Subframe

The Powerflex Front Sway Bar Bushings and Strengthening Support Plate for the BMW E60/E61 M5 and E63/E64 M6 offer enhanced suspension performance.

• Improved Handling: Firmly secures the sway bar to reduce body roll and improve cornering stability.
• Durable Polyurethane: Lasts longer than rubber, resisting wear and contaminants.
• Strengthening Plate: Adds rigidity to the sway bar mounts, reducing flex under heavy loads for more precise handling.
• Better Stability: Provides sharper, more responsive handling during aggressive driving.

Perfect for M5 and M6 owners seeking enhanced handling and suspension support.

.

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

The Powerflex Rear Subframe Front Bushing Insert for the BMW E36 3 Series (1990-1998) is an essential performance upgrade designed to improve the rigidity and responsiveness of the rear suspension. This insert fits directly into the factory rubber bushings, providing enhanced handling and stability for a more enjoyable driving experience.

Key Benefits:

1. Increased Structural Rigidity: Made from high-quality polyurethane, the bushing insert significantly reduces flex in the rear subframe. This increased rigidity enhances stability during cornering and aggressive driving, resulting in improved traction and control.

2. Longevity and Durability: Unlike traditional rubber bushings that can wear out and degrade over time, Powerflex inserts are built to withstand harsh driving conditions. They resist deterioration from heat, oil, and road debris, ensuring consistent performance and durability over the life of the vehicle.

3. Enhanced Handling Performance: By minimizing unwanted movement in the rear suspension, these inserts optimize alignment and handling characteristics. This leads to more precise steering response and better cornering capabilities, providing drivers with a more connected and confident driving experience.

4. Direct Fit for Easy Installation: Specifically designed for the E36 3 Series, these inserts are engineered for a straightforward installation process. They fit directly into the existing front subframe bushings, requiring no modifications, making it an ideal upgrade for both DIY enthusiasts and professional mechanics.

5. Versatile Usage: Whether for daily driving, spirited weekend jaunts, or track applications, these inserts improve the overall performance of the rear suspension system. They help maintain tire contact with the road, enhancing grip and stability under various driving conditions.

This upgrade is perfect for BMW E36 3 Series owners looking to enhance their vehicle's rear suspension performance. The Powerflex Rear Subframe Front Bushing Insert offers a reliable solution for improving handling, stability, and overall driving enjoyment, making it a valuable addition for enthusiasts seeking a more engaging driving experience.

The Powerflex Rear Subframe Mount Front Insert for the BMW E39 5 Series is engineered to improve the rigidity and responsiveness of the rear suspension system. By replacing the factory rubber with high-quality polyurethane, this insert enhances the overall performance and durability of the subframe mount.

Key Benefits:

1. Enhanced Suspension Stability: The polyurethane insert significantly reduces unwanted movement and flex in the subframe mount. This leads to improved stability during cornering and a more planted feel, especially when navigating twists and turns.
2. Long-Lasting Durability: Designed to resist wear from environmental factors like oil, heat, and road debris, these inserts provide superior longevity compared to factory rubber components, which may deteriorate over time.
3. Improved Road Feedback: By minimizing flex in the subframe, the insert enhances steering response and feedback, allowing for a more connected and engaging driving experience. This is particularly beneficial for drivers who enjoy spirited driving or track days.
4. Direct Fit for Easy Installation: Specifically designed for the E39 5 Series, this insert easily fits into the existing subframe mount, making installation straightforward and requiring no modifications.

Ideal for BMW enthusiasts looking to elevate their E39 5 Series's handling and performance, this insert provides a reliable solution for enhancing the rear suspension system's effectiveness, suitable for both daily use and performance-oriented driving.