The BMW Shifter Carrier Arm Bushings - Oval are essential components designed to support and stabilize the shifter assembly in various BMW models. These bushings ensure a firm and accurate connection between the shifter carrier arm and the vehicle chassis, resulting in smoother, more precise gear shifts.

Key Features:

1. Oval Design for Stability:

   • The oval shape of these bushings provides a secure fit, ensuring that the shifter carrier arm stays properly aligned. This helps reduce excess play and maintains the integrity of the shifter assembly over time.

2. Enhanced Shifting Accuracy:

   • By minimizing unwanted movement and flex in the shifter mechanism, these bushings provide a more direct and controlled shifting experience, improving the feel of each gear change.

3. Durable and Long-Lasting:

   • Constructed from high-quality, durable materials, these bushings are built to withstand the stresses of everyday driving and high-performance use. They offer long-lasting reliability, even under demanding conditions.

4. Improved Driving Experience:

   • Replacing worn-out or degraded bushings can significantly enhance the overall driving experience. With new oval bushings installed, drivers will enjoy tighter, more responsive gear shifts, leading to a more engaging and enjoyable driving dynamic.

5. Easy Installation:

   • These bushings are designed to fit seamlessly into the shifter assembly of various BMW models. While installation can be handled by DIY enthusiasts, professional installation is recommended for optimal alignment and performance.

6. Wide Compatibility:

   • Suitable for a range of BMW models, these bushings are a versatile and valuable upgrade or replacement for drivers looking to restore or improve their vehicle’s shifter performance.

Benefits of Upgrading or Replacing:

• Tighter Shifting Feel: New oval bushings restore precision to the shifter assembly, eliminating the slack that develops over time in worn bushings, providing a more connected driving experience.
• Reduced Vibrations and Noise: Fresh bushings help dampen vibrations and reduce noise from the shifter assembly, contributing to a smoother, quieter ride.
• Extended Shifter Life: By maintaining proper alignment and reducing stress on other components, replacing old bushings can help extend the life of the entire shifter assembly.

In summary, the BMW Shifter Carrier Arm Bushings - Oval are a crucial upgrade for drivers looking to improve the performance and feel of their shifter. With enhanced durability, improved shifting precision, and a better driving experience, these bushings are a valuable investment for any BMW enthusiast.

Upgrade Your BMW Shifter with the BMW Teflon Shifter Bushing Kit

• Enhanced shifting precision for a smoother driving experience
• Durable Teflon construction for long-lasting performance
• Reduces play and slop in the shifter mechanism
• Easy installation with included hardware and instructions

Enhance the performance of your BMW's shifter with the BMW Teflon Shifter Bushing Kit. This kit is designed to provide enhanced shifting precision, resulting in a smoother and more responsive driving experience. Crafted from durable Teflon material, these bushings offer long-lasting performance and reliability. By reducing play and slop in the shifter mechanism, this kit ensures precise gear changes every time you shift. Installation is quick and easy with the included hardware and detailed instructions, allowing you to enjoy the benefits of improved shifter performance in no time. Access Secret Premium Dashboard

Turner Motorsport Dual Shear Selector Rod (DSSR)

Enhance your N54-equipped 135i or 335i’s driving feel with the Turner Motorsport DSSR. Designed to give your shifter a much more precise and solid connection, this DSSR replaces the OEM selector rod, eliminating the play and deflection that come from single-shear designs. Pair it with a Turner short-shift kit for the ultimate shifting upgrade.

Think of the DSSR as a major upgrade from the single-contact OEM rod, much like riding a bike with two hands instead of one: you have stronger, more precise control over each gear change. With its dual-contact setup, the DSSR “sandwiches” both sides of the shifter and transmission, creating a direct link that feels solid, eliminating the vague and sloppy feel of the factory setup.

Key Benefits:

Enhanced Precision: Significantly reduces deflection and play, giving you a more connected feel while shifting Compatible with Factory & Aftermarket Shifters: Perfect for custom setups as well as stock configurations Durable Build: Fabricated from high-quality 303 stainless steel, offering rust resistance and longevity Complete Hardware Included: Comes with zinc-plated hardware for a secure installation Specifications:

Material: 303 stainless steel construction Compatibility: Replacement for part #25117524722 (E8X/E9X N54 models) Installation Design: Two-piece assembly with captive pins, designed for simple alignment and adjustability Fitment: Specially engineered to fit the tight N54 carrier without interference Installation Tips:

Remove your factory selector rod and take note of its orientation. Attach the DSSR to both the transmission selector joint and lower shift lever. Shift to 3rd or 5th gear for maximum access to the supplied hardware, then secure tightly.

Turner Motorsport Polyurethane Shifter Arm Bushing

Want more responsive and accurate shifts without sacrificing comfort? The Turner Motorsport Polyurethane Shifter Arm Bushing is the perfect enhancement to reduce unwanted movement and play in the shift arm assembly. Factory rubber bushings absorb vibrations for smoothness but compromise direct feedback and often wear out, leading to sloppy, imprecise shifting.

Crafted from high-performance polyurethane with a corrosion-resistant 304 stainless steel sleeve, this bushing maintains stability without stretching or wearing out like rubber. Experience the tactile feel of more precise shifts, with minimal NVH (Noise, Vibration, and Harshness) added to your drive. A must-have for any driver looking to take control of their BMW's performance.

Key Features:

Precision Control: Firmer than factory rubber for a crisp, responsive shifter feel Long-Lasting Materials: Made with durable 70a polyurethane and a 304 stainless steel mounting sleeve Easy Installation: Direct replacement—no modifications needed OEM Compatibility: Replaces BMW part numbers 25111222015 and 25111222652 Specifications:

Material: High-quality 70a polyurethane and 304 stainless steel Made in the USA: Proudly manufactured with quality materials Durability: Improved lifespan over factory rubber bushings, reducing slop and enhancing gear engagement

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Delrin bushings have almost no deflection and will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

New carrier bushing pins are included.

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Teflon bushings are not as stiff as Delrin so they won't transmit as much vibration and buzz in the shifter. Yet Teflon will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

We advise getting a replacement bushing carrier pin as well. If the original rubber bushings are worn the pin will have wear too and you will still have slop in the shifter, even with the new bushings.

These are the ROUND shifter carrier bushings (some BMW models have oval bushings).

This item fits the following BMWs:
6/1986-1992 E30 BMW 318i 318is 325e 325es 325i 325is 325ic M3
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic
1999-2006 E46 BMW 323i 323ci 325i 325ci
1982-1988 E28 BMW 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 535i M5

Shifter slop is a common complaint among all BMW models. Some of that play comes from the bushings where the shifter carrier mounts to the transmission. The original rubber carrier bushings don't last very long and when they get too soft the shifter flops around. These Teflon bushings are not as stiff as Delrin so they won't transmit as much vibration and buzz in the shifter. Yet Teflon will last much longer than the factory rubber, giving you precise shifting for many years.

Note: this is only one part of the shift linkage and there may be other components that need replacing to improve shifting feel.

We advise getting a replacement bushing carrier pin as well. If the original rubber bushings are worn the pin will have wear too and you will still have slop in the shifter, even with the new bushings.

These are the OVAL shifter carrier bushings (some BMW models have round bushings).

This item fits the following BMWs:
1992-1998 E36 BMW 328i 328is 328ic M3
1999-2002 E46 BMW 328i 328ci 330i 330ci
2001-2006 E46 BMW M3
1997-2003 E39 BMW 540i M5
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Roadster
1999-2003 E52 BMW Z8

The Powerflex BMW Shifter Carrier Arm Bushings - Oval (Pack of 2) are a premium upgrade for BMW enthusiasts seeking enhanced precision and reliability in their gear shifts. These bushings replace the OEM rubber bushings, which can degrade over time, leading to loose or vague shifting.

Product Highlights:

• Shape: Oval design, tailored for specific BMW models.
• Material: Crafted from durable polyurethane, offering superior performance over standard rubber bushings.
• Enhanced Shift Feel: Significantly reduces flex and movement in the shifter carrier arm, providing tighter and more responsive gear shifts.
• Longevity: Resistant to wear, oil, and extreme temperatures, ensuring long-lasting performance under all driving conditions.
• Direct Replacement: Simple installation as a direct fit for the factory bushings.
• Performance Benefits: Ideal for daily driving or track use, offering improved shift accuracy and reduced sloppiness.

This set of two bushings is a perfect upgrade for drivers looking for crisper, more controlled shifting in their BMW, making it an essential component for both performance and c

Revitalize your BMW driving experience with the Turner Motorsport Double Adjustable Short Shift Kit. BMWs have suffered from long throw shifters, but Turner Motorsport has the perfect remedy. This kit offers double adjustability, allowing users to fine-tune height and throw, rediscovering the joy of driving.

Worried about the long shifter? Turner's rally lever extension, available separately, provides a Quick Change option, allowing easy switching between long and short levers. Whether your car is built for the track, weekend adventures, or daily commuting, Turner's short shifter kit is the ideal solution.

Installation is a breeze compared to competitors, thanks to the custom bearing cup, enabling easy inside-car installation (for applications using the stock shifter arm).

Key Benefits:

• Adjustable throw from conservative to ultra-short
• Ultra-crisp shifter feel for quicker, more precise shifts
• Enhanced driving experience

Installation Features:

• Bearing cup assembly for easy inside-vehicle installation
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability Features:

• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• Independently adjustable shifter throw

Design Features:

• CNC machined lower shifter assembly from 4140 chromoly steel
• Melonite coated with 304 stainless steel shifter ball and Nylatron® NSM bushings
• 10mm adjustment range in the lower shift arm
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for exceptional durability and corrosion resistance
• Rally Upper Shift Lever machine grooved for OEM boot compatibility
• Black delrin knob with standard ⅜-16 thread
• Compatible with OE BMW shift knobs or aftermarket shift knobs

Turner Motorsport's commitment to perfection is evident in the development of the short shifter, in association with Rennline. The result is a robust, durable, and aesthetically pleasing Dual Shear Selector Rod (DSSR), ensuring a more precise shift by reducing flexibility in the selector rod.

Turner Weighted Shift Knob - 6 Speed:

Prepare for an elevated driving experience with the Turner Weighted Shift Knob. This 6-speed coin-designed knob not only feels fantastic but also enhances shifting with added weight, resulting in faster engagement. Crafted from billet 6061-T6 aluminum, CNC machined for precision, and anodized for durability, it's the perfect complement to Turner's short shift kits.

Enhance the shifting experience of your BMW E46 M3 with the BMW E46 M3 Teflon Shifter Bushing Kit. This high-quality bushing kit is designed to reduce play and improve precision in the shifter mechanism, resulting in smoother and more accurate shifts. Engineered specifically for BMW E46 M3 models, this kit offers easy installation and durable performance. Upgrade your BMW's shifting performance with this premium Teflon shifter bushing kit.

• Reduces play in the shifter mechanism
• Improves shifting precision for smoother and more accurate shifts
• Engineered specifically for BMW E46 M3 models
• Easy installation for convenient upgrade

One of the most satisfying upgrades you can make to your BMW is to its factory shifter mechanism. By reducing the shifter's throw, you can give your manual transmission BMW a sportier, more precise feel. However, with so many different "short shift kits" out there, how can you be sure you're making the right decision? With the introduction of the Rogue Engineering OCTANE short shift kit, the choice is now crystal clear!

Rogue Engineering refuses to compromise with "lever substitution" as a method of short shift kit development. Rather than using actual test vehicles for their products, some companies actually dig through OEM factory parts diagrams to determine which factory levers can be substituted with others. This "lever substitution" method of introducing product is unacceptable. These shift kits have been developed and perfected through years of experience in proven short shifter technology, by Co-Founder, Ben Liaw. As longtime BMW enthusiasts know, Ben was single-handedly responsible for introducing and developing the idea of affordable, BMW factory-like, short shift kits for late model BMWs (BL/SS for those young enough to remember!). 

Rogue Engineering idea of a short shift kit is not substituting levers in place of factory ones just because "they fit". Throughout the 80s until recently, BMW was notorious for using only a few specific shifter levers for their manual transmission vehicles. For other companies, making just a few "replacement levers" and offering them in place of those factory part numbers was an easy way of calling it a short shift kit. Unfortunately, for those companies, BMW started using many different part numbers making it more difficult to just "swap in a lever".

Rogue Engineering only develops it's short shift kit with test vehicles in their facility, testing numerous prototypes, offering others to test it before settling on its final design. They feel that this old school, real world testing is the best way when modifying OEM ergonomic, sensory-based controls.

Turner Motorsport presents the Double Adjustable Short Shift Kit, providing a solution to the historically long throw shifters in BMWs. Turner's short shifters, with height and throw adjustability, offer a double-adjustable feature, allowing users to find their preferred driving sweet spot.

For those curious about the long shifter, Turner's rally lever extension (available separately) provides a Quick Change option, making switching between long and short levers effortless. Whether your vehicle is for track use, weekend adventures, or daily commuting, Turner's short shifter kit caters to diverse needs.

Key Benefits:

• Adjustable from a conservative short throw to an ultra-short throw
• Ultra-crisp shifter feel for quicker, more precise shifts
• Enhanced driving experience

Installation:

• Bearing cup assembly for easy in-car installation
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability:

• Independently adjustable knob height
• 22mm adjustment range to fine-tune shifter throw and feel

Design Features:

• Lower Shifter Assembly CNC machined from 4140 chromoly steel
• Melonite coated, 304 stainless steel shifter ball, and Nylatron® NSM bushings
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for exceptional durability
• 22mm independent height adjustability for shift levers
• Rally Upper Shift Lever machine grooved for OEM boot compatibility

When Turner developed their short shifter, the goal was to enhance the BMW shifter assembly's precision and smoothness. Developed with Rennline, the Dual Shear Selector Rod minimizes flexibility for a more precise shift.

Turner Weighted Shift Knob - 6 Speed:

The Turner Weighted Shift Knob promises a fantastic driving experience. The added weight ensures faster engagement and an overall improved shifting experience.

Features:

• Anodized billet aluminum core
• Extremely durable Delrin outer construction
• Weight: 340g (11.99oz)
• 6 Speed Coin design
• Anodized billet shift boot collar with Turner logo

Turner Polyurethane Shifter Arm Bushing:

Enhance your shifting experience with Turner Motorsport's Polyurethane Shifter Arm Bushing. Designed for crisper shifting with reduced NVH.

Features:

• Corrosion-resistant 304 stainless steel mounting sleeve
• Stiffer bushing for a crisper shifter feel
• Ready to install, no modifications required
• Replaces Genuine BMW part numbers 25111222015 and 25111222652
• Improved durability over OEM rubber
• Made in America

Upgrade your BMW driving experience with Turner Motorsport's precision-engineered performance products.

Upgrade the shifting experience of your BMW with the BMW M62 S62 Teflon Shifter Bushing Kit. This high-quality bushing kit is designed to improve shift accuracy and reduce play in the shifter mechanism, resulting in a crisper and more precise shifting feel. Engineered specifically for BMW M62 and S62 engines, this kit offers easy installation and long-lasting durability. Enhance your BMW's performance and driving experience with this premium shifter bushing kit.

• Improves shift accuracy for precise gear changes
• Reduces play in the shifter mechanism for a crisper feel
• Engineered specifically for BMW M62 and S62 engines
• Easy installation with long-lasting durability

Enhance the driving experience of your MINI F Chassis with the Quickshifter Short Shifter Kit. This kit is designed to improve gear shifts, providing a more precise and responsive feel. Crafted with high-quality materials, it offers durability and reliability, ensuring long-lasting performance. Whether you're on the street or the track, the Quickshifter Short Shifter Kit delivers smoother shifts and reduces shift throw distance for quicker gear changes.

• Enhances gear shift precision and responsiveness
• Reduces shift throw distance for quicker gear changes
• Durable construction ensures long-lasting performance
• Improves overall driving dynamics and control

Upgrade your MINI F Chassis with the Quickshifter Short Shifter Kit to enjoy improved gear shifting performance and a more engaging driving experience.

Enhance the shifting experience of your Mini Cooper S Gen 3 with this quick shift kit. Crafted with precision CNC machining from billet aluminum, this kit reduces shift travel by approximately 40%, providing smoother and quicker gear changes. With its large adjustment range, drivers can customize the shift lever travel to suit their driving preferences. Adjustment can be easily done from inside the car using a 16 mm wrench. The kit includes a convenient removal tool to assist in removing the OEM shifter.

• Precision CNC machined from billet aluminum
• Reduces shift travel by approximately 40%
• Large adjustment range for personalized shift lever travel
• Easy adjustment from inside the car
• Includes removal tool for OEM shifter

Turner Z3M Performance Axle-Back Exhaust

Unleash your Z3M’s full potential with the Turner Performance Axle-Back Exhaust. Forget the heavy, restrictive factory exhaust — this system not only drops a significant 42 pounds but also provides a clean, aggressive tone that announces your arrival on the road or track.

Why Choose the Turner Z3M Exhaust?

While the E36 and E46 M3 models often steal the spotlight in the BMW performance scene, the Z3M, with its coveted S52 or S54 engine, offers an exceptional blend of power and handling. The Turner Axle-Back Exhaust embraces and enhances the Z3M’s capabilities, refining its sound, power, and aesthetic appeal for true enthusiasts.

With a straight-through muffler design, this exhaust optimizes exhaust flow, boosting throttle response, torque, and horsepower. Lightweight and meticulously engineered, it’s crafted to bolt right onto the factory mid-pipes for easy installation. Precision-designed for flawless fitment, it retains the OEM exhaust angle for a clean, OEM+ look.

Pro Tip: When swapping out your exhaust, check if your gaskets and mounts need refreshing for a completely seamless install.

Replacement Part Recommendations:

Gaskets – P# 18111723379 Round Hangers – P# 18211105635 Square Hangers – P# 18211704198 Exhaust Features and Benefits:

Weight Reduction: 60% lighter than stock — a whopping 42-pound weight loss. Enhanced Sound: Free-flowing design minimizes rasp for a refined, powerful tone. Precision Fit: Designed using FARO ARM laser scanning and CAD technology. Durable Build: Made from T304 stainless steel with a natural finish, 1.25mm wall thickness, and TIG-welded for durability. Increased Power: Mandrel-bent dual 2.5" stainless steel tubing reduces back pressure, enhancing performance. Aesthetic Upgrade: Quad-tip design for an eye-catching rear view. Kit Includes: Clamps, hardware, optional Turner exhaust tips, and a full rear exhaust section. Turner Motorsport DSSR (389mm) for Z3M

Upgrade your Z3M’s shifting with Turner’s Dual Shear Selector Rod (DSSR). The DSSR provides a more solid connection, minimizing deflection and delivering a direct, precise shift feel. This meticulously crafted rod uses dual shear points to secure both ends of the shifter, translating every gear change into a crisp, controlled action — especially effective when paired with Turner’s poly rear shifter bushings.

Why Upgrade to the DSSR?

Imagine shifting with a single arm; you have control, but it’s limited. The DSSR uses both contact points, like gripping handlebars with both hands, offering a balanced and powerful connection. With its solid construction and minimized play, this DSSR keeps you firmly connected to your transmission for a completely immersive shifting experience.

DSSR Key Benefits:

Enhanced Shift Feel: Dual shear design for stability, minimizing unwanted movement. Perfect Fit: Precision-machined pins ensure seamless installation. High-Quality Materials: Constructed from 303 stainless steel for durability and corrosion resistance. Consistent Alignment: Maintains factory shifter length and angle for optimal ergonomics.

Revolutionize your BMW's shifting experience with the Turner Motorsport Double Adjustable Short Shift Kit. Tired of the factory's long throw shifters? Turner's solution offers height and throw adjustability, allowing drivers to rediscover the joy of driving their cars.

Ever wondered about the long shifter? Turner's rally lever extension, available separately, provides a Quick Change option. The lower part of the short shifter is keyed, facilitating seamless transitions between long and short levers. Whether you're a track enthusiast, weekend warrior, or daily driver, Turner's short shifter kit caters to your needs.

Key Benefits:

• Adjustable between conservative short throw to ultra-short throw
• Ultra-crisp shifter feel for quicker, more precise shifts
• Enhanced driving experience

Installation:

• Bearing cup assembly for easy installation inside the vehicle
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability:

• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw and feel

Design Features:

• Lower Shifter Assembly CNC machined from 4140 chromoly steel
• Melonite coated with 304 stainless steel shifter ball and Nylatron® NSM bushings
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for durability and corrosion resistance
• Rally Upper Shift Lever machine grooved for OEM boot compatibility
• Both shift levers offer 22mm of independent height adjustability

Turner Weighted Shift Knob - 6 Speed:

Get ready for an improved shifting experience with the Turner Weighted Shift Knob. Crafted from billet 6061-T6 aluminum and featuring Delrin outer construction, this knob adds weight for faster engagement and an overall enhanced driving feel.

Features:

• Anodized billet aluminum core
• Extremely durable Delrin outer construction
• Weight: 340g (11.99oz)
• 5 Speed Coin design
• Anodized billet shift boot collar with Turner logo engraved

Upgrade your BMW's shifting experience with Turner's precision-engineered short shift kit and weighted shift knob for a complete shifter transformation.

Enhance your BMW's driving experience with the Turner Motorsport Double Adjustable Short Shift Kit, designed to tackle the historically long throw shifters. Turner's innovative short shifters, offering both height and throw adjustability, bring double adjustability to the table, ensuring you rediscover the joy of driving.

Wondering about the long shifter? Turner has you covered with the Quick Change option provided by the separately sold rally lever extension. The lower portion of the short shifter is keyed, simplifying the switch between long and short levers effortlessly. Whether you're hitting the track, enjoying weekend drives, or tackling daily commutes, Turner's short shifter kit caters to your diverse driving needs.

Experience easy installation compared to competitors, thanks to the custom bearing cup allowing inside-car installation (for applications using the stock shifter arm).

Key Features:

• Adjustable throw from conservative to ultra-short
• Ultra-crisp shifter feel for quicker, precise shifts
• Easy installation with custom bearing cup
• Quick Change option for rally lever extension
• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• CNC machined for durability and corrosion resistance

Upgrade your driving pleasure further with the Turner Weighted Shift Knob - a 6-speed coin-designed knob that promises a captivating driving experience with added weight, resulting in faster engagement and improved shifting.

Turner Weighted Shift Knob Features:

• Anodized billet aluminum core
• Durable Delrin outer construction
• Weighs 340g (11.99oz) for enhanced shift feel
• Anodized billet shift boot collar with Turner logo

Pair the knob with Turner's short shift kits for a complete shifter makeover. Crafted from billet 6061-T6 aluminum, CNC machined for precision, and anodized for durability, this knob is designed for seamless compatibility with OE BMW shift knobs.