BMW Exhaust Parts, Mufflers & Catalytic Converters

If you're seeking enhanced performance for your B46/B48 equipped F Chassis, explore our expertly crafted straight-pipe exhaust kit. By integrating our Turner Mid-Pipe Upgrade with the ECS Muffler Delete, you'll unlock the true potential and exhilarating, race-inspired sound of your exceptional 4-cylinder turbo engine!

Shedding an average of 27 lbs, this kit replaces your cumbersome and restrictive factory exhaust with lightweight, high-flow T304 stainless steel 3.0" exhaust piping. It's a seamless, direct bolt-on replacement for your entire factory exhaust, allowing you to swiftly elevate the performance of your daily driver or weekend warrior!

The B46/B48 engines represent a formidable new generation of 4 cylinders, boasting enhanced capabilities and a significantly improved exhaust note compared to their predecessors. Unlock the full driving potential of your underappreciated 330 or 430 with this brilliant curated kit designed specifically for you.

Features and benefits:

Complete sound and performance transformation
Simple, direct bolt-on installation (with instructions!)
27lb weight savings! (Muffler delete - 21 lbs, midpipe upgrade - 6 lbs!)
Tip adjustment capability ​
Slide farther on for left and right adjustment
Rotate for verticle adjustment
Good looking and durable 304 stainless steel construction
Heavy-duty fabricated sheet metal exhaust hangers
Dual staggered tip exhaust tips (integrated)
Installation and Support:

Installation is as easy as unbolting your factory exhaust and installing your full lightweight replacement
Tools you might want for the job:
Exhaust hanger removal pliers - T379176

Looking to elevate the acoustics of your X3 M40i / X4 M40i with an exhaust system that not only offers a much-improved sound while retaining the flexibility associated with valves, but also raises the eye appeal beyond the mundane? Look no further than the Dinan valved cat-back to meet all your needs… and then some! 

The full cat-back requires no cutting and utilizes factory mounting locations that allow the Dinan exhaust system to be a straightforward and painless install. Fabricated from brushed 100% T304 stainless steel, TIG welded, and free of hydroformed pipe, the upgraded system is also a marked improvement from its predecessor - both in terms of material/construction as well as in overall looks. The most glaring change being the replacement of the OEM dual slip tips in favor of an M-inspired quad tip configuration. Despite the limited room, Dinan was determined to offer four individually functioning pathways/tips and not lessen the representation with Y-tips or other gimmickry.  The result is a proper quad setup furnished with cavity covering 3.75-inch (95mm) tips in either black ceramic or polished stainless ensuring the system can be appreciated even before it is heard.

While looks are important, the auditory advantages are what any enthusiast is truly after with an exhaust system, and the Dinan offering for the G01/G02 M40i platform delivers in spades. For not only aural enhancement via the elimination of the central collector/resonator, but also weight savings and simplicity. The stock single-to-dual pipe setup has been abandoned in favor of an enlarged, straight, unrestricted, and freer-flowing single pipe system. This pathway feeds into a Helmholtz-equipped muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows versatility in volume levels with the retained factory valve functionality. Go from refined when cruising (low RPM’s) to rowdy when in it (high RPM’s), with ease. Or better yet, pair the system with an exhaust valve remote and have full control of elevating or reducing the sound! When open, the system behaves as a straight pipe solution that promotes maximum flow and volume for an exhilarating and forceful chorus. When the valve is closed, however, exhaust gases are wholly redirected through the muffler and emit more tempered vocals acceptable for even the most sensitive ears. It is the perfect blend of civility when cruising or the full spectrum of auditory delight when in the throttle. No matter the situation, the Dinan valved cat-back exhaust system is the answer for the discerning enthusiast looking for sound without sacrifice.

Features:

Maximum gains of +6 HP and +5 lb-ft of torque

Enjoyably louder, sportier sound w/ a delightful octave drop

Drone abatement technologies used to reduce cabin resonance

Quad 3.75-inch (95mm) double-walled, polished (or black ceramic coated) clamp-on tips with laser engraved Dinan logo

Larger diameter piping for increased flow (83mm vs. 80mm) 

Factory resonator/collector removed for increased volume

7-pounds lighter than the stock system (60-pounds vs. Dinan: 53-pounds)

100% 304 Stainless Steel construction

Factory valve functionality retained; refined or rowdy from the same exhaust

Direct bolt-on w/ no cutting or welding required

Factory-like fitment with included mounting hardware and valve componentry for both pre-LCI and LCI compatibility

Dinan sport mufflers are designed to compliment the M3 and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Four 3.5" black ceramic tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

Features of the F9X M3 Dinan Exhaust -

• Single channel design
• Sportier Sound
• 10 lbs lighter than stock part + 100% 304 stainless steel construction
• Simple installation using high quality BMW OEM clamps and hangers
• Quad 3" laser engraved black ceramic coated exhaust tips with Dinan logo
• 6 HP & 5 lb-ft of torque
• "Straight Through" canister design
• Helmholtz chamber to remove drone

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2008-2013 E92/3 BMW M3