Control Arm Bushings

Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Our sealed Monoball Rear Trailing Arm Bushings (RTAB) are the best solution for completely eliminating deflection and unwanted toe changes on the rear of the E36, E46, and Z4. While rubber and urethane bushings flex during load, the toe can change widely giving you nervous and unpredictable handling. These RTABs have a solid aluminum housing with a high-quality sealed OE bearing. These bushings were developed from years of competition use in various racing and HPDE events. There is simply no better RTAB unless your racing class rules prohibit the use of mono or spherical bearings.

The rear trailing arm bushings take a lot of abuse from acclerating, braking and cornering. The stock rubber bushings are just not up to the task of keeping rear wheel alignment in spec for very long, especially if you have upgraded to stickier tires and a better suspension. The pliable rubber flexes and twists which slows down reaction time and leaves you with a car that feels nervous and 'tail happy'. Urethane helps to control the alignment but issues with fitment, maintenance, and longevity keep us from recommending urethane on anything but a street car. We also offer a Delrin RTAB for cars that must conform to certain racing class rules. These sealed spherical bearings are the best at controlling rear toe alignment.

Our aluminum RTABs are very well made - high grade aluminum alloy and steel CNC'd out of a billet by an ISO 9001 certified manufacturer, each component is either hardcoated or nickel plated. While multiple manufacturers offer two piece designs, our research showed that a one piece bushing is a better design featuring a sealed bearing to keep contaminants out extending the life of the bearing.

Features:

Key Benefits:

• Rear Trailing Arm Monoball eliminates unwanted deflection, maintaining alignment settings and minimizing wheel hop.
• Allows full rear trailing arm articulation for low friction movement and eliminates binding found in rubber and poly bushings.
• Completely streetable: utilizes an OES Lemforder brand sealed, greased ball joint for an extremely long service life with no increase to NVH.

Design Features:

• Housing: Billet CNC 6061-T6 aluminum, type II anodized for exceptional durability and corrosion resistance
• Bearing: OE Mercedes/lemforder 2043520027 Sealed ball joint
• Bearing inserts: CNC machined 303 stainless steel.
• Rebuildable

Clickhere for installation instructions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Stock rubber front control arm bushings are designed to allow significant fore/aft movement of the front wheels to help absorb road impacts.  This soft flexible design maximizes daily driving comfort and helps to add the “luxury” feeling to your BMW, but it is far from ideal for the performance or racing enthusiast that is looking for optimal handling and braking performance.  Being a bonded rubber bushing that is constantly twisting and deflecting when in use, stock rubber bushings really take a beating and often fail prematurely, resulting in further degraded handling, braking shimmy or even clunking felt under your feet.

In the past, the only upgrade option to improve handling of your E46 M3 was to replace the stock rubber with poly bushings, or delrin bushings that wear prematurely and are not serviceable or rebuild-able.  While well-designed poly bushings can vastly improve handling characteristics and offer good road feel with minimal increase to NVH, they are still a compromise when it comes to ultimate handling and braking performance.

Introducing the new Turner Front Control Arm Spherical Bearings!  The Turner engineering team set out to design a no-compromise solution that requires no modification and offers instantaneous cornering and braking response.  Our control arm bearings utilize a unique grease-able spherical bearing that is both serviceable and replaceable, with integrated dust seals to help keep dirt and moisture out.  This bearing offers considerable improvement in both precision and durability compared to other unsealed poly and delrin bushing inserts previously available, which can wear prematurely due to contamination.  The bearing assembly utilizes the highest quality materials, precision machining quality, and components to ensure a perfect fit and longest lasting component life possible.

The result is the ultimate in terms of low friction, no binding, and no unwanted deflection, as well as exceptional steering precision, turn-in response, and direct braking feedback with minimal increase in NVH.  These spherical bearings are a must have for any track car, but are also completely street-able and are a great upgrade for any enthusiast that enjoys spirited driving.

Features:

Bearing

• Extremely robust, greaseable, double lip sealed spherical bearing (Rated for 20,000lbf Dynamic, 90,000lbf Static). 

Housing

• 6061-T6, anodized housing with needle grease zerk for easy maintenance. 
• In house designed knurled OD to provide the perfect fit for the wide range of housing diameters among brands. 

Bearing Insert Arm adapter

• Precision CNC machined Delrin, providing a tight fit between the bearing and the control arm. 

Performance

• Instant, crisp steering and braking response.
• Easy to maintain, long lasting performance. 
• Improved road feel without undesirable NVH.

Grease before installation and with each oil service with high quality Moly grease for maximum service life.  Need a Grease tool?

Here at Turner we understand the importance of an upgrade that will get the results you need on the track and still be tolerable on the drive around town. When it comes to control arms on the track, making them as stiff as you can (usually using solid mounts) is the best way to increase your driving precision by eliminating the deflection of rubber. The next best thing to create a balance would be to stiffen up the control arm with polyurethane, giving you the option of a more stock like feel with 80a or closer to the solid feel with 95a durometers.

When it comes to the E36 chassis you also get the options of choosing a stock centered design or going with the E30 inspired offset bushing to increase castor, further taking advantage of improvd handling. These poly bushings will give your control arms a direct connection between your suspension and the body of the car eliminating the slop felt under take-off and braking so you feel more in control of your vehicle.

This item fits the following BMWs that use a centered-style bushing: 

1984-1991 E30 BMW 318i, 318is, 325, 325e, 325es, 325i, 325is 
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3 S52
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i MZ3 M Coupe M Roadster