Find Parts That Fit Your Vehicle

BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

This category contains parts that fit the following chassis:

Sub-Categories

Sort By:

BC Racing RM Series Coilover Suspension Kit - BMW E93 M3 (with EDC) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47576358

Part#: I-153-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47439437

Part#: I-49-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - U11 X1 FWD

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51356033

Part#: I-119-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

For the serious enthusiast, the BC Racing DS Series for the U11 BMW X1 FWD offers a "no-compromise" approach to suspension geometry and thermal stability. By utilizing high-strength SAE9254 cold-wound steel springs, this system provides a highly consistent spring rate that resists deformation even under heavy, long-term use. The digressive damping architecture is specifically tuned to stabilize the X1's high center of gravity, providing a "planted" car-like feel that inspires confidence on technical roads. Every DS Series kit is hand-assembled and fully rebuildable, featuring bearing-mounted spring platforms to eliminate "spring binding" or popping noises during low-speed steering maneuvers. Key Features: Enhanced Body Control: Targeted damping profile specifically reduces the "wallow" associated with factory SUV suspension. Camber Adjustable Top Mounts: Precision-engineered aluminum alloy plates provide unmediated feedback and allow for aggressive alignment specs. Patented Locking Ring: Features a concave lower locking ring that prevents the system from vibrating loose under intense conditions. Thermal Management: Mono-tube architecture and high-quality fluid ensure the valving remains consistent during aggressive driving sessions. Serviceable Construction: All components are individual and replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2022+ BMW X1 (U11) Front-Wheel Drive (FWD). Spring Rates (Default): Front: 5.5 kg/mm | Rear: 6.5 kg/mm. Damping Architecture: 1-Way Adjustable (30 Clicks). Build Material: TIG-welded heavy-gauge steel and CNC-machined aluminum. Warranty: 1-Year limited manufacturer's warranty.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - E46 M3 Convertible ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51355994

Part#: I-121-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

For the E46 M3 Convertible owner who demands uncompromised geometry control, the BC Racing HM Series offers a motorsport-first engineering solution. By utilizing an inverted strut layout with a much larger internal piston shaft, the HM Series excels in maintaining wheel alignment during extreme lateral cornering—a critical factor for the MacPherson strut-equipped M3. The addition of external reservoirs ensures the damping fluid remains cool, preserving valving accuracy lap after lap. Standard front pillowball camber plates eliminate factory rubber "mush," providing direct and unmediated steering feedback. Because convertibles often require higher roll stiffness to compensate for chassis flex, the HM Series’ 12kg rear spring rate provides the stability needed to keep the car planted and responsive. Key Features: Enhanced Side-Load Resistance: The inverted design handles high lateral loads longer than traditional upright dampers without fatigue. Reduced Damper Fade: External canisters move fluid away from brake heat to maintain consistent lap times. Camber Adjustable Top Mounts: Precision-engineered aluminum plates allow for surgical alignment and increased turn-in bite. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked even under track conditions. Fully Rebuildable: All components are individual and replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2000–2006 BMW M3 Convertible (E46 Chassis). Spring Rates (Standard): Front: 8 kg/mm | Rear: 12 kg/mm (Swift Springs). Hardware: Black chrome-plated steel shock bodies and 6061-T6 aluminum components. Adjustment Type: Independent ride height, spring preload, and 2-way damping. Warranty: 1-Year limited manufacturer's warranty.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - BMW F34 328i RWD ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:47576366

Part#: I-95-ER

Back Ordered

$ 1,955.00 USD

Add to Wish List

Qty

$ 1,955.00 USD

Add to Wish List

The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - MK5 A90/91 (19-24) Toyo...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:49023077

Part#: C-165-ER

Back Ordered

$ 1,955.00 USD

Add to Wish List

Qty

$ 1,955.00 USD

Add to Wish List

The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precedes it, with the addition of more extensive real-world track testing. For racers and enthusiasts who are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - E84 X1 sDrive28i ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555836

Part#: I-40-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

7k Front & 11k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Aluminum and Rubber Rear Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

BC Racing ER-Series 12-19 BMW 3 Series Touring (5-Bolt Top Mounts) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25009236

Part#: I-115-ER

Back Ordered

$ 1,985.00 USD

Add to Wish List

Qty

$ 1,985.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - E46 M3 Convertible ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:51356002

Part#: I-121-ZR

Back Ordered

$ 2,865.00 USD

Add to Wish List

Qty

$ 2,865.00 USD

Add to Wish List

For the professional-level racer or the extreme enthusiast, the BC Racing ZR Series addresses the unique geometric and thermal requirements of the E46 M3 platform. By utilizing inverted front struts with a massive 42mm piston shaft, the ZR Series provides extreme structural rigidity, preventing geometry deflection under heavy braking and cornering loads. The 3-way adjustment allows the driver to "dial in" the car for specific obstacles; for instance, softening high-speed compression to soak up aggressive curbing while keeping low-speed compression firm for immediate turn-in response. Combined with standard pillowball top mounts, this system eliminates the "mushy" feel of factory rubber, providing direct, unmediated feedback to the driver. Key Features: Reduced Damper Fade: Remote external canisters move fluid away from hot brake components to ensure consistent lap times. Camber Adjustable Top Mounts: High-quality aluminum plates allow for aggressive track alignments to maximize the tire contact patch. Pillowball Rear Mounts: Replaces rubber bushings with solid spherical bearings for increased response and precision. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked, even under extreme track vibration. Fully Rebuildable: Every component is individual and replaceable, making this a long-term investment in the car's competitive potential Specifications: Vehicle Fitment: 2000–2006 BMW M3 (E46) Convertible / Coupe. Spring Rates (Default): Front: 8 kg/mm | Rear: 12 kg/mm. Construction: TIG-welded steel and CNC-machined aluminum. Adjustment Range: 3-Way Independent (Rebound / Low-Speed Compression / High-Speed Compression). Warranty: 1-Year manufacturer’s warranty against defects.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - BMW G60 540i xDrive ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46719197

Part#: I-141-DS

Back Ordered

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - BMW E93 M3 without EDC ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46409681

Part#: I-154-BR

Back Ordered

$ 1,215.00 USD

Add to Wish List

Qty

$ 1,215.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - BMW G16 840i RWD ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:13266389

Part#: I-104-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only highly effective but also don't break the bank! The BR Series coilover suspension kit features mounting points and brackets that are compatible with all stock mounting locations and components. It is their most popular and versatile suspension setup, offering linear springs (where possible), 30 levels of dampening adjustment including simultaneous compression and rebound control, and a 2-inch minimum ride height drop. All BR Series kits are Dyno tested to determine the best valving and spring rates for each chassis and are tested for a minimum of 6 months before being released to the public to ensure ride quality and reliability. All upper shock and strut mounts are constructed of 6061-T6 Aluminum to ensure a lightweight and incredibly strong design. Front design options include Caster/Camber Plates, Camber plates, and Rubber Mount Plates. See below for the option fitted to your chassis's BR Series Kit. The adjustable plate designs allow for up to 3 degrees of camber adjustment. The Rubber Mount Plates are better for preventing unwanted NVH. Lower shock mounts are either made of 6061-T6 Aluminum just like the top mounts (Fork or Bolt Eye Style Mount) that have been milled from a single piece of material, or high-quality STKM13C steel with all brackets welded robotically. Both styles are then powder coated for corrosion protection and styling. All springs used, linear, S-barrel, and v-barrel, are made of SAE9254 steel and utilize a Zinc coating under a powder coating finish to ensure rust cannot penetrate the metal of the spring and compromise performance or reliability. Liner springs are used in places possible unless otherwise limited by the OE design of the vehicle that does not allow it. In that case, S-Barrel or V-Barrel springs are used to match OE shape/style specifications and the spring's rate is then matched to the linear rate. BC Racing creates their kits utilizing a wide variety of shock types, lengths, and diameters. Each vehicle depending on their data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in their factory and dyno tested before use in their kits. Shocks are paired together by their compression and rebound numbers after dyno testing for even and precise quality and performance. Each shock body used in their system is 53mm for added strength, performance, and increased fluid capacity (unless limited spacing will not allow it). The shocks are then coated in black chrome for a clean, cohesive appearance and corrosion resistance. Specs and Features: 8k Front & 5k Rear Spring Rate S-Barrel front & Linear rear springs Valved specifically to spring style and rate Aluminum and Rubber Front Mounts Rear Rubber Mounts Black Powder Coated Components All OE style brackets and mounting for a perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening 2-inch minimum and 3+ Inches of total potential drop Great for Track, Street, and any other conditions

Project Cars

SELECT YOUR BMW

BMW Coilovers

Sub-Categories

BC Racing RM Series Coilover Suspension Kit - BMW E93 M3 (with EDC) ...

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

BC Racing BR Series Coilover Suspension Kit - U11 X1 FWD

BC Racing HM Series Coilover Suspension Kit - E46 M3 Convertible ...

BC Racing ER Series Coilover Suspension Kit - BMW F34 328i RWD ...

BC Racing ER Series Coilover Suspension Kit - MK5 A90/91 (19-24) Toyo...

BC Racing BR Series Coilover Suspension Kit - E84 X1 sDrive28i ...

BC Racing ER-Series 12-19 BMW 3 Series Touring (5-Bolt Top Mounts) ...

BC Racing ZR Series Coilover Suspension Kit - E46 M3 Convertible ...

BC Racing DS Series Coilover Suspension Kit - BMW G60 540i xDrive ...

BC Racing BR Series Coilover Suspension Kit - BMW E93 M3 without EDC ...

BC Racing BR Series Coilover Suspension Kit - BMW G16 840i RWD ...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results