BMW Ignition Coils

If your engine is throwing a misfire code, there's a good chance the ignition coil is on its way out. Ignition coils are key components in your engine's ignition system, responsible for generating the spark that fuels the combustion process. When they fail, you can experience weak or intermittent sparks, leading to misfires, decreased engine power, and poor overall performance.

If you’re looking to address ignition problems or simply upgrade your setup, consider our High-Performance Ignition Coils! Our ignition coils are engineered to deliver superior spark energy, ensuring smoother, more efficient combustion. Not only will they improve engine performance, but their vibrant blue design and TURNER branding will also give your engine bay a sleek, high-performance look.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engine's health, performance, and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features & Benefits:

Increased performance! Our performance ignition coils offer a much-needed increase in spark energy, granting your engine a stronger, more consistent spark. Direct plug-and-play upgrade for BMWs equipped with N63B44T3 (N63B), S63B44T4 (S63M), and S68 (S68T). The coil body is finished in our signature "Turner blue" and features a laser-etched, resin-coated Turner insignia. The spark plug boot is constructed from durable rubber and is pre-lubricated with dielectric grease for easy installation. Note: Not all N63B and S63M applications use the same ignition coil. Many S63B44T4/S63M applications—including the F90 M5 and F91/F92/F93 M8—use the older "N Series" ignition coil architecture. If your N63/S63-equipped BMW utilizes the older "pencil style" ignition coil, you can find the Turner Motorsport Performance version HERE.

Transform your N55-powered BMW with the Turner Motorsport B58 Ignition Coil Conversion Kit—the ultimate solution for ignition system reliability and performance. Designed to eliminate the notorious misfires and power loss caused by factory OE pencil-style ignition coils, this kit is a game-changer for stock and modified vehicles alike. Whether you're chasing more power or improved drivability, the B58 ignition coils deliver up to 2.3x more spark energy, unleashing the full potential of your engine.

Why upgrade? The answer is simple: B58 ignition coils outperform all other ignition upgrades on the market with unparalleled spark energy and reliability. Ideal for high-performance builds or daily drivers, this kit eliminates common ignition problems while supporting increased power demands from software tunes like MHD or BM3. Plus, with the included plug-and-play wiring harness and proprietary boots, installation is seamless—no cutting or splicing is required.

Features:

Up to 2.3x More Spark Energy: Maximizes overall performance, offering sufficient output for heavily modified engines. Plug-and-Play Installation: Includes custom brackets, wiring harnesses, and boots designed for factory mounting locations—no modifications needed. DME Compatibility: Compatible with factory engine management software for hassle-free integration. Rugged Durability: Bolt-on brackets are precision-machined from 6061-T6 aluminum with a sleek black anodized finish for a premium look and long-lasting performance. Proprietary Design: Boots feature a built-in 1k OHM resistor to prevent electrical contact failures commonly seen in other kits. Kit Contents:

(6) Turner Motorsport B58 Ignition Coils (6) Turner Motorsport B58 Ignition Coil Conversion Boots (6) Turner Motorsport B58 Ignition Coil Conversion Wiring Harnesses (3) Turner Motorsport B58 Ignition Coil Conversion Brackets Optional Kit Selections:

Spark Plugs: Bosch ZGR6STE2 (OEM) NGK 97506 (One Step Colder) Spark Plug Socket: Schwaben 14mm 12pt Magnetic Socket Schwaben 14mm 12pt Swivel Socket Turner Motorsport offers a comprehensive installation guide, including detailed removal instructions and high-resolution images. Visit the Installation Tab for the step-by-step guide to completing your ignition system upgrade.

Say goodbye to misfires and hello to unparalleled ignition performance with the Turner Motorsport B58 Ignition Coil Conversion Kit. Designed with precision and engineered for reliability, it’s the ultimate upgrade for your N55-powered BMW!

Designed with performance enthusiasts in mind, our Performance Ignition Service Kit is a plug-and-play upgrade for your BMW! This kit boosts spark energy and engine efficiency, featuring a full set of eight Turner Motorsport Performance Ignition Coils. Our coils provide a 10% increase in spark energy compared to stock ignition coils and are included in our lifetime replacement program for peace of mind. Additionally, the kit includes eight NGK 97506 spark plugs, which are one heat range colder for enhanced protection against pre-ignition and detonation, especially in tuned applications.

Turner Motorsport High Performance Ignition Coils - Set of Eight

Increased Performance: Produces up to 10% more spark energy output than stock! Performance Aesthetic: The attractive "Turner blue" coil housing includes a laser-etched resin Turner Motorsport logo. Plug & Play Upgrade: Exact fit for your N63B44T3 (N63B), S63B44T4 (S63M), or S68 (S68T). Lifetime Replacement: Backed by our Lifetime Replacement Program, protecting your purchase in the event of failure. NGK 97506 / SILZKBR8D8S Spark Plugs - Set of Eight

Fine wire, iridium-tipped center electrode Fine wire, platinum-tipped ground electrode Copper core aids in heat removal One heat range colder for N63B (N63B44T3), S63M (S63B44T4), and S68 (S68T). Upgrade your ignition system today with our Performance Ignition Service Kit and restore the power your engine deserves!

Note: Not all N63B and S63M applications use the same ignition coil. Many S63B44T4/S63M applications—including the F90 M5 and F91/F92/F93 M8—use the older "N Series" ignition coil architecture. If your N63/S63-equipped BMW utilizes the older "pencil style" ignition coil, you can find the Turner Motorsport Performance version HERE.

Our B Series ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Ignition coils are responsible for 1/3 the operation your engine and it would be smart to weigh the options when shopping. Turner B Series ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
Direct fitment
Signature Turner Blue finish

If your engine is throwing a misfire code, there's a good chance the ignition coil is on its way out. Ignition coils are key components in your engine's ignition system, responsible for generating the spark that fuels the combustion process. When they fail, you can experience weak or intermittent sparks, leading to misfires, decreased engine power, and poor overall performance.

If you’re looking to address ignition problems or simply upgrade your setup, consider our High-Performance Ignition Coils! Our ignition coils are engineered to deliver superior spark energy, ensuring smoother, more efficient combustion. Not only will they improve engine performance, but their vibrant blue design and TURNER branding will also give your engine bay a sleek, high-performance look.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engine's health, performance, and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features & Benefits:

Increased performance! Our performance ignition coils offer a much-needed increase in spark energy, granting your engine a stronger, more consistent spark. Direct plug-and-play upgrade for BMWs equipped with N63B44T3 (N63B), S63B44T4 (S63M), and S68 (S68T). The coil body is finished in our signature "Turner blue" and features a laser-etched, resin-coated Turner insignia. The spark plug boot is constructed from durable rubber and is pre-lubricated with dielectric grease for easy installation. When replacing your ignition coils, it's also a good time to change out those old spark plugs. Our Performance Ignition Service Kit includes these ignition coils and "one step colder" NGK spark plugs for a more comprehensive ignition system service.

Note: Not all N63B and S63M applications use the same ignition coil. Many S63B44T4/S63M applications—including the F90 M5 and F91/F92/F93 M8—use the older "N Series" ignition coil architecture. If your N63/S63-equipped BMW utilizes the older "pencil style" ignition coil, you can find the Turner Motorsport Performance version HERE.

Failing ignition coils or plugs can cause sputtering, rough idle, hesitation on acceleration, misfires, and a check engine light. Replace it with this blue Dinan Performance ignition service kit!

The kit includes:

• 6 Dinan Coils with locks
• 6 Bosch spark plugs
• 1 packet of American Grease Stick dielectric grease

Dinan ignition coils features:

• Up to 10% more energy output than stock.
• Blue housing with Dinan Logo.
• True upgrade, not just aesthetic.
• Direct plug-and-play.

MSD Performance Coil Pack for MINI

Before ordering, check whether you need round or flat pin connectors for your MINI's coil pack. The type of pin is determined by the connectors that link the coil to the wiring harness. To check, slide the red locking tab to the right, press down on the tab, and pull the connector off the coil. Examine the pins to see if they are flat or round. Reattach the connector by pushing it back on until it clicks, then slide the red locking tab back to the locked position.

This high-performance coil pack is a popular upgrade among MINI owners looking to enhance their vehicle's performance over the stock coil. The installation requires removing the factory bolts from the old coil and modifying the MSD factory sleeves by drilling out 1/16" to fit the stock bolts.

Kits Include:

• MSD Coil Pack
• MSD Wire Set - Red
• Inductance: 7mH
• Maximum Voltage: 36,000 Volts
• Primary Resistance: 0.51 OHMs
• Secondary Resistance: 12K OHMs
• Turns Ratio: 77:1

Key Benefits:

• Upgraded performance over stock coil pack
• Enhances ignition efficiency and engine performance
• High voltage output of 36,000 volts for stronger sparks
• Low primary resistance of 0.51 OHMs for efficient energy transfer
• High secondary resistance of 12K OHMs for improved performance
• Durable construction for long-lasting use

Revitalize your Mini's performance with these spark plug wires and boots, designed to restore power and ensure smooth engine operation. Replace them at 60,000-mile intervals to maintain optimal performance. If you experience low spark or misfires and it's not due to the coil or spark plugs, faulty wires may be the culprit. Don't let rust buildup hinder performance—replace these wires to ensure happy motoring and reliable spark.

• Restores power and performance to your Mini
• Recommended replacement at 60,000-mile intervals
• Addresses issues such as low spark and misfires
• Prevents rust buildup for consistent spark delivery
• Includes plug wires for cylinder 1

Elevate your engine bay aesthetics with the stunning gloss carbon fiber engine cover designed for F Chassis BMWs. This Turner carbon fiber engine cover is a quick and transformative upgrade, replacing the plain factory plastic cover on B58 engines. In just minutes, your engine bay's appearance can be revitalized. The cover retains the factory emblem, ensuring a seamless transfer from your original engine cover to the new carbon fiber one. As one of the initial modifications for a new car, this carbon engine cover provides an instant enhancement without the need for extensive disassembly.

Crafted from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the Turner B58 Carbon Engine cover boasts a factory-form fitment derived from a mold of the original engine cover. The gloss clear coat not only enhances its aesthetic appeal but also provides UV protection and extra durability. Explore the range of other carbon fiber pieces from Turner to further enhance your B58.

• Gloss carbon fiber engine cover for F Chassis BMWs
• Quick and transformative upgrade for B58 engines
• Retains factory emblem for a seamless transfer
• Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
• Gloss clear coat for UV protection and durability
• Easy installation, enhancing engine bay appearance in minutes

Set of 6 Blue Performance Ignition Coils

Upgrade your engine's performance with the Turner BMW Ignition Coils designed for efficiency and power. Modified for increased energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is essential for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a strong and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

Enhance your S55 equipped BMW with the Turner Carbon Fiber Engine Cover, a stunning direct replacement for the factory plastic cover. This carbon fiber upgrade fits just like OE, offering a reversible design that can be effortlessly removed in seconds. Crafted entirely from authentic, hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, and finished in a beautiful gloss clear coat for UV-protection and extra durability. Elevate your engine bay's aesthetics with this sleek factory look that's sure to turn heads. Transform your engine bay today and enjoy the following features:

• Direct replacement for factory plastic engine cover
• Authentic hand-laid carbon fiber material
• Reversible and easily removable design
• Gloss clear coat for UV-protection and durability

Set of 6 Blue Performance Ignition Coils

Designed for performance and efficiency, Turner BMW ignition coils are modified to increase energy output, resulting in a faster, more efficient, and consistent burn. The blue housing adds both performance and aesthetic appeal to your engine. Ignition coils are crucial for your engine's health, performance, and efficiency, and Turner Ignition Coils are the ideal choice for maintaining a strong and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

Revamp your G Chassis S58 engine bay with the impressive Turner Carbon Engine Cover. Bid farewell to the plain factory plastic cover as this carbon fiber upgrade promises to swiftly transform your engine bay's appearance. As one of the initial and straightforward modifications for new car owners, simply remove the factory engine cover and transfer the factory "M" badge and grommets onto the new carbon fiber cover. With just minutes of installation, this Turner Carbon Engine Cover elevates the aesthetics of your S58 engine.

Crafted with precision, the Turner S58 Carbon Engine Cover begins with a mold of the original engine cover to ensure an optimal factory-form fitment. Constructed from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, the cover is finished with a beautiful gloss clear coat for UV protection and enhanced durability. Explore the range of other exceptional carbon fiber pieces offered by Turner to further enhance your G80 M3 or G82 M4.

• Carbon fiber engine cover for G Chassis S58 engines
• Swift and transformative upgrade for enhanced aesthetics
• Easy transfer of the factory "M" badge and grommets
• Meticulously crafted for optimal factory-form fitment
• Hand-laid carbon fiber material with pre-impregnated cloth and epoxy resin
• Gloss clear coat for UV protection and extra durability
• Quick installation for an instant engine bay makeover

Set of 6 Blue Performance Ignition Coils

Upgrade your engine's performance with Turner BMW Ignition Coils, designed with a focus on efficiency and power. Modified to increase energy output, these coils contribute to a faster, more efficient, and consistent burn, maximizing fuel utilization. The distinctive blue housing not only adds a signature aesthetic but also signifies enhanced performance. Routine replacement every 40,000 - 60,000 miles is crucial for maintaining engine health, performance, and efficiency. Choose Turner Ignition Coils for a robust and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish

Transform the appearance of your engine bay with the G Chassis S58 Carbon Engine and ECU Covers from Turner. These carbon fiber covers are a striking upgrade for the S58, replacing the plain factory plastic engine and ECU covers in just minutes. As one of the initial modifications for a new car, these covers offer an easy way to enhance the G80 M3 or G82 M4 without extensive dismantling.

The ECU cover is a direct replacement, while the engine cover allows for the transfer of the factory "M" badge and grommets. Crafted with meticulous attention, the Turner S58 Carbon Engine and ECU covers start with molds of the original components to ensure optimal factory-form fitment. Made from hand-laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, they boast a glossy clear coat for UV-protection and enhanced durability. Explore Turner's range of carbon fiber pieces to further elevate your G80 M3 or G82 M4.

Set of 6 Blue Performance Ignition Coils

Receive a complimentary set of 6 Blue Performance Ignition Coils with your purchase of the G Chassis S58 Carbon Engine and ECU Covers. Engineered for performance and efficiency, Turner BMW ignition coils are modified to increase energy output, resulting in a faster, more efficient, and consistent burn. The distinctive blue housing not only enhances performance but also adds a unique aesthetic to your engine. Ensure your engine's health, performance, and efficiency by choosing Turner Ignition Coils for a robust and healthy engine.

• Increased performance
• Direct fitment
• Signature Turner Blue finish