Find Parts That Fit Your Vehicle

BMW Springs

Springs are the easiest and most cost effective way to improve your handling, get a more aggressive rake, and give your vehicle a more attractive stance. We do recommend replacing your shocks and struts at the same time with either Bilstein or Koni dampers.

Sub-Categories

Sort By:

Emmanuele Design - Corporate Logo
T#:555227
Part#: EMD-F80-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension. Lowering of 1.3" front and .3" rear.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:568357
Part#: EMD-F82-LS
In Stock
$ 349.00 USD
Free Shipping
$ 349.00 USD
Free Shipping
Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension.
Show More Show Less
Emmanuele Design - Corporate Logo
T#:23218024
Part#: EMD-F87-LS
In Stock
$ 349.00 USD
Free Shipping on orders $49 and up
Provides lowering of 1.3" in the front and 0.9" in the rear. Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature.
Show More Show Less

Febi Rear Spring - E83 X3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:591430
Part#: 33533413080
Ships on Dec 1, 2026
$ 55.99 USD
Free Shipping on orders $49 and up
This is the standard ride height factory rear spring. They are sold individually. The factory springs have a tendency to break over time. These springs will restore your ride back to the stock ride height.
Show More Show Less

Emmanuele Design - Corporate Logo
T#:35154916
Part#: EMD-G80-LS
Ships in 1 Business Day
$ 349.00 USD
Free Shipping on orders $49 and up

After much anticipation, we are pleased to release our lowering spring kit for the BMW M3 G80 platform! Taking our experience from our highly popular F80 springs, the goal with this offering was to lower the M3 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.4"

Rear Lowering: 0.7"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less
Emmanuele Design - Corporate Logo
T#:35154917
Part#: EMD-G87-LS
In Stock
$ 349.00 USD
Free Shipping on orders $49 and up

After much anticipation, we are pleased to release our lowering spring kit for the BMW M2 G87 platform! Taking our experience from our highly popular F-chassis offerings, the goal with this offering was to lower the M2 by a tasteful amount while keeping ride quality the same or better than stock. After multiple prototypes and valuable user feedback, we believe that we met our goal. 

Our lowering springs are specifically designed to utilize the factory dampers. They are fully compatible with both standard as well as adaptive suspension. Each spring is made in the USA to our unique specifications for rates and geometries. The springs are made of high tensile chrome silicon and each unit is shot peened, pre-set, and 100% tested to ensure all the critical dimensions and rate/loads are within tolerance. The springs are then powder-coated with a stealth black finish for an OEM appearance.

Front Lowering: 1.3"

Rear Lowering: 0.75"

Stock Front Rate: 186 lb./in.

EMD Auto Front Rate: 194 lb./in.

Stock Rear Rate: 608 lb./in.

EMD Auto Rear Rate: 645 lb./in.

Show More Show Less

Spring Upper Pad - Priced Each 175538
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:15280252
Part#: 31336852465
Ships in 4 Business Days
$ 22.99 USD
Free Shipping on orders $49 and up
Spring Seat
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:16907169
Part#: 31331091867
Special Order: No Guaranteed ETA
$ 10.99 USD
Free Shipping on orders $49 and up
This pad is used as a bushing between the spring and strut. After time the pad wears down and causing front end noise.

Febi - Corporate Logo
T#:56110294
Part#: 33536794653
Special Order: No Guaranteed ETA
New Item
$ 46.99 USD
Free Shipping on orders $49 and up
This Febi Bilstein rear coil spring is an excellent, budget-conscious OE-quality solution to fix your chassis's sagging performance.

Front Spring - Priced Each
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:641653
Part#: 31336759388
Special Order: No Guaranteed ETA
$ 49.99 USD
Free Shipping on orders $49 and up