BMW Springs

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1.0" (25mm)
  
• R: -1.0" (25mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2016+ F30 BMW 340i - Sedan

Front Lowering: .2" to .8"
Rear Lowering: .2" to .8"

KW height adjustable spring kits are a great alternative to conventional lowering springs. You no longer have to be satisfied with a fixed lowering height. KW HAS systems allow you to adjust the vehicle ride height with the KW height adjuster even after the kit has been installed. Your vehicle does not only get a more dynamic look with the KW height adjustable spring kit, but also the steering behavior and response of the standard dampers become more agile. All driver assistance systems and comfort features of a factory adaptive or electronic suspension remain operational and work harmoniously with KW'svehicle-specific spring set up.

KW uses high-quality springs made of chrome-silicon steel with spring rates designed specifically for each respective OE suspension damper and wheel load. KW's expertise and engineering ensure the spring rates will pair perfectly with the different damper characteristics of your factory adaptive electronic suspension. Along with the use of high-quality materials and the included KW ride height adjustment mechanisms, KW height adjustable spring kits always includes the vehicle-specific bump stops with dust protection system to protect your factory suspension against wear & tear caused by road grime and debris.

Every KW kit undergoes extensive stress testing before production and is developed and manufactured exclusively in KW's company headquarters in Fichtenberg, a small in town in Germany, to meet the high standards of KW quality management. For KW as a German manufacturer, it goes without saying that KW coilover kits will exceed the original equipment manufacturer quality, and offer useful and innovative solutions. With an application list comprising more than 4,600 options, KW guarantees an outstanding selection backed by their Limited Lifetime Warranty.

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -3/4" (19mm)
  
• R: -1.0" (25mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2012+ F32 BMW 435i X-Drive 440i X-Drive - Coupe

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -5/8" (16mm)
  
• R: -1/4" (6mm)

Fitment note: Dinan only recommends these springs be used with their custom-valved Koni shocks. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge.

This item fits the following BMWs:
2001-2006 E46 BMW M3 Coupe

BMW E92 M3 Performance Spring Set is engineered to elevate your driving experience by using increased spring rates that reduce body roll and enhance handling dynamics. This performance spring set lowers your vehicle's center of gravity slightly, providing a balanced stance without sacrificing daily driving comfort.

• Reduced Body Roll: Experience improved stability and control during cornering.
• Enhanced Braking Performance: Minimized dive under braking for more precise stops.
• Improved Grip: Better tire contact with the road for increased traction.
• Slight Lowering: Lowers the vehicle by approximately 1/2 inch for a sportier appearance.
• Durability: Springs are preset to prevent sag and are shot-peened for stress relief.
• Dinan Badge Points: Earn 2 points toward your exclusive Dinan badge.

For over 35 years, Dinan has led the way in BMW tuning, focusing on balanced performance that maintains the original driving feel of your BMW. Each part is meticulously developed, tested, and backed by a four-year, 50,000-mile warranty. As you enhance your BMW with Dinan's high-quality components, you move closer to earning the prestigious Dinan badge, a symbol of superior BMW performance.

Front Lowering: -1.2"
Rear Lowering -1.0"

Enhance the look of your BMW G14 M850i xDrive with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.

This item fits the following BMWs:
2019+ G14 BMW M850i xDrive w/ Adaptive Suspension

Z4 sDrive M40i:
Front Lowering: -1.0"
Rear Lowering -.8"

Z4 sDrive30i:
Front Lowering: -1.3"
Rear Lowering -1.0"

Enhance the look of your BMW G14 M850i xDrive with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle's suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.

This item fits the following BMWs:
2019+ G29 BMW Z4 sDrive 30i M40i