BMW Springs

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -3/4-1.0" (19-25mm)
  
• R: -3/4-1.0" (19-25mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2012+ F30 BMW 335i X-Drive 340i X-Drive - Sedan

Enhance the handling and performance of your BMW with the Turner Motorsport Performance Springs. These performance springs feature increased spring rates to reduce body roll, tighten up handling, and lower the vehicle's center of gravity without sacrificing street comfort. With reduced dive under braking and squat under acceleration, these springs provide a more controlled driving experience. Additionally, they come preset to prevent spring sag and are shot-peened for stress relief.

Key Benefits:

• Reduces body roll for improved handling
• Decreases dive under braking and squat under acceleration
• Improves grip for enhanced performance
• Lowers the vehicle's center of gravity by 1/2"
• Preset to prevent spring sag
• Shot-peened for stress relief

Enhance your Mini's handling and aesthetics with H&R Sport Springs, engineered for optimal performance and style. These springs feature a revised spring rate, providing improved driving comfort and excellent handling characteristics. With a slight lowering of 1.4" in the front and rear, H&R Sport Springs offer a more aggressive stance while retaining stock ride comfort. Experience enhanced cornering ability and a sleeker appearance with H&R Sport Springs for your Mini.

• Improved driving convenience with great handling characteristics
• Slight lowering of 1.4" in the front and rear
• Retains stock ride comfort
• Adds a slightly aggressive stance to your Mini
• Enhanced cornering ability for a more exhilarating driving experience

Improve your BMW's handling and performance with these carefully engineered performance springs. Designed by Dinan, a premier tuning company with over 35 years of experience in BMW modification, these springs offer increased spring rates to reduce body roll and enhance control. The slight lowering effect lowers the vehicle's center of gravity without compromising daily driving comfort. The springs also reduce dive during braking and squat during acceleration, providing a more controlled driving experience.

• Reduced body roll for improved handling
• Decreased dive under braking
• Enhanced grip for better control
• Moderate lowering of 3/4" for a sporty look
• Preset to prevent spring sag and maintain performance
• Shot-peened for stress relief, ensuring durability
• Earns 2 points toward your Dinan badge
• Backed by a four-year, 50,000-mile warranty

Upgrade your BMW with Dinan's performance springs, a total package approach that preserves the original driving feel while delivering balanced and enhanced performance.

The perfect answer for cars equipped with electronic shocks: H&R VTF Adjustable Lowering Springs! More lowering, more features, and more personalization. Lower your vehicle with world-renowned H&R Sport Springs and have the advantage to fine-tune lowering to your own taste. Adjustable down to the micro millimeter and with an average lowering range of 0.30 – 2.7” depending on application, your stance can now be as unique as you are.

H&R VTF (Verstellbar TieferlegungsFedern) are specifically designed and tuned to work with factory damping for superb ride and great handling. All H&R components are crafted for strength, resiliency, and durability, and are 100% made in Germany.

F82 M4 - Lowering of 1 - 1.6" Front and .75 - 1.2" RearF82 M4 - Lowering of 1 - 1.6" Front and .75 - 1.2" Rear

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: -1/2" (12mm)
  
• R: -1/2" (12mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2009+ F01 F02 BMW 750i 750Li 750iX 750LiX

Dinan Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Dinan BMW springs are carefully engineered to work within your car's suspension travel and to improve suspension geometry. Spring rates are slightly stiffer than stock and dialed in to reduce bodyroll. A stiffer suspension makes the car more fun to drive and the lower ride height improves the looks by reducing wheel-fender gap.

Dinan spring specs -

• F: 1/8" (3mm)
  
• R: 1/8" (3mm)

Fitment note: When used with stock shocks the Dinan Ride Quality Kit is strongly recommended. The Kit consists of shorter and stiffer bump stops and spring perches that work better with the lowered ride height of these springs. While not explicitly required, less than favorable ride quality and handling may result without them.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The springs are worth 2 points towards your Dinan badge (Ride Quality Kit is worth 1 point).

This item fits the following BMWs:
2007-2013 E93 BMW 328i - Convertible