Find Parts That Fit Your Vehicle

BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

BC Racing - Corporate Logo
T#:51355994
Part#: I-121-HM
Back Ordered
$ 2,565.00 USD
Free Shipping
$ 2,565.00 USD
Free Shipping
For the E46 M3 Convertible owner who demands uncompromised geometry control, the BC Racing HM Series offers a motorsport-first engineering solution. By utilizing an inverted strut layout with a much larger internal piston shaft, the HM Series excels in maintaining wheel alignment during extreme lateral cornering—a critical factor for the MacPherson strut-equipped M3. The addition of external reservoirs ensures the damping fluid remains cool, preserving valving accuracy lap after lap. Standard front pillowball camber plates eliminate factory rubber "mush," providing direct and unmediated steering feedback. Because convertibles often require higher roll stiffness to compensate for chassis flex, the HM Series’ 12kg rear spring rate provides the stability needed to keep the car planted and responsive. Key Features: Enhanced Side-Load Resistance: The inverted design handles high lateral loads longer than traditional upright dampers without fatigue. Reduced Damper Fade: External canisters move fluid away from brake heat to maintain consistent lap times. Camber Adjustable Top Mounts: Precision-engineered aluminum plates allow for surgical alignment and increased turn-in bite. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked even under track conditions. Fully Rebuildable: All components are individual and replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2000–2006 BMW M3 Convertible (E46 Chassis). Spring Rates (Standard): Front: 8 kg/mm | Rear: 12 kg/mm (Swift Springs). Hardware: Black chrome-plated steel shock bodies and 6061-T6 aluminum components. Adjustment Type: Independent ride height, spring preload, and 2-way damping. Warranty: 1-Year limited manufacturer's warranty.
Show More Show Less
BC Racing - Corporate Logo
T#:46409681
Part#: I-154-BR
Back Ordered
$ 1,215.00 USD
Free Shipping
$ 1,215.00 USD
Free Shipping
Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
Show More Show Less
BC Racing - Corporate Logo
T#:47576367
Part#: I-97-DS
Back Ordered
$ 1,415.00 USD
Free Shipping
$ 1,415.00 USD
Free Shipping
BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.
Show More Show Less

H&R Street Performance SS Coilover Kit - E36 318ic 325ic 328ic ...
5X Entries For Our Spin To Win Sweepstakes!
We Price Match - Give Us A Call or Chat!
H&R - Corporate Logo
T#:374091
Part#: 36925-2
Back Ordered
$ 1,690.00 USD
Free Shipping
$ 1,690.00 USD
Free Shipping
H&R Street Performance SS Coil Overs are now available with polished stainless steel shock tubes. These new Coil Overs are shock damping adjustable—allowing personalized tuning of the shock setting to suit driving needs for high performance or comfort. Height adjustability is made possible by fully threaded shock bodies and easy to adjust spring seats / locking rings. H&R ride development engineers have precisely plotted the perfect shock damping curves of each application for optimized handling and superb ride comfort. To ensure the best quality available H&R has partnered with world-renowned shock absorber specialist KONI to manufacture the shocks.
Show More Show Less

BC Racing - Corporate Logo
T#:51356002
Part#: I-121-ZR
Back Ordered
$ 2,865.00 USD
Free Shipping
$ 2,865.00 USD
Free Shipping
For the professional-level racer or the extreme enthusiast, the BC Racing ZR Series addresses the unique geometric and thermal requirements of the E46 M3 platform. By utilizing inverted front struts with a massive 42mm piston shaft, the ZR Series provides extreme structural rigidity, preventing geometry deflection under heavy braking and cornering loads. The 3-way adjustment allows the driver to "dial in" the car for specific obstacles; for instance, softening high-speed compression to soak up aggressive curbing while keeping low-speed compression firm for immediate turn-in response. Combined with standard pillowball top mounts, this system eliminates the "mushy" feel of factory rubber, providing direct, unmediated feedback to the driver. Key Features: Reduced Damper Fade: Remote external canisters move fluid away from hot brake components to ensure consistent lap times. Camber Adjustable Top Mounts: High-quality aluminum plates allow for aggressive track alignments to maximize the tire contact patch. Pillowball Rear Mounts: Replaces rubber bushings with solid spherical bearings for increased response and precision. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked, even under extreme track vibration. Fully Rebuildable: Every component is individual and replaceable, making this a long-term investment in the car's competitive potential Specifications: Vehicle Fitment: 2000–2006 BMW M3 (E46) Convertible / Coupe. Spring Rates (Default): Front: 8 kg/mm | Rear: 12 kg/mm. Construction: TIG-welded steel and CNC-machined aluminum. Adjustment Range: 3-Way Independent (Rebound / Low-Speed Compression / High-Speed Compression). Warranty: 1-Year manufacturer’s warranty against defects.
Show More Show Less
KW Suspension - Corporate Logo
T#:338280
Part#: TMS338280
Ships in 4 Business Days
Starting at $ 2,454.00 USD
Starting at $ 2,454.00 USD
Adjustable Rebound Damping, Sport Comfort Springs

Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads.

KW street comfort � The most individual sport suspension with maximum comfort

With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.

  • Maximum driving comfort for a perfect performance and more driving pleasure
  • Guarantees more comfort, flexibility and sportive as regular OE sport suspensions
  • Comfortable adjustment
  • Better handling due to less body roll
  • TUV approved lowering range
  • Individually height-adjustable - Front - 10-40mm, Rear - 20-40mm
  • Trapezoid thread for a easy height adjustability
  • High quality damper components for a long durability
  • Adjustable rebound damping
  • Complete detailed documentation for easy use.
    When using original tires, wheel spacers may be required.



    This item fits the following BMWs:
    2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
    2014+ F34 BMW 328i xDrive GT - Gran Tourismo
  • Show More Show Less

    BC Racing - Corporate Logo
    T#:46753512
    Part#: I-153-DS
    Back Ordered
    $ 1,415.00 USD
    Free Shipping
    $ 1,415.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:47576359
    Part#: I-154-RM
    Back Ordered
    $ 1,515.00 USD
    Free Shipping
    $ 1,515.00 USD
    Free Shipping
    The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.
    Show More Show Less

    Bilstein - Corporate Logo
    T#:56977996
    Part#: 22-317407
    Back Ordered
    New Item
    $ 133.00 USD
    Free Shipping
    $ 133.00 USD
    Free Shipping
    Eliminate sluggish suspension response and sharpen front-end control with Bilstein suspension engineering.

    BC Racing BR Series Coilover Suspension Kit - 2014-2022 BMW i3 ...
    Custom built to order - 3-4 week estimated lead time
    BC Racing - Corporate Logo
    T#:4042154
    Part#: I-91-BR
    Back Ordered
    $ 1,195.00 USD
    Free Shipping
    $ 1,195.00 USD
    Free Shipping
    The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. This is done by extensively testing each vehicle then refining the coilover characteristics as many times as needed to ensure the most well-balanced and affordable aftermarket suspension conceivable. BC Racing takes great pride in choosing spring rates for our off-the-shelf kits that strike the perfect balance between comfort and performance so you're never stuck with an oversprung suspension like many other brands sell. BC Racing offers one of the widest ranges of damping adjustment with 30-clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can't go wrong with the BC Racing BR Series Coilover System.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:46409676
    Part#: I-155-BR
    Back Ordered
    $ 1,215.00 USD
    Free Shipping
    $ 1,215.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:555816
    Part#: I-73-BR
    Back Ordered
    $ 1,195.00 USD
    Free Shipping
    $ 1,195.00 USD
    Free Shipping

    Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

    BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

    The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

    Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

    The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

    All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

    Specs and Features:

    • 12k Front & 4.5k Rear Spring Rate
    • Linear front & V-Barrel rear springs
    • Valved specifically to spring style and rate
    • Aluminum and Rubber Front Mounts
    • Aluminum and Rubber Rear Mounts
    • Black Powder Coated Components
    • All OE style brackets and mounting for perfect fit
    • 30 Levels of Simultaneous Compression and Rebound Dampening
    • 2 inch minimum and 3+ Inches of total potential drop
    • Great for Track, Street, and any other conditions
    Show More Show Less


    BC Racing - Corporate Logo
    T#:51355987
    Part#: I-121-DS
    Back Ordered
    $ 1,415.00 USD
    Free Shipping
    $ 1,415.00 USD
    Free Shipping
    The BC Racing DS Series for the E46 M3 Convertible is built using motorsport-grade materials designed to withstand the rigors of spirited driving and technical road courses. Because the E46 M3 platform benefits greatly from increased front camber, this kit comes standard with front pillowball camber plates. These plates replace the compliant factory rubber mounts, providing unmediated feedback to the driver and allowing for aggressive alignment settings to maximize tire contact patches. Every DS Series kit is hand-assembled and fully rebuildable, with the option to upgrade to Swift Springs for even more consistent spring rates and reduced weight. Whether you're carving canyons or attending a weekend track day, the DS Series provides the stability and feedback needed to push the E46 M3 chassis to its limits. Key Features: Front Camber Plates: Precision-engineered aluminum alloy plates for surgical alignment and increased turn-in bite. Patented Locking Ring: Features a concave lower locking ring that prevents the system from vibrating loose even under track conditions. Bearing-Mounted Spring Platforms: Minimizes "spring binding" or popping during low-speed steering maneuvers. Fully Rebuildable: Every component, from the seals to the valving, is individual and replaceable for long-term serviceability. Customization Ready: Fully compatible with custom spring rates and Swift Spring upgrades for tailored track setups. Specifications: Vehicle Fitment: 2000–2006 BMW M3 Convertible (E46 Chassis). Spring Rates (Default): Front: 7 kg/mm | Rear: 12 kg/mm. Spring Type: High-strength SAE9254 cold-wound steel. Adjustability: Independent ride height, independent spring preload, and 30-way damping. Warranty: 2-Year limited manufacturer's warranty.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:46753504
    Part#: I-149-DS
    Back Ordered
    $ 1,415.00 USD
    Free Shipping
    $ 1,415.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:46409680
    Part#: I-153-BR
    Back Ordered
    $ 1,215.00 USD
    Free Shipping
    $ 1,215.00 USD
    Free Shipping
    Looking for coilovers that will provide reliability on street-driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:47576358
    Part#: I-153-RM
    Back Ordered
    $ 1,515.00 USD
    Free Shipping
    $ 1,515.00 USD
    Free Shipping
    The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:47439437
    Part#: I-49-HM
    Back Ordered
    $ 2,565.00 USD
    Free Shipping
    $ 2,565.00 USD
    Free Shipping
    The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!
    Show More Show Less
    BC Racing - Corporate Logo
    T#:47439395
    Part#: I-68-RM
    Back Ordered
    $ 1,515.00 USD
    Free Shipping
    $ 1,515.00 USD
    Free Shipping
    The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:47576366
    Part#: I-95-ER
    Back Ordered
    $ 1,955.00 USD
    Free Shipping
    $ 1,955.00 USD
    Free Shipping
    The BC Racing ER Series Coilover System is the next evolution in your suspension tuning and vehicle setup needs. The ER Series offers 30-clicks of independently adjustable compression and rebound with remote reservoirs to increase oil capacity and help with faster heat dissipation. Each ER Series Coilover System undergoes the same rigorous testing and development as the coilover series that precede it, with the addition of more extensive real-world track testing. For racers and enthusiasts that are looking for more adjustability in terms of varying compression and rebound settings, look no further than the BC Racing ER Series Coilover System.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:47439427
    Part#: I-86-RM
    Back Ordered
    $ 1,515.00 USD
    Free Shipping
    $ 1,515.00 USD
    Free Shipping
    The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:51355992
    Part#: I-121-ER
    Back Ordered
    $ 1,955.00 USD
    Free Shipping
    $ 1,955.00 USD
    Free Shipping
    For the E46 M3 enthusiast looking to bridge the gap between a high-end street car and a dedicated race machine, the BC Racing ER Series offers a "motorsport-first" engineering approach. By moving the secondary damping piston to the external canister, the system maintains its integrity under high-stress conditions. This is especially beneficial for the M3 Convertible, where the high 12kg rear spring rate helps counteract the platform's inherent weight and chassis flex, providing a flat and predictable cornering attitude. The system includes front pillowball camber plates as standard, eliminating the compliant factory rubber bushings to provide direct, unmediated steering feedback and allowing for aggressive track-ready alignment settings. Key Features: Reduced Damping Fade: External canisters keep fluid cooler by increasing the distance from hot brake components. Camber Adjustable Top Mounts: Precision-engineered aluminum plates allow for surgical alignment and increased turn-in bite. Patented Concave Locking Ring: BC Racing’s unique design ensures lower mounts remain securely locked, even under extreme vibration. Linear Piston Architecture: Provides a predictable and consistent damping feel for better driver confidence at the limit. Serviceable Construction: All components are individual and fully replaceable, ensuring the long-term serviceability of the system. Specifications: Vehicle Fitment: 2000–2006 BMW M3 (E46) Convertible / Coupe. Spring Rates (Default): Front: 8 kg/mm | Rear: 12 kg/mm. Spring Type: High-strength SAE9254 cold-wound steel. Construction: Black chrome-plated steel bodies for maximum corrosion resistance and anodized 6061-T6 aluminum. Warranty: 1-Year limited manufacturer's warranty.
    Show More Show Less

    AST Suspension  - Corporate Logo
    T#:24643800
    Part#: RAC-B1603SD
    Back Ordered
    Sale - Save 10% $ 7,569.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 6,780.15 USD
    Sale - Save 10%
    $ 7,569.00

    This product was last offered at the strikethrough price on
    11-04-2026

    $ 6,780.15 USD
    BC Racing - Corporate Logo
    T#:47439436
    Part#: I-49-RM
    Back Ordered
    $ 1,515.00 USD
    Free Shipping
    $ 1,515.00 USD
    Free Shipping
    The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.
    Show More Show Less
    AST Suspension  - Corporate Logo
    T#:24643799
    Part#: RIV-B1603SD
    Back Ordered
    Sale - Save 5% $ 6,010.00

    This product was last offered at the strikethrough price on
    11-08-2026

    $ 5,709.50 USD
    Sale - Save 5%
    $ 6,010.00

    This product was last offered at the strikethrough price on
    11-08-2026

    $ 5,709.50 USD


    Bilstein Coil Over Spanner Wrench Set (Notch Style)
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:1702
    Part#: 19101X
    In Stock
    $ 22.03 USD
    Free Shipping on orders $49 and up
    Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:341685
    Part#: 68510301
    In Stock
    $ 503.99 USD
    Free Shipping
    $ 503.99 USD
    Free Shipping

    The KW EDC Delete Unit, tailored for BMW vehicles, is a high-performance solution designed to elevate your driving experience. This electronic damping control delete unit empowers you with complete control over your BMW's suspension system. By incorporating this unit, you can eliminate the factory electronic damping control, resulting in a more predictable and smoother ride.

    The KW EDC Delete Unit offers unparalleled flexibility, enabling you to finely adjust your suspension settings to match your specific preferences and driving conditions. Whether you crave a firmer, sporty ride or a more comfortable cruising experience, this unit provides the versatility to tailor your suspension settings accordingly.

    Precision-crafted and engineered for optimum performance, the KW EDC Delete Unit is a valuable enhancement for BMW enthusiasts looking to enhance their driving dynamics. Unleash improved handling and customization possibilities like never before with this exceptional upgrade.

    Show More Show Less
    BC Racing - Corporate Logo
    T#:555864
    Part#: DMP-EXT
    Back Ordered
    $ 39.99 USD
    Free Shipping on orders $49 and up
    The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.
    Show More Show Less

    Macht Schnell - Corporate Logo
    T#:5351
    Part#: TMS5351
    Ships on Dec 8, 2026
    $ 249.99

    This product was last offered at the strikethrough price on
    05-29-2026

    $ 249.00 USD
    Free Shipping
    $ 249.00 USD
    Free Shipping
    For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

    The Macht Schnell EDC Emulation Module is possible of the following features:
  • The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required
  • Compatible with iDrive and non-iDrive systems
  • Easy 15-minute installation process with no wire cutting
  • Proper emulation of the EDC monitoring system
  • No dealer visits or coding required after installation
  • Completely removable at any time

    Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
    Will not work on vehicles equiped with BMW's Dynamic Drive system.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less

    ECS Coilover Damping Extensions - 220MM
    10X Entries Into Our F80 M3 Sweepstakes 10X Entries For Our Spin To Win Sweepstakes!
    ECS - Corporate Logo
    T#:42369339
    Part#: 004673LA01
    In Stock
    Sale - Save 20% $ 37.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 30.39 USD
    Free Shipping on orders $49 and up
    Sale - Save 20%
    $ 37.99

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 30.39 USD
    Free Shipping on orders $49 and up

    Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

    The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

    Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

    Kit Includes:

    (2) Rear damping adjuster extension cables

    Installation hardware and Allen key

    A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

    Show More Show Less
    Suspension Techniques - Corporate Logo
    T#:379570
    Part#: 18220812KT
    In Stock at Vendor
    $ 1,669.00 USD
    Free Shipping
    $ 1,669.00 USD
    Free Shipping

    KW Suspension - Corporate Logo
    T#:11697
    Part#: 68510145
    In Stock at Vendor
    $ 503.99 USD
    Free Shipping
    $ 503.99 USD
    Free Shipping
    The installation of aftermarket suspension, whether it be shocks and springs, coilovers, or even air ride, can lead to error codes and lights from the electronic dampening control system. In order to prevent any issues, installing a cancellation kit will fool the stock system into seeing a functional stock suspension system. This will get rid of any annoying lights without needing to reprogram the vehicle or any modules.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:12970849
    Part#: 68511187
    In Stock
    $ 583.99 USD
    Free Shipping
    $ 583.99 USD
    Free Shipping
    This KW edc cancellation kit will eliminate any problematic codes that may appear when swapping in aftermarket coilovers.

    KW Suspension - Corporate Logo
    T#:31390573
    Part#: 65030047
    Back Ordered
    $ 49.00 USD
    Free Shipping
    $ 49.00 USD
    Free Shipping

    BMW E36 E46 E9X Coil Spring Spacer - 50mm - Priced Each

    The BMW E36 E46 E9X Coil Spring Spacer - 50mm - Priced Each is designed to be used with KW/ST coilover systems, providing additional lift to your vehicle beyond the standard coilover adjustments. Each spacer is 50mm thick and is sold individually, with one required per coil.

    • Adds 50mm of additional height to your vehicle’s suspension.
    • Ideal for use with KW/ST coilover systems.
    • Helps achieve desired ride height when coilovers alone are insufficient.
    • Sold individually for custom fitment.
    Show More Show Less

    Bilstein B16 PSS9 Coil Over Suspension - E36 M3
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:344018
    Part#: 48-115674
    In Stock
    $ 2,199.00 USD
    Free Shipping
    $ 2,199.00 USD
    Free Shipping

    The B16 PSS9 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

    Bilstein's monotube shock dampers in the PSS9 offer 9 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P9) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

    Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

    The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

    If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS9. It combines all of the best German engineering with real-world development, and a lifetime warranty.

    Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

    Featuring:

    • Largest available piston diameter for greater sensitivity and precise control.
    • Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
    • 9-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
    • Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
    • Weather resistant coating to resist oxidization, and ensure long life.
    • Lighter weight reduces wear and tear on suspension components.
    • Wrenches to adjust front and rear ride height included!

    Fits the Following Vehicles:
    1996-1999 BMW E36 M3

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:2602201
    Part#: 68510389
    In Stock
    $ 503.99 USD
    Free Shipping
    $ 503.99 USD
    Free Shipping
    Recently upgrade your suspension and get stuck with a suspension fault code? This kit from KW allows you to change out your suspension without worry, as it cancels the factory damper signal to stop the fault code from appearing.
    Show More Show Less
    H&R Street Performance Coilover System - F10 528i 535i 535d 550i ...
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:578099
    Part#: 28894-1
    In Stock
    10% off MSRP $ 1,980.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,782.00 USD
    Free Shipping
    10% off MSRP
    $ 1,980.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,782.00 USD
    Free Shipping
    The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance. H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:12970850
    Part#: 68511041
    In Stock
    $ 583.99 USD
    Free Shipping
    $ 583.99 USD
    Free Shipping
    Recently upgrade your suspension and get stuck with a suspension fault code? This kit from KW allows you to change out your suspension without worry, as it cancels the factory damper signal to stop the fault code from appearing. Usable with non-KW aftermarket suspensions also.
    Show More Show Less
    H&R Street Performance Coilover System - F33/36 428ix 430ix 435ix 440...
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:578098
    Part#: 28895-8
    Ships in 4 Business Days
    10% off MSRP $ 1,980.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,782.00 USD
    Free Shipping
    10% off MSRP
    $ 1,980.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,782.00 USD
    Free Shipping
    The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance. H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are Height adjustment range: F: -.6-1.6" R: -.1-2.2"
    Show More Show Less
    TC Kline Racing - Corporate Logo
    T#:16175686
    Part#: TCKE9XDBL400700
    Ships in 3 Business Days
    $ 3,448.99 USD
    $ 3,448.99 USD
    Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/700#R springs .
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11701
    Part#: 68510213
    Ships in 2 Business Days
    $ 663.99 USD
    Free Shipping
    $ 663.99 USD
    Free Shipping
    F01 Type 7L KW Electronic Damping Cancellation Kit

    H&R Street Performance Coilovers - G20 330/M340i xDrive, G22 430/M440...
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat! For vehicles with Standard & Sport Suspension, not compatible with Adaptive Suspension
    H&R - Corporate Logo
    T#:3586295
    Part#: 28658-5
    Ships in 4 Business Days
    10% off MSRP $ 2,480.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,232.00 USD
    Free Shipping
    10% off MSRP
    $ 2,480.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,232.00 USD
    Free Shipping
    G20/G22 AWD - Street perfomance Coilovers - 1.2" - 2.1" F Lowering - 1.0" - 2.1" R Lowering H&R has dedicated almost four decades to the suspension industry and it definitely shines through in the end product. Their teams of engineers and designers have consistently produced products obtaining the coveted TUV & ISO certification for safety and quality. 100% German made, the line of H&R coilovers is the original aftermarket suspension, but still one of the best. H&R suspension components are synonymous with quality. Since the inception of H&R in the late 1970s, they have been making some of the highest quality suspension components available. With a need for an improved suspension in the automotive aftermarket, H&R essentially created the modern-day coilover that we are all used to. Not only concentrated on “stance,” H&R considered high quality materials and ride comfort extremely important. Bring some of that German engineering to your vehicle with a set of H&R street performance coilovers. With the adjustability of ride height, the fully threaded, custom valved suspension system will offer high performance with superb ride comfort and handling. Progressive rate springs both front and rear assure that no matter what height you have your vehicle set at, your ride will be great. By lowering the vehicle's center of gravity, less body roll will be experienced during hard cornering with a more balanced vehicle weight.
    Show More Show Less
    G20/G22 H&R Street Performance Coilovers
    5X Entries For Our Spin To Win Sweepstakes!
    We Price Match - Give Us A Call or Chat!
    H&R - Corporate Logo
    T#:3586291
    Part#: 28658-1
    Ships in 4 Business Days
    10% off MSRP $ 1,880.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,692.00 USD
    Free Shipping
    10% off MSRP
    $ 1,880.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 1,692.00 USD
    Free Shipping
    G20/G22 2WD - Street perfomance Coilovers - 1.2" - 2.1" F Lowering - 1.0" - 2.1" R Lowering H&R suspension components are synonymous with quality. Since the inception of H&R in the late 1970s, they have been making some of the highest quality suspension components available. With a need for an improved suspension in the automotive aftermarket, H&R essentially created the modern-day coilover that we are all used to. Not only concentrated on “stance,” H&R considered high quality materials and ride comfort extremely important. Bring some of that German engineering to your vehicle with a set of H&R street performance coilovers. With the adjustability of ride height, the fully threaded, custom valved suspension system will offer high performance with superb ride comfort and handling. Progressive rate springs both front and rear assure that no matter what height you have your vehicle set at, your ride will be great. By lowering the vehicle's center of gravity, less body roll will be experienced during hard cornering with a more balanced vehicle weight. H&R has dedicated almost four decades to the suspension industry and it definitely shines through in the end product. Their teams of engineers and designers have consistently produced products obtaining the coveted TUV & ISO certification for safety and quality. 100% German made, the line of H&R coilovers is the original aftermarket suspension, but still one of the best.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:5457386
    Part#: 68511086
    In Stock at Vendor
    $ 503.99 USD
    Free Shipping on orders $49 and up
    Prevents dashboard lights when installing coilovers on a vehicle with EDC
    BC Racing - Corporate Logo
    T#:598257
    Part#: I-03-DS
    Ships in 6 Business Days
    $ 1,445.00 USD
    Free Shipping
    $ 1,445.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:598264
    Part#: I-10-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less

    BC Racing - Corporate Logo
    T#:598262
    Part#: I-07-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:598281
    Part#: I-23-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less


    BC Racing - Corporate Logo
    T#:598280
    Part#: I-19-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less
    Performance Coilover Suspension System With Aluminum Skid Plate - E9X...
    Our Doorbuster deals are in limited supply at these prices. Get yours while they're in stock! Can't find the perfect bundle? Call or chat with us to build a custom one. 10X Entries For Our Spin To Win Sweepstakes!
    Doorbusters - Corporate Logo
    T#:47473706
    Part#: 028534TMSDBKT
    In Stock
    Sale - Save 19% $ 1,731.98

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 1,399.00 USD
    Free Shipping
    Sale - Save 19%
    $ 1,731.98

    This product was last offered at the strikethrough price on
    11-07-2026

    $ 1,399.00 USD
    Free Shipping

    Take your E9X to the next level with this limited-time bundle, combining Turner Motorsport Adjustable Coilovers with a Heavy-Duty Aluminum Skid Plate. Lower your ride with precision, improve handling, and protect your undercarriage—all in one package.

    ECS Performance Adjustable Coilover System

    Designed for drivers who demand both performance and comfort, the ECS Performance Coilovers elevate your BMW’s handling without compromising daily drivability. These coilovers provide a smooth, stock-like ride while giving your car an aggressive stance and dramatically improved cornering confidence—all at a fraction of the cost of top-tier alternatives.

    Key Specs & Features:

    Spring Rates: Front 8kg/mm, Rear 12kg/mm

    32 levels of rebound damping adjustment for tailored ride quality

    Adjustable monotube shocks/struts with progressive-rate coil springs reduce body roll and enhance road-hugging grip

    Adjustable front bodies allow precise ride height setup while maintaining proper spring preload

    Front and rear adjustable bodies ensure shocks operate in the correct valving range at any ride height

    Durable, High-Quality Construction:

    Gloss black powder-coated strut and shock bodies for longevity and aesthetics

    Clear zinc-coated threaded sections for corrosion resistance

    Powder-coated Reflex Silver Metallic springs

    Red anodized billet aluminum lower spring seats with locking collars for easy, on-car adjustment

    Integrated bump stops for improved suspension performance

    Turner Aluminum Skid Plate Kit – Wrinkle Black

    Protect your E9X undercarriage from potholes, speed bumps, road debris, and inclines with Turner Motorsport’s heavy-duty aluminum skid plate. This direct OE replacement provides far superior durability than the factory plastic belly pan, offering peace of mind for daily driving or aggressive lowering.

    Features & Benefits:

    Constructed from robust 5052 aluminum for lasting protection

    Massively improved durability over the OE plastic belly pan

    Access door allows easy oil drain plug access

    Choice of Wrinkle Black powder coat or Milled Finish

    Includes heavy-duty mounting bracket and stainless steel hardware

    Designed to fit OE side skid plates while offering superior strength

    In-house engineered by Turner Motorsport for Non-M E9X vehicles

    Installation Notes:

    Requires an M6 RivNut tool and 10mm drill bit (25/64” bit optional)

    Simple installation with included hardware and instructions

    Show More Show Less