Bilstein BMW Coilovers for Street Use

The B16 PSS9 coilovers offer a stiffer spring rate than stock and a lower ride height for less bodyroll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

Bilstein's monotube shock dampers in the PSS9 offer 9 precise settings for compression and rebound. A new setting is just a click away, allowing you to set a ride and handling combination that works for your setting. Instead of offering too many shock settings that you're never going to use, Bilstein has chosen ten optimal damping curves from a smooth street setting (P9) to an ultra-stiff track-only setup (P1). Shock changes are made from an easy-to-use over-sized adjuster knob.

Ride height adjustments are done from perches that ride on each shock body, which are zinc coated for excellent wear and corrosion resistance. You can set the ride height between 0.5 to 1.3 inches lower than stock ride height. Springs are progressively rated so their initial compression rating is quite soft and then becomes stiffer as the spring compresses. These are stiffer than most coil over kit manufacturers and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock strut and shock mounts. You can re-use your own or choose a mount with additional features. Because the Bilstein design keeps the sway bar tab in the original location, you can re-use the stock sway bar links. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as a the factory strut. In the rear, ride height is made by an adjustable spring perch that sits under the rear spring. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS9. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Fitment note: this system works only on cars not equipped with the factory EDC electronically adjustable shocks.

Featuring:

• Largest available piston diameter for greater sensitivity and precise control.
• Patented digressive piston head design and deflective valving instantly reacts to changing road conditions.
• 9-way adjustable dampening knobs that "click" from soft to hard with no tools or jacking required.
• Monotube design dissipates heat more effectively than a twin tube shock for cooler, more efficient operation and longer life.
• Weather resistant coating to resist oxidization, and ensure long life.
• Lighter weight reduces wear and tear on suspension components.
• Wrenches to adjust front and rear ride height included!

This Bilstein PSS9 coilover kit fits the following BMWs:
2004-2005 E63 645Ci coupe
2004-2005 E64 645Ci convertibe
2006-2010 E63 650i coupe
2006-2010 E64 650i convertible

Bilstein EVO S Coilover Kit - Front & Rear - 21-24 BMW 330e XDrive delivers precision handling and a sleek, aggressive stance for street-driven performance. Designed for enthusiasts who demand both comfort and control, this coilover kit offers ride height adjustability while maintaining a refined driving experience. With threaded-bodied dampers, it allows for lowering up to 70mm, giving your BMW a striking look without sacrificing everyday drivability. Built with high-quality OE components, this suspension system ensures long-term reliability. Engineered in Germany and tested on the Nürburgring, the Bilstein EVO S Coilover Kit provides enhanced cornering stability and responsiveness.

• Performance-tuned suspension – Improves handling and stability while maintaining street comfort
• Adjustable ride height – Offers up to 70mm of lowering for a custom stance
• Direct-fit installation – OE-quality construction for seamless compatibility with factory components
• Enhanced aesthetics – Achieves a sportier, more aggressive look without compromising ride quality
• German-engineered precision – Nürburgring-tested for optimal performance and durability

BMW G30 Bilstein EVO T1 Coilover Kit - Front & Rear - 21-24 330e is the ultimate suspension upgrade for enthusiasts seeking superior handling and performance on both the street and track. Designed for precision tuning, this coilover kit features ride height adjustability and a 10-stage manually adjustable damping system, allowing fine-tuned control of both rebound and compression. With threaded-bodied dampers, it enables extreme lowering of up to 70mm, providing enhanced stability, traction, and cornering speed. Built with high-quality components, this system ensures consistent performance for every driving condition. Engineered in Germany and tested on the Nürburgring, the Bilstein EVO T1 Coilover Kit delivers unmatched durability, handling precision, and an aggressive stance.

• Street & track performance – Optimized for daily driving with the ability to handle track conditions
• 10-stage damping adjustability – Customizable rebound and compression settings for precision handling
• Ride height adjustability – Allows lowering up to 70mm for improved aerodynamics and an aggressive stance
• Durable OE-grade construction – Built for long-lasting performance and reliability
• German engineering – Nürburgring-tested for enhanced handling, stability, and cornering control

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

• Precise response and excellent driving performance
• Springs and shocks road tested and fine-tuned to complement one another
• Bilstein Monotube/Inverted gas pressure technology
• TUV certified
• Made In Germany
• Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
2008-2013 E82 BMW 128i