Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.
In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!
Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!
Features:
An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.
In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.
MADE IN THE USA
**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**
An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.
In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.
MADE IN THE USA
**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**
In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!
Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!
Features:
Upgrade your BMW's performance with the BMS N54 BOV Vacuum Adapter, a plug-and-play solution that enhances engine vacuum functionality. Easily attachable to the throttle body/brake booster vacuum line, this adapter provides two extra 1/8" NPT vacuum ports, offering versatile applications like replacing vacuum lines to diverter valves, connecting boost gauges, and more.
Enhance your BMW's performance and functionality with the BMS N54 BOV Vacuum Adapter – a versatile, plug-and-play solution made in the USA.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Introducing the newly developed 100% silicone, four-ply fiber reinforced intake hose by M7 Speed, designed for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly improved airflow, and an almost unlimited service life. Besides its outstanding performance, it adds an impressive under-hood aesthetic that MINIs truly need.
The M7 intake hose stands out by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.
The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed for MINIs with the N18 turbocharged engine. This direct OE replacement part provides superior durability, improved airflow, and an almost limitless service life. Plus, its sleek design adds an impressive under-hood WOW factor.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
M7 Speed proudly introduces its new 100% silicone four-ply fiber reinforced intake hose, designed specifically for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly better airflow, and an almost unlimited service life. It not only performs exceptionally well but also adds an impressive under-hood aesthetic that MINIs truly need.
The M7 intake hose stands out from other similar products by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This feature ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and straightforward installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.
The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Elevate your MINI's performance and style with the M7 Speed 100% silicone four-ply fiber reinforced intake hose. This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds the coveted under-hood WOW factor that MINIs need.
M7 Speed proudly introduces its newly developed intake hose designed for all MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose ensures a seamless integration into your MINI's engine bay while providing exceptional performance.
Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size. This means you can install it without any modifications, ensuring no disruption to the PCV electrical connection and eliminating the risk of initiating a DTC code (Check Engine Light). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions for hassle-free setup.
Crafted from 100% silicone materials resistant to oil and most chemical damage, this intake hose is designed for high-temperature continuous service up to 300°F (149°C). Its four-ply fiber reinforced construction ensures maximum strength and durability. With no modifications or cutting required for installation, this hose offers a 33% larger inside flow volume compared to the stock part, promoting better airflow to the turbocharger.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.
This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.
M7 Speed proudly introduces its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose provides exceptional durability, improved airflow, and a long service life.
Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without any modifications. This design eliminates any disruption to the PCV electrical connection, preventing the risk of triggering a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.
Note: This part is only compatible with MINIs equipped with the N18 R60 R61 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover. The kit also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
In BMW's with the B58 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!
**B58 Engine - BMW 140 240 340 440 - (B58 Intake)**
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.
This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.
M7 Speed announces the release of its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.
Easy DIY installation.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It also offers a matching set for your engine bay.
This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. Besides outstanding performance, it looks super cool and adds the under hood WOW factor that MINIs need.
M7 Speed proudly introduces its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose provides exceptional durability, improved airflow, and a long service life.
Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This design prevents disruption to the PCV electrical connection, eliminating the risk of a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.
Note: This part fits only MINIs with the N18 R60 R61 turbocharged engine and a single large PCV vent hose connecting the intake hose to the cam cover. The kit also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL issues.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Looking to upgrade your intercooler? This Phoenix Racing intercooler designed by Burger Motorsport is a great option that delivers better cooling, more power to the wheels, and allows you to hold that power longer during extended runs. A larger core and increased surface area dramatically improves cooling and reduces pressure drop. After extensive testing, this can allow your N54/55 powered BMW to gain around 10+peak wheel horsepower and during longer pulls and multiple runs, as much as 20-30whp over the factory intercooler.
Phoenix replacement intercoolers are a direct replacement for your factory intercooler and fully reversible. All required hardware is included.
Dimensions: 20" x 5.25" x 5.25"
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!
**B48/46 Engine (Transversally mounted BMW / MINI engine, intake on the right)**
If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe. This is perfect for someone looking to upgrade a stock or tuned N54!
Specs and Features:
O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.
If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe.
In addition, this pipe also includes a Tial BOV flange for easy installation of a Tial BOV without any modifications needed to the chargepipe. This is perfect for someone looking to upgrade a tuned or heavily modified N54!
Specs and Features:
O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Upgrade your MINI's performance with the M7 Speed 100% silicone four-ply fiber reinforced intake hose, a direct OE replacement part designed to enhance durability, airflow, and service life. Not only does it improve performance, but it also adds a sleek under-hood WOW factor that MINIs desperately need.
M7 Speed proudly introduces its newly developed intake hose for all MINIs equipped with the N14 turbocharged engine, available in four standard M7 colors (BLACK, RED, BLUE, and GREEN). Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, ensuring hassle-free installation without any modifications. This eliminates the risk of triggering a Check Engine Light (DTC code) by disrupting the PCV electrical connection. The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Introducing the M7 Speed MAXX-FLO(TM) Fresh Air System, the ultimate upgrade for Generation 2 MINIs! Upgrade your MINI's performance with our latest offering, designed to fit all R55 through R59 MINIs with N14 & N18 Turbocharged engines, as well as the R60 Countryman and R61 Paceman. Our system replaces the restrictive stock air box with a precision-fabricated aluminum frame, seamlessly connecting to factory mounting points for easy installation. Say goodbye to the problems found in other aftermarket systems and hello to improved airflow, engine performance, and great sound.
Tech Notes:
Emissions Notes:
Upgrade your MINI today with the M7 Speed MAXX-FLO (TM) Fresh Air System and experience enhanced performance and style!
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
Experience unrivaled performance with M7's latest innovation—the MAXX-FLO(TM) low restriction intake system. Engineered specifically for all 2007-2015 R55-R61 Turbocharged MINI Coopers, this system eliminates common issues found in other aftermarket fresh air systems. With a complete installation mount kit, silicone connector elbow, and all necessary hardware included, installation is a breeze. Plus, it attaches directly to existing factory mounts, ensuring a secure fit.
Upgrade your MINI's performance today with the M7 Speed MAXX-FLO(TM) High Performance Intake System!
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026
This kit includes the intake boot, hot side boot, and cold side elbow to complete your intake system in silicone. It also provides a matching set for your engine bay.
This direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor that MINIs need.
M7 Speed proudly introduces its 100% silicone, four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers unmatched durability, better airflow, and a long service life.
Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This design prevents disruption to the PCV electrical connection, eliminating the risk of a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.
Note: This part fits only MINIs equipped with the N18 turbocharged engine with one large PCV vent hose connecting the intake hose to the cam cover. It also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL issues.
This product was last offered at the strikethrough price on
08-31-2026
This product was last offered at the strikethrough price on
08-31-2026