Find Parts That Fit Your Vehicle

BMW Coilovers for Street Use

There are several coilover options on the market - while a lot of this decision boils down to preference, we categorize coilovers as aEURoestreetaEUR based on price and comfort level. Coilovers in our street category will be comfortable enough to use on your daily driver, but perform well enough to handle occasional autocross days and light track use. These coilovers also won't break the bank. However, many of the options we have under street coilovers share many of the same features as our track coilovers, they often just utilize less durable materials and won't hold up as well to torcher testing.
Sort By:

KW Suspension - Corporate Logo
T#:367046
Part#: 10220006
Back Ordered
$ 2,044.00 USD
Free Shipping
$ 2,044.00 USD
Free Shipping
KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
Show More Show Less
BC Racing - Corporate Logo
T#:4333544
Part#: I-03-ER
Back Ordered
$ 1,935.00 USD
Free Shipping
$ 1,935.00 USD
Free Shipping
The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
Show More Show Less
KW Suspension - Corporate Logo
T#:11677
Part#: 35220804
Back Ordered
$ 4,334.00 USD
Free Shipping
$ 4,334.00 USD
Free Shipping
Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs - 2 Way Adjustable

KW Clubsport coilovers was developed for E85 Z4 owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 20-50mm, Rear - 15-40mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 400 lbs/inch, Rear Progressive.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment note: wheel spacers may be required depending on wheel sizing and offset.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:349058
    Part#: 352200AB
    Back Ordered
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-55mm lowering; Rear = 35-60mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2013+ F31 BMW 328i xDrive - Wagon
  • Show More Show Less

    Suspension Techniques - Corporate Logo
    T#:599111
    Part#: 13220004
    Back Ordered
    $ 1,089.00 USD
    Free Shipping
    $ 1,089.00 USD
    Free Shipping
    Designed in conjunction with KW Germany, ST X coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST X coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:5282889
    Part#: 152200CM
    Ships in 4 Business Days
    $ 3,024.00 USD
    Free Shipping
    $ 3,024.00 USD
    Free Shipping
    The KW V2 coilovers are intended for the experienced drivers who not only wish to adjust ride height, but also want to determine the rebound characteristics. Rebound dampening primarily controls the pitch and roll of the vehicle, especially in the low speed dampening range which directly influences handling and comfort. The rebound adjustment is externally adjustable via an adjustment spindle at the top of the shock. KW V2 kits offer: Stainless Steel "Inox-Technology" High quality component parts for durability Adjustable rebound dampening technology Lowering range approved by the TüV Fully finished complete solutions
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:596969
    Part#: 352200BP
    Back Ordered
    $ 3,634.00 USD
    Free Shipping
    $ 3,634.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - 

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability, 

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 
    Cars with EDC will require the EDC Cancellation Kit (not currently available). Cars without EDC do not need any extra materials. 

    Lifetime warranty! 

    This item fits the following BMWs: 
    2016+ F48 BMW X1 s/xDrive28i

    Show More Show Less
    BC Racing - Corporate Logo
    T#:23615476
    Part#: T-08-BR
    Back Ordered
    $ 1,195.00 USD
    $ 1,195.00 USD

    Revamp your Mini's performance with BC Racing's BR Series coilover suspension kit. Known for over a decade for their adjustable, street-and-track capable coilovers, BC Racing offers effective solutions without breaking the bank. Here are the key benefits of this suspension upgrade:

    • Completely compatible with all stock mounting locations and components
    • Versatile and popular suspension setup with linear springs (where applicable)
    • 30 levels of dampening adjustment for simultaneous compression and rebound control
    • 2-inch minimum ride height drop for enhanced aesthetics and performance
    • Dyno tested for optimal valving and spring rates specific to each chassis
    • Upper shock and strut mounts made of lightweight and sturdy 6061-T6 Aluminum
    • Front design options include Caster/Camber Plates, Camber plates, and Rubber Mount Plates
    • Up to 3 degrees of camber adjustment with adjustable plate designs
    • Option of Rubber Mount Plates to minimize unwanted NVH
    • Lower shock mounts constructed from corrosion-resistant materials like 6061-T6 Aluminum or high-quality STKM13C steel
    • Springs made of SAE9254 steel with Zinc coating for rust prevention
    • Utilization of different shock types, lengths, and diameters for various vehicles
    • Hand-assembled and dyno-tested shocks for quality and performance
    • Coated in black chrome for durability and a sleek appearance
    Show More Show Less

    BC Racing - Corporate Logo
    T#:4333512
    Part#: I-02-ZR
    Back Ordered
    $ 2,835.00 USD
    Free Shipping
    $ 2,835.00 USD
    Free Shipping
    BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:4908003
    Part#: 102200CX
    Back Ordered
    $ 2,184.00 USD
    Free Shipping
    $ 2,184.00 USD
    Free Shipping
    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features: Pre-set damping optimized for a blend of ride comfort and handling with less body roll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrosion resistance, Individually height-adjustable (Front & Rear Lowering: 1.2"-2.0") TUV approved lowering range and operation Expert engineering and design for ease-of-use and long durability, This is the ideal coil-over kit for a BMW owner who does not plan on tracking or autocrossing the car often and mainly just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock, the Variant 1 is an excellent choice. Coil over suspensions are better-engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil-overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:1150781
    Part#: 352208DT
    Back Ordered
    $ 4,154.00 USD
    Free Shipping
    $ 4,154.00 USD
    Free Shipping

    MINI F56 JCW GP3 KW Clubsport Coilover Kit is engineered for drivers demanding superior handling on the track and the flexibility to drive on the street. Designed with track day enthusiasts in mind, this coilover kit includes independently adjustable rebound and compression damping, allowing precise suspension tuning based on vehicle load, tire characteristics, and track conditions. With high-performance linear race springs and optional racing top mounts for camber adjustment, the KW Clubsport kit delivers unparalleled agility and lap time performance.

    • Independently adjustable rebound and compression damping
    • High-performance linear race springs for enhanced handling
    • Stainless steel Inox-Line technology ensures durability and corrosion resistance
    • Optional racing top mounts for camber adjustments
    • TÜV-approved lowering range: front 1.0"–2.0", rear 1.2"–2.6"
    • Height adjustable on both front and rear axles
    • Designed specifically for the MINI Cooper JCW GP3
    Show More Show Less
    BC Racing - Corporate Logo
    T#:4319899
    Part#: I-03-RM
    Back Ordered
    $ 1,495.00 USD
    Free Shipping
    $ 1,495.00 USD
    Free Shipping
    BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:396822
    Part#: 352200BN
    Back Ordered
    $ 3,294.00 USD
    Free Shipping
    $ 3,294.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - 

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability, 

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 
    Cars with EDC will require the EDC Cancellation Kit (not currently available). Cars without EDC do not need any extra materials. 

    Lifetime warranty! 

    This item fits the following BMWs: 
    2016+ F48 BMW X1 s/xDrive28i

    Show More Show Less
    BC Racing - Corporate Logo
    T#:4347101
    Part#: I-80-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:34650260
    Part#: 152200AG
    Back Ordered
    $ 2,594.00 USD
    $ 2,594.00 USD

    BC Racing - Corporate Logo
    T#:4319924
    Part#: I-03-HM
    Back Ordered
    $ 2,535.00 USD
    Free Shipping
    $ 2,535.00 USD
    Free Shipping
    BC Racing's HM Coilover system offers the same great benefits of the RM Series with the addition of 2 way damping adjustment. Each HM Coilover system features inverted mono-tube dampers with independently adjustable compression and rebound. The inverted damper design moves vital damper fluid away from detrimental heat sources to avoid overheating which can cause damper fade under extreme track use. Know your safe from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Engineered for 100% track use * 30 levels of separate rebound and compression adjustment * Inverted damper design (depending on models) * Dual Piston design (1 res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty NOTE: LEAD TIMES FOR ALL NEW ORDERS ARE 4-8 WEEKS.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:1017098
    Part#: 3A7200DZ
    Back Ordered
    $ 8,774.00

    This product was last offered at the strikethrough price on
    02-08-2026

    $ 7,674.00 USD
    Free Shipping
    $ 7,674.00 USD
    Free Shipping
    The KW Variant 4 coilover injects top-level motorsport design into a coilover that is fully useable on the street in a day-to-day situation. Combining years of race-winning design and engineering with real-world testing, KW has introduced a line of coilovers that checks all the boxes and then some. If you are looking for maximum adjustability, reliability, and comfort then this is the kit for you. Lowering of 15-40mm Front and 15-40mm Rear. Two-Step Rebound Valve with Adjustable KW TVR-A Rebound Stage Damping Technology The rebound stage damping is precisely tuned to the respective vehicle on our in-house drive dynamics test facility, with the setting fixed in the mid-range. Individual customization can be achieved in 16 precise click positions, allowing you to choose between more comfort or more body control. The two-step patented TVR-A technology allows the damper oil to flow through an adjustable, conical low-speed valve during slow piston speeds, while during higher piston speeds the main rebound stage valve opens to handle the flow of large volumes of oil. This provides a major improvement in ride comfort without influencing the high-speed in the safety-relevant zone. Two-Step Compression Stage Valve with Low and High-Speed KW TVCLH-A Adjustment Technology This is the high-end motorsports technology for the most demanding street and track performance customers. Two separate valves and a two-way adjustable compression stage valve allow separate compression damping changes in the low and high-speed range. The adjustments are made via two adjustment dials with click increments that feature 16 settings (with 15 clicks) in the high-speed valve housing and 7 settings (with 6 clicks) in the low-speed housing. During tuning at the KW drive dynamics test facility, the groundbreaking V4 coilover suspension is tuned to a mid-level basic setting for the best road performance with an additional recommended setting for occasional track day use. The 3A Clubsport coilover suspension is tuned to a mid-level factory setting especially for track day use, with an additional recommended setting for the drive to the race track. Starting from the factory setting, the damping can be set firmer or softer for low and high-speed. External Reservoir The use of KW reservoirs provides additional volume for additional oil and additional cooling capacity for extremely high-performance setups. The reservoir is filled with low gas pressure and can be fitted anywhere and accommodates the adjustable compression stage valve to provide the damper with more working space. Additional Features: Uniball Top Mount Trapezoidal Threads Stainless Steel Innox Construction Composite Spring Seats
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:349082
    Part#: 352208AK
    Back Ordered
    $ 4,584.00 USD
    Free Shipping
    $ 4,584.00 USD
    Free Shipping
    KW Clubsport coilovers were developed for customers who demand a better handling car when participating in track day events, but also require a setup that could be used on the street. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the optional adjustable top mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. These adjustment options, combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport Coilovers meet every demand regarding a coilover for the usage on the road and the race track.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:341736
    Part#: 180200AD
    Back Ordered
    $ 2,764.00 USD
    Free Shipping
    $ 2,764.00 USD
    Free Shipping
    KW street comfort - The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort. Maximum driving comfort for a perfect performance and more driving pleasure Guarantees more comfort, flexibility and sportive as regular OE sport suspensions Comfortable adjustment Better handling due to less body roll TUV approved lowering range Individually height-adjustable - Front - 10-40mm, Rear - 20-40mm Trapezoid thread for a easy height adjustability High quality damper components for a long durability Adjustable rebound damping Complete detailed documentation for easy use. When using original tires, wheel spacers may be required.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50766790
    Part#: 3A7200ER
    Back Ordered
    New Item
    $ 7,894.00 USD
    Free Shipping
    $ 7,894.00 USD
    Free Shipping
    A suspension system designed for those who refuse to compromise.

    BC Racing - Corporate Logo
    T#:4333542
    Part#: I-02-ER
    Back Ordered
    $ 1,935.00 USD
    Free Shipping
    $ 1,935.00 USD
    Free Shipping
    The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:598968
    Part#: 352200CQ
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:348844
    Part#: 35220026
    Back Ordered
    $ 3,684.00 USD
    Free Shipping
    $ 3,684.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-60mm lowering; Rear = 25-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    The factory EDC system must be disabled with the KW EDC Cancellation Kit.

    Lifetime warranty!




    This item fits the following BMWs:
    2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:5457385
    Part#: 397202CG
    Back Ordered
    $ 6,664.00 USD
    Free Shipping
    $ 6,664.00 USD
    Free Shipping


    KW Suspension - Corporate Logo
    T#:338242
    Part#: TMS338242
    Back Ordered
    Starting at $ 1,589.00 USD
    Starting at $ 1,589.00 USD
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F33 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2013+ F33 BMW 428i Convertible
    2014+ F36 BMW 428i Gran Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731734
    Part#: 102200FB
    Back Ordered
    New Item
    $ 2,494.00 USD
    Free Shipping
    $ 2,494.00 USD
    Free Shipping
    Delivers a pre-set damping profile that perfectly bridges the gap between aggressive driving and everyday comfort.
    KW Suspension - Corporate Logo
    T#:361873
    Part#: 35220090
    Back Ordered
    $ 4,044.00 USD
    Free Shipping
    $ 4,044.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 15-45mm lowering; Rear = 10-40mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:50766801
    Part#: 352200FA
    Back Ordered
    New Item
    $ 3,784.00

    This product was last offered at the strikethrough price on
    02-19-2026

    $ 3,474.00 USD
    Free Shipping
    $ 3,474.00 USD
    Free Shipping
    Gives you total authority over your car’s dynamics.

    BC Racing - Corporate Logo
    T#:598283
    Part#: I-25-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50826640
    Part#: 35220029-B
    Back Ordered
    New Item
    $ 3,254.00 USD
    Free Shipping
    $ 3,254.00 USD
    Free Shipping
    The KW V3 is the premier suspension solution for the 1995–2001 BMW 7 Series.

    KW Suspension - Corporate Logo
    T#:348917
    Part#: 39020003
    Back Ordered
    $ 4,894.00 USD
    Free Shipping
    $ 4,894.00 USD
    Free Shipping
    Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.2 - 2.2" Rear:1.0 - 2.0"
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11666
    Part#: 35220084
    Back Ordered
    $ 4,594.00 USD
    Free Shipping
    $ 4,594.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50828462
    Part#: 35208200DA
    Back Ordered
    New Item
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    Designed specifically for those who prioritize unadulterated directness and sportier handling without the drawbacks of traditional lowering kits

    KW Suspension - Corporate Logo
    T#:5282902
    Part#: 352200DM
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11581
    Part#: 15220003
    Back Ordered
    $ 2,644.00 USD
    Free Shipping
    $ 2,644.00 USD
    Free Shipping

    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 30-60mm lowering; Rear = 25-55mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Not for models with self-leveling or EDC suspension.

    Lifetime warranty!

    This item fits the following BMWs:
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si

     

    Show More Show Less
    BC Racing - Corporate Logo
    T#:36066232
    Part#: T-09-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping


    KW Suspension - Corporate Logo
    T#:349106
    Part#: 3522000V
    Back Ordered
    $ 4,784.00 USD
    Free Shipping
    $ 4,784.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:34650265
    Part#: 180200AH
    Back Ordered
    $ 2,644.00 USD
    Free Shipping
    $ 2,644.00 USD
    Free Shipping
    BC Racing - Corporate Logo
    T#:598301
    Part#: I-73-DS
    Back Ordered
    $ 1,395.00 USD
    Free Shipping
    $ 1,395.00 USD
    Free Shipping
    The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50830562
    Part#: 352082000F
    Back Ordered
    New Item
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping
    The KW V3 Leveling system brings "unadulterated directness" to the BMW F30 and F32 platforms.

    BC Racing - Corporate Logo
    T#:4333517
    Part#: I-39-ZR
    Back Ordered
    2% off MSRP $ 2,895.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,835.00 USD
    Free Shipping
    2% off MSRP
    $ 2,895.00

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 2,835.00 USD
    Free Shipping
    BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11599
    Part#: 15220033
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping

    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 30-60mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!

    This item fits the following BMWs:
    2007-2012 E91 BMW 328i - Wagon
    2007-2013 E93 BMW 328i 335i - Convertible

     

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11647
    Part#: 35220049
    Back Ordered
    $ 3,344.00 USD
    Free Shipping
    $ 3,344.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 40-80mm lowering; Rear = 30-60mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!

    This item fits the following BMWs:
    2006-2012 E91 BMW 325xi 328xi 328i xDrive - Wagon

     

    Show More Show Less
    BC Racing - Corporate Logo
    T#:13233503
    Part#: I-109-BR
    Back Ordered
    $ 1,195.00 USD
    Free Shipping
    $ 1,195.00 USD
    Free Shipping
    BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only highly effective but also don't break the bank! The BR Series coilover suspension kit features mounting points and brackets that are compatible with all stock mounting locations and components. It is their most popular and versatile suspension setup, offering linear springs (where possible), 30 levels of dampening adjustment including simultaneous compression and rebound control, and a 2-inch minimum ride height drop. All BR Series kits are Dyno tested to determine the best valving and spring rates for each chassis and are tested for a minimum of 6 months before being released to the public to ensure ride quality and reliability. All upper shock and strut mounts are constructed of 6061-T6 Aluminum to ensure a lightweight and incredibly strong design. Front design options include Caster/Camber Plates, Camber plates, and Rubber Mount Plates. See below for the option fitted to your chassis's BR Series Kit. The adjustable plate designs allow for up to 3 degrees of camber adjustment. The Rubber Mount Plates are better for preventing unwanted NVH. Lower shock mounts are either made of 6061-T6 Aluminum just like the top mounts (Fork or Bolt Eye Style Mount) that have been milled from a single piece of material, or high-quality STKM13C steel with all brackets welded robotically. Both styles are then powder coated for corrosion protection and styling. All springs used, linear, S-barrel, and v-barrel, are made of SAE9254 steel and utilize a Zinc coating under a powder coating finish to ensure rust cannot penetrate the metal of the spring and compromise performance or reliability. Liner springs are used in places possible unless otherwise limited by the OE design of the vehicle that does not allow it. In that case, S-Barrel or V-Barrel springs are used to match OE shape/style specifications and the spring's rate is then matched to the linear rate. BC Racing creates their kits utilizing a wide variety of shock types, lengths, and diameters. Each vehicle depending on their data from R&D, and accounting for the OEM suspension design will utilize a different style of shock. Each shock is hand assembled in their factory and dyno tested before use in their kits. Shocks are paired together by their compression and rebound numbers after dyno testing for even and precise quality and performance. Each shock body used in their system is 53mm for added strength, performance, and increased fluid capacity (unless limited spacing will not allow it). The shocks are then coated in black chrome for a clean, cohesive appearance and corrosion resistance. Specs and Features: 8k Front & 5k Rear Spring Rate S-Barrel front & Linear rear springs Valved specifically to spring style and rate Aluminum and Rubber Front Mounts Rear Rubber Mounts Black Powder Coated Components All OE style brackets and mounting for a perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening 2-inch minimum and 3+ Inches of total potential drop Great for Track, Street, and any other conditions
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:3254057
    Part#: 3A7200EB
    Back Ordered
    $ 7,894.00 USD
    Free Shipping
    $ 7,894.00 USD
    Free Shipping
    Developed exclusively for super sports cars, sports cars and performance sedans, V4 coilovers are the ultimate in coilover technology featuring 3-way adjustable dampening and leading race technology for the highest street and track coilovers available.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:349025
    Part#: 1022000L
    Ships in 4 Business Days
    $ 2,384.00 USD
    Free Shipping
    $ 2,384.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    BC Racing - Corporate Logo
    T#:4333502
    Part#: I-10-RM-C
    Back Ordered
    $ 1,495.00 USD
    Free Shipping
    $ 1,495.00 USD
    Free Shipping
    BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES WILL BE 4-8 WEEKS.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:596992
    Part#: 35220091
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:363864
    Part#: 152200AC
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning the company consisted of only three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:5175672
    Part#: 1802000F
    Ships in 4 Business Days
    $ 2,454.00 USD
    Free Shipping
    $ 2,454.00 USD
    Free Shipping
    Is your sport suspension kit is too hard for you? Do you want a sporty yet dynamic suspension while retaining ride comfort? With street comfort suspension KW offers you the solution, you can create that sportive look while keeping as much comfort as possible. Long trips on the highway will be a pleasure; fun can be had on county roads. KW street comfort – The most individual sport suspension with maximum comfort With the individual height adjustable KW street comfort coilover kit a lowering of 10-40mm can be realized, depending on the vehicle. This way the customer has the flexibility to improve the look, with consideration of bigger wheels and tires. At the same time the lowering has a positive effect on the driving dynamics and road contact. With discreet but effective lowering more spring travel will be left to combine a comfortable spring with harmonic damper, this way the best driving comfort is guaranteed. With this product KW offers the perfect compromise of driving dynamic and driving comfort.
    Show More Show Less