Shifter Upgrades and Components

One of the most satisfying upgrades you can make to your BMW is to its factory shifter mechanism. By reducing the shifter's throw, you can give your manual transmission BMW a sportier, more precise feel. However, with so many different "short shift kits" out there, how can you be sure you're making the right decision? With the introduction of the Rogue Engineering OCTANE short shift kit, the choice is now crystal clear!

Rogue Engineering refuses to compromise with "lever substitution" as a method of short shift kit development. Rather than using actual test vehicles for their products, some companies actually dig through OEM factory parts diagrams to determine which factory levers can be substituted with others. This "lever substitution" method of introducing product is unacceptable. These shift kits have been developed and perfected through years of experience in proven short shifter technology, by Co-Founder, Ben Liaw. As longtime BMW enthusiasts know, Ben was single-handedly responsible for introducing and developing the idea of affordable, BMW factory-like, short shift kits for late model BMWs (BL/SS for those young enough to remember!). 

Rogue Engineering idea of a short shift kit is not substituting levers in place of factory ones just because "they fit". Throughout the 80s until recently, BMW was notorious for using only a few specific shifter levers for their manual transmission vehicles. For other companies, making just a few "replacement levers" and offering them in place of those factory part numbers was an easy way of calling it a short shift kit. Unfortunately, for those companies, BMW started using many different part numbers making it more difficult to just "swap in a lever".

Rogue Engineering only develops it's short shift kit with test vehicles in their facility, testing numerous prototypes, offering others to test it before settling on its final design. They feel that this old school, real world testing is the best way when modifying OEM ergonomic, sensory-based controls.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Over time, factory rubber bushings and plastic components break down, leaving your shifter feeling loose, vague, and disconnected. That lack of precision doesn’t just dull the driving experience—it takes away from the performance BMWs are known for. If your G8X shifter isn’t delivering the crisp engagement you expect, we've developed an all-inclusive fix.

The Ultimate G8X Shifter Rebuild & Upgrade Kit has been expertly crafted by our team of BMW enthusiasts to bring back the sharp, direct shifting feel your BMW deserves. This all-in-one kit combines high-performance upgrades with refreshed OEM hardware, offering a complete overhaul for your shifting system:

Turner Motorsport G8X Dual-Shear Selector Rod (DSSR)

Dual-contact design delivers smoother, more accurate gear changes compared to the OEM single-sided rod

Precision-machined from 6061-T6 billet aluminum for strength and durability

Includes custom-fit shims and connecting pins for easy installation

Maintains factory 232mm length, ensuring there is no change to the factory shift knob position

Replaces OEM Part #: 25118097173

Turner Motorsport G8X Polyurethane Rear Shifter Bushing

Ditch the soft factory rubber! This polyurethane upgrade reduces play and sharpens feedback

CNC-machined aluminum housing with 70A high-durometer polyurethane insert

Corrosion-resistant Type II anodized finish

Replaces OEM Part #: 25118623459

ECS Teflon Shifter Bushing Kit

Replaces the front rubber bushing with low-friction, long-lasting Teflon

Reduces side-to-side play in the shifter carrier

Includes new carrier pins for a complete install

Replaces OEM Part #: 25117507695

Also included are essential Genuine and OE components to ensure a full-service refresh:

BMW Shifter Rod Joint – 25117580281

Vaico Circlips (Qty 2) – 25117571899

Bremmen Shifter Ball Bushing – 25111220600

Experience precision like never before—upgrade your shifting experience today with the Ultimate Shifter Rebuild & Upgrade Kit.

This kit will allow you to experience a more engaging and precise shift while reducing the throw dramatically. On some E46 models, you will experience a dramatic 25% decrease in shift throw, leading to quicker acceleration times.

Our kit includes the following:

BMW Performance Shift Lever
BMW Performance ZHP Weighted Shift Knob w/ 6 Speed Insert
Shifter Lever Bearing
Shift Shaft Circlip
With everything you need to easily and quickly change the quality of your shifts, you will be enjoying your driving experience even more. Alcantara boot offers that added class and new knob rejuvenates your tired console.

Revitalize your BMW driving experience with the Turner Motorsport Double Adjustable Short Shift Kit. BMWs have suffered from long throw shifters, but Turner Motorsport has the perfect remedy. This kit offers double adjustability, allowing users to fine-tune height and throw, rediscovering the joy of driving.

Worried about the long shifter? Turner's rally lever extension, available separately, provides a Quick Change option, allowing easy switching between long and short levers. Whether your car is built for the track, weekend adventures, or daily commuting, Turner's short shifter kit is the ideal solution.

Installation is a breeze compared to competitors, thanks to the custom bearing cup, enabling easy inside-car installation (for applications using the stock shifter arm).

Key Benefits:

• Adjustable throw from conservative to ultra-short
• Ultra-crisp shifter feel for quicker, more precise shifts
• Enhanced driving experience

Installation Features:

• Bearing cup assembly for easy inside-vehicle installation
• "Quick Change" between standard and "Rally Style" upper shift levers

Adjustability Features:

• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• Independently adjustable shifter throw

Design Features:

• CNC machined lower shifter assembly from 4140 chromoly steel
• Melonite coated with 304 stainless steel shifter ball and Nylatron® NSM bushings
• 10mm adjustment range in the lower shift arm
• Shift levers and shifter bearing cup assembly machined from 6061-T6 aluminum
• Type II anodized for exceptional durability and corrosion resistance
• Rally Upper Shift Lever machine grooved for OEM boot compatibility
• Black delrin knob with standard ⅜-16 thread
• Compatible with OE BMW shift knobs or aftermarket shift knobs

Turner Motorsport's commitment to perfection is evident in the development of the short shifter, in association with Rennline. The result is a robust, durable, and aesthetically pleasing Dual Shear Selector Rod (DSSR), ensuring a more precise shift by reducing flexibility in the selector rod.

Turner Weighted Shift Knob - 6 Speed:

Prepare for an elevated driving experience with the Turner Weighted Shift Knob. This 6-speed coin-designed knob not only feels fantastic but also enhances shifting with added weight, resulting in faster engagement. Crafted from billet 6061-T6 aluminum, CNC machined for precision, and anodized for durability, it's the perfect complement to Turner's short shift kits.

A sloppy shifter detracts from your driving pleasure. If you want to bring back that factory crisp shifter, this kit will do that for you. Not only will it totally overhaul your shifter, but also make it perform better than stock thanks to the ECS Tuning teflon shifter bushings included in the kit. They will eliminate all side to side slop and give you more engaging shifts.

This item fits the following BMWs: 
1999-2005 E46 BMW 328i 328ci, 330i 330ci 5 Speed Transmission 

The Powerflex BMW Shifter Carrier Arm Bushings - Oval (Pack of 2) are a premium upgrade for BMW enthusiasts seeking enhanced precision and reliability in their gear shifts. These bushings replace the OEM rubber bushings, which can degrade over time, leading to loose or vague shifting.

Product Highlights:

• Shape: Oval design, tailored for specific BMW models.
• Material: Crafted from durable polyurethane, offering superior performance over standard rubber bushings.
• Enhanced Shift Feel: Significantly reduces flex and movement in the shifter carrier arm, providing tighter and more responsive gear shifts.
• Longevity: Resistant to wear, oil, and extreme temperatures, ensuring long-lasting performance under all driving conditions.
• Direct Replacement: Simple installation as a direct fit for the factory bushings.
• Performance Benefits: Ideal for daily driving or track use, offering improved shift accuracy and reduced sloppiness.

This set of two bushings is a perfect upgrade for drivers looking for crisper, more controlled shifting in their BMW, making it an essential component for both performance and c

One of the most satisfying upgrades you can make to your BMW is to its factory shifter mechanism. By reducing the shifter's throw, you can give your manual transmission BMW a sportier, more precise feel. However, with so many different "short shift kits" out there, how can you be sure you're making the right decision? With the introduction of the Rogue Engineering OCTANE short shift kit, the choice is now crystal clear!

Rogue Engineering refuses to compromise with "lever substitution" as a method of short shift kit development. Rather than using actual test vehicles for their products, some companies actually dig through OEM factory parts diagrams to determine which factory levers can be substituted with others. This "lever substitution" method of introducing product is unacceptable. These shift kits have been developed and perfected through years of experience in proven short shifter technology, by Co-Founder, Ben Liaw. As longtime BMW enthusiasts know, Ben was single-handedly responsible for introducing and developing the idea of affordable, BMW factory-like, short shift kits for late model BMWs (BL/SS for those young enough to remember!). 

Rogue Engineering idea of a short shift kit is not substituting levers in place of factory ones just because "they fit". Throughout the 80s until recently, BMW was notorious for using only a few specific shifter levers for their manual transmission vehicles. For other companies, making just a few "replacement levers" and offering them in place of those factory part numbers was an easy way of calling it a short shift kit. Unfortunately, for those companies, BMW started using many different part numbers making it more difficult to just "swap in a lever".

Rogue Engineering only develops it's short shift kit with test vehicles in their facility, testing numerous prototypes, offering others to test it before settling on its final design. They feel that this old school, real world testing is the best way when modifying OEM ergonomic, sensory-based controls.