Showing 722 results for ""

B46/B48 Center Muffler and Resonator Delete - F30/F31/F32/F33/F36:

Upgrade your F chassis with the B46/B48 3" Center Muffler and Resonator Delete for a deeper, more liberating exhaust tone. This modification offers a direct swap for the factory center exhaust section, effectively enhancing both sound and performance.

Experience a distinct shift in exhaust tone, accompanied by improved flow efficiency and the elimination of factory exhaust bottlenecks. The Turner Motorsport B46/B48 Resonator Delete replaces the cumbersome factory center muffler and resonator with lightweight, high-flow T304 stainless steel 3.0" exhaust tubing.

Not only does this upgrade deliver a more pronounced exhaust note, but it also contributes to a smoother flow path, reducing restrictions and enhancing overall performance. Plus, shedding approximately 6 lbs, this mid-pipe replacement offers a practical, cost-effective solution for those seeking an enhanced driving experience without the need to replace the entire exhaust system. Fully compatible with both the front downpipe and rear muffler, it's a seamless addition to your vehicle's setup.

Features and benefits:

Enhanced exhaust tone Simple installation (with instructions!) 6lb weight savings! (Removes center muffler and center resonator) Good looking and durable 304 stainless steel construction Heavy-duty fabricated sheet metal exhaust hangers Direct bolt-on to the factory downpipe Includes factory front clamp and rear sleeve clamp for full installation Kit Includes:

Front exhaust section Mid-pipe exhaust Section Factory downpipe exhaust clamp Rear muffler sleeve clamp Installation and Support:

Installation is as easy as cutting, placing into position, and clamping! Tools you might want for the job: Exhaust hanger removal pliers - T379176 Exhaust pipe cutter - T38545 - CLICK HERE FOR INSTALLATION INSTRUCTIONS -

High-Performance Ignition Service Kit - Gen 1 B48/46 2.0L:

High performance ignition kit for your Gen 1 B46/48 featuring spark plugs, Turner high performance ignition coils and dielectric grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance New spark plugs and grease Direct fitment Signature Turner Blue ignition coils

Includes $60.00 core charge to be refunded on return of your rebuildable core.

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Enhance Your Mini's Performance with Brisk Silver Racing Spark Plugs

Enhance your Mini's engine performance with Brisk Silver Racing Spark Plugs, an ideal solution for high-performance and racing engines. Featuring superior conductivity, these silver spark plugs offer enhanced ignition ability, resulting in a more complete combustion process and increased engine power. Benefit from improved combustion efficiency and horsepower gains with Brisk Silver Racing Spark Plugs.

Key Benefits of Brisk Silver Racing Spark Plugs:

• Best conductor for electricity and heat, ideal for performance engines
• Superior ignition ability leads to increased engine power
• Lower required ignition voltage for efficient spark
• Resistant to fouling and enables easier starts
• Suitable for race engines, supercharged, turbocharged, and nitrous engines
• Excellent for total loss ignition systems and high mileage vehicles

MINI B46 B48 Spark Plug is an essential component for maintaining the optimal performance of your engine. When spark plugs become worn, symptoms such as poor idle, reduced fuel efficiency, and engine misfire codes may arise. These issues are often caused by excessive carbon build-up and a worn electrode, which can affect the spark plug's ability to ignite the fuel-air mixture effectively. Replacing your spark plugs regularly as part of routine maintenance ensures that your engine continues to run smoothly.

Manufactured by Bosch, an Original Equipment Supplier (OES), these spark plugs are designed to meet the exact specifications of your MINI, ensuring reliable ignition performance and long-lasting durability.

• Improves engine performance: Reduces issues like poor idle, low fuel efficiency, and engine misfires.
• High-quality construction: Made by Bosch, an OES supplier, ensuring OEM quality and reliability.
• Prevents carbon build-up: Regular replacement helps avoid excessive carbon deposits and electrode wear.
• Maintains fuel efficiency: Keeps your engine running efficiently by ensuring effective ignition.
• Easy maintenance: Direct replacement for your MINI B46 B48, making regular maintenance straightforward.

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

• MSD Coil Pack
• MSD Wire Set - Red
• Inductance: 7mH
• Maximum Voltage: 36,000 Volts
• Primary Resistance: 0.51 OHMs
• Secondary Resistance: 12K OHMs
• Turns Ratio: 77:1

Key Benefits:

• Upgraded performance over stock coil pack
• Enhances ignition efficiency and engine performance
• High voltage output of 36,000 volts for stronger sparks
• Low primary resistance of 0.51 OHMs for efficient energy transfer
• High secondary resistance of 12K OHMs for improved performance
• Durable construction for long-lasting use