BMW Intake Parts

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

• Designed for N55 engines
• Optimizes airflow for increased power
• Improves throttle response and fuel efficiency
• Protects engine from contaminants

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

• Adds up to 10+ Horsepower
• Dramatic sound improvement
• Super fast install and removal
• Improves throttle response 
• Retains OEM airbox base as a heat shield
• Retains OEM cold air ducting
• Looks great under the hood
• Cleanable and reusable filter
• Made in the USA

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

• Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
• Supports increased airflow to enhance engine power and efficiency
• Integrated top-mount port injection bungs optimize fuel injector spray and delivery
• Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
• Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
• High-quality, high-temperature o-rings provide lasting durability and reliability
• Exclusively available through Turner Motorsport, ensuring trusted quality and service

In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B46 Engine (Forward facing, intake on the left) - (B48 Intake)**

This is a replacement filter for the popular 3.5" Burger Motorsports Performance Intakes. It comes pre-oiled with blue filter oil and a new clamp.

Includes:

Reusable BMS 3.5" inverted cone performance air filter (1123) Metal clamp

Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i 
2012+ F30 335i
2014+ F32 / F33 / F36 435i
 

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Introducing the newly developed 100% silicone, four-ply fiber reinforced intake hose by M7 Speed, designed for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly improved airflow, and an almost unlimited service life. Besides its outstanding performance, it adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.77” (45mm) ID at the turbo inlet.
• Easy DIY installation.

Enhance your Generation 2 MINI Cooper's cooling system with the M7 Speed Cold Side Lower Intercooler Elbow. Crafted from top-quality four-ply 100% silicone material, this OE replacement elbow offers superior durability and performance over the factory rubber part. Its mandrel tooling construction ensures a smoother and larger bend compared to the stock elbow. Engineered to withstand up to 58 PSI [4.0 BAR] of charge air pressure, it's an ideal fit for high-performance MINIs running increased boost. This kit includes one silicone elbow and two high-quality stainless steel clamps, offering a hassle-free installation process for DIY enthusiasts using basic hand tools.

• Direct bolt-on OE replacement with no modifications needed.
• OE-quality four-ply 100% silicone construction ensures enhanced durability.
• Resistant to age, environmental exposure, heat, and high boost pressure.
• Simple installation using basic hand tools.
• Kit includes two stainless steel-lined hose clamps.

Enhance your Mini's performance with this brand new replacement air filter element designed for the M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and the R56 AGS-R Ram Air System. Pre-oiled for convenience, it comes with a new clamp, making installation a breeze. Improve airflow and maintain optimal engine efficiency with this high-quality air filter element.

• Direct replacement for M7 R53 Cold Air Intake System, R55-R61 MAXX-FLO Intake, and R56 AGS-R Ram Air System
• Pre-oiled for immediate use
• Includes new clamp for hassle-free installation
• Enhances airflow for improved engine performance
• Maintains optimal engine efficiency

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed for MINIs with the N18 turbocharged engine. This direct OE replacement part provides superior durability, improved airflow, and an almost limitless service life. Plus, its sleek design adds an impressive under-hood WOW factor.

Key Features:

• Retains OE PCV connection location and size for seamless installation without modifications.
• No disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code).
• Complete kit with three stainless steel clamps and easy-to-follow installation instructions.
• Includes correct resistor pack to avoid CEL issues.
• Made from 100% silicone, resistant to oil and most chemicals.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber-reinforced construction for maximum strength and durability.
• 33% larger inside flow volume compared to the stock part.
• Smooth inner surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN).
• Sizes: 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

Upgrade your Mini's performance with the M7 Speed COLD SIDE Intercooler Elbow Kit paired with the HOT SIDE Charge pipe in striking BLACK color. This comprehensive intercooler pipe kit optimizes airflow, ensuring maximum flow and minimal pressure drop from the turbo to the throttle body. Crafted from premium four-ply fabric reinforced 100% silicone material, this kit not only boosts power and throttle response but also enhances the under-hood aesthetics of your vehicle. By replacing OE parts, it eliminates high boost failures and removes the OE hose side muffler and cold side sound chamber for improved throttle response and increased mid-range to top-end power. The kit includes six high-quality lined stainless steel clamps, providing a complete solution for installation using basic hand tools.

• Maximizes airflow for increased power
• Improves throttle response and mid-range to top-end power
• High-quality four-ply fabric reinforced 100% silicone material
• Enhanced under-hood appearance
• Eliminates OE hose side muffler and cold side sound chamber
• Complete kit for easy installation with basic hand tools