M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

Introducing the newly developed 100% silicone, four-ply fiber reinforced intake hose by M7 Speed, designed for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly improved airflow, and an almost unlimited service life. Besides its outstanding performance, it adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.77” (45mm) ID at the turbo inlet.
• Easy DIY installation.

Enhance your Generation 2 MINI Cooper's cooling system with the M7 Speed Cold Side Lower Intercooler Elbow. Crafted from top-quality four-ply 100% silicone material, this OE replacement elbow offers superior durability and performance over the factory rubber part. Its mandrel tooling construction ensures a smoother and larger bend compared to the stock elbow. Engineered to withstand up to 58 PSI [4.0 BAR] of charge air pressure, it's an ideal fit for high-performance MINIs running increased boost. This kit includes one silicone elbow and two high-quality stainless steel clamps, offering a hassle-free installation process for DIY enthusiasts using basic hand tools.

• Direct bolt-on OE replacement with no modifications needed.
• OE-quality four-ply 100% silicone construction ensures enhanced durability.
• Resistant to age, environmental exposure, heat, and high boost pressure.
• Simple installation using basic hand tools.
• Kit includes two stainless steel-lined hose clamps.

M7 Speed Silicone Intake Hose for MINIs with N18 Turbocharged Engine

M7 Speed proudly introduces its new 100% silicone four-ply fiber reinforced intake hose, designed specifically for all MINIs equipped with the N18 turbocharged engine. This direct OE replacement part offers superior durability, significantly better airflow, and an almost unlimited service life. It not only performs exceptionally well but also adds an impressive under-hood aesthetic that MINIs truly need.

The M7 intake hose stands out from other similar products by retaining the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without any modifications. This feature ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a DTC code (Check Engine Light). The kit includes three appropriately sized stainless steel clamps and straightforward installation instructions. Please note that this part is only compatible with MINIs equipped with the N18 turbocharged engine that have a single large PCV vent hose connecting from the intake hose to the cam cover.

The hose also includes the correct resistor pack for the additional line connecting into the OEM hose, ensuring no CEL (Check Engine Light) issues.

Key Features:

• Constructed from 100% silicone materials, resistant to oil and most chemicals.
• Designed for high-temperature service up to 300°F (149°C).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Maintains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• Provides 33% larger internal flow volume compared to the stock part.
• Features a super smooth inner flow surface and transitions, promoting better airflow to the turbocharger.
• Available in four standard M7 colors: BLACK, RED, BLUE, and GREEN.
• Dimensions: 2.75” (70mm) ID at the MAF sensor and 1.97” (50mm) ID at the turbo inlet.
• Easy DIY installation.

Enhance Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.

This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

M7 Speed Silicone Intake Hose

M7 Speed proudly introduces its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose provides exceptional durability, improved airflow, and a long service life.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without any modifications. This design eliminates any disruption to the PCV electrical connection, preventing the risk of triggering a DTC code (Check Engine Light). Each kit includes three stainless steel clamps and easy-to-follow installation instructions.

Note: This part is only compatible with MINIs equipped with the N18 R60 R61 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover. The kit also includes a sensor kit for the heater sensor on later N18 models, ensuring no CEL.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions for better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor, 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

MINI R52 R53 Silicone Intercooler Boots - Red are designed to enhance the performance and reliability of your MINI's intercooler system. These high-quality silicone boots are ideal for use with most aftermarket intercoolers and older versions of the DFIC. Their extended length ensures a superior seal between the intercooler core and the inlet/outlet horns, providing more surface area for a secure clamp fit.

The MINI R52 R53 Silicone Intercooler Boots offer several advantages:

• Enhanced Sealing: Longer boots provide a better seal, reducing the risk of leaks.
• Improved Fit: Tighter fit around both the intercooler and OEM intercooler horns prevents slipping.
• Increased Durability: Made from high-quality silicone for long-lasting performance.
• Easy Installation: Designed for straightforward installation with no special tools required.
• Color Options: Available in red, black, or blue to match your vehicle’s style.
• Proudly Made in the USA: Ensures high manufacturing standards and quality control.

M7 MINI Cooper S Cold Air Intake

Upgrade your MINI Cooper S with the M7 Cold Air Intake, a high-performance solution designed for enhanced engine efficiency and power. This innovative intake system features a fully enclosed custom metal housing that seals a dual-stage high-flow foam filter, offering superior filtration and heat resistance. With a focus on delivering optimal airflow, the M7 Cold Air Intake significantly improves your MINI's performance. Its pressurized, cold air supply from the cowl area beneath the windshield enhances power without the need for any factory parts modifications. Installation is quick and hassle-free, allowing you to enjoy the ride in no time.

Key Features:

• Fully enclosed custom metal housing
• Dual-stage high-flow foam filter
• Over-sized filter for ample filtering capacity
• Velocity stack for improved air flow
• Pressurized cold air supply from the cowl area
• Simple, non-destructive installation
• Matte black powder-coated intake box
• Includes pre-oiled filter and installation hardware
• Proudly made in the USA
• Now 50 State Legal in the USA

Upgrade your BMW with the Turner Motorsport E9X M3 (S65) Valved Axle-back Exhaust, offering a blend of robust exhaust notes and enhanced performance. This system delivers a menacing growl when the valves are open, providing an aggressive driving experience. Plus, it's emissions legal, retaining all four factory cats, making it ideal for various preferences and regulations.

The exhaust features Mandrel bent dual 2.5” 304SS pipes with a brushed finish, high-flow valved stainless steel mufflers, and easy-fit Accuseal slip-fit joints. The kit includes an axle-back exhaust with X pipe, adapter pipes for factory mid pipes, muffler valve controller kit, and engraved exhaust tips. Enjoy the Turner Motorsport E9X M3 full exhaust system, balancing volume for both your neighbors and your desire for an impactful exhaust.

Key Features:

• Mandrel bent dual 2.5” 304SS pipes with brushed finish
• High-flow, valved, stainless steel mufflers
• Accuseal slip-fit joints for easy fitment
• Retains factory emissions
• Kit includes axle-back exhaust, adapter pipes, muffler valve controller kit, and engraved exhaust tips

Carbon Fiber S65 Intake:

Elevate your S65 engine with the Carbon Fiber S65 Intake from Turner. This gloss carbon fiber intake not only adds a roaring induction noise but also outperforms the factory intake by over 35%. Revel in the improved audible experience, the beauty of carbon fiber in your engine bay, and enhanced engine performance.

The Turner S65 Carbon Intake is designed with a larger cross-sectional area, ensuring more airflow to the engine in high-demand scenarios. The full carbon intake tube connects to a carbon heat shield housing a large cone filter. Tested to outperform the factory intake with over 750CFM, this intake offers benefits like increased throttle response and a unique, stand-out design.

Benefits:

• Unique design for a standout appearance
• Full carbon fiber heat shield
• Improved airflow and engine breathing
• Increased throttle response
• Added induction noise for an exhilarating driving experience

Part Design:

• Designed and engineered in-house using 3D laser scanning and CAD technology
• Hood Inlet Scoop for directing cool air
• Full Carbon Fiber Heat Shield Assembly
• Monstrous 9" cone air filter
• 7"x5" Carbon Fiber Inlet Tube
• Fully compatible with OEM Secondary Air Injection emissions system

Kit Contents:

• Carbon Fiber Heat Shield
• Carbon Fiber Intake Tube
• Plenum Silicone Coupler
• 9" Cone Air Filter
• Installation Hardware

Product Development:

The Turner S65 Intake System undergoes rigorous development, including FARO laser scanning, 3D CAD modeling, in-house prototyping, and extensive testing on a Mustang AWD 500 SE dyno and Superflow SF-750 Flowbench.

Elevate your BMW experience with the Turner Motorsport E90 E92 M3 Titanium Valved Axle-Back Exhaust. This cutting-edge system offers exotic exhaust notes, weight reduction, and a noticeable performance boost. The muffler valves provide a tame, factory-like sound with a hint of exotic character when closed, and transform your car into an exotic beast when opened, thanks to the supplied valve controller.

For those who prefer to keep their factory cats, this exhaust setup is the ideal choice. It leaves all 4 factory cats in place, ensuring 100% emissions legality. The Mandrel bent dual 2.5” Ti22 pipes and high-flow, valved Titanium mufflers provide efficient gas flow and a dual-purpose exhaust system that satisfies both neighbors and performance enthusiasts.

Kit Includes:

• Turner Axle back Exhaust with X pipe
• Turner Adapter pipes for Factory Mid Pipes
• Turner Muffler Valve Controller Kit
• Turner Engraved Exhaust Tips

Features:

• Mandrel bent dual 2.5” Ti22 pipe
• Turner Engraved Brushed exhaust tips
• High flow, valved, Titanium mufflers
• Accuseal slip-fit joints for easy fitment
• Utilizes factory exhaust hangers

Upgrade your M3 with the Turner Motorsport E90 E92 M3 Titanium Valved Axle-Back Exhaust for a perfect blend of style and performance.

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit to fully upgrade your intake system with matching silicone parts for your engine bay.

Introducing M7 Speed’s newly developed 100% silicone, four-ply fiber-reinforced intake hose for MINIs equipped with the N14 turbocharged engine. Available in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, improved airflow, and virtually unlimited service life. It not only boosts performance but also adds a striking under-hood WOW factor that MINIs crave.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for seamless installation without modifications. This means no disruption to the PCV electrical connection, preventing any risk of triggering a Check Engine Light (DTC code). The kit includes three stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, which has one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals
• Designed for continuous service at high temperatures (300°F [149°C])
• Four-ply fiber-reinforced construction for maximum strength and durability
• Retains stock PCV connection location and size for easy installation
• No modifications or cutting required for installation
• 33% larger inside flow volume compared to the stock part
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger
• Available in four standard M7 colors
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet
• Easy DIY installation

Upgrade your Mini's intake system with the M7 Speed Silicone Intake Hose Kit, including the intake boot, hot side boot, and cold side elbow kit. Crafted from 100% silicone materials resistant to oil and chemicals, this kit offers superior durability, improved airflow, and virtually unlimited service life. Benefits include:

• Direct OE replacement part for easy installation.
• Superior durability and airflow compared to stock parts.
• Retains stock PCV connection location and size.
• No modifications or cutting required for installation.
• 33% larger inside flow volume for enhanced performance.
• Available in four standard M7 colors for customization.
• Easy DIY installation with included stainless steel clamps and instructions.

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as other popular M7 silicone hose products, this OE replacement elbow offers enhanced durability and performance.

Key Features:

• Direct factory OE replacement with no modifications required
• Smooth and larger bend compared to the convoluted molded rubber OE part
• Resistant to age, oil reaction, high boost applications, and environmental damage
• Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure
• Includes one silicone elbow and two high-quality lined stainless steel clamps
• Easy installation with basic hand tools
• Currently available only in BLACK

Upgrade your MINI's performance with the M7 Speed Cold Side Lower Intercooler Elbow, designed to replace the OE rubber elbow prone to failure over time. With its durable silicone construction and easy installation, this elbow is perfect for high-performance MINIs running increased boost.

Upgrade Your MINI's Intake System!

This kit includes the intake boot, hot side boot, and cold side elbow kit to complete the intake system in silicone. It's also a perfect matching set for your engine bay.

This is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

M7 Speed Silicone Intake Hose

M7 Speed announces the release of its newly developed 100% silicone four-ply fiber reinforced intake hose for all MINIs equipped with the N18 turbocharged engine. Offered in the four standard M7 colors (BLACK, RED, BLUE, and GREEN), this is a direct OE replacement part offering superior durability, much better airflow, and virtually unlimited service life. In addition to outstanding performance, it looks super cool and adds the under hood WOW factor MINIs so desperately need.

Unique Benefits:

• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.

Specifications:

• Inner Diameter at MAF Sensor: 2.75” [70mm]
• Inner Diameter at Turbo Inlet: 1.97” [50mm]

Easy DIY installation.

Additional Features:

• Made from 100% silicone materials resistant to oil and most chemical damage.
• Designed for high temperature (300°F

Unleash the roar of your N52 engine with the Turner Motorsport E9x N52 Muffler & Resonator Delete Kit. Elevate your driving experience by transforming your exhaust with this cost-effective kit, providing performance gains, a captivating exhaust note, and stunning exhaust tips. Shedding the heavy factory muffler, Turner's T304 stainless steel 3.0" tubing replaces it, delivering a lighter, high-flow solution compatible with the OEM rear valance. Easy to install with hand tools, this muffler delete adds a powerful sound without significant drone, while shaving off about 20lbs from your vehicle. Upgrade your N52 without replacing the entire exhaust system!

Key Features:

• Turner designed Muffler & Resonator Delete for N52 engine
• T304 stainless steel construction with 1.25mm wall thickness
• CNC mandrel-bent 3.0" tubing for optimal exhaust gas routing
• Tig-welded exhaust hangers for direct fitment
• Hand-Tig welded joints for durability
• Stainless steel Accuseal exhaust clamps for a leak-proof seal
• Large radius bends ensure smooth transitions for optimal flow

Kit Includes:

• Y-pipe section
• Tailpipe section
• Dual 3.0" exhaust tips (Black Chrome finish)
• Stainless steel Accuseal exhaust clamps

See and hear the difference on the ECS YouTube page.

Add power and sound to your E36 with a performance exhaust system and free-flowing intake!

Performance Axle-Back Exhaust - E36 M3:

Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.

Our new E36 cat-back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.

To accomplish these goals our engineers revved up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.

We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.

Non-M Fitment:
Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Why the upgrade?

By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:

- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.

- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.

- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.

Features and Benefits:

Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Durable 304 Stainless Steel
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section
Installation:

- Click HERE for Installation Instructions -

Product Development:

Our Turner E36 Exhaust was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

Performance Carbon Intake Systems - E36 6 Cyl Models:

In 2023 our team at Turner can proudly say we are still fixated on the E36 chassis, our group of engineers and technicians own a multitude of E36 chassis including an early model vert, 95 M3 and Z3m(still counts!). To pay tribute to this chassis we spent a great deal of time to ensure we crafted THE best intake possible for the beloved chassis. We made separate kits tailored to each of the 6 cylinder variations with options for OBD1, OBD2 and vehicles equipped with automatic stability control.

Built from the throttle body forwards, our ground-up designed e36 intake offers a closed lid design that, when paired with our powder coated heat shield, keeps your intake temps cool, all while packaging neatly into the engine bay, ensuring your intake is working as efficiently as possible while looking as good as ever. Our versatile intake includes all the provisions from the intake to the throttle body inlet, making every adjustment along the way to fit with whichever 6-cylinder USDM E36 you have, fitting all ASC and non-ASC, M and Non-M, and OBD1 and OBD2 variants.

Carbon, OEM+ styling with added air induction and lower intake air temperatures. To go the extra mile this kit includes new upgraded silicone throttle body and maf inlet tubes. With the new silicone tubing you can replace your worn or damaged rubber boots to ensure your car is running the best it can be. If the features alone don't sell you take a look at the photos to see just how good your engine bay could look. All of this along with install instructions makes the Turner E36 intake the clear choice for your vehicle. With this many features, there is no competition on the market that can compare.

Features and benefits:

Increased air flow
Added air induction volume
Upgraded silicone throttle body MAF inlets
Enhanced engine bay aesthetic
Retains factory cold air inlet
Factory cruise control mounting
Individualized designs for all 6 cylinder variations
Design:

Heatshield Utilizes lightweight 5052 Aluminum construction finished in wrinkle black powder coat, mounting directly to the stock airbox locations
Clever design integrates stock intake snorkel, ensuring intake is receiving optimal flow and the coldest air
Utilizes stock mounting locations on frame rail and wheel arch
Cruise control motor mounts directly to Turner Heatshield, allowing for enclosed design while retaining near-stock location
Two silicone intake boot designs allow for the ability to retain or delete the ASC+T valve based on user preference
3.75” Conical Turner Motorsport Air Filter maximizes airflow given the space restrictions and allows the engine to breath freer
Retains Stock MAF Sensor
High-gloss carbon intake cover
Air box mounting for IAT sensor
Kit Contents:

Aluminum airbox - powder coat black
Carbon fiber intake cover
Reinforced silicone throttle body inlet
Reinforced silicone MAF coupler
Aluminum intake inlet - powder coat black
Charcoal canister spacer (obd1 specific)
Turner high flow oiled cone filter
Installation hardware
Product Devlopment:

Our Turner E36 Intake Systems are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing. Performance data metrics are collected utilizing Mustang AWD 500 SE in ground dyno and in-house Superflow SF-750 Flowbench.

Installation:

- Click HERE for Installation Instructions -

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI's performance with the M7 Speed 100% silicone four-ply fiber reinforced intake hose, a direct OE replacement part designed to enhance durability, airflow, and service life. Not only does it improve performance, but it also adds a sleek under-hood WOW factor that MINIs desperately need.

M7 Speed proudly introduces its newly developed intake hose for all MINIs equipped with the N14 turbocharged engine, available in four standard M7 colors (BLACK, RED, BLUE, and GREEN). Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, ensuring hassle-free installation without any modifications. This eliminates the risk of triggering a Check Engine Light (DTC code) by disrupting the PCV electrical connection. The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part only fits MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

Enhance your BMW's performance and sound with the Turner Motorsport N54 Valved Catback Exhaust. This exhaust system delivers a dual-purpose experience, offering a subdued note with the muffler valves closed, maintaining a near-factory sound. Open the valves with the included controller, and unleash a menacing growl, transforming your driving experience. Crafted with mandrel-bent dual 2.5" 304SS pipes and a high-flow valved stainless steel muffler, this system is a bolt-on replacement for the OE version, ensuring easy fitment with Accuseal slip-fit joints. Elevate your 335i's exhaust with the Turner Motorsport E9X 335i full exhaust system, available as Axle Back, Cat-back, or Turbo back.

Key Features:

• Dual 2.5" 304SS pipes with brushed finish
• Valved stainless steel muffler for dual-sound experience
• Accuseal slip-fit joints for easy fitment
• Turner Engraved Polished exhaust tips
• Utilizes factory exhaust hangers for straightforward installation

Kit Includes:

• Turner Mid Pipes for factory catted mid pipes
• Turner Valved Exhaust
• Muffler Valve Controller Kit
• Turner Engraved Exhaust Tips
• Gaskets and Nuts

M7 Speed Silicone Intake Hose for MINIs with N14 Turbocharged Engine

Upgrade your MINI with the M7 Speed 100% silicone four-ply fiber-reinforced intake hose, designed as a direct OE replacement part for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this hose offers superior durability, improved airflow, and virtually unlimited service life. Not only does it enhance performance, but it also adds a striking under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing for hassle-free installation without any modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit includes three properly sized stainless steel clamps and easy-to-follow installation instructions. Please note that this part fits only MINIs equipped with the N14 turbocharged engine, with one large PCV vent hose connected from the intake hose to the cam cover.

Key Features:

• Made from 100% silicone, resistant to oil and most chemical damage.
• Designed for high temperature (300°F [149°C]) continuous service.
• Four-ply fiber reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for ease of installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [46mm] ID at the turbo inlet.
• Easy DIY installation.

Complete Silicone Intake System Kit

This kit includes the intake boot, hot side boot, and cold side elbow kit, offering a complete silicone solution for your intake system. Get a matching set for your engine bay that not only enhances performance but also looks fantastic.

M7 Speed is proud to release its 100% silicone, four-ply fiber-reinforced intake hose for all MINIs equipped with the N14 turbocharged engine. Available in four standard M7 colors (BLACK, RED, BLUE, and GREEN), this direct OE replacement part offers superior durability, enhanced airflow, and virtually unlimited service life. It not only boosts performance but also adds a stunning under-hood WOW factor that MINIs desperately need.

Unlike other hoses on the market, the M7 hose retains the OE PCV (positive crankcase ventilation) connection location and size, allowing the OE hose and connector to be installed without modifications. This ensures no disruption to the PCV electrical connection, eliminating the risk of triggering a Check Engine Light (DTC code). The kit comes with three stainless steel clamps and easy-to-follow installation instructions. Note that this part fits only MINIs equipped with the N14 turbocharged engine with one large PCV vent hose connected from the intake hose to the cam cover.

Features:

• Made from 100% silicone, resistant to oil and most chemicals.
• Designed for continuous service at high temperatures (300°F [149°C]).
• Four-ply fiber-reinforced construction for maximum strength and durability.
• Retains stock PCV connection location and size for easy installation.
• No modifications or cutting required for installation.
• 33% larger inside flow volume compared to the stock part.
• Super smooth inner flow surface and transitions promoting better airflow to the turbocharger.
• Available in four standard M7 colors.
• 2.75” [70mm] ID at the MAF sensor and 1.97” [50mm] ID at the turbo inlet.
• Easy DIY installation.

Upgrade your MINI's performance with the MINI R Chassis N14 N18 High Flow Pre-Intercooler Charge Pipe in Green. Engineered for optimal airflow and durability, this charge pipe is a must-have for MINI enthusiasts looking to enhance their driving experience.

• Increases airflow for improved performance
• Durable construction ensures long-lasting reliability
• Easy installation with basic hand tools
• Vibrant green color adds a stylish touch to your engine bay

MINI R55+ Cold Side Intercooler Elbow Kit | Gen 2 Turbocharged MINI Cooper - Black

MINI R55+ Cold Side Intercooler Elbow Kit | Gen 2 Turbocharged MINI Cooper - Black is a premium upgrade for Mini owners seeking improved performance and style. Specifically designed for MINI R55 and newer models with Gen 2 Turbocharged engines, this cold side intercooler elbow kit enhances airflow and reduces turbulence for better engine efficiency. With its sleek black finish and durable construction, it not only adds a stylish touch to your Mini's engine bay but also ensures long-lasting performance.

• Specifically designed for MINI R55 and newer models with Gen 2 Turbocharged engines
• Enhances airflow and reduces turbulence for improved engine efficiency
• Sleek black finish adds a stylish touch to your Mini's engine bay
• Durable construction ensures long-lasting performance
• Easy installation for convenience

Upgrade your Mini's performance and style with the MINI R55+ Cold Side Intercooler Elbow Kit and experience the difference on the road.

Upgrade Your MINI with the MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side

The MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side is an essential component for optimal performance. Crafted with precision and quality materials, this lower intercooler elbow ensures efficient airflow and durability for your MINI.

Key Benefits:

• Enhances airflow for improved engine performance
• Constructed with quality materials for durability
• Precision-engineered for a perfect fit
• Easy installation with no modifications required

Upgrade your MINI's performance with the MINI R Chassis N14 N18 Lower Intercooler Elbow Green - Cold Side. This essential component enhances airflow, improving engine performance and ensuring durability. With its precision engineering and quality materials, installation is a breeze, requiring no modifications to your MINI.

Upgrade Your MINI with the Ultimate MAXX-FLO(TM) Fresh Air System!

Introducing the M7 Speed MAXX-FLO(TM) Fresh Air System, the ultimate upgrade for Generation 2 MINIs! Upgrade your MINI's performance with our latest offering, designed to fit all R55 through R59 MINIs with N14 & N18 Turbocharged engines, as well as the R60 Countryman and R61 Paceman. Our system replaces the restrictive stock air box with a precision-fabricated aluminum frame, seamlessly connecting to factory mounting points for easy installation. Say goodbye to the problems found in other aftermarket systems and hello to improved airflow, engine performance, and great sound.

• Sturdy Construction: Heavy gauge aluminum & TIG welded construction.
• Durable Finish: Matte black super durable powder coat finish with a laser cut stainless steel M7 medallion.
• High Flow Filter: 12" long x 5 " diameter dual stage super high flow/low restriction washable foam filter.
• Optional Filter: 8" long x 6" dia pleated washable filter available.
• Color Choices: 100% silicone connection elbow available in BLACK, BLUE, RED.
• MAF Sensor Location: MAF sensor stays in the stock location, no modifications necessary.
• Secure Mounting: Air filter element securely mounts to a sturdy metal adapter tube.
• Optional Accessories: Optional M7 R56 Vortex 2 Scoop and Turbo Heat Shield available (sold separately).
• Ease of Installation: Easy to install.
• Made in the USA: 100% Made in The USA.

Tech Notes:

• Optional MAF Spacer/Adapter required for vehicles without a MAF Sensor.
• Removal of factory blocking plate recommended when using a stock scoop.

Emissions Notes:

• This product has passed C.A.R.B. approval.
• Not legal for street use in California and other states that have adopted California Emissions Standards under Section 177 of the Federal Clean Air Act of 1970.
• Intake systems are subject to governmental regulation in certain states. For legal use, CARB Executive Order (EO) number is required.

Upgrade your MINI today with the M7 Speed MAXX-FLO (TM) Fresh Air System and experience enhanced performance and style! Access Secret Premium Dashboard