gains in the midrange with the valve open while the sound comes out nonintrusive with a rich mellow tone with the valve closed. Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy-duty TORCA style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal. Other features like height-adjustable mounting tabs make this exhaust easy to install. Key Features: Large mandrel bent piping for maximum flow Uses factory valve system for maximum exhaust sound Durable, Brushed 100% 304 stainless steel for durability Double-walled signature brushed, black or carbon stainless tips Adjustable Tips with Embossed Active Autowerke Logo Improved power & torque throughout entire RPM band Gains of 12-15 HP over stock configuration Tight seal with use of TORCA style exhaust clamps Height adjustable mounting brackets make installation easy Factory curb weight 27.0 Lbs, Active 335i weighs 22.0 Lbs Fitment for Coupe, Convertible and Sedans Complete illustrated instruction manual Two-year warranty Applications: BMW F30 335i, xi (Sedan) BMW F32 435i, xi (Coupe) BMW F33 435i, xi (Convertible) BMW F36 435i (Coupe)

Show More Show Less

Active Autowerke G4X BMW M240i Valved Rear Axle-back Exhaust (Carbon ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285645

Part#: 11-125CB

Ships in 3 Business Days

$ 2,469.00 USD

Add to Wish List

Qty

$ 2,469.00 USD

Add to Wish List

For over 40 years, Active Autowerke has been at the forefront of BMW performance, and the G4X M240i axle-back exhaust represents the pinnacle of that development. This system is constructed entirely from TIG-welded 304 stainless steel, offering maximum resistance to corrosion and heat cycles. Unlike universal systems, this exhaust is engineered specifically for the G42 chassis, ensuring that every hanger and flange aligns perfectly. By retaining the factory valve control, this exhaust offers a "no-compromise" solution: it stays quiet and sophisticated when you need it, but opens up for maximum volume and performance when you want it. Each kit is a comprehensive package, providing all hardware required to transform your M240i’s rear section. Key Features: Surgical Precision: Every unit is test-fitted on a dedicated fixture to ensure zero-clearance issues with the chassis or diffuser. Premium Materials: Full 304 Stainless Steel construction ensures a lifetime of performance. OEM Integration: No need for extra wiring or controllers; works seamlessly with your car's computer. Aggressive Rear Stance: Fills the rear bumper cutouts more effectively than the stock rectangular tips. Performance Gains: Improved exhaust scavenging contributes to a more responsive B58 engine. Specifications: Type: Valved Rear Axle-back Exhaust Section SKU: 11-125 Finish: Brushed Stainless (Standard) Hardware: Includes all high-grade connecting hardware Vehicle Fitment: * 2022+ BMW M240i / M240i xDrive (G42 Chassis) Custom Options: Available in multiple tip finishes to match your specific trim package

Show More Show Less

Active Autowerke Axle-Back Exhaust With Carbon Fiber Tips - G8x - M3/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:24610573

Part#: 11-086C

Ships in 3 Business Days

$ 2,944.99 USD

Add to Wish List

Qty

$ 2,944.99 USD

Add to Wish List

The Active Autowerke G80/G82 rear exhaust was carefully engineered to increase the sound level over the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance by reusing the actuators from the BMW valves. Every effort was made in addressing the overly quiet sound of the stock OEM exhaust while designing an exhaust worthy for an "M" car. We believe our rear exhaust combined with our mid-pipe and catted downpipes offers the best combination of sound and performance versus any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory! KEY FEATURES Made in the USA 304 Stainless Steel Low, Deep Sound with stock Valve Control Each exhaust test-fit on our G80/G82 Exhaust Fixture Guaranteed to fit all G80/G82 BMW M3/M4 Includes all necessary installation hardware At Active Autowerke, it's not ONLY about making as much power as possible but to maximize the enjoyment of the drive. For over 40 years, power has been the end result of improved performance due to our relentless desire to develop a refined, quality product. This philosophy behind our performance parts is best represented by the introduction of G80/G82 BMW M3/M4 collection rear exhaust.

Show More Show Less

Active Autowerke Performance Catted Downpipes - Flanged - E70/71 E60/...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Model Years 2010-2012 Only - VIN Required for Purchase

T#:22822600

Part#: 11-041F

Ships in 10 Business Days

5% off MSRP $ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

Qty

5% off MSRP

$ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

The S63 and N63 twin-turbo V8s are world-class powerplants, but they’ve got a breathing problem. From the factory, your BMW X5M, X6M, 550i, or 650i is suffocating under massive backpressure caused by restrictive, bulky catalytic converters that trap heat and kill momentum. If you want real power, you have to let those turbos spin. Active Autowerke’s Signature High-Flow Downpipes are the ultimate "no-compromise" upgrade for the serious BMW enthusiast. Hand-fabricated in Miami, these 3.0" downpipes utilize GESi G-Sport Ultra High Output technology. You get the raw performance and rapid spool of a track setup with the refined, odorless experience of a daily driver—and most importantly, no Check Engine Light. Why These Downpipes Belong on Your BMW: Turbo performance is all about the pressure differential. By clearing the path behind the turbine wheel, you allow the turbos to work significantly less to produce significantly more. Instant Turbo Response: Experience a massive reduction in lag with quicker spool-up and instant throttle tip-in. Massive Power Ceiling: The 4.5" GESi 400-cell cores are rated for 500hp to 850hp, ensuring they won't become a bottleneck as you climb the ladder of modifications. Clean & Odorless: Forget the "gas station" smell of catless downpipes. These proprietary precious-metal catalysts keep the air clean and your cabin comfortable. Hand-Built Precision These aren't mass-produced units. Each set is TIG-welded 304 stainless steel with cast upper V-band flanges for a factory-perfect, leak-free seal. Because Active Autowerke builds these in-house, the fitment is surgical—designed for a straightforward bolt-on installation with no cutting or welding required. Turner Fitment Note: To guarantee 100% accuracy for your build, please provide your VIN at checkout. Note: These are F-chassis specific; G-body vehicles with the N63B engine require a different configuration. Core Features: No CEL Guarantee: Optimized for catalytic efficiency to keep your dashboard clear. 49-State Legal: EPA Registered and fully OBD2 compliant (Excludes CA). Built for Heat: Rated to withstand up to 1,500°F and reaches operational efficiency in just 9 seconds. Legendary Durability: 304 stainless substrate is furnace-braised to the mantle for maximum vibration resistance. Warranty Protected: Includes a 5-year/50,000-mile structural warranty and a 2-year/25,000-mile catalyst core warranty.* Technical Specs: Material: TIG-Welded 304 Stainless Steel Tubing: Full 3.0" (76mm) Mandrel-Bent Piping Catalyst: GESi Ultra High Output (400 CPI) HP Rating: 500hp - 850hp Lead Time: Custom made-to-order (Approx. 2 weeks) *A Note on Burble Tunes: We love a good exhaust crackle as much as anyone, but "aggressive" burble or pop maps physically destroy catalytic substrates. Use of such tunes will void the warranty on the GESi core.

Show More Show Less

Active Autowerke AFlow Catted Downpipe - B58N G06/G06/G07

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For 2024+ Models -- Please call in with vin prior to purchase

T#:51426482

Part#: 11-062NA

Ships in 10 Business Days

$ 1,519.00 USD

Add to Wish List

Qty

$ 1,519.00 USD

Add to Wish List

Active Autowerke brings motorsport technology to street-legal applications with the B58N Aflow Catted Downpipe. This system features a high-efficiency 400 Cell Per Square Inch (CPSI) Active Aflow catalytic converter that is EPA registered and 49-state legal. By utilizing proprietary precious metal loading, this catalyst reaches operational efficiency within just 9 seconds of startup, ensuring the vehicle remains fully OBD2 compliant. The furnace-brazed stainless steel substrate ensures extreme durability under high-boost conditions. This downpipe provides the flow characteristics of a race pipe while effectively neutralizing harmful emissions and odors, protecting both the environment and the vehicle's passengers. Key Features Active AFlow High-Flow Catalyst: 400 CPSI substrate designed to provide maximum flow while maintaining EPA compliance. Rapid Light-Off Time: Reaches operational efficiency within 9 seconds, ensuring OBD2 readiness monitors remain active. Forced Induction Optimized: Specifically engineered for high-boost applications with zero loss in horsepower. Extreme Heat Resistance: Built to withstand internal exhaust gas temperatures (EGTs) up to 1500°F. Durable Construction: Substrate is furnace-brazed to the mantle, preventing the internal core from shifting or breaking under heavy vibration. Specifications Vehicle Fitment: 2025+ BMW B58N Models (X3-40i, X3-M50i, X5-40i, X7-40i, 540i, 640i, 740i). Cell Density: 400 Cells Per Square Inch (CPSI). Catalyst Material: 304 Stainless Steel Substrate. Compliance: EPA Registered / 49-State Legal (Not CARB registered for California). Warranty: 5-Year/50,000-Mile on shell/ends; 2-Year/25,000-Mile on the catalytic core (Warranty void with "burble" tunes).

Show More Show Less

Active Autowerke Axle-Back Exhaust With Matte Black Tips - G8x - M3/M...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:24610574

Part#: 11-086B

Ships in 3 Business Days

$ 2,469.99 USD

Add to Wish List

Qty

$ 2,469.99 USD

Add to Wish List

The Active Autowerke G80/G82 rear exhaust was carefully engineered to increase the sound level over the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance by reusing the actuators from the BMW valves. Every effort was made in addressing the overly quiet sound of the stock OEM exhaust while designing an exhaust worthy for an "M" car. We believe our rear exhaust combined with our mid-pipe and catted downpipes offers the best combination of sound and performance versus any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory! KEY FEATURES Made in the USA 304 Stainless Steel Low, Deep Sound with stock Valve Control Each exhaust test-fit on our G80/G82 Exhaust Fixture Guaranteed to fit all G80/G82 BMW M3/M4 Includes all necessary installation hardware At Active Autowerke, it's not ONLY about making as much power as possible but to maximize the enjoyment of the drive. For over 40 years, power has been the end result of improved performance due to our relentless desire to develop a refined, quality product. This philosophy behind our performance parts is best represented by the introduction of G80/G82 BMW M3/M4 collection rear exhaust.

Show More Show Less

Active Autowerke Performance Valved Rear Exhaust - GEN 2 - Black Tips...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:18534633

Part#: 11-115TB

Ships in 3 Business Days

$ 1,177.99 USD

Add to Wish List

Qty

$ 1,177.99 USD

Add to Wish List

True BMW performance, durability, and attractive weight advantages with innovative features places the Active Autowerke BMW F22 235i exhaust in a class of its own. And now Active Autowerke has developed Gen 2 of this model which has been enhanced to take advantage of the OEM valve system. This system is constructed from 100% Brushed 304-stainless steel and features adjustable brushed, black or carbon Active Autowerke double-walled tips, making it ideal both for 2-door and 4-door models. And now the improved sound becomes more pronounced when the valve is opened by the ECU. Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value. The Active Autowerke F22 235i Gen 2 BMW Rear Exhaust System provides an increase in horsepower, better sound and appearance making it the choice for the avid BMW enthusiast. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Our innovative muffler can design provides maximum volume with the exhaust valve open for a true sport sound. This exhaust delivers a wide-open sound, a solid 15+hp boost, and key gains in the midrange with the valve open while the sound comes out non-intrusive with a rich mellow tone with the valve closed. Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy-duty TORCA-style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal. Other features like height-adjustable mounting tabs make this exhaust easy to install. Key Features: Large mandrel bent piping for maximum flow Uses factory valve system for maximum exhaust sound Durable, Brushed 100% 304 stainless steel for durability Double-walled signature brushed, black or carbon stainless tips Adjustable Tips with Embossed Active Autowerke Logo Improved power & torque throughout entire RPM band Gains of 12-15 HP over stock configuration Tight seal with use of TORCA style exhaust clamps Height adjustable mounting brackets make installation easy Factory curb weight 27.0 Lbs, Active 335i weighs 22.0 Lbs Fitment for Coupe & Convertible Complete illustrated instruction manual Two year warranty Installation Instructions: http://images.activeautowerke.com/Installation%20PDF's/F2X_M235_Rear_Exhaust_Installtion.pdf

Show More Show Less

Active Autowerke A-Flow Catted Downpipes - S63/N63

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Model Years 2010-2012 Only

T#:51110141

Part#: 11-041AF

Ships in 3 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

For the BMW enthusiast seeking an aggressive upgrade for their 2010–2012 X5M or X6M without the drawbacks of "stinky" exhaust or frequent error codes, Active Autowerke offers the Aflow Catted Downpipes. These units provide the performance benefits typically associated with track-only pipes while maintaining high-flow catalytic efficiency. This design prevents the raw fuel odor and excessive cabin drone often found in catless setups, making them the ideal choice for a performance-oriented daily driver. Each set is custom-made in Miami, ensuring an exact, surgical fit to the factory mounting points. By utilizing high-quality casted V-band flanges and premium materials, these downpipes offer a reliable, leak-free solution that enhances the sophisticated V8 exhaust note without triggering the Check Engine Light (CEL). Key Features: No CEL Guarantee: Advanced Aflow catalyst design avoids catalytic efficiency warnings on the dashboard. Refined Exhaust Note: Enhances the natural V8 growl while maintaining high-end luxury refinement. Cast V-Band Connections: Precision upper flanges ensure a perfect, factory-like seal to the turbo housing. Direct Bolt-On: Replaces bulky OEM ceramic converters with no cutting or welding required. Thermal Management: Efficiently handles the high heat output of the BMW twin-turbo V8 platform. U.S. Manufacturing: Fabricated in-house to meet Active Autowerke’s high standards of quality control. Specifications: Primary Material: TIG-Welded 304 Stainless Steel. Manufacturing Location: Miami, FL, USA. Inlet Type: Casted Stainless Steel Flange. Weight Reduction: Significantly lighter than the heavy factory ceramic catalytic assemblies. Finish: Industrial brushed stainless. Build Time: Custom made-to-order (Approx. 2 weeks).

Show More Show Less

G4X BMW M240i Valved Rear Axle-back Exhaust (Black Tips) - G4X M240i ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285638

Part#: 11-125B

Ships in 3 Business Days

$ 1,956.00 USD

Add to Wish List

Qty

$ 1,956.00 USD

Add to Wish List

For over 40 years, Active Autowerke has been at the forefront of BMW performance, and the G4X M240i axle-back exhaust represents the pinnacle of that development. This system is constructed entirely from TIG-welded 304 stainless steel, offering maximum resistance to corrosion and heat cycles. Unlike universal systems, this exhaust is engineered specifically for the G42 chassis, ensuring that every hanger and flange aligns perfectly. By retaining the factory valve control, this exhaust offers a "no-compromise" solution: it stays quiet and sophisticated when you need it, but opens up for maximum volume and performance when you want it. Each kit is a comprehensive package, providing all hardware required to transform your M240i’s rear section. Key Features: Surgical Precision: Every unit is test-fitted on a dedicated fixture to ensure zero-clearance issues with the chassis or diffuser. Premium Materials: Full 304 Stainless Steel construction ensures a lifetime of performance. OEM Integration: No need for extra wiring or controllers; works seamlessly with your car's computer. Aggressive Rear Stance: Fills the rear bumper cutouts more effectively than the stock rectangular tips. Performance Gains: Improved exhaust scavenging contributes to a more responsive B58 engine. Specifications: Type: Valved Rear Axle-back Exhaust Section SKU: 11-125 Finish: Brushed Stainless (Standard) Hardware: Includes all high-grade connecting hardware Vehicle Fitment: * 2022+ BMW M240i / M240i xDrive (G42 Chassis) Custom Options: Available in multiple tip finishes to match your specific trim package

Show More Show Less

G4X BMW M240i Valved Rear Axle-back Exhaust (Carbon Tips) - G4X M240i...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285642

Part#: 11-125C

Ships in 3 Business Days

$ 2,374.00 USD

Add to Wish List

Qty

$ 2,374.00 USD

Add to Wish List

For over 40 years, Active Autowerke has been at the forefront of BMW performance, and the G4X M240i axle-back exhaust represents the pinnacle of that development. This system is constructed entirely from TIG-welded 304 stainless steel, offering maximum resistance to corrosion and heat cycles. Unlike universal systems, this exhaust is engineered specifically for the G42 chassis, ensuring that every hanger and flange aligns perfectly. By retaining the factory valve control, this exhaust offers a "no-compromise" solution: it stays quiet and sophisticated when you need it, but opens up for maximum volume and performance when you want it. Each kit is a comprehensive package, providing all hardware required to transform your M240i’s rear section. Key Features: Surgical Precision: Every unit is test-fitted on a dedicated fixture to ensure zero-clearance issues with the chassis or diffuser. Premium Materials: Full 304 Stainless Steel construction ensures a lifetime of performance. OEM Integration: No need for extra wiring or controllers; works seamlessly with your car's computer. Aggressive Rear Stance: Fills the rear bumper cutouts more effectively than the stock rectangular tips. Performance Gains: Improved exhaust scavenging contributes to a more responsive B58 engine. Specifications: Type: Valved Rear Axle-back Exhaust Section SKU: 11-125 Finish: Brushed Stainless (Standard) Hardware: Includes all high-grade connecting hardware Vehicle Fitment: * 2022+ BMW M240i / M240i xDrive (G42 Chassis) Custom Options: Available in multiple tip finishes to match your specific trim package

Show More Show Less

Active Autowerke GESI Catted Downpipes - G90 M5

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285673

Part#: 11-142

Ships in 10 Business Days

$ 3,324.00 USD

Add to Wish List

Qty

$ 3,324.00 USD

Add to Wish List

For the owner of the G90 M5 who demands both high performance and environmental responsibility, Active Autowerke offers the GESI Catted Downpipes. These units feature genuine GESi G-Sport Ultra High Output Catalytic Converters, which are EPA-registered and fully OBD2 compliant (excluding California). Utilizing proprietary precious metal loading, these 400-cell catalysts reach operational efficiency within just 9 seconds of startup, drastically reducing emissions and eliminating the raw fuel smell common with catless systems. Hand-made in Miami, FL, and constructed from heavy-duty 304 stainless steel, these downpipes provide a durable, high-quality performance upgrade that integrates seamlessly with factory mounting points. Key Features: EPA Registered & Compliant: 49-state legal and fully OBD2 compliant for 1996+ vehicles. Cast Stainless V-Bands: Features precision-casted upper V-bands for a perfect, leak-free seal to the turbochargers. Reduced Radiant Heat: Lowering backpressure helps pull heat away from the turbochargers and engine components. Precision Fabrication: Meticulously TIG welded and test-fitted on a dedicated G90 M5 fixture. Standard-Setting Reliability: The 304 stainless substrate is furnace-braised to the mantle for outstanding resistance to vibration. Specifications: SKU: 11-142. Inlet Type: Precision Casted Stainless V-Band. Substrate: Metal core 400 CPSI catalyst. Warranty: 5-year/50,000-mile warranty on shell/tube ends; 2-year/25,000-mile on catalyst core (void if excessive burble tune is used). Manufacturing: Made in Miami, Florida, USA. Vehicle Fitment: 2025+ BMW M5 (G90 Sedan and G99 Touring) with the S68 V8 Hybrid engine.

Show More Show Less

G87 M2 Valve Rear Axle-Back Exhaust - Carbon Over Black Chrome Tips ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:45483615

Part#: 11-119CB

Ships in 3 Business Days

$ 3,199.00 USD

Add to Wish List

Qty

$ 3,199.00 USD

Add to Wish List

Active Autowerke’s G8X Valved Rear Exhaust section is the result of over 40 years of BMW-specific R&D. While the primary goal is a superior sound signature, the engineering team focused heavily on optimum exhaust flow and weight reduction. By replacing the dense factory muffler assembly with a streamlined stainless steel unit, this exhaust reduces weight hanging off the rear of the car while maximizing exhaust gas scavenging. The internal geometry is designed to provide a smooth transition of gases, which is critical for maintaining turbocharger efficiency on high-horsepower builds. Key Features: OEM+ Integration: Reuses the stock BMW valve actuators, meaning no extra wiring, controllers, or dash errors. Resonance Control: Internal muffler chambers are tuned to eliminate cabin drone while allowing the S58 character to shine under load. Industrial Durability: Full 304 Stainless Steel construction ensures maximum resistance to heat cycles and corrosion. Fitment Guaranteed: Every exhaust is test-fitted on an in-house G8X fixture as part of a rigorous quality control measure. Specifications & Tip Options: Configuration: Valved Axle-back (Connects to factory or aftermarket mid-pipes) Installation: Bolt-on design; includes all necessary heavy-duty clamps and hardware Available Tip Styles: Brushed Stainless Steel Matte Black Coated Genuine Carbon Fiber Vehicle Fitment: * 2021+ BMW M3 Sedan (G80) 2021+ BMW M4 Coupe (G82) 2021+ BMW M4 Convertible (G83)

Show More Show Less

Active Autowerke S63 N63 A-Flow Catted Downpipes

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For 2014+ model years only

T#:51075079

Part#: 11-041A

Ships in 3 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

For the BMW owner seeking increased performance without the drawbacks of a "catless" system, the Active Autowerke Aflow Catted Downpipes offer the perfect solution. These downpipes feature high-flow metallic catalytic converters that are specifically designed to maintain exhaust efficiency while preventing the dreaded Check Engine Light (CEL). Unlike track-only pipes that can produce raw fuel odors and cabin drone, the Aflow series maintains a sophisticated, refined exhaust note suitable for a luxury daily driver. Each set is custom-made in-house to ensure an exact bolt-on fit, providing a reliable solution that satisfies both the driver’s demand for power and the vehicle’s onboard diagnostic requirements. Key Features: No CEL Guarantee: Advanced Aflow catalyst technology prevents catalytic efficiency dashboard warnings. Refined Exhaust Note: Provides an aggressive V8 growl while maintaining cabin comfort for daily use. Bolt-On Installation: No cutting or welding required; replaces the bulky factory units directly. Thermal Resilience: Built to withstand the high temperatures generated by the S63 and N63 twin-turbo engines. Safe for Occupants: Reduces harmful emissions and raw exhaust odors compared to catless alternatives. Specifications: Primary Material: Brushed 304 Stainless Steel Fitting: Direct OEM Replacement (Bolt-on) Manufacturing Location: Hand-made in Miami, FL Weight Reduction: Lighter than the heavy, ceramic-core factory catalytic converters Surface Finish: Natural Stainless Lead Time: Custom made-to-order (Approx. 2 weeks)

Show More Show Less

Active Autowerke GESI Catted Downpipe - B58N

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Model Years 2024+ - Please call in with vin prior to purchase

T#:51320821

Part#: 11-062N

Ships in 10 Business Days

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

For the owner of a late-model BMW who demands a balance of high-end performance and sophisticated daily drivability, Active Autowerke offers the B58N Gen-3 GESI Catted Downpipe. Built with a focus on long-term reliability and environmental standard compliance, this downpipe features an EPA-registered GESI G-Sport catalytic converter. These 400-cell metallic substrates are furnace-braised to the mantle, offering outstanding resistance to thermal shock and vibration. The industrial-grade 304 stainless steel construction ensures the downpipe will withstand years of heat cycles without degrading. This system is a true "plug-and-play" solution that enhances the B58's deep, throaty exhaust note while keeping emissions levels in check and the dashboard clear of errors. Key Features: 49-State Legal: Features an EPA-registered catalyst that is fully OBD2 compliant (excludes vehicles registered in CA). Superior Durability: Constructed entirely from heavy-duty 304 stainless steel with a brushed finish. Proprietary Catalyst Loading: Precious metal technology ensures the reduction of harmful emissions and eliminates raw fuel odors. OEM+ Fitment: Meticulously test-fitted on a dedicated fixture to guarantee a perfect seal with factory turbo and exhaust connections. Comprehensive Kit: Available with an optional turbo flange gasket to ensure a fresh, leak-free installation. Specifications: Type: Signature Series Valved GESI Catted Downpipe. SKU: 11-062N. Catalyst Rating: Rated for high-output applications while maintaining operational efficiency. Hardware: Includes lower mounting brackets and necessary flex section. Vehicle Fitment (US Models Only): * 2025+ BMW X3 40i / X3-M50i (G45) 2025+ BMW X5 40i (G05 LCI) / X7 40i (G07 LCI) 2025+ BMW 540i (G60) / 740i (G70)

Show More Show Less

M340i Valved Rear Exhaust W Carbon Tips

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51110154

Part#: 11-089C

Ships in 10 Business Days

$ 2,374.99 USD

Add to Wish List

Qty

$ 2,374.99 USD

Add to Wish List

Awaken the B58: Active Autowerke G20 M340i / G22 M440i Valved Axle-Back Exhaust From the factory, the G-series M340i and M440i are notoriously quiet, leaving the sonorous B58 inline-six feeling a bit muffled. Active Autowerke’s valved rear exhaust is the solution for enthusiasts who want to bridge the gap between "daily driver" and "motorsport-inspired." This axle-back system was engineered to replace the lackluster stock muffler with a high-flow, 304 stainless steel unit that captures a deep, hearty growl worthy of the BMW 'M' badge. By reusing the factory valve actuator, this system keeps your driving modes functional—providing a refined tone for the commute and a rowdy, unrestricted bark when you’re in the mood to let it rip. It’s the perfect "OEM+" upgrade that delivers the aggressive sound your BMW should have arrived with. Engineering & Tone Active Autowerke spent months fine-tuning the resonance of this system to ensure it provides a low-frequency rumble without the high-pitched rasp found in cheaper alternatives. Valved Versatility: Retains full integration with your factory BMW drive modes (Eco, Comfort, Sport). High-Flow Design: Maximizes exhaust gas scavenging for improved throttle response and midrange punch. Aggressive Styling: Available with quad tips to fill out the rear diffuser and provide a menacing track-ready look. Key Features: Hand-Built Quality: Fabricated in the USA from premium T304 Stainless Steel. Precision Fitment: Every unit is test-fitted on a dedicated G-series fixture to guarantee a perfect bolt-on install. Motorsport-Inspired Sound: Replaces the whisper-quiet factory muffler with a deep, throaty signature note. All-Inclusive Kit: Includes all necessary clamps and hardware for a straightforward installation. Specifications: Material: Mandrel-bent 304 Stainless Steel Type: Valved Axle-Back (Requires cutting of factory mid-pipe for installation) Valve Operation: Compatible with OEM BMW actuator Vehicle Fitment: * 2019+ BMW M340i / M340i xDrive (G20) 2021+ BMW M440i / M440i xDrive (G22/G23/G26)

Show More Show Less

Active Autowerke Full Exhaust System (Black Tips) - A90 Supra ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Please call in with VIN before purchase

T#:51426479

Part#: 11-565B

Ships in 10 Business Days

$ 2,127.00 USD

Add to Wish List

Qty

$ 2,127.00 USD

Add to Wish List

Performance Meets Precision: The Active Autowerke A90 Supra Exhaust Building on three decades of BMW tuning expertise, Active Autowerke is proud to offer a premium exhaust solution for the A90 Supra. This system utilizes a massive 3.5-inch midpipe to maximize exhaust flow, resulting in documented gains of 12–15 horsepower across the entire RPM range. Premium Construction: Fully 304 brushed stainless steel with Torca-style clamps for a leak-free seal. OEM Integration: Retains factory valve functionality for adjustable sound levels. Custom Fit: Includes height-adjustable brackets to ensure perfect alignment during installation. Signature Style: Features 100mm embossed, double-walled tips for a bold rear profile. Option 3: Short & Direct (Best for a "Quick Specs" box) Upgrade your A90 Supra with Active Autowerke’s Signature Single-Exit Exhaust. Proven Power: +12–15 HP and increased torque. Maximum Flow: 3.5" stainless steel midpipe. Valved Control: Keep your factory "stealth" mode for long hauls or early starts. Durability: 100% 304 brushed stainless steel construction. Easy Install: Height-adjustable brackets and high-quality Torca clamps included. Key Improvements Made: Flow: Changed "3-1/2" to "3.5-inch" for better readability. Benefits-First: Highlighted the HP gains and the factory valve retention, as these are the biggest selling points for Supra owners. Professionalism: Cleaned up the "100% 304 stainless steel" phrasing to sound more authoritative.

Show More Show Less

Active Autowerke Catted Downpipes - F10/F12 M5/M6 S63

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51075064

Part#: 11-093

Ships in 3 Business Days

$ 2,849.00 USD

Add to Wish List

Qty

$ 2,849.00 USD

Add to Wish List

The Active Autowerke Signature GESI Catted Downpipes offer the perfect balance of raw performance and street-legal refinement. Unlike "catless" alternatives that cause unpleasant fuel odors and dashboard error lights, this system utilizes EPA-registered GESI high-flow catalytic converters. These proprietary converters use precious metal loading technology to significantly reduce emissions, ensuring your BMW remains OBD2 compliant and "Check Engine Light" free. Designed as a direct bolt-on replacement for F-Chassis BMW X5M, X6M, and 550i/650i models, these downpipes feature cast upper stainless steel V-bands for a factory-perfect seal. Whether you are cruising or under wide-open throttle, the system maintains a sophisticated exhaust note while safely protecting both passengers and the environment from harmful fumes. Key Features: NO CEL Guarantee: Advanced GESI technology ensures no catalytic efficiency codes under normal operation. Refined Sound & Scent: Eliminates the "raw fuel" odor associated with track-only downpipes. 49-State Legal: EPA registered and fully OBD2 compliant (excludes California). Precision Fitment: Cast upper V-bands ensure a leak-free connection to the turbo housing. OEM Integration: Easily bolts on with no cutting, welding, or permanent vehicle modification required. Specifications: Construction: Heavy-duty 304 Stainless Steel Inlet Connection: Precision-cast V-Band flange Catalyst Size: 4.5-inch Ultra High Flow unit Efficiency: Reaches full efficiency in under 10 seconds from cold start Compliance: Fully OBD2 compliant (1996 and newer vehicles) Application Note: Requires VIN for fitment verification; not compatible with G-chassis N63B engines.

Show More Show Less

F87 M2 Competition Mid Pipe - W/ Resonators

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20749244

Part#: 11-050R

Ships in 3 Business Days

$ 949.99 USD

Add to Wish List

Qty

$ 949.99 USD

Add to Wish List

Active Autowerke has been an industry leader in engineering high quality BMW performance products for over 30 years. Dedicated to improving performance with the highest quality products, Active Autowerke is synonymous with making power. Our philosophy on developing refined BMW performance parts, with power in mind, and providing them to a large BMW community can be best characterized by our F87 mid pipe – a valuable addition to our M2C BMW collection. The Active Autowerke F87 Mid Pipe was specifically designed to eliminate the highly restrictive nature of the S55 – thus creating optimal exhaust flow and drastically improving performance. In addressing the annoying sound ( described by many like that of a weed-eater ) we needed to better understand the issue. After much research and testing we discovered the synchronization of the Turbos as the main factor in the sound. The solution was a single mid pipe which eliminated much of the annoying sound. The next challenge was making a large 3.5" pipe ( needed for optimum performance ) fit without ground clearance issues - thus the oval pipe. Engineered for an exact fit on the new BMW M2 Competition, the difference in power with this mid pipe will be noticeable the moment it is installed! Key Features 18+ WHP over stock* 30+ LB-FT over stock* Improved performance from less back pressure Deeper & throatier exhaust note Less restrictive, more free flowing Lighter weight than factory system Quicker turbo spool Increased low end and mid-range power Single-pipe design eliminates cheap “weed-eater” sound from factory exhaust * Performance gains when paired with Active Autowerke F8X Rear Exhaust Section

Show More Show Less

Downpipes W Active A-flow Cats - F10/F12 M5/M6

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51110145

Part#: 11-093A

Ships in 3 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

Efficiency in a forced-induction engine is determined by the pressure differential across the turbine wheel. Active Autowerke's Aflow Catted Downpipes maximize this differential by utilizing a streamlined, low-restriction design. Each set is hand-made from premium 304 stainless steel and features furnace-braised substrates for maximum longevity under the extreme temperatures of the "hot-V" turbo configuration. The integrated 400-cell catalytic converters reach operational efficiency within just 9 seconds of startup, ensuring the system meets modern OBD2 requirements while supporting up to 800 HP without a loss in performance. Key Features: Precision Fitment: Each unit is meticulously TIG-welded and checked against master jigs to guarantee a perfect bolt-on installation with no cutting or welding. EPA Compliant: 49-state EPA registered and fully OBD2 compliant (Excludes California). Thermal Management: Engineered to reduce radiant heat in the engine bay compared to restrictive factory units. High-Flow Catalyst Substrate: 304 stainless steel substrate furnace-braised to the mantle for outstanding vibration and heat resistance. Comprehensive Protection: Covered by a 5-year/50,000-mile structural warranty and a 2-year core warranty. Specifications: Inlet Type: Precision-casted 3.5" Stainless Steel V-Band Outlet Diameter: 3.0" Mandrel-Bent Tubing Catalyst Matrix: 400 Cells Per Square Inch Operating Temperature: Tested to withstand up to 1,500°F Vehicle Fitment: * 2011–2016 BMW M5 (F10) 2012–2018 BMW M6 Coupe / Convertible / Gran Coupe (F12/F13/F06) Custom Build Time: Typically made-to-order (Approx. 2-week lead time)

Show More Show Less

Signature Exhaust Muffler With Dual Tips - Black Tips

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50934284

Part#: 11-025B

Ships in 3 Business Days

$ 797.00 USD

Add to Wish List

Qty

$ 797.00 USD

Add to Wish List

The Active Autowerke BMW F30 328I signature exhaust is located in a class all of its own. This product is a must for any enthusiast searching for true performance, added durability and an attractive weight advantage when it comes to the F30 328I performance signature exhaust. This system is constructed from 100% polished 304-stainless steel and features adjustable 80 mm double walled tips, making it ideal both for two-door and four-door models (which also allows for cleaner fitment with diffusers). This BMW F30 exhaust delivers everything we know you would want in a performance exhaust: eye-catching style, a sophisticated yet aggressive tone, weight savings, and – most importantly – measurable horsepower performance gains! This muffler turns your 328I exhaust tone into a sporty but mellow tone that is not only exhilarating but non obtrusive on your ears. The factory counterpart weighs 29 lbs. while the Active Autowerke Signature exhaust weighs only a mere 19 lbs. Weight savings are not the only attributes, this 328I performance exhaust has a modular design with its v-band clamps that makes fitment a snap. A revelation in BMW tuning. On the in-house Active Autowerke Mustang dyno, their otherwise 100% stock 2013 328I test mule spun the rollers to the tune of an extra 9 RWHP, and 13 LB-FT of torque…from “just” a quality muffler upgrade. Turbos love to exhale, and we are very anxious to continue to unearth just how much extra power is hiding in the stock exhaust system. FEATURES: Larger diameter mandrel bent piping for maximum flow Durable, polished 100% 304 stainless steel Double-walled 80 mm signature stainless tips Adjustable tips with embossed Active Autowerke logo on the dual tip model Improved power & torque throughout entire RPM band Actual dyno measure results with gains of 10 + WHP over stock configuration Weighs 19 lbs. vs. the factory of 29 lbs. Fitment for coupe, convertible and sedans Complete illustrated instruction manual Two year limited warranty included NOTE: Exhaust system requires cutting of the factory pipe for installation. Dimensions and cutting measurements are included in the instructions. Fits F30 328i models with the N20 engine.

Show More Show Less

Active Autowerke Valve Rear Axle-Back Exhaust (Carbon Tips) - G90/G99...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285656

Part#: 11-141C

Ships in 3 Business Days

$ 4,369.00 USD

Add to Wish List

Qty

$ 4,369.00 USD

Add to Wish List

For the owner of the new G90 M5, the Active Autowerke Signature Catback System offers the perfect balance of luxury refinement and aggressive performance. Constructed entirely from corrosion-resistant T304 stainless steel, this system is built to withstand extreme thermal loads while maintaining a lifetime of consistent finish. The engineering team focused heavily on "Sound Engineering," ensuring that while the exhaust is louder and deeper than stock, it remains completely free of interior cabin drone—a critical requirement for the high-end M5 experience. With its direct-fit installation and a variety of 112mm quad tip finishes, this exhaust provides a surgical fit and a premium upgrade that complements the caliber of the world’s most powerful M-sedan. Key Features: USA Fabricated: Hand-made in Miami, FL, using precision TIG welding and master fixtures for a guaranteed fit. Daily Driveability: Tuned for a clean, sophisticated idle and low-drone cruising, ideal for long highway trips. Advanced Material Science: T304 Stainless construction offers superior heat resistance and long-term durability. Inclusive Hardware Kit: Includes all clamps, gaskets, and valve motor brackets required for a seamless install. Enhanced Visuals: Quad 112mm dual-wall tips are designed to resist heat discoloration and fill out the bumper cutouts. Specifications: System Type: Valved Full Catback Exhaust Tubing: Mandrel-bent for zero-turbulence exhaust gas flow Valve Operation: Independent remote-controlled electronic valves Performance Gain: +20–25 lb-ft torque (Estimated) Vehicle Fitment: 2025+ BMW M5 (G90 Sedan and G99 Touring) Tip Options: Brushed Stainless Matte Black Carbon Fiber

Show More Show Less

Active Autowerke G87 Valved Rear Exhaust W Carbon Tips (100mm) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285650

Part#: 11-119C

Ships in 3 Business Days

$ 2,944.00 USD

Add to Wish List

Qty

$ 2,944.00 USD

Add to Wish List

Active Autowerke’s G8X Valved Rear Exhaust section is the result of over 40 years of BMW-specific R&D. While the primary goal is a superior sound signature, the engineering team focused heavily on optimum exhaust flow and weight reduction. By replacing the dense factory muffler assembly with a streamlined stainless steel unit, this exhaust reduces weight hanging off the rear of the car while maximizing exhaust gas scavenging. The internal geometry is designed to provide a smooth transition of gases, which is critical for maintaining turbocharger efficiency on high-horsepower builds. Key Features: OEM+ Integration: Reuses the stock BMW valve actuators, meaning no extra wiring, controllers, or dash errors. Resonance Control: Internal muffler chambers are tuned to eliminate cabin drone while allowing the S58 character to shine under load. Industrial Durability: Full 304 Stainless Steel construction ensures maximum resistance to heat cycles and corrosion. Fitment Guaranteed: Every exhaust is test-fitted on an in-house G8X fixture as part of a rigorous quality control measure. Specifications & Tip Options: Configuration: Valved Axle-back (Connects to factory or aftermarket mid-pipes) Installation: Bolt-on design; includes all necessary heavy-duty clamps and hardware Available Tip Styles: Brushed Stainless Steel Matte Black Coated Genuine Carbon Fiber Vehicle Fitment: * 2021+ BMW M3 Sedan (G80) 2021+ BMW M4 Coupe (G82) 2021+ BMW M4 Convertible (G83)

Show More Show Less

Signature Exhaust Muffler With Dual Black Tips - Generation 2 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:36574532

Part#: 11-026B

Ships in 3 Business Days

5% off MSRP $ 839.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 797.99 USD

Add to Wish List

Qty

5% off MSRP

$ 839.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 797.99 USD

Add to Wish List

Active Autowerke Signature Active Aflow Catted Downpipe - A90/A91 Sup...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Please call in with VIN before purchase

T#:51426472

Part#: 11-564A

Ships in 10 Business Days

$ 1,399.00 USD

Add to Wish List

Qty

$ 1,399.00 USD

Add to Wish List

For Supra owners who demand professional-grade performance without the legal and olfactory drawbacks of a catless system, Active Autowerke incorporates the industry's most advanced catalytic technology. This downpipe uses either the GESi G-Sport UHO or the Active Aflow catalyst, both of which are EPA registered and 49-state legal. These catalysts reach operational efficiency within just 9 seconds of startup, ensuring that your vehicle remains OBD2 compliant during emissions testing. By eliminating the "Check Engine Light" without the use of O2 spacers or software hacks, this downpipe remains a reliable choice for street-driven vehicles that see frequent track use. Key Features OBD2 Compliance: Fully compliant with onboard diagnostic systems (1996 and newer) for a worry-free ownership experience. 400 Cell Substrate: Strikes the perfect balance between high-velocity exhaust flow and effective emissions reduction. Thermal Efficiency: Rapid light-off time (approx. 9 seconds) ensures the cat is functioning almost immediately upon engine start. Durability: Substrate is furnace-brazed to the mantle, preventing the internal core from shifting or breaking under high-boost vibration. Miami Made: Proudly designed and hand-built in Miami, Florida, ensuring high-tier American manufacturing quality. Specifications Vehicle Fitment: 2020–2024 Toyota Supra (A90/A91) 3.0L B58 Engine. Catalyst Type: 4.5" GESi UHO-Series Gen 2 / Active Aflow. Cell Density: 400 Cells Per Square Inch. Taper Profile: 4.5" Turbo Connection → 3.5" Flex Section → 80mm OEM Outlet. Warranty: 5-Year / 50,000-Mile warranty on the shell/ends; 2-Year / 25,000-Mile on the catalyst core. Legal Status: EPA Compliant (49-State Legal; Not CARB registered for California).

Show More Show Less

G4X BMW M240i Valved Rear Axle-back Exhaust (Brushed Tips) - G4X M240...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285636

Part#: 11-125

Ships in 3 Business Days

$ 1,899.00 USD

Add to Wish List

Qty

$ 1,899.00 USD

Add to Wish List

For over 40 years, Active Autowerke has been at the forefront of BMW performance, and the G4X M240i axle-back exhaust represents the pinnacle of that development. This system is constructed entirely from TIG-welded 304 stainless steel, offering maximum resistance to corrosion and heat cycles. Unlike universal systems, this exhaust is engineered specifically for the G42 chassis, ensuring that every hanger and flange aligns perfectly. By retaining the factory valve control, this exhaust offers a "no-compromise" solution: it stays quiet and sophisticated when you need it, but opens up for maximum volume and performance when you want it. Each kit is a comprehensive package, providing all hardware required to transform your M240i’s rear section. Key Features: Surgical Precision: Every unit is test-fitted on a dedicated fixture to ensure zero-clearance issues with the chassis or diffuser. Premium Materials: Full 304 Stainless Steel construction ensures a lifetime of performance. OEM Integration: No need for extra wiring or controllers; works seamlessly with your car's computer. Aggressive Rear Stance: Fills the rear bumper cutouts more effectively than the stock rectangular tips. Performance Gains: Improved exhaust scavenging contributes to a more responsive B58 engine. Specifications: Type: Valved Rear Axle-back Exhaust Section SKU: 11-125 Finish: Brushed Stainless (Standard) Hardware: Includes all high-grade connecting hardware Vehicle Fitment: * 2022+ BMW M240i / M240i xDrive (G42 Chassis) Custom Options: Available in multiple tip finishes to match your specific trim package

Show More Show Less

Active Autowerke Full Exhaust System (Carbon Tips) - A90 Supra ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Please call in with VIN before purchase

T#:51426480

Part#: 11-565C

Ships in 10 Business Days

$ 2,374.00 USD

Add to Wish List

Qty

$ 2,374.00 USD

Add to Wish List

Performance Meets Precision: The Active Autowerke A90 Supra Exhaust Building on three decades of BMW tuning expertise, Active Autowerke is proud to offer a premium exhaust solution for the A90 Supra. This system utilizes a massive 3.5 inch midpipe to maximize exhaust flow, resulting in documented gains of 12 to 15 horsepower across the entire RPM range. Premium Construction: Fully 304 brushed stainless steel with Torca style clamps for a leak-free seal. OEM Integration: Retains factory valve functionality for adjustable sound levels. Custom Fit: Includes height-adjustable brackets to ensure perfect alignment during installation. Signature Style: Features 100mm embossed double-walled carbon fiber tips for a bold rear profile. Option 3: Short & Direct (Best for a "Quick Specs" Box) Upgrade your A90 Supra with Active Autowerke’s Signature Single-Exit Exhaust. Proven Power: Increases of 12 to 15 horsepower and improved torque. Maximum Flow: Large 3.5 inch stainless steel midpipe. Valved Control: Keep your factory stealth mode for long hauls or early starts. High-End Finish: 100mm signature carbon fiber tips with embossed logo. Easy Install: Height-adjustable mounting brackets and high-quality Torca clamps included.

Show More Show Less

Active Autowerke Performance Valved Rear Exhaust - Generation 2 - Bla...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Does Not Fit 440 Gran Coupe

T#:51039947

Part#: 11-115FC

Ships in 3 Business Days

$ 1,377.00 USD

Add to Wish List

Qty

$ 1,377.00 USD

Add to Wish List

Dial In B58 Sound and Performance — the Turner Way Looking for a noticeable bump in sound and flow without replacing the entire exhaust system? The Active Autowerke Gen 2 Rear Exhaust for B58-powered BMW models delivers meaningful gains in a clean, well-engineered package. This rear section focuses on improving exhaust efficiency and tone while maintaining the refinement and daily usability expected from a properly sorted BMW. At the heart of the system is a straight-through muffler design that reduces backpressure versus the restrictive factory unit. The result is improved horsepower and torque, particularly through the midrange where the B58 responds best. With the factory valve open, the exhaust produces a more aggressive sport tone. Close the valve and the sound remains controlled and comfortable for everyday driving. Construction is centered on durability and proper fit. Large mandrel-bent tubing and a brushed 304 stainless steel body provide long-term corrosion resistance and consistent flow. Double-walled signature tips — available in brushed, black, or carbon stainless — finish the rear with a clean, purposeful appearance. Installation is straightforward thanks to height-adjustable mounting brackets and the inclusion of a heavy-duty TORCA-style clamp, known for its strong sealing capability and secure fitment. Independent testing shows gains of approximately 12–15 horsepower over stock while reducing overall weight compared to the factory rear exhaust. Product Highlights Straight-through muffler design for improved exhaust flow Retains factory exhaust valve functionality Large mandrel-bent piping supports increased performance Constructed from 100% brushed 304 stainless steel Double-walled tips available in brushed, black, or carbon finishes Adjustable tips with embossed Active Autowerke branding Noticeable horsepower and torque improvements across the RPM range Approximate gains of 12–15 HP over stock TORCA-style clamp provides a secure, leak-resistant connection Height-adjustable mounting brackets ease installation Weight reduction versus factory exhaust (22.0 lbs vs. 27.0 lbs) Includes illustrated installation instructions Covered by a two-year warranty Fitment BMW F30 340i / 340i xDrive (Sedan) — 2013+ BMW F32 440i / 440i xDrive (Coupe) — 2013+ BMW F33 440i / 440i xDrive (Convertible) — 2013+ A well-balanced upgrade for enthusiasts who want stronger sound, measurable performance gains, and OEM-like fit and function without unnecessary complexity.

Show More Show Less

Active Autowerke Performance Valved Rear Exhaust - GEN 2 - Carbon Tip...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:18534634

Part#: 11-115TC

Ships in 3 Business Days

$ 1,376.99 USD

Add to Wish List

Qty

$ 1,376.99 USD

Add to Wish List

True BMW performance, durability, and attractive weight advantages with innovative features places the Active Autowerke BMW F22 235i exhaust in a class of its own. And now Active Autowerke has developed Gen 2 of this model which has been enhanced to take advantage of the OEM valve system. This system is constructed from 100% Brushed 304-stainless steel and features adjustable brushed, black or carbon Active Autowerke double-walled tips, making it ideal both for 2-door and 4-door models. And now the improved sound becomes more pronounced when the valve is opened by the ECU. Rather than creating a complete exhaust system, Active Autowerke opted for a compact design built in a smaller package to deliver more value. The Active Autowerke F22 235i Gen 2 BMW Rear Exhaust System provides an increase in horsepower, better sound and appearance making it the choice for the avid BMW enthusiast. The system is a straight-through design providing substantial improvements to gas flow over the factory exhaust. Our innovative muffler can design provides maximum volume with the exhaust valve open for a true sport sound. This exhaust delivers a wide-open sound, a solid 15+hp boost, and key gains in the midrange with the valve open while the sound comes out non-intrusive with a rich mellow tone with the valve closed. Just like replacing the BMW factory rear exhaust, the Active Autowerke BMW Performance rear exhaust does it in much the same way, if not better by using a much beefier, heavy-duty TORCA-style exhaust clamp. TORCA clamps are known for their strength and sealing capabilities to make that tight seal. Other features like height-adjustable mounting tabs make this exhaust easy to install. Key Features: Large mandrel bent piping for maximum flow Uses factory valve system for maximum exhaust sound Durable, Brushed 100% 304 stainless steel for durability Double-walled signature brushed, black or carbon stainless tips Adjustable Tips with Embossed Active Autowerke Logo Improved power & torque throughout entire RPM band Gains of 12-15 HP over stock configuration Tight seal with use of TORCA style exhaust clamps Height adjustable mounting brackets make installation easy Factory curb weight 27.0 Lbs, Active 335i weighs 22.0 Lbs Fitment for Coupe & Convertible Complete illustrated instruction manual Two year warranty Installation Instructions: http://images.activeautowerke.com/Installation%20PDF's/F2X_M235_Rear_Exhaust_Installtion.pdf

Show More Show Less

Active Autowerke Performance Valved Rear Exhaust - Generation 2 - Bla...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Does Not Fit 440 Gran Coupe

T#:51039946

Part#: 11-115FB

Ships in 3 Business Days

$ 1,177.00 USD

Add to Wish List

Qty

$ 1,177.00 USD

Add to Wish List

Dial In B58 Sound and Performance — the Turner Way Looking for a noticeable bump in sound and flow without replacing the entire exhaust system? The Active Autowerke Gen 2 Rear Exhaust for B58-powered BMW models delivers meaningful gains in a clean, well-engineered package. This rear section focuses on improving exhaust efficiency and tone while maintaining the refinement and daily usability expected from a properly sorted BMW. At the heart of the system is a straight-through muffler design that reduces backpressure versus the restrictive factory unit. The result is improved horsepower and torque, particularly through the midrange where the B58 responds best. With the factory valve open, the exhaust produces a more aggressive sport tone. Close the valve and the sound remains controlled and comfortable for everyday driving. Construction is centered on durability and proper fit. Large mandrel-bent tubing and a brushed 304 stainless steel body provide long-term corrosion resistance and consistent flow. Double-walled signature tips — available in brushed, black, or carbon stainless — finish the rear with a clean, purposeful appearance. Installation is straightforward thanks to height-adjustable mounting brackets and the inclusion of a heavy-duty TORCA-style clamp, known for its strong sealing capability and secure fitment. Independent testing shows gains of approximately 12–15 horsepower over stock while reducing overall weight compared to the factory rear exhaust. Product Highlights Straight-through muffler design for improved exhaust flow Retains factory exhaust valve functionality Large mandrel-bent piping supports increased performance Constructed from 100% brushed 304 stainless steel Double-walled tips available in brushed, black, or carbon finishes Adjustable tips with embossed Active Autowerke branding Noticeable horsepower and torque improvements across the RPM range Approximate gains of 12–15 HP over stock TORCA-style clamp provides a secure, leak-resistant connection Height-adjustable mounting brackets ease installation Weight reduction versus factory exhaust (22.0 lbs vs. 27.0 lbs) Includes illustrated installation instructions Covered by a two-year warranty Fitment BMW F30 340i / 340i xDrive (Sedan) — 2013+ BMW F32 440i / 440i xDrive (Coupe) — 2013+ BMW F33 440i / 440i xDrive (Convertible) — 2013+ A well-balanced upgrade for enthusiasts who want stronger sound, measurable performance gains, and OEM-like fit and function without unnecessary complexity.

Show More Show Less

Active Autowerke Performance Valved Rear Exhaust - Generation 2 - Bru...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Does Not Fit 440 Gran Coupe

T#:51039945

Part#: 11-115F

Ships in 3 Business Days

$ 1,139.00 USD

Add to Wish List

Qty

$ 1,139.00 USD

Add to Wish List

Dial In B58 Sound and Performance — the Turner Way Looking for a noticeable bump in sound and flow without replacing the entire exhaust system? The Active Autowerke Gen 2 Rear Exhaust for B58-powered BMW models delivers meaningful gains in a clean, well-engineered package. This rear section focuses on improving exhaust efficiency and tone while maintaining the refinement and daily usability expected from a properly sorted BMW. At the heart of the system is a straight-through muffler design that reduces backpressure versus the restrictive factory unit. The result is improved horsepower and torque, particularly through the midrange where the B58 responds best. With the factory valve open, the exhaust produces a more aggressive sport tone. Close the valve and the sound remains controlled and comfortable for everyday driving. Construction is centered on durability and proper fit. Large mandrel-bent tubing and a brushed 304 stainless steel body provide long-term corrosion resistance and consistent flow. Double-walled signature tips — available in brushed, black, or carbon stainless — finish the rear with a clean, purposeful appearance. Installation is straightforward thanks to height-adjustable mounting brackets and the inclusion of a heavy-duty TORCA-style clamp, known for its strong sealing capability and secure fitment. Independent testing shows gains of approximately 12–15 horsepower over stock while reducing overall weight compared to the factory rear exhaust. Product Highlights Straight-through muffler design for improved exhaust flow Retains factory exhaust valve functionality Large mandrel-bent piping supports increased performance Constructed from 100% brushed 304 stainless steel Double-walled tips available in brushed, black, or carbon finishes Adjustable tips with embossed Active Autowerke branding Noticeable horsepower and torque improvements across the RPM range Approximate gains of 12–15 HP over stock TORCA-style clamp provides a secure, leak-resistant connection Height-adjustable mounting brackets ease installation Weight reduction versus factory exhaust (22.0 lbs vs. 27.0 lbs) Includes illustrated installation instructions Covered by a two-year warranty Fitment BMW F30 340i / 340i xDrive (Sedan) — 2013+ BMW F32 440i / 440i xDrive (Coupe) — 2013+ BMW F33 440i / 440i xDrive (Convertible) — 2013+ A well-balanced upgrade for enthusiasts who want stronger sound, measurable performance gains, and OEM-like fit and function without unnecessary complexity.

Show More Show Less

Active Autowerke 90mm Slip on Exhaust Tips - Brushed Stainless Steel ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:397509

Part#: 11-043

In Stock

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

Active Autowerke has released the F87-specific exhaust tips! These 90MM tips replace the small and ugly OEM tips found on the M2.

Active Autowerke’s new exhaust tips were developed specifically for the F87 M2. This allows them to fully conceal the remaining OEM piping.

The tips are fully adjustable, which helps guarantee you’ll find the perfect fitment.

Each kit includes a 10MM exhaust mount bushing ensuring compatibility with any rear diffuser.

Dimensions:

Pipe opening: 70MM
Tip opening: 90MM
Overall length: 119MM
Visible tip length: 90MM

Fits the following vehicles:
2015+ F87 BMW M2

Show More Show Less

Active Autowerke 90mm Slip on Exhaust Tips - Matte Black - F87 M2 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2393416

Part#: 11-043B

In Stock

$ 350.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 350.99

This product was last offered at the strikethrough price on
05-03-2026

$ 327.99 USD

Limited Qty Sale

Add to Wish List

Active Autowerke has released the F87-specific exhaust tips! These 90MM tips replace the small and ugly OEM tips found on the M2.

Active Autowerke’s new exhaust tips were developed specifically for the F87 M2. This allows them to fully conceal the remaining OEM piping.

The tips are fully adjustable, which helps guarantee you’ll find the perfect fitment.

Each kit includes a 10MM exhaust mount bushing ensuring compatibility with any rear diffuser.

Dimensions:

Pipe opening: 70MM
Tip opening: 90MM
Overall length: 119MM
Visible tip length: 90MM

Fits the following vehicles:
2015+ F87 BMW M2

Show More Show Less

Active Autowerke 90mm Slip on Exhaust Tips - Carbon Fiber - F87 M2 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2393418

Part#: 11-043C

Ships in 3 Business Days

$ 712.00 USD

Add to Wish List

Qty

$ 712.00 USD

Add to Wish List

Active Autowerke has released the F87-specific exhaust tips! These 90MM tips replace the small and ugly OEM tips found on the M2.

Active Autowerke’s new exhaust tips were developed specifically for the F87 M2. This allows them to fully conceal the remaining OEM piping.

The tips are fully adjustable, which helps guarantee you’ll find the perfect fitment.

Each kit includes a 10MM exhaust mount bushing ensuring compatibility with any rear diffuser.

Dimensions:

Pipe opening: 70MM
Tip opening: 90MM
Overall length: 119MM
Visible tip length: 90MM

Fits the following vehicles:
2015+ F87 BMW M2

Show More Show Less

Active Autowerke 90mm Exhaust Tips - Brushed - F8X

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Designed for use with Active Autowkere exhaust system - not designed for use with stock BMW exhaust

T#:397511

Part#: 11-044

Ships in 3 Business Days

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

Active Autowerke has released the F87-specific exhaust tips! These 90MM tips replace the small and ugly OEM tips found on the M2.

Active Autowerke’s new exhaust tips were developed specifically for the F87 M2. This allows them to fully conceal the remaining OEM piping.

The tips are fully adjustable, which helps guarantee you’ll find the perfect fitment.

Each kit includes a 10MM exhaust mount bushing ensuring compatibility with any rear diffuser.

Dimensions:

Pipe opening: 70MM
Tip opening: 90MM
Overall length: 119MM
Visible tip length: 90MM

Fits the following vehicles:
2015+ F87 BMW M2

Show More Show Less

OEM Exhaust Tips(Black Chrome) - G8x

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285668

Part#: 11-098BC

Ships in 3 Business Days

$ 619.00 USD

Add to Wish List

Qty

$ 619.00 USD

Add to Wish List

Refined styling meets industrial durability with the Active Autowerke G8X 100mm Exhaust Tips. Constructed from TIG-welded 304 stainless steel, these tips are built to survive the extreme thermal cycles associated with the high-output S58 twin-turbo platform. Designed specifically for the Active Autowerke valved rear exhaust, these tips provide a direct-fit solution that enhances the rear stance of the G87 M2, G80 M3, and G82 M4. With a focus on long-term maintenance and ease of cleaning, each finish is treated to withstand road grime and exhaust soot while maintaining its premium luster. Key Features: Precision Engineering: Specifically developed for the latest generation of Active Autowerke G8X valved rear exhausts. Genuine Carbon Fiber: Carbon variants utilize a real plain-weave carbon sleeve riveted to a double-walled stainless base. Corrosion Resistance: 304 Stainless Steel construction ensures the tips will not rust or degrade over time. Shadowline Compatibility: Multiple finish options allow for a perfect match with BMW’s various exterior trim packages. USA Fabricated: Designed and test-fitted in Miami, FL, to ensure 100% fitment accuracy. Specifications & Tip Options: Inlet/Outlet: 70mm Inlet / 100mm Outlet Construction: TIG-welded 304 Stainless Steel Hardware: Includes all necessary set-screws or clamps for installation Available Finishes: Brushed Stainless Steel Matte Black Coated Carbon Fiber over Brushed Stainless Carbon Fiber over Black Chrome Vehicle Fitment: * 2021+ BMW M3 (G80) / M3 Competition / xDrive 2021+ BMW M4 (G82) / M4 Competition / xDrive 2021+ BMW M4 Convertible (G83) 2023+ BMW M2 (G87)

Show More Show Less

Active Autowerke Exhaust Tips - 90mm - Carbon Tips

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51075057

Part#: 11-044C

Ships in 3 Business Days

$ 721.00 USD

Add to Wish List

Qty

$ 721.00 USD

Add to Wish List

Fill Out Your Diffuser: Active Autowerke 90mm F87 M2 Exhaust Tips Let’s face it—the factory tips on the BMW F87 M2 are a bit of an afterthought. They’re small, they sit too far back, and they leave far too much of the ugly OEM piping exposed. If you’ve added an aggressive carbon fiber diffuser, those puny stock tips look even more out of place. Active Autowerke has the solution. These 90mm F87-specific tips are engineered specifically to fix the M2's rear-end aesthetics. By bumping the diameter up to 90mm, these tips provide the muscular, "filled-out" look the M2 should have had from the factory. Dial In Your Fitment One size does not fit all when it comes to style. These tips are fully adjustable, allowing you to choose exactly how much "poke" you want. Whether you prefer a flush, tucked look or an aggressive staggered setup that follows the curve of your bumper, these tips make it happen. To ensure they play nice with any aftermarket rear diffuser, Active Autowerke includes a 10mm exhaust mount bushing in every kit. This gives you the necessary clearance to prevent melting or vibrating against your expensive carbon fiber bodywork. Construction & Specs Available in a variety of finishes to match your build—from classic Brushed Stainless to stealthy Matte Black and sophisticated Carbon Fiber—each tip is built to withstand the heat and grime of daily driving while staying easy to clean. Tip Opening: 90mm (Massive upgrade over stock) Inlet Size: 70mm Overall Length: 119mm Engineering: Specifically designed to conceal internal OEM piping for a seamless look.

Show More Show Less

Active Autowerke OEM Exhaust Tips(Brushed) - G8x

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285666

Part#: 11-098

Ships in 3 Business Days

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Refined styling meets industrial durability with the Active Autowerke G8X 100mm Exhaust Tips. Constructed from TIG-welded 304 stainless steel, these tips are built to survive the extreme thermal cycles associated with the high-output S58 twin-turbo platform. Designed specifically for the Active Autowerke valved rear exhaust, these tips provide a direct-fit solution that enhances the rear stance of the G87 M2, G80 M3, and G82 M4. With a focus on long-term maintenance and ease of cleaning, each finish is treated to withstand road grime and exhaust soot while maintaining its premium luster. Key Features: Precision Engineering: Specifically developed for the latest generation of Active Autowerke G8X valved rear exhausts. Genuine Carbon Fiber: Carbon variants utilize a real plain-weave carbon sleeve riveted to a double-walled stainless base. Corrosion Resistance: 304 Stainless Steel construction ensures the tips will not rust or degrade over time. Shadowline Compatibility: Multiple finish options allow for a perfect match with BMW’s various exterior trim packages. USA Fabricated: Designed and test-fitted in Miami, FL, to ensure 100% fitment accuracy. Specifications & Tip Options: Inlet/Outlet: 70mm Inlet / 100mm Outlet Construction: TIG-welded 304 Stainless Steel Hardware: Includes all necessary set-screws or clamps for installation Available Finishes: Brushed Stainless Steel Matte Black Coated Carbon Fiber over Brushed Stainless Carbon Fiber over Black Chrome Vehicle Fitment: * 2021+ BMW M3 (G80) / M3 Competition / xDrive 2021+ BMW M4 (G82) / M4 Competition / xDrive 2021+ BMW M4 Convertible (G83) 2023+ BMW M2 (G87)

Show More Show Less

Rear Exhaust Tips For Active Exhausts (Brushed) - G8x

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285661

Part#: 11-094

Ships in 3 Business Days

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Refine the rear profile of your BMW with Active Autowerke’s G8X-specific 100mm exhaust tips. These tips are built to the same rigorous standards as our full exhaust systems, utilizing TIG-welded 304 stainless steel for maximum durability against heat and corrosion. The adjustable nature of these tips ensures that regardless of your diffuser choice—be it OEM, M-Performance, or aftermarket carbon fiber—you can achieve a perfectly flush or staggered look. With a massive 100mm outlet and four distinct finish options, these tips provide a durable and aesthetically pleasing refresh to the most visible part of your BMW’s exhaust system. Key Features: Durable Double-Wall Design: Protects the outer finish from heat discoloration while providing a premium, thick-edge look. Secure Fitment: Includes all necessary hardware to ensure the tips remain locked in place even under high vibration. Easy Maintenance: Stainless and coated finishes are designed for simple cleaning and long-term resistance to road grime. Precision Engineering: Test-fitted on in-house G8X exhaust fixtures to ensure 100% accuracy in fitment. Aesthetic Versatility: Four distinct finishes allow you to match your car’s trim (Chrome, Shadowline, or Carbon). Specifications: Platform: BMW G87 M2 / G80 M3 / G82 M4 / G83 M4 Compatibility: Exclusively for Active Autowerke Valved Rear Exhausts Length (Overall): 133mm Opening (Internal/External): 70mm / 100mm Tip Finishes: Brushed Stainless Matte Black Carbon Fiber over Brushed Carbon over Black Chrome

Show More Show Less

Active Autowerke Rear Exhaust Tips For Active Exhausts (Carbon Over B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285664

Part#: 11-094CB

Ships in 3 Business Days

$ 1,044.00 USD

Add to Wish List

Qty

$ 1,044.00 USD

Add to Wish List

Refine the rear profile of your BMW with Active Autowerke’s G8X-specific 100mm exhaust tips. These tips are built to the same rigorous standards as our full exhaust systems, utilizing TIG-welded 304 stainless steel for maximum durability against heat and corrosion. The adjustable nature of these tips ensures that regardless of your diffuser choice—be it OEM, M-Performance, or aftermarket carbon fiber—you can achieve a perfectly flush or staggered look. With a massive 100mm outlet and four distinct finish options, these tips provide a durable and aesthetically pleasing refresh to the most visible part of your BMW’s exhaust system. Key Features: Durable Double-Wall Design: Protects the outer finish from heat discoloration while providing a premium, thick-edge look. Secure Fitment: Includes all necessary hardware to ensure the tips remain locked in place even under high vibration. Easy Maintenance: Stainless and coated finishes are designed for simple cleaning and long-term resistance to road grime. Precision Engineering: Test-fitted on in-house G8X exhaust fixtures to ensure 100% accuracy in fitment. Aesthetic Versatility: Four distinct finishes allow you to match your car’s trim (Chrome, Shadowline, or Carbon). Specifications: Platform: BMW G87 M2 / G80 M3 / G82 M4 / G83 M4 Compatibility: Exclusively for Active Autowerke Valved Rear Exhausts Length (Overall): 133mm Opening (Internal/External): 70mm / 100mm Tip Finishes: Brushed Stainless Matte Black Carbon Fiber over Brushed Carbon over Black Chrome

Show More Show Less

Active Autowerke Rear Exhaust Tips For Active Exhausts (Black) - G8x ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285662

Part#: 11-094B

Ships in 3 Business Days

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Refine the rear profile of your BMW with Active Autowerke’s G8X-specific 100mm exhaust tips. These tips are built to the same rigorous standards as our full exhaust systems, utilizing TIG-welded 304 stainless steel for maximum durability against heat and corrosion. The adjustable nature of these tips ensures that regardless of your diffuser choice—be it OEM, M-Performance, or aftermarket carbon fiber—you can achieve a perfectly flush or staggered look. With a massive 100mm outlet and four distinct finish options, these tips provide a durable and aesthetically pleasing refresh to the most visible part of your BMW’s exhaust system. Key Features: Durable Double-Wall Design: Protects the outer finish from heat discoloration while providing a premium, thick-edge look. Secure Fitment: Includes all necessary hardware to ensure the tips remain locked in place even under high vibration. Easy Maintenance: Stainless and coated finishes are designed for simple cleaning and long-term resistance to road grime. Precision Engineering: Test-fitted on in-house G8X exhaust fixtures to ensure 100% accuracy in fitment. Aesthetic Versatility: Four distinct finishes allow you to match your car’s trim (Chrome, Shadowline, or Carbon). Specifications: Platform: BMW G87 M2 / G80 M3 / G82 M4 / G83 M4 Compatibility: Exclusively for Active Autowerke Valved Rear Exhausts Length (Overall): 133mm Opening (Internal/External): 70mm / 100mm Tip Finishes: Brushed Stainless Matte Black Carbon Fiber over Brushed Carbon over Black Chrome

Show More Show Less

Rear Exhaust Tips For Active Exhausts (Carbon Over Brush) - G8x ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285663

Part#: 11-094C

Ships in 3 Business Days

$ 949.00 USD

Add to Wish List

Qty

$ 949.00 USD

Add to Wish List

Refine the rear profile of your BMW with Active Autowerke’s G8X-specific 100mm exhaust tips. These tips are built to the same rigorous standards as our full exhaust systems, utilizing TIG-welded 304 stainless steel for maximum durability against heat and corrosion. The adjustable nature of these tips ensures that regardless of your diffuser choice—be it OEM, M-Performance, or aftermarket carbon fiber—you can achieve a perfectly flush or staggered look. With a massive 100mm outlet and four distinct finish options, these tips provide a durable and aesthetically pleasing refresh to the most visible part of your BMW’s exhaust system. Key Features: Durable Double-Wall Design: Protects the outer finish from heat discoloration while providing a premium, thick-edge look. Secure Fitment: Includes all necessary hardware to ensure the tips remain locked in place even under high vibration. Easy Maintenance: Stainless and coated finishes are designed for simple cleaning and long-term resistance to road grime. Precision Engineering: Test-fitted on in-house G8X exhaust fixtures to ensure 100% accuracy in fitment. Aesthetic Versatility: Four distinct finishes allow you to match your car’s trim (Chrome, Shadowline, or Carbon). Specifications: Platform: BMW G87 M2 / G80 M3 / G82 M4 / G83 M4 Compatibility: Exclusively for Active Autowerke Valved Rear Exhausts Length (Overall): 133mm Opening (Internal/External): 70mm / 100mm Tip Finishes: Brushed Stainless Matte Black Carbon Fiber over Brushed Carbon over Black Chrome

Show More Show Less

Active Autowerke Exhaust Tips - 90mm - Matte Black Tip

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51075055

Part#: 11-044B

Ships in 3 Business Days

$ 351.00 USD

Add to Wish List

Qty

$ 351.00 USD

Add to Wish List

Fill Out Your Diffuser: Active Autowerke 90mm F87 M2 Exhaust Tips Let’s face it—the factory tips on the BMW F87 M2 are a bit of an afterthought. They’re small, they sit too far back, and they leave far too much of the ugly OEM piping exposed. If you’ve added an aggressive carbon fiber diffuser, those puny stock tips look even more out of place. Active Autowerke has the solution. These 90mm F87-specific tips are engineered specifically to fix the M2's rear-end aesthetics. By bumping the diameter up to 90mm, these tips provide the muscular, "filled-out" look the M2 should have had from the factory. Dial In Your Fitment One size does not fit all when it comes to style. These tips are fully adjustable, allowing you to choose exactly how much "poke" you want. Whether you prefer a flush, tucked look or an aggressive staggered setup that follows the curve of your bumper, these tips make it happen. To ensure they play nice with any aftermarket rear diffuser, Active Autowerke includes a 10mm exhaust mount bushing in every kit. This gives you the necessary clearance to prevent melting or vibrating against your expensive carbon fiber bodywork. Construction & Specs Available in a variety of finishes to match your build—from classic Brushed Stainless to stealthy Matte Black and sophisticated Carbon Fiber—each tip is built to withstand the heat and grime of daily driving while staying easy to clean. Tip Opening: 90mm (Massive upgrade over stock) Inlet Size: 70mm Overall Length: 119mm Engineering: Specifically designed to conceal internal OEM piping for a seamless look.

Show More Show Less

OEM Exhaust Tips(carbon Over Black Chrome) - G8x

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51285670

Part#: 11-098CB

Ships in 3 Business Days

$ 1,044.00 USD

Add to Wish List

Qty

$ 1,044.00 USD

Add to Wish List

Refined styling meets industrial durability with the Active Autowerke G8X 100mm Exhaust Tips. Constructed from TIG-welded 304 stainless steel, these tips are built to survive the extreme thermal cycles associated with the high-output S58 twin-turbo platform. Designed specifically for the Active Autowerke valved rear exhaust, these tips provide a direct-fit solution that enhances the rear stance of the G87 M2, G80 M3, and G82 M4. With a focus on long-term maintenance and ease of cleaning, each finish is treated to withstand road grime and exhaust soot while maintaining its premium luster. Key Features: Precision Engineering: Specifically developed for the latest generation of Active Autowerke G8X valved rear exhausts. Genuine Carbon Fiber: Carbon variants utilize a real plain-weave carbon sleeve riveted to a double-walled stainless base. Corrosion Resistance: 304 Stainless Steel construction ensures the tips will not rust or degrade over time. Shadowline Compatibility: Multiple finish options allow for a perfect match with BMW’s various exterior trim packages. USA Fabricated: Designed and test-fitted in Miami, FL, to ensure 100% fitment accuracy. Specifications & Tip Options: Inlet/Outlet: 70mm Inlet / 100mm Outlet Construction: TIG-welded 304 Stainless Steel Hardware: Includes all necessary set-screws or clamps for installation Available Finishes: Brushed Stainless Steel Matte Black Coated Carbon Fiber over Brushed Stainless Carbon Fiber over Black Chrome Vehicle Fitment: * 2021+ BMW M3 (G80) / M3 Competition / xDrive 2021+ BMW M4 (G82) / M4 Competition / xDrive 2021+ BMW M4 Convertible (G83) 2023+ BMW M2 (G87)

Show More Show Less

Project Cars

SELECT YOUR BMW

Active Autowerke BMW Exhaust Parts, Mufflers & Catalytic Converters

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results