BMW B58 3.0L Charge Pipe - Wrinkle Black addresses common issues with the factory plastic charge pipe, which is prone to blow-outs and can lead to engine limp mode and performance loss. This high-performance upgrade by Active Autowerke features a robust all-aluminum construction that enhances durability and prevents structural failure. The CNC-machined connection ensures a precise fit and reliable seal at the throttle body. With wrinkle black powder coating for a sleek, OEM appearance, this charge pipe improves throttle response and performance, making it a superior choice for your BMW.

• Replaces the factory plastic charge pipe with durable all-aluminum construction
• Prevents blow-outs and engine limp mode issues
• CNC-machined connection for a precise and reliable fit
• Consistent diameter tubing enhances performance
• Increases throttle response and reduces throttle lag
• Retains factory BMW o-ring seal for a secure fit
• Includes two raised bosses for Water/Methanol Injection (WMI) nozzles
• Wrinkle black powder-coated for a sleek, OEM look
• Comes with high-quality silicone couplers and stainless clamps for easy installation
• Ideal upgrade for B58TU-equipped BMW models to safeguard against charge pipe failure

Enhance your Generation 2 MINI Cooper's cooling system with the M7 Speed Cold Side Lower Intercooler Elbow. Crafted from top-quality four-ply 100% silicone material, this OE replacement elbow offers superior durability and performance over the factory rubber part. Its mandrel tooling construction ensures a smoother and larger bend compared to the stock elbow. Engineered to withstand up to 58 PSI [4.0 BAR] of charge air pressure, it's an ideal fit for high-performance MINIs running increased boost. This kit includes one silicone elbow and two high-quality stainless steel clamps, offering a hassle-free installation process for DIY enthusiasts using basic hand tools.

• Direct bolt-on OE replacement with no modifications needed.
• OE-quality four-ply 100% silicone construction ensures enhanced durability.
• Resistant to age, environmental exposure, heat, and high boost pressure.
• Simple installation using basic hand tools.
• Kit includes two stainless steel-lined hose clamps.

This kit from Active Autowerke replaces the weak plastic charge pipe with a new aluminum part, secured with a high-quality silicone couple. When you're building a high-powered turbocharged engine, or even just looking for peace of mind on a stock application, durability modifications are just as important - if not more important - than adding power. If your charge pipe fails, it results in a huge vacuum leak that sends your ECU into limp mode, diminishing performance significantly. Don't wait - upgrade your charge pipe today!

This product fits the following BMWs:
2016+ F87 M2
2014+ F22 M235i 
2012+ F30 335i
2014+ F32 / F33 / F36 435i
 

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

M7 Speed proudly introduces its new 100% silicone four-ply fiber reinforced intake hose, designed specifically for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly better airflow, and an almost unlimited service life. It not only performs exceptionally well but also adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out from other similar products by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This feature ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and straightforward installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is an essential upgrade for Mini enthusiasts looking to enhance the performance of their MINI N18 1.6L engine. This high-quality charge pipe, in sleek black finish, is designed to increase airflow and reduce turbo lag for improved throttle response and power delivery.

Crafted with precision engineering and durable materials, the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black ensures a perfect fit and reliable performance. It effectively increases the efficiency of the intercooler system, allowing for cooler and denser intake air for better engine performance.

• Enhances performance of MINI N18 1.6L engine
• Increases airflow and reduces turbo lag
• Improves throttle response and power delivery
• Sleek black finish adds aesthetic appeal
• Crafted with precision engineering and durable materials
• Ensures perfect fit and reliable performance

Investing in the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is a smart choice for Mini owners looking to unlock the full potential of their vehicle's engine.

Enhance Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.

This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

M7 Speed Silicone Intake Hose

M7 Speed proudly introduces its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose provides exceptional durability, improved airflow, and a long service life.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without any modifications. This design eliminates any disruption to the PCV electrical connection, preventing the risk of triggering a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.

Note: This part is only compatible with MINIs equipped with the N18 R60 R61 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover. The kit also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

M7 MINI Cooper S Cold Air Intake

Upgrade your MINI Cooper S with the M7 Cold Air Intake, a high-performance solution designed for enhanced engine efficiency and power. This innovative intake system features a fully enclosed custom metal housing that seals a dual-stage high-flow foam filter, offering superior filtration and heat resistance. With a focus on delivering optimal airflow, the M7 Cold Air Intake significantly improves your MINI's performance. Its pressurized, cold air supply from the cowl area beneath the windshield enhances power without the need for any factory parts modifications. Installation is quick and hassle-free, allowing you to enjoy the ride in no time.

Key Features:

• Fully enclosed custom metal housing
• Dual-stage high-flow foam filter
• Over-sized filter for ample filtering capacity
• Velocity stack for improved air flow
• Pressurized cold air supply from the cowl area
• Simple, non-destructive installation
• Matte black powder-coated intake box
• Includes pre-oiled filter and installation hardware
• Proudly made in the USA
• Now 50 State Legal in the USA

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete your MINI's intake system with silicone components. It offers a matching set for your engine bay.

M7 Speed proudly announces the release of its newly developed 100% silicone, four-ply fiber reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. This direct OE replacement part provides superior durability, enhanced airflow, and virtually unlimited service life. Beyond its outstanding performance, it also adds a striking under-hood appearance that MINIs desperately need.

Unlike other similar hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit comes complete with three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N14 turbocharged engine that have one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

Upgrade Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.

This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

M7 Speed Silicone Intake Hose

M7 Speed announces the release of its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

Unique Benefits:

• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.

Specifications:

• Inner Diameter at MAF Sensor: 2.75” [70mm]
• Inner Diameter at Turbo Inlet: 1.97” [50mm]

Easy DIY installation.

Additional Features:

• Made from 100% silicone materials resistant to oil and most chemical damage.
• Designed for high temperature (300°F

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to fully upgrade your intake system with matching silicone parts for your engine bay.

Introducing M7 Speed’s newly developed 100% silicone, four-ply fiber-reinforced intake hose for MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. It not only boosts performance but also adds a striking under-hood WOW factor that MINIs crave.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This means no disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code). The kit includes three stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, which has one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals
• Designed for continuous service at high temperatures (300°F [149°C])
• Four-ply fiber-reinforced construction for maximum strength and durability
• Retains stock PCV connection location and size for easy installation
• No modifications or cutting required for installation
• 33% larger inside flow volume compared to the stock part
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger
• Available in four standard M7 colors
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet
• Easy DIY installation

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as other popular M7 silicone hose products, this OE replacement elbow offers enhanced durability and performance.

Key Features:

• Direct factory OE replacement with no modifications required
• Smooth and larger bend compared to the convoluted molded rubber OE part
• Resistant to age, oil reaction, high boost applications, and environmental damage
• Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure
• Includes one silicone elbow and two high-quality lined stainless steel clamps
• Easy installation with basic hand tools
• Currently available only in BLACK

Upgrade your MINI's performance with the M7 Speed Cold Side Lower Intercooler Elbow, designed to replace the OE rubber elbow prone to failure over time. With its durable silicone construction and easy installation, this elbow is perfect for high-performance MINIs running increased boost.