Find Parts That Fit Your Vehicle

BMW Coilovers for Street Use

There are several coilover options on the market - while a lot of this decision boils down to preference, we categorize coilovers as aEURoestreetaEUR based on price and comfort level. Coilovers in our street category will be comfortable enough to use on your daily driver, but perform well enough to handle occasional autocross days and light track use. These coilovers also won't break the bank. However, many of the options we have under street coilovers share many of the same features as our track coilovers, they often just utilize less durable materials and won't hold up as well to torcher testing.

This category contains parts that fit the following chassis:

Sort By:

BC Racing BR Series Extreme Low Coilovers - Z4 sDrive 28i/30i/35i/35i...

T#:568078

Part#: I-47E-BR

Ships on Sep 3, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

BR Series BMW Coilover Suspension Kit With Swift Springs Upgrade - BC...

T#:567343

Part#: I-02-BR-SW

Ships on Sep 3, 2026

$ 1,665.00 USD

Add to Wish List

Qty

$ 1,665.00 USD

Add to Wish List

F22/F23 KW V2 Series Coilover Kit

T#:590906

Part#: 1522000Q

Back Ordered

$ 2,594.00 USD

Add to Wish List

Qty

$ 2,594.00 USD

Add to Wish List

The KW V2 coilovers are intended for the experienced drivers who not only wish to adjust ride height, but also want to determine the rebound characteristics. Rebound dampening primarily controls the pitch and roll of the vehicle, especially in the low speed dampening range which directly influences handling and comfort. The rebound adjustment is externally adjustable via an adjustment spindle at the top of the shock.

Show More Show Less

KW V2 Coilover Kit - BMW G26 430i

T#:50832700

Part#: 152200DW

Ships in 4 Business Days

$ 3,024.00 USD

Add to Wish List

Qty

$ 3,024.00 USD

Add to Wish List

The KW V2 offers a sophisticated suspension solution for the 2023+ BMW 430i Gran Coupe.

Road & Track Coilover Suspension Xdrive

T#:20518575

Part#: BMS MW10S1

In Stock at Vendor

$ 3,668.99 USD

Add to Wish List

Qty

$ 3,668.99 USD

Add to Wish List

KW Coilover Kit V3 - BMW G20 M340i RWD (with EDC)

T#:5282890

Part#: 352200CM

In Stock at Vendor

$ 3,784.00 USD

Add to Wish List

Qty

$ 3,784.00 USD

Add to Wish List

The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use

Show More Show Less

BR Series Coilover Suspension Kit With DDC - F55/F56/F57

T#:23615474

Part#: T-04-BR

Ships in 5 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Upgrade your Mini's suspension system with the BC Racing BR Series Coilover Suspension Kit, engineered for exceptional street and track performance. These coilovers are compatible with the Dynamic Damper Control (DDC) system, offering 30 levels of simultaneous compression and rebound dampening adjustments. Featuring a 2-inch minimum ride height drop, they are ideal for both track and street driving conditions. Constructed with high-grade materials like 6061-T6 Aluminum, STKM13C steel, and SAE9254 steel springs, these coilovers ensure durability, reliability, and corrosion resistance. With 6k front and 5k rear spring rates and V-Barrel springs, these coilovers guarantee optimal performance and a perfect fit for your Mini.

Compatible with Dynamic Damper Control (DDC) system
30 levels of simultaneous compression and rebound dampening adjustments
2-inch minimum ride height drop for versatile use
High-grade materials ensure durability and corrosion resistance
Specifically valved for spring style and rate
Ideal for track, street, and varied driving conditions

Show More Show Less

KW V3 Coilover Kit - BMW G26 i4 e35/e40

T#:50766806

Part#: 352200ET

Ships in 4 Business Days

$ 3,944.00 USD

Add to Wish List

Qty

$ 3,944.00 USD

Add to Wish List

The KW V3 is the definitive suspension solution for the RWD BMW i4.

BC Racing ZR Series Coilover Suspension Kit - Without Rear Pillowball...

T#:4333515

Part#: I-03-ZR

Ships in 5 Business Days

$ 2,835.00 USD

Add to Wish List

Qty

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

Bilstein EVO T2 Coilover Kit - BMW G20 330i M340i, G22 430i

For vehicles without adaptive electronic suspension

T#:28570846

Part#: 48-313063

Ships in 3 Business Days

$ 4,088.99 USD

Add to Wish List

Qty

$ 4,088.99 USD

Add to Wish List

Improve your BMW's ride height and handling performance with Bilstein's new EVO T2 Coilover kit! The EVO T2 Coilover kit features Bilstein's 10x10 Pro-Click adjustment system, allowing for 100 adjustment possibilities for compression and rebound to dial in the exact handling characteristics necessary for the street or track. The individual lowering not only looks great, it also significantly optimises the handling of your car: the lower centre of gravity enables higher cornering speeds and faster lap times on the track. And the best thing is: with the EVO T2 you are always on the safe side. The premium coilover suspension naturally comes with a parts certificate and has appropriately dimensioned threads to spare even when lowered more. What’s more, the tyres and wheel arch fit perfectly – technically without any problems and visually appealing. The EVO T2 uses our 10×10 Pro-Click adjustment system: this allows the high-performance suspension to be adjusted separately in both rebound and compression via two aluminium adjustment wheels, easily and without tools: as a new development, the EVO T2 adjusts the compression damping not only at the valve on the piston rod, but also at the special bottom valve. In this way, a total of 100 different damper set-ups are possible – perfect for your individual riding style and the characteristics of the race track. Our engineers have perfected the characteristic curves for you in the legendary BILSTEIN road test. So you can expect highly dynamic damper characteristics for the sportiest steering behaviour in every everyday situation and on the track: the EVO T2 impresses with a sporty, precise steering feel and even more direct contact with the road. Features: Individual and steplessly adjustable lowering of up to 70 mm (varies depending on model, equipment variant and motorisation) Two aluminium adjustment wheels and 100 adjustment possibilities: the 10×10 Pro-Click adjustment regulates rebound and compression separately and safely for an absolutely individual damper setup Damper setting tuned by the BILSTEIN experts Sporty, precise steering feel and even more direct contact with the road High driving pleasure and maximum longevity Paintwork according to the highest OEM standards Additional corrosion protection through zinc-nickel coating for EVO performance coilovers

Show More Show Less

BR Series Coilover Suspension Kit

T#:36032377

Part#: T-10-BR

Ships in 5 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

KW Coilover Kit - Variant 1 (V1) - E93 M3 Convertible

T#:338247

Part#: 10220063X

Ships in 4 Business Days

Starting at $ 2,344.00 USD

Add to Wish List

Starting at $ 2,344.00 USD

Add to Wish List

Factory Pre-set Damping

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,

Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,

Individually height-adjustable - Front = 10-35mm lowering; Rear = 5-35mm lowering,

TUV approved lowering range and operation,

Expert engineering and design for ease-of-use and long durability,
This is the ideal coil over kit for a E93 M3 Convertible owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

Lifetime warranty!

These KW Variant 1 coil overs fit the following BMWs:
2008-2013 E93 BMW M3 - Convertible

Project Cars

SELECT YOUR BMW

BMW Coilovers for Street Use

BC Racing BR Series Extreme Low Coilovers - Z4 sDrive 28i/30i/35i/35i...

BR Series BMW Coilover Suspension Kit With Swift Springs Upgrade - BC...

F22/F23 KW V2 Series Coilover Kit

KW V2 Coilover Kit - BMW G26 430i

Road & Track Coilover Suspension Xdrive

KW Coilover Kit V3 - BMW G20 M340i RWD (with EDC)

BR Series Coilover Suspension Kit With DDC - F55/F56/F57

KW V3 Coilover Kit - BMW G26 i4 e35/e40

BC Racing ZR Series Coilover Suspension Kit - Without Rear Pillowball...

Bilstein EVO T2 Coilover Kit - BMW G20 330i M340i, G22 430i

BR Series Coilover Suspension Kit

KW Coilover Kit - Variant 1 (V1) - E93 M3 Convertible

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results